My computer died in service mi. Will not answer no matter what I push.

Similar Questions

• IGoogle will not restore little matter what I do

  I used absolutely all the instructions for the restoration of iGoogle that disappeared yesterday. It can be loaded on my android phone so I know there is still however, it does not restore as my homepage on the desktop. I tried being connected to Google and be disconnected. I type http://www.google.com/ig in homepage in Firefox options and it goes back to classic Google. If I type http://www.google.com/ig in browser I get classic.

  wightgal, you say everything works well now for you? If this isn't the case, I would suggest that you download Firefox from http://www.firefox.com and reinstall to make sure that you have a reliable installation.

  If all goes well, on the other hand, could you come in the forum and mark my previous post as a solution? Thank you!

• Time row-My HP 7510 will not align little matter what I do

  Following the advice on the HP site, I completed each step with no luck he print correctly.  I use an apple OS and frankly was very please with all aspects of this printer, until recently.  Help!

  Since you have Tech support sends you a print head, let's wait and see if that solves your problem.  If it persists, I would continue to work with technical support so that they do not close the ticket as solved.

• Photosmart C510 c510 estn: printer will not work little matter what I do

  Very frustracted, the printer ran out of ink, I replaced all the cartridges and I continue to receive messages that the ink is required. Also the ink Error Message and the Tablet keeps asking me to remove the cartridges and clean the head I did several times. Turn turn off/on the printer, including a number of times.

  Hey @v053573,

  Thanks for getting back to me on this subject. I'm sorry to learn that the given steps did not resolve the 'ink system failure' on your HP Photosmart eStation all-in-one printer C510a.

  As per your request, here is a list of all printers that use cartridges HP 564:

  • HP Deskjet 3520
  • Photosmart all-in-in-One
  • Photosmart Premium all-in-One
  • Photosmart Premium Fax all-in-One
  • Photosmart Premium Touchsmart all-in-One Web
  • Printer Photosmart D5445
  • All-in-one Photosmart 5520
  • Printer Photosmart D5460
  • Photosmart C6340
  • Photosmart C6350
  • Photosmart C6380
  • All-in-one Photosmart 6520
  • All-in-one Photosmart 7520
  • Photosmart E-Station
  • Photosmart 5510 all-in-One
  • Photosmart all-in-one 6510
  • All-in-one Photosmart 7510
  • Photosmart D7560 h
  • Photosmart B8550
  • All-in-one Officejet 4620

  I highly recommend that you contact our Technical Support by phone queue to explore additional options before buying a replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• Skype will NOT work little matter what I do

  "The other night Skype crashed and this error:"windows cannot find"C:\program files\skype\phone\skype.exe", I've seen other similar messages, but the solutions to those such as the abolition of Skype of HKEY_LOCAL_MACHINE don't work. Uninstalling and reinstalling are a complete joke. It is extremely frustrating and time consuming to try hard and if this problem is widespread I'll just remove Skype.

  Open this folder:

  C:\Program Files\Skype\Phone\

  Double-click the Skype.exe file. What happens now?

  Skype.exe may simply be Skype, but with Skype icon next to this file.

• If I try to type a name such as my videos in the address bar in my computer and press ENTER, it will not open.

  To the right:

  My name is Andrew Wissler. I have a Dell Inspiron 6000 running a 32-bit version of Windows XP Media Center with Windows Service Pack 3.  I'm having a problem where if I try to type a name such as my videos in the address bar in my computer and press ENTER, it will not open.  Instead, Windows Internet Explorer opens and a Google search results page comes up with the search term in the search box and results are presented.  Is it possible that I can enter the term into the address bar and open the folder?

  Thank you

  Andrew

  Hi André,.

  This is the default behavior. You will need to type the full path of the folder my videos to open in Windows Explorer. To do this, try the following steps:
  a. Click Start, click my computer.
  b. in the address bar, type the following and press ENTER: Shared Documents\My videos

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• NET framework 3.5 family update and updates for framwork3.5 net service pack1 will not install

  NET framework 3.5 family update and updates for framwork3.5 net service pack1 will not install

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  For more information: http://taurarian.mvps.org/Framework/Net_Framework.htm

• New computer, existing agency CC project will not open "the project appears to be damaged, we can't open."

  I just got a new computer and my existing projects will not open. I get a message on the launch only: the project appears to be damaged, it cannot be opened.

  I move the same project to my old MacBook Pro, and it opens.

  I move to a HP Z820 with Windows 7 and it opens.

  All use the most recent version of first Pro CC.

  New computer is Windows 10, Lenovo P50, 32 GB Ram, 256 GB SSD boot drive, QXD, Quadro M200M video screen (update driver by suggestion on the web forum). No improvement.

  Any suggestions?

  Thank you!

  Hmmm... I'm looking for on their Web site and for the side PC, see 9.2, 9.1, 9.0.2 and 9.0.1.

  What all people, from the 9 series, I don't see what should be the question. I would expect that you would be able to match the versions using their site...

  Neil

• SPA-3102 PSTN idle status, will not answer but watch sounds.

  Greetings,

  I am a complete newbie in the world of voip. I have an spa3102 and a computer virtual trixbox. When I use my softphone to compose, it makes to the spa3102 (shows the id of the last and gives a status of the appellant voip 'reply') but I get an "all circuits are busy now" and does not change the status of IDLE pstn. It also will not answer the phone for incoming calls to the PSTN.

  Outgoing stuff could be a problem of numbering plan (don't know not just guessing) here it is:

  (S0:xx. <@gw0>)

  I tried the regular (or default) (xx).

  incoming calls are supposed to go to a handset on my desk, for example ext 101 is the dial plan: (S0:101@internalip)

  I can't see the forest for the trees. Can someone give me some advice on where to look. I'm completely puzzled by something non-response externally, and why I get a all circuits are busy if there are inactive on the status page.

  an interesting note: If line1 is connected to an analog phone, it will dial a number, but always shows failover for a reason any...

  Thank you very much!!!

  Greetings!

  Thanks for the reply. I do not know if I explained properly (sounds like I don't have). I have a trixbox and I use the SPA in interface with my RTC and I want to have a fax machine (but later) on the FXS port. The problem I have is that I could not field calls to the collection. They would just ring and ring. I thought it was a dial plan (and hope it was not a hardware problem), but he just wouldn't answer the phone. He would show 'Ringing' like the PSTN status, but Voip would be "IDLE". I've been pouring through the guide of the administrator, forum messages for about 2 weeks now.

  But I didn't know what the problem was. The spa3102 is waiting until she can establish a connection (with the internal phone system) until it meets the PSTN. This is why it continues to ring. The problem why it shows it is inactive and (even with enabled full logging to a syslog box) no traffic to SIP the trixbox internal... because I had the port internal plugged in... not the WAN port (or internet). Thats right... silly me...

  I gave the wan port an address on the same subnet and moved the cable to it, once I could talk to her I change address internal to something even not on my network (if no routing problem) and left the network adapter disconnected (internal nic). Then I changed the wan to the old internal address address (trix trunk was already configured in this ip address anyway...) and PRESTO! I tried calling the number RTC and started to receive log entries showing the sip signaling and he's trying to route the call to the box of trix. It works now! So he was not answering the phone in my case, because it could not connect to the pbx or the ip phone and that because I don't use the WAN/INTERNET port on my SPA. Something I don't remember seeing in the textbooks as a "hafto' or a 'must '... I might have forgotten that of course, but I don't remember seeing him there.

  So if you enable logging, and then call this number (I used the PuTTY and 'tail-f /var/log/spa3102.log"to see the entries that they light up the box of syslog) and you don't see any sip traffic, it could be that you must use the WAN/INTERNET port instead of the internal port apparently logical... BE sure THAT ENABLE YOU REMOTE ADMIN if you decide to give it a shot.

  Also you can do the spa to answer the phone, even if it has no where to send the call (or if you want incoming people to use a PIN) on the GATEWAY PSTN - VOIP, there is a setting "off hook during the VOIP call" (default = no), but change that Yes - he would answer... and then sit there... If I had a PIN with a dial plan that is associated with this would give a fast busy after the entry of the PIN. BUT now everything is cool!

  Thank you!

• I'm reloading windows 2.6 filmmaker. But it will not download files. What I am doing wrong?

  I'm reloading windows 2.6 filmmaker. But it will not download files. What I am doing wrong?

  You can download it here. version 2.6 RELOADED
  http://jumbofiles.com/ytv6q80uvmd8
  It works on all Versions of Windows.
  If for any reason, you want to another version - I also them below.
  http://jumbofiles.com/user/uzi9mmauto/47861/Windows%20Movie%20Maker%20Editions

  But I'd go with RELOADED cause there HUNDREDS of Transitions and effects, etc.
  Theres a video on it too.
  http://www.YouTube.com/watch?v=Q4km3SB1XmQ

  Its what you want questions - I hope that I helped :-)

• Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Hi SteliosArmenis,

  Thank you for keeping us posted on the State of the question.

  I see there is that the antivirus installed on the computer could not detect infections. To ensure that the computer is clean, we can run a thorough scan using Windows Defender in offline mode.

  I suggest to download Windows Defender Beta offline to a flash drive, CD, DVD or USB and then perform the steps.

  The articles explain how to create a disk and run the scan.

  NOTE: the program must not not to be run / run from the office.

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Hope the information is useful. If you need help with this problem, feel free to post you question in the forum. We will be happy to help you.

• Adobe help desk do not answer (!). What should I do?

  I have a new MBP, a few years ago, I installed LR5 to my Mac Mini. Now, I try to install LR5 on my MBP, but I do not succeed. Adobe help desk do not answer (!). What should I do?

  Hello

  Try to get in touch with the creative cloud customer, contact customer serviceonline, they are online 24/7. quick solutions and so sweet, so professional

  Hope you find good

  Saeed Alkarmi

  Kind regards

• computer laptop 15-fo39wm: updates will not install

  I have updates that will download, but will not install

  Hi @help987 ,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you encounter a problem installing your Windows updates.

  Please try these steps.

  Method 1:

  I would suggest to run Windows Update to convenience store and check if it helps.

  (a) press the Windows Key + W key on the keyboard.
  (b) resolution of the problems of type in the search box, and then press ENTER.
  (c) select Troubleshooting. Click on show all the and select Windows Update and follow the on-screen instructions.

  Method 2:

  I suggest perform you a boot in minimum mode and disable the security software and check if you are able to install windows update manually.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  (a) press Windows + R Type msconfig in the search box and then press or click on msconfig.

  (b) the Services of the System Configuration dialog tab, tap or click to select the hide all Microsoft services check box, and then press or click disable all.

  (c) on the start-up of the System Configuration dialog tab, tap or click Open the Task Manager.

  (d) the tab to Start in the Manager of tasks, for each startup item, select the item, and then click disable.

  (e) close the Task Manager.

  (f) on the start-up of the System Configuration dialog tab, press or click OK, and then restart the computer.

  Note: once you have finished troubleshooting, follow the steps in "How to reset the computer to start as usual after a repair by clean boot " to reset the computer as usual.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Download and install the update manually and check if it helps.

  Follow the steps to install the update manually:

  a. go to the Microsoft Download Center page

  b. type the number in the search box and press ENTER.

  c. download and install the update and check if it helps.

  You can see the steps in the following Microsoft article.

  Problems with installing updates

  Good luck!