Skype won't start - refers to the dashboard

Similar Questions

• 7.2 Skype won't start not

  I am running windows 8.1 on a desktop computer, with the latest version.

  Yesterday, I turned off my computer, and when I turned it on had a windows update. After update, Skype would not start. When I click the icon it happens under process, and as an icon, I see that Skype is on, but it can not be cut in the icon, and no window opens.

  I have already tried a few solutions, but am at a total loss about how to solve this problem.

  

  Unfortunately, the ieframe.dll module seems to be damaged and cannot be repaired.

  "" Cannot repair the military record [l:22 {11}] "ieframe.dll' of Microsoft-Windows-ieframe, Version = 11.0.9600.17690, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch

  I don't know, but the problem might have been caused by the KB3032359 Windows Update failure.

  http://support.Microsoft.com/en-us/KB/3032359

  You can try to uninstall this update.

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  Anther option is to use the system restore from there to get back before the latest Windows updates have been installed.

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• Satellite L30 PSL33E won't start at all - the LED blinks 6 times

  Hello

  My poor mother is quite upset! Its Satellite L30 PSL33E just died.

  It completely off and now won't start at all.
  Orange light flashes six times when you press the power button.
  No hard drive, fan, screen or any other noise / activity.

  She tried without the battery.

  A kind of hardware failure, I guess.

  Any ideas what this blink code means?

  Thanks in advance,
  D.

  I put t know what the code means, but you can read it. short means 0 and 1 long

  In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
  Why?

  because what is really hard to fix a motherboard for laptop very s.
  It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

  I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(

• U410 won't start - stuck in the Windows loading screen?

  Hi, I have a U410 that no longer starts. Don't know what he did stop. At startup, it loads the startup Lenovo screen, then the loading screen Windows 10 forever (balls chasing each other in a circle). I can't get combinations of keys F bring me to the BIOS. I tried to use the Novo, but not the work of options other than the restoration of the system. They all display the startup Lenovo screen, then the Windows 10 loading screen.

  I created a bootable USB floppy and USB boot, but I never have an option to get the BIOS or choose another Boot device.

  Thanks for the answer, it turns out that it was the hard drive.

  There's something corrupt on it and it wouldn't start. I took and connected to another machine, but he was not recognized by the BIOS or Windows. I returned to the U410 and starts in with the Novo button restore mode. Curiously, it worked and I was able to restore the machine back to original settings and then upgrade to Windwos 10. I lost all data on the HARD drive, but it's normal. She has been saved and most of the records is anyway in the cloud.

  Not trusing stability of this HARD drive, I decided to replace it with a Samsung SSD. It was a great experince. Samsung provides a disk copy utility that works on the HARD drive running! A took about 45 minutes to reflect the existing for the connected SSD HDD. After that, I have swapped drives, ran the optimization of SSD and it was good to go.

  The special tools required for this were opening and pry tools and an USB HARD drive adapter. There are many videos on YouTube that show how to open the laptop.

• Windows vista completely crushed hard drive won't start after installing the packs of services and internet explorer 9

  Thought I did my brother a favor so that he was at work and installed service Pack 1 & 2 on its 32-bit vista operating system, and then installed internet explorer 9 and it crashed the entire operating system nothing work, hard drive, monitor, mouse nothing. I hope this isn't a hardware problem which needs the advice of experts, the guilty feeling like I had left him only someone help with this can not start even to the bone g .thanks

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• NB200-110 won't start or allow the configuration of the BIOS

  Hello

  I am new to the forum and this is my first post.
  I help my father with the diagnosis of its mini notebook.
  Model is NB 200-110.

  In recent months, the laptop had a hard time to start.
  But after several tries, it would normally be finally start and run normally.
  Two weeks ago, the laptop won't boot is no longer at all.
  When turn on/off, you can hear some noises (HD or fan?) then the 'Toshiba Leading Innovation' screen will be displayed, but it won't pass this point.

  On the lower part of the screen, you are prompted to press F2 to enter setup BIOS or F12 to change the start-up devices, but it will respond to any key (as if no current keyboard).
  I guess that some of the material is a failure, but y at - it a way of knowing what part exactly?

  Thanks in advance for your help.
  Jean-Christophe

  Hello and welcome

  On this virtual path, it is not easy to say what the problem is here, and it is not easy to offer the exact diagnosis. Unplug the power plug, remove the battery and press the power button for about 20 seconds.
  After having done that connect the power supply only and try to start your machine. Watch carefully what happens.
  Try again with F2, F8 or F12 at the beginning upward.
  You can also try is to remove the RAM and HARD drive modules and test what happens when you do this.

  You know it's strange, if you can enter even the parameters of the BIOS, this first stage where mobile of first hardware.

• Skype won't start do not. Antedated IE and Skype does not

  Hello

  A couple of weeks ago, I started having a problem from Skype on my computer. Version 6.16, whenever I try to run Skype, the login screen flashes for a split second, but leaving the State of Skype light in the system tray (win7 he calls the "notification area") at the bottom of the screen. When I mouse over this icon, it disappears.

  I tried backdating Internet Explorer without success (which I heard was a possible solution), and I also tried backdating Skype itself in earlier versions without success.

  OS: Windows 7 Edition home premium 64-bit

  I tried IE 11, IE 10, and IE 9

  I also tried Skype 6.16, 6.9.0.106 and 5.10.0.116

  Event Viewer Windows shows no log of the program Skype crashing when Skype starts.

  Any help would be much appreciated.

  I'm afraid that you have many questions:

  First, uninstall IP camera [JPEG/MJPEG]. In several other cases camera IP was responsible for the crash of Skype.

  The question may be also with XSplit software:

  https://support.Xsplit.com/forum/viewtopic.php?t=6758

  Try to unregister the vhmediacom.dll

  http://community.Skype.com/T5/Windows-desktop-client/Skype-crash-on-startup/m-p/1414236#M116388

  The other option is to disable any source video in Skype by editing the shared.xml file:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-uses-DVB-T-card-as-camera/m-p/1445497#M12...

• Re: Satellite won't start because of the virus

  One of my computer got a virus and it was spent on my Toshiba Satellite laptop by a USB.

  Now when I turn on my laptop, the screen lights up, but remains empty (except the mouse).

  I tried system restore - it did not work. I had three points to restrore - and each of them said that the restoration of the system did not work properly due to a system error.

  I checked also the memory and everything - but I'm not avoiding the recovery of the system (the one where all the files will be deleted) that I desperately need to keep my files.

  What can I do to solve my problem?

  Hello

  I doubt that a virus could cause this problem
  I mean the virus can damage the operating system pre-installed, but the laptop has yet to start.
  The Toshiba recovery disc formats the entire HARD drive, and in this case the virus must be erased from the HARD disk too

  But if you are not able to reinstall the OS and are not able to start using disks bootable like Win XP, Linux or Toshiba Recovery disk so I assumed that this problem could be linked to the issue of the material and not to any viruses on your HARD drive.

  Then try to reinstall the OS and check it out!

• Re: Satellite U200-111 won't start and flashes the amber light DC-IN

  Hello!

  My wan't to the computer to start and the amber DC-IN led blink 2 times, pause, 3 times, pause, break, 2 times, 1 time...
  I think it means the error code 2321. Can someone give me a list of fault codes?
  Where can I find a manual for this computer repair?

  Thank you and best regards

  Sorry, but these codes are not available on the Toshiba pages
  I think that only the authorized service partner may be able to help.

  A few words about this issue;
  Still the blink code means that a hardware problem has been detected on the motherboard. Motherboard problems are still serious issues and in my opinion should always be checked by an expert.

  Also I doubt you're reading this correctly as a blink code provides still a 1 or a 0. Short means 0 and 1 long. Finally, copy the following code must be set to hexadecimal.

  In order to cut short this long history; you need a technician in ASP.

  Welcome them

• Skype won't start no-logon screen

  I just installed Skype on my computer Windows 7 Samsung, and every time I open it I'm gretted with a white screen logon that simply says Skype through it. This has happened with previous versions of Skype as well, and I don't know why. I've attached a screenshot of what I get.

  For those who need to know, my specs are:

  -2.40 GHz Intel i5 450 M processor

  -8.00 GB RAM DDR3

  -Windows 7 64 bit

  Laptop - Samsung Q430

  Thank you!

  

  Now try to IE10 to uninstall and reinstall IE9.

  In order to uninstall IE10, you should go to the Windows Control Panel-> programs and features-> view installed updates-> Microsoft Windows-> Windows Internet Explorer 10.

  http://techdows.com/2012/11/how-to-downgrade-from-IE10-to-IE9-or-IE8-Windows-7.html

• Qosmio G35-650AV - Vista won't start, freezes and the fan is noisy

  Hello

  I installed sp1 vista winwows 4times on qosmio g35 and whenever I have this same problem, and I don't know how to fix it.

  The last time I did it:
  1 installed vista
  2 installed sp2
  3 insalled all the drivers in the order I found on thosiba support page.
  then evrythings worked well, I restarted laptop several times during the installation of the drivers and vista started every time.
  4. connect to the internet and installed 3 updates from windows update after restarting:
  5. I the first vista progress bar, then the screnn goes black, the hard drive light stops and works fan max.,

  earlier, I have no internet access the qosmio, but I installed the drivers in another order and have the same problem.

  Can U help me?

  /Adrian

  Post edited by: radian

  I can boot into safe mode
  BIOS is 3.9.

  If you need more information please write

  /Radian

  This strange s feels a bit like a hardware problem.
  What happens if you install the Toshiba Recovery disk system?
  Have you tried that? If not, please check it

• "Pavilion dv6000 won't start after inserting the password

  I have a dv6000 Pavilion laptop with Windows 7 Operting System.  After a few recent updates at the beginning of my use of the computer (instead of at the end of my computer use), when I turn on the laptop, it brings up my user name and a password field, which, once I insert the password, it should redirect me to the window of the Application.  But after having inserted the password, the word "Welcome" with a circle of rotation appears on the display screen. This ' circle' rotates to progress to subject one minute and then display will Dim and never produced the home screen of the Application.  I greeted the dark screen to stay on the computer for more than 5 minutes and the House request never appears.  The only way to shut down Windows is to press Ctrl-Alt-Del, which produces a window with the following options: 1) lock this computer 2). Change user 3.)  Close the session 4) Change a password 5). Start the Manager of tasks with a button CANCEL in the center of the display and of the farm to the bottom of the icon in the lower right with the following options: 1) 2 restart.) (Sleep 3). Hibernate 4). Stop.   I used the option of doen stop to turn off the laptop.  What can I do to solve my problem and use the computer that I use for?

  Hello

  You are welcome

  I suggest you download AdwCleaner this link to delete the associated files - Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  Best regards

  DP - K

• Skype won't start

  only will launch Skype after turn repeated, walking, computer. When it does not start I hear a "bong".

  Have a problem with Skype? Ask Skype!

  Try here:

  https://support.Skype.com/

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Computer laptop 15-p047na: laptop won't start up after the Win 8.1 update

  I bought this laptop on 16 December and got with the transfer of files and my old desktop PC applications.  Everything is OK until last Sunday, when I left the laptop is a Win the day update 8.1 overnight.  The next day, he asks for a restart, but then, after initial HP logo, the screen turns white for a few minutes.  Then the Win 8 screen with a message: "LogonUI.exe - Application error.  The instruction at 0x00b1645a referenced memory at 0x00000008. The memory could not write. »

  When I click OK, the screen turns off then flashes.  The message appears again, with the same result.  I tried to start the computer from a CD and a USB key, after changing the boot sequence in the screen of the BIOS/UEFI, but with the same result.  What should I do?  Help welcome!

  Hi @agniculus ,

  Welcome to the HP Forums!

  It's a place dynamite to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that after a Windows 8.1 update, that your system does not start properly.

  First of all have you tried a hard reset?

  Here is do a Hard Reset or forced to reset.

  Here is a link to the computer does not (Windows 8) which can also help.

  You can also try of using Microsoft System Restore (Windows 8) back to the front, what happened.

  You can start safe mode?   Safe mode of Windows 8

  Safe mode, you should be able to run the troubleshooter and do the restore.

  Good luck!

• T43 won't start. Only the fan is running. Empty the screen any ideas?

  Do not start and screen in white.  Only the fan is running.  Empty the screen any ideas?

  I solved the problem of: removal of the system RAM memory chip. It started fine. Replace memory in slot. Everything works fine now. Must have been a static accumulation in the memory slot. Barrette memory system is under the keyboard.