Skype will NOT work little matter what I do

Similar Questions

• Photosmart C510 c510 estn: printer will not work little matter what I do

  Very frustracted, the printer ran out of ink, I replaced all the cartridges and I continue to receive messages that the ink is required. Also the ink Error Message and the Tablet keeps asking me to remove the cartridges and clean the head I did several times. Turn turn off/on the printer, including a number of times.

  Hey @v053573,

  Thanks for getting back to me on this subject. I'm sorry to learn that the given steps did not resolve the 'ink system failure' on your HP Photosmart eStation all-in-one printer C510a.

  As per your request, here is a list of all printers that use cartridges HP 564:

  • HP Deskjet 3520
  • Photosmart all-in-in-One
  • Photosmart Premium all-in-One
  • Photosmart Premium Fax all-in-One
  • Photosmart Premium Touchsmart all-in-One Web
  • Printer Photosmart D5445
  • All-in-one Photosmart 5520
  • Printer Photosmart D5460
  • Photosmart C6340
  • Photosmart C6350
  • Photosmart C6380
  • All-in-one Photosmart 6520
  • All-in-one Photosmart 7520
  • Photosmart E-Station
  • Photosmart 5510 all-in-One
  • Photosmart all-in-one 6510
  • All-in-one Photosmart 7510
  • Photosmart D7560 h
  • Photosmart B8550
  • All-in-one Officejet 4620

  I highly recommend that you contact our Technical Support by phone queue to explore additional options before buying a replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• Web services do not work little matter what I do

  receive a new laserjet MFP M127FW and so far, everything works except eprint.

  IF I can get it to turn on, it only after that I reboot (power cycle) of the printer.

  If I try to activate it via the web management, he will never say that it has been activated, it comes from the clocks (icon of spinning that says connection)

  so SOMETIMES the web interface will tell his licence and SOMETIMES I can see the generated email in a random way, it gives me, BUT it only lasts for about 5 minutes, then Web Services turns off again.

  I have passed everyport listed in this forum and the how to created by a person here.

  I even put the printer in the demilitarized zone - still does not work.

  N-O-T-H-I-N-G fact work of Web services... period.

  I flashed the firmware to the last (has that right out of the box)

  There is nothing more for me that the user do... eprint/WebServices is broken. period.

  I saw someone say that the code that is supposed to print is the name in the generated randomly by e-mail you are given.

  and I tried to use it to register it on hpconnect but it just says: "unexpected error".

  also when I try to do things on the LCD, such as printouts of information, enable/disable web services, see e-mail, he just clocks (endless spinning icon... I left it like this the day after and it never stopped.

  IF I'm quick enough to see the generated email at random in the Web UI and then try to use the LCD screen to print the code or do something outside of via e-mail (which it appears if the web GUI shows) it is said that the services are not available

  still, I spent the last 2 days, for a total of more than 10 hours to try to make this work and IF it is enabled, I think it's just a false positive, even if enamel randomly does not appear, it does not work and then in 5 minutes, web services will be deactivated again.

  I'm not an average user, I am a veteran of 20 years of PC/MAC/setting in network, and I've never seen a printer to do that was not flat broke.

  but since this is the only thing that doesn't work do not, so far, I think that it is simply a problem of firmware.

  Finally... when trying to activate the web services the lights of the NETWORK card on the back of the printer are flashing 100% non-stop, for ever and ever... until I power cycle.

  its as if the web service is locked or stuck in a loop.

  also restore the default of the LCD or web GUI does nothing... nothing changed... and I am never presented with the initial start-up, as one might expect.

  is there a way to force the printer to one out of the box State serving anything and everything back to a factory State? (where I have to go through the initial Setup again?

  p. s.

  network settings are fine, I can print to the printer of the iPad, iphone, pc and MAC so all side 2 network works... but not Web services

  I could talk to a fantastic tech in cloud services who recalled a nun fix documented

  USE THE DNS SERVERS OF LEVEL 3! No other DNS server doesn't work
  Literally within 10 seconds does HP Web Services work!

  209.244.0.3
  209.244.0.4

  I changed my entire network in this

  Huge congratulations to cloud services!

• IGoogle will not restore little matter what I do

  I used absolutely all the instructions for the restoration of iGoogle that disappeared yesterday. It can be loaded on my android phone so I know there is still however, it does not restore as my homepage on the desktop. I tried being connected to Google and be disconnected. I type http://www.google.com/ig in homepage in Firefox options and it goes back to classic Google. If I type http://www.google.com/ig in browser I get classic.

  wightgal, you say everything works well now for you? If this isn't the case, I would suggest that you download Firefox from http://www.firefox.com and reinstall to make sure that you have a reliable installation.

  If all goes well, on the other hand, could you come in the forum and mark my previous post as a solution? Thank you!

• Time row-My HP 7510 will not align little matter what I do

  Following the advice on the HP site, I completed each step with no luck he print correctly.  I use an apple OS and frankly was very please with all aspects of this printer, until recently.  Help!

  Since you have Tech support sends you a print head, let's wait and see if that solves your problem.  If it persists, I would continue to work with technical support so that they do not close the ticket as solved.

• Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Hi SteliosArmenis,

  Thank you for keeping us posted on the State of the question.

  I see there is that the antivirus installed on the computer could not detect infections. To ensure that the computer is clean, we can run a thorough scan using Windows Defender in offline mode.

  I suggest to download Windows Defender Beta offline to a flash drive, CD, DVD or USB and then perform the steps.

  The articles explain how to create a disk and run the scan.

  NOTE: the program must not not to be run / run from the office.

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Hope the information is useful. If you need help with this problem, feel free to post you question in the forum. We will be happy to help you.

• My screensaver does not illuminate little matter what I do

  When I screen saver I usually take pictures but have tried the other options on the screen saver. I've set up properly, but my screensaver never turns in windows vista. Help, please

  Hello Grace,

  Thanks for posting on the Microsoft answers Forum.

  There are a few things you can try to see if it helps with your recording screen saver does not question

  (1) using a Microsoft Wireless mouse? If so, look at the following KB to help

  KB 911895 - the screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless

  http://support.Microsoft.com/kb/911895

  (2) you have all the video files in the same folder as your photos? This could pose a problem, you can move the videos to another

  file and try the screensaver with your photos.

  (3) try to change your screensaver to another option, click on apply and then change to your photos. See if this will help.

  (4) end of the (ehtray.exe) process in the Task Manager. Then try running the Vista Aero display.

  If please reply back and let us know if one of these suggestions helped with your question.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Movie Maker - music is not playing little matter what I do

  I'm making a movie for my best friend for her birthday. I'm trying to use some of our favorite songs as background music. I'm going to and upload music and it is important, but when I put it in the movie and I play it, no music plays. I know that the film plays because my images in the film show the way they are supposed to. The volume on my computer is in place, and I went through all the audio levels and volume. I went upstairs, hit the clip and have a level of hihgh audio in the editing mode, I hit chronology and went to sound levels, and it is up. I even checked the properties of the songs I am trying to use, and they present themselves as a .mp3. When I went on google and other things to see what could be the problem, a page said that even if the music is in .mp3 form and other forms that work with Windows Movie Maker, they can simply not work. However, some of the songs I am using, I have used in other films I've done, and they do not work yet. So I don't understand what the problem is, and I've checked everything. Is there something that I don't check? Help, please! I really need to solve this problem, because I use movie maker for both school projects, and this movie would be amazing as a birthday gift.

  Hi monkeygurlsurfs,

  If you get the sound from your pc in other programs, the problem is not hardware. Did you of updates or Windows updates or any software installed since the last time that your audio worked? Usually, if the audio doesn't work, is it a device driver conflict. Make sure you have the updated driver for your sound card from the manufacturer's website. Also, check your device manager to see if the audio device appears normal (no yellow exclamation point). You can try to perform a check of the filesystem (CFS) to see if there are any corrupt files that Windows can correct:

  The System File Checker tool:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1 click on Start -> click on all programs -> click on Accessories -> - click on command prompt, Select run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  2. at the command prompt, type the following command and press ENTER:

  sfc/scannow .

  3. when the analysis is complete, test to see if the problem you are experiencing is resolved.

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. click on Start, type System Restore in the Search box, and then click System Restore in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  2. in the System Restore dialog box, click choose a different restore point, and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Try these procedures and let us know how you do. If you're still having problems, we will be happy to help you further.

  Concerning

  Nicolas Mathieu

• I have a Dell Dimension 4500 Windows XP Pro SP 2. I have a new installation disk. Windows Update will not work and Microsoft Update will not work either. What Miss me?

  Pentium 4 CPU

  1 GB of RAM.

  Win XP Pro - SP 2

  Dell Dimension 4500

  If it will not download from this link on your PC, try another and just use a USB key to copy on you and then run it. Once installed SP 3, and then the fun begins because there are about 100 + updates after her.

• My iPad will not extinguish little matter how long I press the power button.

  Why my Ipad2 refuses to turn off no matter how long press me on and press and hold the power button?

  How can I get my rotation of the screen to work again? It has just stopped working even when switching screen lock is not selected in the settings.

  Help, please.

  Try a forced reboot. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Then, rotate the unit and try to stop.

• Skype DOES NOT work no matter how many times I have re - install.

  I have uninstalled, reinstalled, restarted my computer. I have many people, friends and family, my only way of communicating with them, is through Skype, and I wasn't on it over the weeks, because it won't work.

  I am frustrated, completely frustrated. I have a windows 7, lenovo computer, there is nothing really wrong with it from what I've seen.

  Whenever I try to open Skype there nothing to sign, it's just empty, nothing, I tried everything, nothing works. It just sits there who looks like this.

  Help, please.

  

  First try this:

  http://community.Skype.com/T5/Windows-desktop-client/can-t-login-because-there-re-no-text-boxes-to-d...

• pc speakers internal just stopped working little matter what I try

  I have a 1 year old Acer netbook.  Internal speakers worked fine, just stopped one day.  Everything else still works very well.  The speaker volume is set to 100%, went through the options help and realized what that said, but in vain.  It is frustratilng to not hear this, music, shopping channels, tube you, etc.  I'm not that tech savvy if need help.

  Hello

  1. What operating system is installed on the computer?
  2. Were there any changes made to the computer before the show?
  Check out the link and follow the steps.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  The steps described in the article applies to Vista and Windows 7.

• Importation of RAW file does not work no matter what camera-Olympus EM10 LR 6.1.1 Win 7

  Hello

  I've recently updated to LR 6.1.1 (no adobe cloud, stand-alone) and have been initially successful in the camera raw file import (.) (ORF). Yesterday a LR window jumped (I don't remember what exactly he said) that I couldn't close it with one in the upper right corner, so I pressed on proceed to discover that my LR is now a mobile version of the test that is valid for the next days 29. This wouldn't #T bother me too much if importation would continue to operate. I don't know if this "mobility" is the cause for questions. I wouldn't bother with this forum if I could chat or telephone assistance service, but unfortunately the opening hours are during my working time and they don't offer messaging service.

  I hope I explained my 'problem' clearly enough that it can be heard, I look forward to replies.

  Thanks Frank (from Germany)

  Hi Rohit,

  I've done independently was erase all the images in the SD card and shot some photos. And I have them imported successfully without doing anything else. File destination folder is c:mypictures / 2015. I do not understand why, but now it works now with my EM10. I'll try the gh2 now also after erasing all pictures (successfully!). I have no idea why, but it works now so far.

  Thank you.

• My computer died in service mi. Will not answer no matter what I push.

  Leave MY Mac Pro in average use. I can't answer. I tried the proposed fix didn't work.

  I have no idea what you have tried, but a SMC reset might do the trick:

  https://support.Apple.com/en-us/HT201295

  If no success, make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• Error, says that Firefox still works little matter what I try

  I looked around a bunch of articles help and discussions, and so far I can't get Firefox to quit to show me this error.

  I get every so often, not every time. I can't identify any consistent factor that would entail. So far I tried a new install (I deleted all FIrefox to my hard drive before reinstalling), ending the process, check the rights to default folder and delete the parent.lock file. Even after all these things, it always gives me error from time to time, maybe one out of every three times that I try to start.

  This isn't a huge problem of internet break, but it's still really frustrating. Is there anything else I can try?

  Thank you!

  A reported possible cause use 'Clear history of Firefox closing' to clear the browsing history, so if you use this and then try to exclude from the history.

  In a few days (Tuesday) Firefox 30 comes out that has a solution for some of the causes, so that can have a lot to this new version.