My screensaver does not illuminate little matter what I do

Similar Questions

• Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Hi SteliosArmenis,

  Thank you for keeping us posted on the State of the question.

  I see there is that the antivirus installed on the computer could not detect infections. To ensure that the computer is clean, we can run a thorough scan using Windows Defender in offline mode.

  I suggest to download Windows Defender Beta offline to a flash drive, CD, DVD or USB and then perform the steps.

  The articles explain how to create a disk and run the scan.

  NOTE: the program must not not to be run / run from the office.

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Hope the information is useful. If you need help with this problem, feel free to post you question in the forum. We will be happy to help you.

• IGoogle will not restore little matter what I do

  I used absolutely all the instructions for the restoration of iGoogle that disappeared yesterday. It can be loaded on my android phone so I know there is still however, it does not restore as my homepage on the desktop. I tried being connected to Google and be disconnected. I type http://www.google.com/ig in homepage in Firefox options and it goes back to classic Google. If I type http://www.google.com/ig in browser I get classic.

  wightgal, you say everything works well now for you? If this isn't the case, I would suggest that you download Firefox from http://www.firefox.com and reinstall to make sure that you have a reliable installation.

  If all goes well, on the other hand, could you come in the forum and mark my previous post as a solution? Thank you!

• Web services do not work little matter what I do

  receive a new laserjet MFP M127FW and so far, everything works except eprint.

  IF I can get it to turn on, it only after that I reboot (power cycle) of the printer.

  If I try to activate it via the web management, he will never say that it has been activated, it comes from the clocks (icon of spinning that says connection)

  so SOMETIMES the web interface will tell his licence and SOMETIMES I can see the generated email in a random way, it gives me, BUT it only lasts for about 5 minutes, then Web Services turns off again.

  I have passed everyport listed in this forum and the how to created by a person here.

  I even put the printer in the demilitarized zone - still does not work.

  N-O-T-H-I-N-G fact work of Web services... period.

  I flashed the firmware to the last (has that right out of the box)

  There is nothing more for me that the user do... eprint/WebServices is broken. period.

  I saw someone say that the code that is supposed to print is the name in the generated randomly by e-mail you are given.

  and I tried to use it to register it on hpconnect but it just says: "unexpected error".

  also when I try to do things on the LCD, such as printouts of information, enable/disable web services, see e-mail, he just clocks (endless spinning icon... I left it like this the day after and it never stopped.

  IF I'm quick enough to see the generated email at random in the Web UI and then try to use the LCD screen to print the code or do something outside of via e-mail (which it appears if the web GUI shows) it is said that the services are not available

  still, I spent the last 2 days, for a total of more than 10 hours to try to make this work and IF it is enabled, I think it's just a false positive, even if enamel randomly does not appear, it does not work and then in 5 minutes, web services will be deactivated again.

  I'm not an average user, I am a veteran of 20 years of PC/MAC/setting in network, and I've never seen a printer to do that was not flat broke.

  but since this is the only thing that doesn't work do not, so far, I think that it is simply a problem of firmware.

  Finally... when trying to activate the web services the lights of the NETWORK card on the back of the printer are flashing 100% non-stop, for ever and ever... until I power cycle.

  its as if the web service is locked or stuck in a loop.

  also restore the default of the LCD or web GUI does nothing... nothing changed... and I am never presented with the initial start-up, as one might expect.

  is there a way to force the printer to one out of the box State serving anything and everything back to a factory State? (where I have to go through the initial Setup again?

  p. s.

  network settings are fine, I can print to the printer of the iPad, iphone, pc and MAC so all side 2 network works... but not Web services

  I could talk to a fantastic tech in cloud services who recalled a nun fix documented

  USE THE DNS SERVERS OF LEVEL 3! No other DNS server doesn't work
  Literally within 10 seconds does HP Web Services work!

  209.244.0.3
  209.244.0.4

  I changed my entire network in this

  Huge congratulations to cloud services!

• Importation of RAW file does not work no matter what camera-Olympus EM10 LR 6.1.1 Win 7

  Hello

  I've recently updated to LR 6.1.1 (no adobe cloud, stand-alone) and have been initially successful in the camera raw file import (.) (ORF). Yesterday a LR window jumped (I don't remember what exactly he said) that I couldn't close it with one in the upper right corner, so I pressed on proceed to discover that my LR is now a mobile version of the test that is valid for the next days 29. This wouldn't #T bother me too much if importation would continue to operate. I don't know if this "mobility" is the cause for questions. I wouldn't bother with this forum if I could chat or telephone assistance service, but unfortunately the opening hours are during my working time and they don't offer messaging service.

  I hope I explained my 'problem' clearly enough that it can be heard, I look forward to replies.

  Thanks Frank (from Germany)

  Hi Rohit,

  I've done independently was erase all the images in the SD card and shot some photos. And I have them imported successfully without doing anything else. File destination folder is c:mypictures / 2015. I do not understand why, but now it works now with my EM10. I'll try the gh2 now also after erasing all pictures (successfully!). I have no idea why, but it works now so far.

  Thank you.

• Why my printer does not print no matter what doc in the my Docs section? It is used to

  I used to be able to present a paper, put it in my Docs and then call and print it out.      Now I can not one of my printed docs.    There seems to be a block print of one of my docs and I don't understand why.    It is operated from my OK ports in the past so I don't think it's the connection between PC and printer.   It's something to do with Word 2003

  What version of Windows, including the service pack is installed (right click my computer and select properties for info)?

  What is the brand and model of the printer?  How is it connected to your computer?

  What happens when you try to print?  Please report any error completely, without paraphrasing.

  What happens if you open Word, create a new document and then print (i.e. without saving changes)?

  What happens if you create a document in Notepad, save in My Documents and then try to print it?

  • Click Start > printers and faxes
  • Right click on your printer icon and select Properties
  • In the 'Général' tab, click 'print a test page.
  • What is going on?

• Windows Movie Maker - music is not playing little matter what I do

  I'm making a movie for my best friend for her birthday. I'm trying to use some of our favorite songs as background music. I'm going to and upload music and it is important, but when I put it in the movie and I play it, no music plays. I know that the film plays because my images in the film show the way they are supposed to. The volume on my computer is in place, and I went through all the audio levels and volume. I went upstairs, hit the clip and have a level of hihgh audio in the editing mode, I hit chronology and went to sound levels, and it is up. I even checked the properties of the songs I am trying to use, and they present themselves as a .mp3. When I went on google and other things to see what could be the problem, a page said that even if the music is in .mp3 form and other forms that work with Windows Movie Maker, they can simply not work. However, some of the songs I am using, I have used in other films I've done, and they do not work yet. So I don't understand what the problem is, and I've checked everything. Is there something that I don't check? Help, please! I really need to solve this problem, because I use movie maker for both school projects, and this movie would be amazing as a birthday gift.

  Hi monkeygurlsurfs,

  If you get the sound from your pc in other programs, the problem is not hardware. Did you of updates or Windows updates or any software installed since the last time that your audio worked? Usually, if the audio doesn't work, is it a device driver conflict. Make sure you have the updated driver for your sound card from the manufacturer's website. Also, check your device manager to see if the audio device appears normal (no yellow exclamation point). You can try to perform a check of the filesystem (CFS) to see if there are any corrupt files that Windows can correct:

  The System File Checker tool:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1 click on Start -> click on all programs -> click on Accessories -> - click on command prompt, Select run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  2. at the command prompt, type the following command and press ENTER:

  sfc/scannow .

  3. when the analysis is complete, test to see if the problem you are experiencing is resolved.

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. click on Start, type System Restore in the Search box, and then click System Restore in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  2. in the System Restore dialog box, click choose a different restore point, and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Try these procedures and let us know how you do. If you're still having problems, we will be happy to help you further.

  Concerning

  Nicolas Mathieu

• Skype will NOT work little matter what I do

  "The other night Skype crashed and this error:"windows cannot find"C:\program files\skype\phone\skype.exe", I've seen other similar messages, but the solutions to those such as the abolition of Skype of HKEY_LOCAL_MACHINE don't work. Uninstalling and reinstalling are a complete joke. It is extremely frustrating and time consuming to try hard and if this problem is widespread I'll just remove Skype.

  Open this folder:

  C:\Program Files\Skype\Phone\

  Double-click the Skype.exe file. What happens now?

  Skype.exe may simply be Skype, but with Skype icon next to this file.

• Time row-My HP 7510 will not align little matter what I do

  Following the advice on the HP site, I completed each step with no luck he print correctly.  I use an apple OS and frankly was very please with all aspects of this printer, until recently.  Help!

  Since you have Tech support sends you a print head, let's wait and see if that solves your problem.  If it persists, I would continue to work with technical support so that they do not close the ticket as solved.

• Photosmart C510 c510 estn: printer will not work little matter what I do

  Very frustracted, the printer ran out of ink, I replaced all the cartridges and I continue to receive messages that the ink is required. Also the ink Error Message and the Tablet keeps asking me to remove the cartridges and clean the head I did several times. Turn turn off/on the printer, including a number of times.

  Hey @v053573,

  Thanks for getting back to me on this subject. I'm sorry to learn that the given steps did not resolve the 'ink system failure' on your HP Photosmart eStation all-in-one printer C510a.

  As per your request, here is a list of all printers that use cartridges HP 564:

  • HP Deskjet 3520
  • Photosmart all-in-in-One
  • Photosmart Premium all-in-One
  • Photosmart Premium Fax all-in-One
  • Photosmart Premium Touchsmart all-in-One Web
  • Printer Photosmart D5445
  • All-in-one Photosmart 5520
  • Printer Photosmart D5460
  • Photosmart C6340
  • Photosmart C6350
  • Photosmart C6380
  • All-in-one Photosmart 6520
  • All-in-one Photosmart 7520
  • Photosmart E-Station
  • Photosmart 5510 all-in-One
  • Photosmart all-in-one 6510
  • All-in-one Photosmart 7510
  • Photosmart D7560 h
  • Photosmart B8550
  • All-in-one Officejet 4620

  I highly recommend that you contact our Technical Support by phone queue to explore additional options before buying a replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• Satellite M30X-127 does not illuminate

  Hello

  Need help!
  My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
  The guy there offered my 100 pounds for to buy me.
  Please a little help. What should I do?

  Hello

  Otherwise you will search in ebay for the second hand with the good motherboard unit.
  Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
  You can try to use second hand motherboard in your laptop.

• Equium A100 does not illuminate

  My A100 does not illuminate. Anyone have similar problems?

  I had a little trouble with the plug of the AC adapter into jack but have managed to get charged. When I put now the head in the light orange is on, but nothing else and it will not start.

  I would be grateful for any help.

  Hello!

  What problems have you had with the AC/DC adapter?

  In this case, you can do many things to get this working again, but you can try to remove the adaptor AC/DC and battery. Wait an hour and reconnect both devices and try it.

  If it doesn t work I think you will need help of an ASP. :(
  On the Toshiba site, you can search for the closest: http://eu.computers.toshiba-europe.com => Support downloads & => find an authorized service provider

  Good bye

• Helix does not illuminate

  All of a sudden today my ThinkPad Helix (1st generation) does not illuminate. When I connect to the AC adapter, the little red LED light that makes the dot over the "i" in ThinkPad flashes 5 times, then darkens.

  I can't find information on what 5 flashes of the 'i' means. It looks as if they have bothered to engineer a diagnosis like that code, it should be documented somewhere.

  I tried a different adapter with the same result.

  Can anyone provide lights, please?

  Between your question and other postings here, I was able to fix the problem:

  1. Unplug the keyboard of the tablet.
  2. Move the power connector on the keyboard for the tablet.
  3. Press and hold the power button on the tablet. (She's now on).
  4. Move the power to the keyboard connector, and then connect the tablet to the keyboard. (Keyboard + tablet now will fuel market properly.)

  Thank you!

• HP 15-d040nr: my laptop screen touch hp does not illuminate

  My laptop touch screen computer hp laptop (not sure of the name of the template) does not illuminate. My computer has problems finding networks so I restarted it by using the restart function, and when it will ever stop finished back. When I press the power button / of on the internet key light turns orange and the port on the adapter lights up as usual as well, but the screen remains black. This laptop is only a little over a year, I don't know how to fix it. I tried to unplug the adapter and taking the battery, now the power for 30-60 seconds and everything put back and that does not work, I have read a lot of forums and tried everything but nothing seems to work. If anyone has an idea of what I can do, that would be really appreciated, I don't want to consider to get a diagnosis and spend tons of money. Thank you!

  I ended up taking my laptop to a tech repair shop and found out that the problem was the motherboard - I had to pay for a new part and pay for this service, luckily the place is a fair price and only cost me the price of a new laptop. It sucks that I have had the computer for less than two years and I have to do an important replacement, but at least I know never buy another laptop HP again! Good luck!

• Windows Vista does not illuminate

  Hello

  My computer does not illuminate. I have a Dell XPS M1530 with Windows Vista. The problem started yesterday when I left my computer unplugged. When I got home, the screen was blank and I just assumed it was gone to sleep. I pressed the power button and the power light turned on for a brief moment, and then turns off again. Then I turned off the computer by pressing the power button. When I tried to turn on the computer again, the lights on top of my computer, such as A / V controls, enlightened to the mode of the normal sequence, the player makes the usual click and the power button lights up for a short while before leaving. The computer turns on then with the fan running and the little power on the front (not the power indicator main on top), but light a screen empty. Thanks to all this, the screen remains empty, including turning point works manually.

  By pressing the power button when the computer is turned on gives the same result as the first time, where the main power light on the power button lights up briefly, then turns off again without result. Pressing F8 when starting the computer also does not work. I don't know how I'm supposed to solve this problem, the screen never showed any activity during all this. Help please!

  I should note that when I turn on the computer, it would seem she's asleep sleep and rest, as the little light on the front of the computer and the fan turns slightly, while the power led is off.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It seems you might have a hardware failure, as nothing is displayed on your screen at any time after power on.

  If under warranty, contact the manufacturer of your computer.

  If not under warranty, contact a local and trusted computer repair Shop (not a type of chain stores to the repair facility).

  See you soon.

  Mick Murphy - Microsoft partner