6229 precision Vs resulotion

Similar Questions

• About precision for PCI-6229

  We use PCI-6229 and make the following wiring: released AO1 is connected to the entrance of the AI6, AO0 output is connected to the AI7, Both AI6 AI7 are configured and wired in incremental ways. I have checked the wiring, grounding, plug on the accuracy, the calculator of accuracy on the web site OR.

  We have a small application that writes some values to the AO channels, which, in turn, go directly to the channels to HAVE it.

  The application writes the values of every 1000 msec, playback is every 50 milliseconds.

  That is the problem. For the first pair (AO1-> AI6) values are very close, but the second pair on the same terminal (AO0-> AI7) are very different. And the tension of surplied at AO, the greater the difference.

  I read that the accuracy gets worse when the voltage becomes smaller, but why accuracy is so different for channels on the same card?

  Here are a few values.

  AO1                AI6                   AO0                AI7

  0.011477 0,011719 0.006868 0,007812
  0.011464 0,011719 0.006855 0,007812
  0.011503 0,011719 0.006855 0,007812
  0.011509 0,011719 0.006797 0,007812
  0.011490 0,011719 0.006823 0,007812
  0.011477 0,011719 0.006907 0,007812
  0.011516 0,011719 0.006823 0,007812
  0.011522 0,011719 0.006810 0,007812
  0,015625 0.012691 0.008088 0,011719
  0,015625 0.015488 0.010854 0,011719
  0,015625 0.015566 0.010919 0,011719
  0,015625 0.015514 0.010834 0,011719
  0,015625 0.015521 0.010867 0,011719
  0,015625 0.015527 0.010873 0,011719
  0,015625 0.015482 0.010854 0,011719
  0,015625 0.015508 0.010880 0,011719
  0,015625 0.015495 0.010899 0,011719
  0,015625 0.015514 0.010860 0,011719
  0,015625 0.015462 0.010821 0,011719
  0,015625 0.015514 0.010821 0,011719
  0,015625 0.015547 0.010828 0,011719

  Thanks in advance.

  Hello vera,.

  Our maps of the M series have a digital-to-analog converter, separate for each channel of the AO.  Thus, each channel AO will have slightly different properties and inaccuracies, but they will all conform to specifications.

  Kind regards

• How long can I count edges on a USB-6229?

  I have a USB-6229, and I want to count the edges using one of the built-in meters.  My question is what is the maximum frequency that the meter can the edges of the County of my signal?  (I will not mention what my signal frequency because I want to know how to determine the maximum value...)

  Hello

  Napo2 really seems to ask questions on the highest frequency that can be introduced to the counter to an external source.  The best spec for this is the counter 'external clock frequency Base', found in the specifications of 622 x, which claims 20 MHz.  The factor limiting here really is the bandwidth of the digital front end on the PFI lines.  Internally, the meter is able to count the time base of 80 MHz directly, but a signal to this rate would be completely mitigated by the digital front end of the card if you tried to pass from an external source.  The 20 MHz depends on having a square clean wave to come in the card, even if it is not very precise about the time of ascent or minimum pulse widths.  You might be able to go a bit beyond 20 MHz, if you have a very clean signal (and conversely, might not be able to hit 20 MHz if signal is not a clean square wave).

  This KB previously bound doesn't seem to not relate to the original question of Napo2, and it is also somewhat misleading in general:

  The measurement of the period is determined by the frequency source that can be acquired. For Counter/Timer boards, the highest frequency, we can accurately measure will depend on the time base higher frequency for the individual Council.

  It's true, in the sense that the higher frequency time base is a factor that plays in the precision of a measurement of the period.  However, the KB seems to imply that the maximum that can be measured is the inverse of the maximum time base and does not give further guidance for the determination of the accuracy of the measurement period.  A better reference (if you were interested in these things) would be the table in the Manual X series, but even once, this is not really related to the original question.

  Best regards

• Precise control of mixer

  Hello

  I wonder, is it possible to precisely drag/move/move and knobs in Logic Pro X mixer? I mean that normally if you click and hold the slider and make it slide simultaneously works normally. But as I remember in other DAWs method with using the key 'control', or 'command' or something like that and that didn't exist by dragging the sliders is very slow with accuracy.

  But I can't find this option in Logic Pro. Could you help me? Thanks in advance for any help.

  I'm sorry for the stupid question, I would never ask for such a thing in the forum, but I really just spend an hour to find the answer in google. Without doubt, I used the wrong keywords, but I tried a lot of things and found nothing that helps me. So maybe you could help me?

  "Hold the SHIFT key while dragging the Volume knob to change the volume level of the finer increments"

  http://help.Apple.com/LogicPro/Mac/10.2.3/#/lgcp8ec34eec

• Site not showing with precision cursor

  On my website bxcell.com cursor home page of the Web site visualizes with precision. It is supposed to be a slider full page. It works in all browsers except Mozilla. More recently, he appeared with the updated version to 42.00. I tried to disable all extensions/plugins, and of course to clear all cache. The error is still there.

  Hmm, the style sheet http://bxcell. com/wp-content/themes/Divi/includes/builder/styles/frontend-builder-style.css?ver=2.5.3 contains this rule:

  .et_pb_slider { position: relative; overflow: hidden; }
  

  If you disable the overflow: hidden on this div, the slider rule extends to the entire width. But... which shouldn't be necessary. I can't understand why this div does not extend to any of the default width. Perhaps a question to the author of the theme?

• Why full screen become Office precision?

  Well, as everyone probably - know everytime I go full screen its future's own space and ranked last in space than precision.

  Both cases make it so boring, and after searching around the internet preference and manufacturing system it stops

  I ask the guy if there is no solution to the problem? I want to stay in the same order as before the full screen fullscreen.

  Thank you

  This is the default behavior according to the standard convention.

  Mission control, you can drag any full screen in any order that you want to reorder.

  You will have solutions that suit you better in  > Sys Pref > Mission Control

  

• Mac anti-virus precisa?

  OLA Pessoal

  O Mac some anti-virus precisa?

  O Mac não precisa others anti-virus software. SE você instala-lo, o seu Mac shivers go deteriorar - themselves.

• HP Pavilion - 15-ab045sa: a few gestures of precision Touchpad not working not

  Hello

  I'm new to the forum, so I hope I posted in the right place.

  My product: HP Pavilion Notebook - 15-ab045sa (ENERGY STAR)

  I have all the gestures of touchpad usual work (three stroke of finger etc).  However, the recent to THE introduced a new gesture to switch virtual desktops. I was really looking forward to this update, but this gesture does not work! I tried to reinstall the update with erase everything and it still does not work!

  I don't understand why it does not work as I have a touchpad of accuracy and all other gestures of work except this new! Also even if some gestures of work (for example three finger swipe), I don't think that win 10 recognizes the touchpad of precision like under settings of the mouse and Trackpad, what it does not say that I have a touchpad of precision and so does me no options to change what are the gestures, as it should.

  I have the Synaptics TouchPad of SMBus 19.2.11.38 driver (21/07/2016).

  Would really appreciate your help as I was really looking forward to the new gesture switch virtual desktops.

  Thank you.

  Just got an update via windows update Synaptics update to version 19.3.11.37 - it finally allowed me to have the film 4 finger to switch virtual desktops!

• Other than the precision repair

  My beloved RX1R Sony needs help.

  I had 2 experiences with precision for repairs and was not at all happy with either (repair has not fix it-problems with cam continued after the repair, no information is available to me re: what repairs were made, terrible communication, etc..)

  Is there any other authorized Sony repair centers - that do a great job and are very reputable, communicative and reliable?

  Thank you.

  Their website says they do: "our technicians are also experienced in the repair of projectors of slides from Kodak, Polaroid cameras & SONY, Minolta, CASIO, Panasonic, Hasselblad products."

  Try to give them a call.

• Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  OVERVIEW
  Introduced	June 2012
  Discontinued	October 2013
  Model identifier	MacBookPro9, 1
  Model number	A1286

  Edit: in fact this model number is used for some units, from a late model ' 08.

• Satellite A100-583: Question of precision mouse

  I have two of these PCs and both have what I would descibe as an irritaing.
  When you rest the mouse on the reduction, enlarge, close window boxes is not always accurate. It also applies when the selection OK boxes etc. If you are not good in the Middle, it doesn't work, makes a 'ping' annoyong and you have to move the mouse somewhere else, click on an empty space or something, then come back and try again.

  Also by selecting the bar on the right for slide down can lead to the reduction in the window and sometimes I had to enarge the screen several times after trying. I've never had this problem with another laptop or desktop.

  He made slecting the items in the drop-down boxes difficult and uncertain, especially passwords!

  I've noticed it seems to happen when selecting with one tap instead of using the button on the left which seems more accurate.

  Sometimes by tapping a small box appears which in itself has a button down with a high and arrow. It would seem that there is no use for this little box is?

  I know there is a pointer precision option, but it does not help in this case.

  Post edited by: d_j_c

  Hello

  Sometimes using the touchpad, or only with a USB mouse?
  To me, it sounds like a problem of Windows operating system and not a hardware problem.

  As described, try to update the driver for the touchpad. What happens if you disable the Touchpad with FN + F9 and use only the mouse?

• Bootcamp precision of the touchpad

  Hello!

  Apple! Do a precision touchpad driver for windows 10. Bootcamp update! I will buy another computer on your part if you do! Hurry up!

  In addition, the people wrote on a touchpad ++ program that I am convinced is malware and will not download. Installing drivers summary is how good computers to turn into the Clipboard.

  Thank you.

  DR

  +1!!!!

• My IPhone 6s did the update of battery charge you change the time manually or time zone. I wonder if the problem is in the IOS or mobile phone? I say that because I changed my IPhone in a Bar in engineering (Brazil) 6, precisely because of this problem an

  My IPhone 6s did the update of battery charge you change the time manually or time zone. I wonder if the problem is in the IOS or mobile phone? I say this because I have changed my 6 IPhone in a Bar of genius (Brazil), precisely because of this problem, and the new cell has exactly the same problem

  This is a known, problem if the time is not set correctly.

  us-not-displaying-accurate-battery-data http://AppleInsider.com/articles/16/01/16/Apple-promises-Fix-for-iPhone-6S-6S-pl

• Some keys on my MacPro keyboard have suddenly changed character. More precisely: move 2 product "instead of @;" Shift 3 product £ instead of a hashtag. and two RBI Maj @. I rebooted and checked the settings keyboard without result.

  Some keys on my MacPro keyboard have suddenly changed character. More precisely: move 2 product "instead of @;" Shift 3 product £ instead of a hashtag. and two RBI Maj @. I rebooted and checked the settings keyboard without result. It worked fine yesterday and has not been moved since then. What should do?

  Check the sources of the system/preferences/keyboard again.  You have active the British PC keyboard.  Remove it and make sure that you have only on the list.

• need to precise specifications

  Hello

  I was wondering, as many models may come with different components, where should I look to find out what components are included in the laptop?

  In the example, lets take this laptop lenovo:

  http://www.linlap.com/lenovo_thinkpad_edge_e530

  I don't want to buy one with the broadcom as a means of broadcom wireless adapter * Beep * problems with linux Os.

  All online stores just tell that you have wireless on the laptop, but not if it is a braodcom or intel centrino adapter.

  What I know, is a reference to lenovo (NZQMCMB in a store I was looking for), but I can't find the detailed specifications for it (not even on the lenovo Web site).

  so... How the hell I can understand the innards of this laptop?

  Thank you

  I fear that we are reaching the limits of my knowledge. Here are a few thoughts:

  Some machines _do_ specify what card is available. On the Thinkpad T series, X and W (IIRC), you can switch the ThinkPad unspecified wireless Intel Centrino Advanced or Ultimate. That's what I was doing.

  Your other alternative is to download the hardware Maintenance Manual (HMM) on the Lenovo site. It gives specific instructions on how to remove and replace almost any part of one of their systems. Recently, I worked on a Thinkpad X61s and disconnected the card wireless in the process. I didn't even know that was possible.

  I imagine you want to buy the machine with the precise card you want, but if all else fails you can replace it with the card you want to (or have a shop to do this).

  Alternatively, you might consider another machine that specifies.

  Or, maybe the seller that you talk to would have access to additional information (I guess).

  I don't know no perfect solution for you, but maybe these ideas to help some.

  -JV474