NB200-110 won't start or allow the configuration of the BIOS

Similar Questions

• Satellite L30 PSL33E won't start at all - the LED blinks 6 times

  Hello

  My poor mother is quite upset! Its Satellite L30 PSL33E just died.

  It completely off and now won't start at all.
  Orange light flashes six times when you press the power button.
  No hard drive, fan, screen or any other noise / activity.

  She tried without the battery.

  A kind of hardware failure, I guess.

  Any ideas what this blink code means?

  Thanks in advance,
  D.

  I put t know what the code means, but you can read it. short means 0 and 1 long

  In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
  Why?

  because what is really hard to fix a motherboard for laptop very s.
  It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

  I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(

• U410 won't start - stuck in the Windows loading screen?

  Hi, I have a U410 that no longer starts. Don't know what he did stop. At startup, it loads the startup Lenovo screen, then the loading screen Windows 10 forever (balls chasing each other in a circle). I can't get combinations of keys F bring me to the BIOS. I tried to use the Novo, but not the work of options other than the restoration of the system. They all display the startup Lenovo screen, then the Windows 10 loading screen.

  I created a bootable USB floppy and USB boot, but I never have an option to get the BIOS or choose another Boot device.

  Thanks for the answer, it turns out that it was the hard drive.

  There's something corrupt on it and it wouldn't start. I took and connected to another machine, but he was not recognized by the BIOS or Windows. I returned to the U410 and starts in with the Novo button restore mode. Curiously, it worked and I was able to restore the machine back to original settings and then upgrade to Windwos 10. I lost all data on the HARD drive, but it's normal. She has been saved and most of the records is anyway in the cloud.

  Not trusing stability of this HARD drive, I decided to replace it with a Samsung SSD. It was a great experince. Samsung provides a disk copy utility that works on the HARD drive running! A took about 45 minutes to reflect the existing for the connected SSD HDD. After that, I have swapped drives, ran the optimization of SSD and it was good to go.

  The special tools required for this were opening and pry tools and an USB HARD drive adapter. There are many videos on YouTube that show how to open the laptop.

• Computer laptop 15-p047na: laptop won't start up after the Win 8.1 update

  I bought this laptop on 16 December and got with the transfer of files and my old desktop PC applications.  Everything is OK until last Sunday, when I left the laptop is a Win the day update 8.1 overnight.  The next day, he asks for a restart, but then, after initial HP logo, the screen turns white for a few minutes.  Then the Win 8 screen with a message: "LogonUI.exe - Application error.  The instruction at 0x00b1645a referenced memory at 0x00000008. The memory could not write. »

  When I click OK, the screen turns off then flashes.  The message appears again, with the same result.  I tried to start the computer from a CD and a USB key, after changing the boot sequence in the screen of the BIOS/UEFI, but with the same result.  What should I do?  Help welcome!

  Hi @agniculus ,

  Welcome to the HP Forums!

  It's a place dynamite to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that after a Windows 8.1 update, that your system does not start properly.

  First of all have you tried a hard reset?

  Here is do a Hard Reset or forced to reset.

  Here is a link to the computer does not (Windows 8) which can also help.

  You can also try of using Microsoft System Restore (Windows 8) back to the front, what happened.

  You can start safe mode?   Safe mode of Windows 8

  Safe mode, you should be able to run the troubleshooter and do the restore.

  Good luck!

• Windows vista completely crushed hard drive won't start after installing the packs of services and internet explorer 9

  Thought I did my brother a favor so that he was at work and installed service Pack 1 & 2 on its 32-bit vista operating system, and then installed internet explorer 9 and it crashed the entire operating system nothing work, hard drive, monitor, mouse nothing. I hope this isn't a hardware problem which needs the advice of experts, the guilty feeling like I had left him only someone help with this can not start even to the bone g .thanks

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• PC won't start after setting the default settings in the bios of the a10

  I installed the new bios a10 in order to try to get my new gtx 970 graphics card works, after that the card has not been recognized so after a little research I tried a solution by setting the default BIOS settings. I did this but now whenever I start it says that there was a problem and has the:(face et redémarre en un continue le cycle.) I then put the previous gtx 750 working back in and the problem persists while I can't all my dell xps 8700. Did someone knows how to fix the problem starting and also nobody knows why it was not recognizing my new graphics in the first place. Any help is greatly appreciated thank you.

  Probably the SATA Configuration has lack of AHCI. If your configuration is a small SSD cache drive, then you will need to change to Intel Smart Response Technology:

  http://dellwindowsreinstallationguide.com/ensure-you-have-the-correct-SATA-configuration-in-the-BIOS-Setup-for-your-configuration/SATA-operation/

• Satellite M30-110 won't start

  When I turn on my laptop it gets in what for the display of the past and Toshiba page then on a black page with a '_' blinking in the upper left corner. I was told that my hard drive has failed - is this the case?

  I have the cover with Endsleigh. They would cover something like that? I do not know the procedure with fixing - what happens?

  Either the BIOS does not find the HARD disk because it? corrupt s or on the HARD drive boot sector is too bad and the operating system cannot be loaded.
  I think you should try to boot from the recovery CD. If the installation of the OS was successful then the HARD drive is OK and the laptop should boot correctly.

  But if the installation is not possible, that the HARD drive is bad.

• Laptop computer DV6174ea not start after upgrading the bios!

  HP dv6174ea lapop - Win XP media center edition with sp3 - processor intel core duo - 2 GB ram - 120 GB hd

  Ive just used the upgrade of bios of HP downloads flash to upgrade the Phoenix bios on my dv6174ea to version 2.9 1.06.Flashed successfully but on reboot it reaches windows XP start screen (black with logo) fails then a blue screen and restarts quickly. Same cycle occurs again and again. Ive tried to boot from the XP cd, but it gives the message "no hard drive not detected" and fails. detect the drives in the BIOS there is no options to the automobile.

  Curiously, a USB bbot containing paragon hard disk manager won't start and sees my drive (two partitions) and the system partition is active.

  I wonder if the flashing the BIOS changed settings or drive letters so that windows does not see properly. I wish there was just a simple option in the bios for detection of discs.

  Can someone pls help.

  If you want to start your computer from the xp cd, then enter the bios and it try to disable the sata mode and activate the ide mode and then try to format your drive... it should work... !!!

• Black screen, high regular of underscore on the left does not start after reflashing the BIOS F.38 on HP2000-363NR

  HP2000 363NR, recently tried flashing the BIOS F.38 (here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116227-1&cc=us&dlc=&lc=en&o... ) to solve a problem of overheating.

  Well, it was a mistake.

  Now it does not start at all.

  Fans spinning upwards. Hard disk rotates.

  By pressing ESC, F1, F2, F9, F10 and F11 at startup to give appropriate (fast!) messages but then go to the same place:

  Black screen with flashing underscore in the top left. Leave it to this screen has no effect.

  Never see no text except the quick messages in the lower left (or "Press the ESC key for the system menu" down left based on nothing).

  Out and the relocation of memory does not work. Boot with a DIMM module does not work. Now hold power for one minute while the battery and plug on does not work.

  Battery is fully charged.

  OS is Windows 7 64 bit Home Premium, came with the laptop.

  Is it possible to return this BIOS?

  -Me

  Thanks to Xraytim in the post below, short-circuit the battery CMOS me returned to the previous BIOS. Need to remove card system as a whole to achieve this * beep * connector, but 34 screws later (34 = some # between 15 and 50), BIOS is back, problem solved.

  Thanks for the forum!

  -Tim

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/DV9858ca-won-t-boot-after-BIOS-update-won-t-power-with-AC/TD-p/555547

• HELP... z400 will not start after changing the BIOS settings

  Hello

  I went into the BIOS and changed all the PCI slots to include 'calculate' so now it does not recognize video card, now it does not start far from enter the BIOS to undo changes. Ive pulled the battery, reset the CMOS button and jumped the pins CMOS won't default. To b e there is a way to fix it... Please any ideas will be appreciated.

  Hi Glenn,.

  Thanks for posting your query in Microsoft Community.

  Important: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I recommend you contact the manufacturer of the PC for the procedure for making changes in the BIOS.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Satellite U940 - cannot start or access the BIOS settings

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Posted by devondan
  

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Is it possible to disable hybrid sleep physically? Remove the CMOS battery? Replace the memory? I can't do it from the software or access the BIOS and I wonder if it is what keeps a clean boot.

• Qosmio DX1210 starts plus-mise the Bios updated has no

  Hello

  I tried to do an update of the BIOS on my DX1210 last night to version 1.5.
  There is a write failure error message during the update and now the system does not start.
  Is it possible to reflash the bios when a bios update fails?
  I have all the files extracted on one but key USB bios I don't know what to do to initiate a bios recovery?

  Well, the BIOS problems can be solved only by a Toshiba authorized service partner.
  I guess the ROM module where the BIOS is stored, not properly was flashed.
  The Rom module can be flashed again using a disc special crisis.

  So I don't see a real option for you: get in touch with the guy from service for repair.

• Satellite Pro L300-1FN does not start - hang at the BIOS splash screen

  My Satellite Pro L300-1FN refuses to start. When turned on the laptop displays the home screen toshiba/insyde H20 BIOS and the message "press F2 go to the Setup utility, F12 to go to the start menu" and flashes the light access to the hard drive, but don't try to continue loading. I left the bios at the start screen, but it doesn't do anything for long hours on a power supply or is running the battery flat while on battery.

  Is there a way to re - put the BIOS on this unit? If it's a desktop unit I would remove the CMOS battery to force a reset of the BIOS but that's impossible on a laptop. The hard drive is fine because I have it plugged into another system to remove valuable data.

  Hello

  What happens if you press F2 when starting the laptop to the top?
  You can access the BIOS?
  If so, access the BIOS and set its default value. I think you need to press F9 or F10 to get default parameters, but this will be mentioned at the bottom of the page of the BIOS.

  Check it!

• How to start IrDA by the BIOS on my Qosmio F10?

  Hello

  I have a Qosmio F10, and I read that the port IrDA does not start by the bios at startup, but by the operating system.
  How can I do to start my IrDA port with the bios at startup? Is this possible? Cause that will help you a lot

  Another question, yesterday I've post a message on the Linux driver. When I ve clicked on "post message" I ve got a message "this message must be approved by a moderator" but, I do not see my forum topic, but why yesterday, my topic was to be accepted by a moderator and today my topic doesn't have it?

  Post edited by: benlog

  Hello

  It is not possible to make some changes on the IRDA port in the BIOS. If the IRDA port is available on the machine, the operating system can recognize automatically. As far as I know that the infrared port is always enabled for communication with the other device that has obtained permit port IRDA.

  Good bye

• Laptop not start after upgrading the BIOS crash

  Hi all

  I just want to ask if there a chance to reactivate my Satellite A300 after crash BISO update without it sends to the service of Toshiba.

  I downloaded the new BISO and he started in the Windows menu. After a few seconds my PC crashed and everything was frozen.
  I turned off the PC.
  Now, when I press the power button to boot up the laptop, the screen is black and I can a sound BRR, BRR, BRR of the CD-Rom drive.

  Don't you think that it is possible to boot from a CD or something like that. Is it possible to reactivate my phone?

  Your help would be really appreciated!

  Thank you very much

  Best regards

  Chotte

  Sorry but if the BIOS chip is damaged there is not a lot, you can do about it. You must contact the Toshiba authorized service provider.