Skype program displays a blank white window

Similar Questions

• iTunes opens like a totally blank, white window

  I had a problem with my iTunes for a little while. When I opened the application, it opens as a completely white/white window. I can't select or anything and even the drop-down menus do not appear / are empty. Here is an example of what I see:

  

  I looked towards the top of the system requirements and I am, supposedly to meet. See below for my info:

  • MacBook Pro, mid-2009
  • Mountain Lion, OS X 10.8.5
  • 12.3.2 iTunes

  Any help would be appreciated!

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Blank white window

  When I open Adobe Edge Code I get a white empty window that says index.html in the upper part.

  I checked my library and tried to uninstall and reinstall but nothing seems to solve the problem.

  Is there a way to get the program working again?

  

  Hey, Amanda,.

  Thanks for the screenshots and thanks for your patience to try to resolve the problem.  I have not seen Edge Code hang so early in the sequence of boot such as the menus are not filled or activated.  Also, previous reports of the "white screen" at startup are usually corrected by simply deleting the folder 'edge Code CC '.

  I know you mentioned above that you have tried to uninstall and reinstall, but maybe you could do so once more, now that Edge Code Preview 8 has been published.  Therefore, can you please try the following steps on your machine to clean and then install the last edge Code?

  1. Finder, go to your folder Applications, rt - click on "Adobe Edge Code CC.app", then click "move to trash".
  2. using the Finder, go to "~/Library/Application Support/Adobe" and check if you see a 'Edge Code CC' folder.  If you do, remove it.
  3. in the Finder menu, click Finder > empty trash... and completely emptied your Recycle Bin
  4. Reboot your system.
  5. After your system restarts, click the icon in the status bar of OS x creative cloud to display the creative cloud.
  6. Click on the applications tab, find "edge Code CC.  Click on install.

  After installed, try to launch the Code of edge of your Applications folder and see if it works this time.  Please reply to this thread and let me know what you see.

  -Bryan

• White / white window FF when aired by VNC / Teamviewer / NoMachine

  Hi, I'm a desktop PC Windows 10 remote using Real VNC, TeamViewer, NoMachine and other access.

  The point is Firefox and Chrome appear as white / white windows when opening, one thing is not happen to the native Internet browser = Microsoft Internet Explorer and MIcrosoft Edge, both behave normally. I have to use Microsoft browsers instead of my beloved Firefox.

  Could someone tell me why FF and Chrome are not disseminated, and instead, I get a blank, white, window I can nothing more than to shut it down?

  Thank you.
  PS: My client computer is a Windows 8.1 and the distance with browsers is a Windows 10.

  Hey Fulmercurio, I did some searching around and perhaps found what was causing it. Apparently in Windows 8, anything that requires a GPU treatment would not be made (ex: closed the lid of the laptop or monitor). It is possible that it may have carried forward in Windows 10.

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will need to restart Firefox before this takes effect so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select the Options under Windows or Preferences on Mac or Linux.

  2. Select the Advanced Panel, then on the general tab.
  3. Uncheck the use hardware acceleration when available.
  4. Restart Firefox and see if the problems persist.

  This solve your problems? Please report to us!

  If the problem is resolved, you should check the updates for your graphics driver by following the steps in these articles in the knowledge base:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  Thank you.

• If you are using windows it suddenly switches to a blank white screen

  Original title: white screen Syndrome

  If you are using windows, that it suddenly switches to a blank white screen, I can't get except if I use ctrl alt delete very annoying is there a set problem here? help help help

  Hi Yaxleybandit,

  Until solve us the problem I need more information on the issue.

  ·        When exactly do you get the white screen of white?

  ·        This occurs when the computer is idle or while working on this subject?

  ·        It happens when you use a particular program or is it random?

  ·        Did you do with the last changes made to your computer before this problem started?

  Also, you can open check and Event Viewer if there is another error important messages/codes related to the question and after return of the error.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• All files in Windows Explorer appear as an icon of the blank white page

  When I start my computer, I open Windows Explorer and open a folder to look at a few pictures, everything seems in good condition. All icons and thumbnails display correctly. So, I'm going and open a file to view it, or go back on the record and then go back in the. All icons that originally appeared as the icon or the correct thumbnail now appear suddenly, like a blank white page. I tried to rebuild the icon cache and don't have any managed to solve the problem. Please help me if you have any suggestions, what could be wrong... Thank you!

  Aaaah, as a matter of fact Yes! I have solved my problem. I hope this works for you also. I discovered that when I started the Task Manager and look under 'Process' there was a dllhost process that gradually consumed more in addition to my memory. It would slowly increase until that eventually the entire system would crash and I have to restart. So I solved it by putting a term simply the dllhost process. Every once in a while, however, I see the same problem product and I must go to the Task Manager to check... and of course, this same dllhost will eat all my power of transformation. So I just 'End process' on this topic again. Not a big problem because it happens less frequently than once a month to me and its an easy fix. So start up the Task Manager and see if you have a dllhost using an insane amount of memory. If so, this is probably what is causing your problem. I really hope this has solved your problem because it was a huge pain in the * for me. Very frustrating. I must also point out that the first time I tried to stop, it would just pop up again, so I had to close about 5 times in a half-hour time stretches on probably. DO NOT 'end process' on ALL Dllhost however as it may cause other problems with your computer. Just end the process if she consumes a ridiculous memory... amount as more 1 000 000. Oh yes, I also wanted to add that I was a little nervous about to terminate a process dllhost due to potential problems said it could cause, but when I finish this one, one that consumed all of my memory, no negative side effects occurred, none that I noticed.

• What is the best way to make the window of the program to display in a secondary window?

  What I did to drag the window of the program on my secondary monitor.

  But when I did, I noticed that the window of program on my secondary monitor window is different in that all the icons/buttons (for example the timer/counter... etc) which will usually appear in the program window now are no longer there when the program window is in the secondary monitor.

  I was wondering what a bad way to run the program window to display on a secondary monitor?

  Can I find out the correct way to lead program window to display on a secondary monitor?

  Thank you

  If you use the emission of mercury, then only the video full screen, no button or the menu. If you not anchored and dragged the program for a second monitor monitor Panel, it should not change the buttons he had previously. You can alternate the slot and off the power of the key/tool icon > display the transport controls.

• Hello.. I need to program installation adobe creative cloud for mac because it refuses to download on the site and when I press the download shows a blank white page. I want to send a direct download link

  Hello.. I need to program installation adobe creative cloud for mac because it refuses to download on the site and when I press the download shows a blank white page. I want to send a direct download link

  Hello

  Please see the below download link

  
  

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

• Creative cloud window is blank white without buttons or options or progress bar

  After my first continued to hang, a window pops up saying the application was damaged and reinstall. So after one install my first cc version and try to reinstall, the creative cloud window is blank white without buttons or options or progress bar.

  Hi Adam,.

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• Video full screen gives a blank white screen.

  Original title: Video full screen mode issues.

  I have a Dell desk top that is running Windows XP Home Edition. Every time I watch a TV show or a movie online and try to open it using the full screen, I always get audio, but you will get a blank white screen.  I can display mode small screen, but the mode full screen does not seem to work.  Any ideas on how to solve this problem?  Thank you.

  Thanks, but I already fixed it.  The browser is Internet Explorer 8.  No I did not any Chang recently except to IE 8.

  I was using Flash Player to view the website of lifetime television show.  I started to play the show, and while he was in NON-plein screen mode, I click with the button right on the screen, and click on properties, then I unchecked the box that appeared (there was only one box, and I don't remember what she said next to the box).

  I clicked on close or OK and then clicked on icon mode full screen, and it worked.

  Thanks for your help, if.

• 7280 HP displays a blank page before every printed page

  Newly installed 7280 works very well, but whenever something is printed, it displays a blank page before every printed page.  It is true that printing from Word, IE, Outlook, Quicken, Photoshop, etc.

  I checked all the likely culprits in dialog boxes of printing, including turning off the option of separator Page.

  Any thoughts?

  your computers are running windows XP or Vista? because in Vista, if she uses the pre-installed drivers that come with the operating system, then it prints white sheets between printed sheets. If you install the driver on the CD directly, then it solved the issue many times for me.

  so, for the properties of the printer, then go to the Advanced Options tab and click new driver. and in the wizard, select HP Photosmart 'C7200' and not Photosmart '7200' (this is the Photosmart C7280 considering). It should work.

• No updates and CC doesn't white window

  Hello

  yesterday, I had to type my phone number to connect to Adobe (because I travel between the countries of Africa that security rules are always there).

  After connect you again, I was not able to see the CC box. When I click the mouse, the desktop icon, it displays a white window.

  I realize that I was not registered when I tried to search for updates. But I can not access the updates. I tried the software, PS, or LR, but nothing comes out after the action. It shows nothing.

  I tried to uninstall CC, but the computer does not allow me. It is said that it executes the program.

  Is there a "manual way ' to update programs in addition to CC?

  Here I use the El captain.

  Thank you.

  You can download and install the updates manually at the bottom of link:

  2015 all updates of Adobe CC: directly download for Mac OS links | ProDesignTools

  However, on the issue CC of empty window, follow the procedure below and check.

  Force Quit associated Adobe all the processes like the creative cloud, CoreSYnc... etc of Activity Monitor.

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > OOBE. Open the OOBE folder and Opm.db bin file.

  Once you had trashed Opm.db file, restart the Adobe Creative Cloud app and check.

• When I went to open CC after all this I get redownloading is a totally blank white screen.

  I have the complete package of the student and he just renewed for another year. When I went to open after all this I get redownloading is a totally blank white screen. I have redownloaded then it again, same thing. Closed all Adobe programs through the Task Manager and restrated my computer, always a totally white screen of white. How can I fix it?

  Please respond to the:

  Creative cloud is empty window why?

  Creative cloud Packager white screen after the Adobe ID Login

  Re: Empty opening creative cloud app

  Blank white screen. Sign in | Creative cloud Packer

  Concerning

  Stéphane

• I went to upgrade to El Capitan, it was last night. I have a blank white screen. I tried to turn off my computer, but when I turn it back on all that I get is a status bar that shows its about 3/4 downloaded and then it goes back to a blank white thyristo

  I tried to download El Capitan. Has started last night. all I have is a blank white screen. I stop my computor waited awhile and he turned his back. I work around a status bar indicating that it is about 3/4 full, then it goes back to a blank white screen?

  I had this problem too on my iMac (21.5 inch, late 2009) and I tried to restore to the previous version and then do the update again, but I got the same results.  I also tried to reinstall OS X option of the application of the utilities on the recovery disk that took a few hours but got the same results.  Finally, I tried to restart and make a secure boot (hold down the SHIFT key when the bell rang and rejection when the Apple shows up) and I was able to get the computer to boot.  When I logged in a window pops up saying "Complete Installation" and still had 6 min.  When he finally finished, I was an able to connect as usual and everything works fine now.   My mid 2009 Macbook Pro has no problems with the update but my iMac has been a pain.  I hope this helps you and anyone else who may have this problem.

  iMac (21.5 inch, late 2009)

• Keep VI running when the display of pop-up window

  Hello

  I put a button in my program when I click on it and the meesage text appears.

  But when the window opens, the main VI will freeze until I click the OK button on the pop-up window.

  (in the example downloaded, click on the OK button, number will stop adding until I click the OK button on the pop-up window).

  Is it possible to keep the vi running when the display of the popup window?

  Thank you very much!

  Hello

  Hope this link will answer your question. You need develop your own pop up VI and launch dynamically from your main VI.