Skype freezes after completing the registration form

Similar Questions

• Automatically connect to the secure area when you submit the registration form?

  Is it possible to automatically open a session someone in a secure area when they finish the web registration form?

  We have created a web form that adds users to a secure area and we have redirected this form to our secure area desired landing page.  However, the landing page is promting the users to enter their login before information it will display the page.  Is it possible to automatically open a session in the secure area when they support the registration form (so that they automatically see the content of the page without having to connect)?

  Thank you

  Jason

  Hi Mario,.

  Thanks for your quick response.  I found the problem.  I am using a subdomain and the registration page as the start page for the subdomain.  For some reason, BC did not like this.  When I went directly to the page, it worked fine.

  -for example, when I went to the trituns.com/testregstration.html page, everything worked well and I could record and see the secured information.  (FYI - these aren't the actual URL - examples)

  -However, if I tried to go to testreg.trituns.com with the testregistrationl.html page to set as the start page for the subdomain, the system would allow me to fill in the electronic registration form and add me to the secure area, but it would not open automatically log me into the secure area.

  - As a work-around, I created a new redirect page that is the start page for testreg.trituns.com that takes people to the page complete trituns.com/testregistration.html.  ... This isn't an ideal solution, but it seems to work for now.

  Thank you

  Jason

• Email missing to complete the registration

  I just bought my Toshiba a few days ago. I filled all my contact information and s/n mobile, etc and they have been validated. However, at the end of the process I was asked to send e-mail (or fax) the invoices from my laptop to an e-mail address to register. But I had a connection problem and I lost the e-mail address the page told me to send the document.

  I've looked everywhere and I have not found the specific address. It was English I think because it was also a phone number from England, if I wanted to communicate with them at the base.

  Can you please help me complete the registration?

  If you can't tell me the exact address, can you tell me who should I contact in Serbia for this problem?

  Kind regards
  Marko

  I recommend you contact Toshiba s hotline in Serbia. They will explain how to proceed and what post or fax number you can use.

  You can also try to contact s Toshiba authorized service provider in Belgrade.

• Ligtroom 6 best, I will describe my problem once the hour 1. After 4 weeks, I get the message "trial version Ligtroom 6 expired 2. You will be asked to fill out my license number 3. After completing the restart and get the message "error 16" 4. Never

  Ligtroom 6

  Better, I will describe my problem once right

  1. always after 4 weeks, I get the message "trial version expired Ligtroom 6a

  2. you will be asked to fill out my license number

  3. After completing the restart and get the message "error 16".

  4. all again manager install Adobe again and install this once again repeated problem Ligtroom each month can ensure that this stops my version is a purchased official version

  Now repeat the problem after only 4-5 days!

  Caveat! I'm not a computer specialist are not too complicated solution

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Cancellation of WIP job after completing the work

  Hello everyone,
  
  There is a question of "Annulant the WIP job after completing the work.
  
  Please let me know how to solve this or workarounds.
  Give me the navigation please.
  
  
  Thank you

  Hi Adam;

  Please search your question in metalink as cancelling WIP Job there are 272 available docs. Please check. The best way to check your question in these docs

  Respect of
  HELIOS

• Computer freezing after installing the game disc

  My son's new game disc [I guess that the conditions were not enough on our computer to it] was freezing so we tried to uninstalled but it is now the computer continually freeze after short periods of time. Every time restart us the disk check rises but stops at stage 3 and is not able to finish.  Perhaps we did not uninstall completely is?

  Error C0000185 is "STATUS_IO_DEVICE_ERROR' -"the I/O device reported an i/o error."it seems that the hardware is defective.  Disk Diagnostics should be available on the website of the manufacturer of the disk.

• "Nobody connected." when accessing the registration form - buy.

  So, I found a bizarre situation that I can't understand what is the cause.

  Let's say I have create a new account for my secure area. Once created, the Web site shows that I am logged in as this user.  I then add a product to my cart and visit the shopping cart page. Everything always seems fine.  At the moment I have select withdrawal and visit the page of registration-Buy, the site says "No one connected." Generally, certain information such as name, surname, etc. are pre-populated based on who is connected.  Now, everything is empty.  When I enter the payment details and try to purchase, I have the following error:

  ERROR: You have removed your web form. Please log on to the administration panel of your Web site and remove the form previously submitted from the page web that you last visit. You have to re-create this web form by going to the Modules-> Web Forms. After recreating simply insert this new form of web in the web page and your web form should work fine.

  
  

  Now, I did some research about this error and I do not think that anything has to do with this case.  The payment process still works, except when you create the right to connect before ordering.  If I click on any other page on my site, it indicates that a user is connected.  But once again, once I return to the page of registration-Buy, it shows "no one connected."  If I stop and restart my browser (sometimes my computer) and clear the cookies, the new user works perfectly when you purchase an item.  The problem occurs only when a user is created, then goes straight through the purchase of an item.

  
  

  I'm still not quite sure where to start troubleshooting.  Any help would be greatly appreciated!

  
  

  Thanks for all your help!

  
  

  Mark
  

  As Mihai request, need of the URL.

  If you take a modern login form you will see that it connects to the URL worldsecuresystems and a sponsor of the direct field. Even if it is buggy and you do a manual tweak and changes to make it more robust.

  You can also see that if you create a form with the registration area. If you manually update the action in the shape of a normal shape you won't have the intelligence necessary to log in two versions of area (safe and normal).

  An example of a form of signature for a zone:

  {module_o id} https://yourdomain.worldsecuresystems.com/FormProcessv2.aspx?WebFormID=43775&OID= & OTYPE = {module_otype} & EID = {module_eid} & CID = {module_cid} & CC = {module_urlcountrycode} & restart Refe = {module_siteurl, true, true}

  Who must you keep connected on the payment form, in order to check what is in the action of your form, and then go from there.

• Captivate 5.5 - event video freezes after completion

  Hi all

  I am trying to create e-Learning courses.

  I want to have a video in a slide. Here are my requirements:

  (1) video should be a video of the event.

  (2) I need to control the video of the event with the controls of the player project is to say there should not be two player controls

  (3) at the end of the video, the course should go to the next slide

  Note: I can't insert video slide corresponding to the duration of the slide. The goal is to use the video of an event like video slide corresponding to the duration of the slide.

  Test 1: I've selected calendar as "precise moment" and enter the value equivalent to the duration of the video. Also check the 'synchronize with the project.

  Issue here is that, whenever it is buffering, time differences and the progression to the next slide slide, before even the video ends

  Test 2: I selected the date in the form "video time" and checked the 'synchronize with the project.

  Issue here is that the project is frozen after the end of the video and does not progress to the next slide. Even the manual control of 'Fast forward' or 'Play' will not work.

  Tried to change the blade that is identical to the duration of video duration timing less than video and more video. There is no use.

  I understand that it's complicated. Any idea or suggestion to remedy this problem?

  Thank you and best regards,

  Bruno Arunjunai

  Hi all

  I couldn't find the reason why even the video hangs after completion while setting the date in the form "duration of the video.

  However, I found the means to my needs.

  I added the video of the event. Hourly, has selected rest of slide and disabled the "slippage to break until the end of the video" checked synchronize with the project.

  From now on, there is no problem.

  Thank you best regards &,.

  Bruno Arunjunai

• Cannot complete the registration process of the CS6 due to the error of the Adobe ID

  I just installed 13 copies of the CS6 in our studio, 12 with success, but we have problems. The registration process takes place without problem using our certificates is Adobe, the problem occurs when we have to enter the Adobe ID at the end of the process. The sappear two option, sign up later or log in now. Once we click sign in now it's just getting the spinning wheel of boredom, can't do anything. of course, the problem is it says that you have 7 days to do so before the application unusable.

  So what is the problem and how can I fix this and what should do with all of this in an Adobe ID? We have legal licenses, why do we also need an Adobe ID to complete the process

  Graham

  I had the same problem and contacted Support several times before finally found it must be my setup "corporate network".

  This is partly because Adobe is now require that use you your Adobe ID to save CS6.  See the link below:

  Adobe ID required for version beta of Photoshop CS6 and upcoming CS 6 products

  http://blogs.Adobe.com/OOBE/2012/03/Adobe-ID-required-for-Photoshop-CS6-beta-and-upcoming-CS-6-Prod.html

  After several conversations 'live' with Adobe support they gave me a link to directions for a work around.  The problem was our "corporate network" configuration, so what happens on every computer that you install CS6 on when you are connected to a network of "enterprise".

  To work around the CS6 registration on a "network of the company" error, you must do one of the following values: disable the proxy server, disconnect from the internet completely to use the offline Activation option or use another internet source external to complete registration CS6.

  Adobe technical support directed me to a forum on how to disable the proxy server, but really all you need to do is disconnect your internet, source and then you can generate the codes that are required to complete your registration with the option to enable offline. It worked for me, I'm ready now.

  See the links below:

  Support Forum link technique Adobe

  http://forums.Adobe.com/thread/1005256

  Offline activation
  https://exception.licenses.Adobe.com/AOES/AOES/v1/T1?locale=en

• Confirmation of password in the registration form

  I created a registration form using coldfusion and javascript. I created 2 fields for the password, the 2nd field, form.password2 is a confirmation to determine whether it is equal to form.password.
  I enclose the code of the toe. What could I add the code to make it work?
  Or where I'm going wrong?
  

  Looks like you might be abusing sharps. It also seems that you are missing a comma after the "NULL". Try this:

  
  
  
  
  "#Form.password #"
  
  NULL,
  
  

• Change the text in the banner "Please complete the following form.

  I designed a form for electronic distribution. I want to make it clear to recipients that they must download the form their desktop before completing it. [I hope], this will solve the problems with browsers.

  I can overstrike the banner text "Please fill in the following form"? If so, is anyone know how?

  Of the Document Message Bar is fixed - for security reasons, you cannot change the text or turn off the bar.

• Problem with the update of the registration form

  I have a registration form to update that uses a < cfquery > function and has (among other areas), an optional file input field and two separate fields to specify the file name and the file type. I don't get any errors when I submit the form, but it does not update the record and not redirects to the page specified in the < cflocation > function. Instead, it reloads the page updated with all the deleted values record. The cfquery function is copied below. Any ideas what I'm missing? I am relatively new to CF and sql, but comparing to other forms of record update I have for other tables, I can't find a problem.

  <cfif IsDefined("FORM.MM_UpdateRecord") AND FORM.MM_UpdateRecord EQ "content_edit">

    <cfquery datasource="everettweb">UPDATE Content

  SET Page_URL=<cfif IsDefined("FORM.Page_URL") AND #FORM.Page_URL# NEQ "">

  #FORM.Page_URL#

  <cfelse>

  ''

  </cfif>

  , Page_Category=<cfif IsDefined("FORM.Page_Category") AND #FORM.Page_Category# NEQ "">

  #FORM.Page_Category#

  <cfelse>

  ''

  </cfif>

  , Content_Description=<cfif IsDefined("FORM.Content_Description") AND #FORM.Content_Description# NEQ "">

  #FORM.Content_Description#

  <cfelse>

  ''

  </cfif>

  , Content_Heading=<cfif IsDefined("FORM.Content_Heading") AND #FORM.Content_Heading# NEQ "">

  #FORM.Content_Heading#

  <cfelse>

  ''

  </cfif>

  , Content=<cfif IsDefined("FORM.Content") AND #FORM.Content# NEQ "">

  #FORM.Content#

  <cfelse>

  ''

  </cfif>

  , Image_URL=<cfif IsDefined("FORM.Filename") AND #FORM.Filename# NEQ "">

  /images/#FORM.Filename#.#FORM.File_type#

  <cfelse>

  ''

  </cfif>

  WHERE ID=#FORM.ID#

  </cfquery>

    <cflocation url="#FORM.Page_URL#">

  </cfif>

  Thanks for any help you can provide!

  Jeremy

  Okay, so I rebuilt the page, and it worked. When I compared both versions it looks like when I did a montage for the sql, I had a bit of redundant code in the form that would throw things off. Thanks for all your help!

  Dan, with regard to the two types of variables, the URL variable that's so I can fill in the form with the data in the existing record. Here's the process:

  -Main page has a link to change the content, which is identified by the ID number.

  -The link change calls the form of update: content_editor.cfm? recordID = #ID #.

  -A queries on the calls page of content_editor.cfm for the data Records using the url variable (because at this point, it is the only remaining identifier from the previous page) to fill out the form.

  -A second query updates the record on form.

  If there is another way to do it, I don't know. I left Dreamweaver show me one way, and then I adapted this method to a couple updated various registration forms. I'm certainly open to other suggestions!

  JAW

• Error-1074360293 (IMAQdx Timeout) after completing the acquisition for some time

  My vision in LabVIEW application makes several acquisitions and successful treatment but then acquiring (grab) suddenly fails with a timeout error (-1074360293, IMAQdx: timeout). The error does not when acquiring only the images.

  After that the error occurred that no acquisition is possible. Although LabVIEW is closed MAX Returns a time-out error. Only restart helps.

  some details of the material:

  3 controllers FireWire (1394-a)

  3 cameras connected to the first two controllers, one third (total of 7 cameras)

  Mode for all cameras: 1280 x 960 Mono 8 fps 7.50

  The bandwidth for a FireWire controller is sufficient. (Three cameras on a single controller are running without any problem).

  Consume the application memory is short before or after that the error occurs. But I can't find where exactly.

  Until the error occurs a few minutes until one and a half hour pass.

  More details will follow.

  Is there a FireWire or specialist in the vision that can help you?

  Greetings,

  SHB

  Change the driver it seems to fix the problem:

  "Compatible (legacy) 1394 OHCI host controller" (in German: "OHCI - 1394-Hostcontroller (alt) konformer")

  With this pilot test has worked for more than 66 hours without raising an error.

  Some Articles about:

  http://www.RME-audio.de/forum/viewtopic.php?id=9827

  http://www.myvideoproblems.com/ProblemPages/CannotCapture.htm

• Does not start the web page after completing the configuration

  I have a problem with vCD 5.5.2 running on my lab at home. I made sure that all the prerequisites are met. The cell has been initialized properly without one mistake and I'm still not able to launch web page, no idea why this happens?

  vCD is installed on CentOS 6.x

  I enclose cell.log

  I hope someone can share his thoughts with me.

  Thus, all the cell.log told me is that the service obtained running.

  vCloud-container - debug.log will tell me if there is an error after starting the services.

  If this is a new installation of the OS, the firewall blocks outgoing default HTTPS traffic.  can you try to disable just the firewall for a short time, restart vmware-vcd service, wait for the cell.log to show finished, and then try again?  The firewall is the most common question on the newly installed outside the research forward/reverse DNS is not configured for both HTTPS and ConsoleProxy Treaty.

• Not drop-down list values in the XML that is generated after completing the form

  Hello

  I have a form that has a drop-down menus of the filling of an XML file, the items in drop-down list to a text and value associated with it.

  The problem is when I generate the XML of the form value labels are coming in instead of the text in the drop-down list.

  Pls help. How can I get the text of the value of the dropdown list selected in the XML file?

  Thank you

  Ludovic

  Hello

  I would recommend going to the object > linking the palette and deselecting 'specify values ". In this way, the display values will be included in the XML, as the display value will be the same as the .rawValue from the drop-down list.

  However, this means that any script that references the drop down menus will use the values to display for the items and not the previous related values.

  Hope that helps,

  Niall