T43 won't start. Only the fan is running. Empty the screen any ideas?

Similar Questions

• Computer won't start and the screen is weird looking

  After the maid left today, I noticed my computer screen on my DELL PC running Windows XP HOME Edition (service pack 2 or 3 - I don't know) seemed strange. The pixels have been weird in several areas of the screen and the cursor froze.  I tried to turn off the computer, but it will turn off, then I disconnected and finally had to hold the power switch on the CPU for a few seconds to turn it off.  When I tried to turn it back on again, it showed Windows startup to the top of page - but the screen still seemed weird - kind of out of touch.  The computer does not start.  It's just a black screen with a cursor in the middle of the screen is frozen and the mouse does not move.  I tried to push the F-8 when starting Windows screen came. He took me to a different boot options menu, but always with the print-screen out of phase. I tried a few startup options, but it just brought me back to the Windows boot screen with the logo being shifted - sort of split and strange looking.  Is it possible that my maid has done something to the computer, wiping down? Is it possible to fix this? It's never happened before. Can someone PLEASE?  Thank you

  Hi Goldie309,

  I suggest that you reset the default monitor settings using the buttons available on the computer screen and check if that helps.

  You can also connect another monitor to the computer to check if the monitor is defective.

• Satellite L350-170 - won't start, only the BSOD

  Laptop of my son froze the other night and he had to turn off manually. He started upward once again some time later and this message appears on a BLUE SCREEN.

  * A problem has been detected and Windows has shut down to avoid damaging your computer

  * If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: *.

  * Make sure any new hardware or software is properly installed
  * If this is a new installation, ask the manufacturer of your hardware or software for the windows updates if you need.*

  * If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading. If you need to use safe Mote to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.*

  * Technical information: *.

  * STOP: 0 X 00008086 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000) *.

  We have tried to start in safe MODE but nothing seems to work and I was wondering if someone could help?

  Thank you very much

  Dave

  Hello

  If SafeMode doesn't work too, the problem seems to be related material or your Windows installation is damaged. You have something has changed or installed on the laptop? If this isn't the case, I would test the RAM modules with special diagnostics, like Memtest86 tools. Use Google to find (freeware software).

  If Memtest86 can t find mistakes, I would try reinstalling Windows using Toshiba recovery disc.

• Yoga: S1 ThinkPad won't start, only the light flashes three times.

  So I just bought a refurbished Thinkpad Yoga and everything was great for a little while. So I decided to stop it and put it aside for a few minutes. After coming back, he now refuses to even POST. I tried each power cycle I could think of, in various combinations and traveled several forums. At the end of the day, I have no functional solution.

  Current situation:

  System responds in any way other that 'i' (in the Thinkpad logo) light flashes three times when the charger is connected, or even when you press the reset button while the charger is plugged. Another illicits nothing any kind of beep, light, or otherwise.

  Any help is greatly appreciated. Thank you and best regards.

  I have the feeling that you had opened the back cover of tinkering with components (whether a change of SSD or the modem 3g / 4g).

  the symptoms you described sounds exactly like a cut cable MB. You can try opening the hood back and on the left side, you will see a wire labeled "MB". tighten, and the computer should fit now.

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• Satellite A300 starts but the screen is blank

  My laptop Satellite A300 broke down after opening a zip file, I think it was called flash microsoft.

  The laptop starts but the screen is blank.

  Any ideas?

  You see anything on the screen when you start button / stop?
  See Toshiba welcome screen?

• I would like to restore my passwords saved (only the passwords, any profile) to my laptop. Available, I have only a back-up of my previous drive C:

  I would like to restore my passwords saved (only the passwords, any profile) to my laptop. Available, I have only a backup of my previous C: drive.

  Claudia,
  You must do the following:

  • Locate the backup of your previous profile. See https://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile - you will need to manually adjust the location of your backup, and shortcuts like %APPDATA%\microsoft\windows\sendto do not work (on Vista/7, %APPDATA%\microsoft\windows\sendto is defined as \AppData\Roaming C:\Users\username)
  • Locate your new profile. See above, but here you can use the help-> troubleshooting information button
  • Copy the following files from the old profile to the new profile with Firefox closed: signons3.txt, signons.sqlite

  See https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile#Your_important_data_and_their_files

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• KERNELBASE.dll blocking SKYPE. Started after critical W7 updated 19/11/2011. Any ideas?

  KERNELBASE.dll blocking SKYPE.  Started after critical W7 updated 19/11/2011.  Any ideas?

  Hi MarkSchoenbaum,

  Please see the following thread similar with a possible fix:

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/c5eb79c4-839f-43D5-804A-9bbdff4f1dc6

  I hope this helps!

• On dell 924, but paper jam no paper in the printer any ideas

  I have a dell 924 printer that when I turn on the jamming paper rises, but there is no paper does get stuck in the printer any ideas

  Hello

  Try the information below

  If that fixed it, try to Support from Dell

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  ·                         ________________________________________________________________

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  ·                         ________________________________________________________________

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• T43 won't start, it must remove the battery and try again.

  T43

  2686 E7U

  My computer frequently not turn on, I have to take to HQ and main and ultrabay batteries, sit around for a while and try again and again. It never fails to start the computer in the end, but I'm also afraid someday that simply, it won't start. Currently, I decided to not turn off my computer, I just pause and restart from time to time. Stability wise it is solid, but I would like to address this issue before the end of my warranty and I don't want to be without my computer for a long time. This has been a recurring problem for much of this year.

  I don't have a working windows partition, I run ubuntu, so I wouldn't have enough to mess with resettlement of the bios unless it can really solve my problem. Information about the current bios

  1.29 BIOS version (1YET65WW) 21/08/2006

  Embedded controller 1.06

  The typical sequence looks like this.

  Computer is turned off and unplugged after a normal shutdown.

  I plug in the power adapter to the computer, and after a few seconds the Green battery light.

  I press the power button, the computer does not put away and the light / energy from the battery stop.

  The light on the battery even when I release the power button remains off.

  Next step is to remove the AC and my two batteries, wait awhile, plug it back and and cross my fingers. If does not turn on, go to step 1 and repeat.

  I sent it to lenovo and they replaced the motherboard, and which until now has seemed to solve the problem.  even got a new keyboard out of it, even if the keyboard is a little more clicky then old.

  called Sunday, got a box Monday, droped out of the box of DHL Tuesday, got my computer back on Friday.  pretty good, considering that he was sent to tennessee.

• 2011 21 inch iMac won't start after the SSD upgrade

  Recently, I upgraded my hard drive for an SSD via a computer repair business in my neighborhood, I also upgraded the ram, but I don't think it's in the case. On a two weeks after the upgrade, my computer don't turn on more. I took it to the genius bar and they told me that the DSS had "failed." So of course, I took my computer to the computer repair company and they ran some tests, discovered that the hard disk does not (according to them, he only read this way because the apple store has run the test for a normal hard drive and not an SSD). I'm not super computer savvy, so I took their word for it.

  Now, however, it has been nearly a month and my computer refuses to activate once again. Previously, it has worked well, the fans were running at full blast - what I knew would be a problem (although the repairman told me that they 'fixed' this issue too). So the first time, I downloaded a program called SSD fan control and set the fans to run in silent mode. This second time around, I realized that it was probably a bad idea because it could lead to overheating, so I put manually the fan speed so that we could hear still run, but just not as loud.

  I tried the reset SMC, but no result. Right now, I unplugged everything including disconnect it from the power strip.

  Any other experience of power with a new SSD failure? Is there anything else I could try at home before contacting the computer again repair business? I would not be able to reach at least until tomorrow, and I'm really curious to know how they managed to get my computer back on the first time.

  Also, I've been out of my warranty period for about a year, so that's why I thought that I was not risking too much by exchanging the original for one SSD drive.

  First of all, the original in Middle 2011 iMac hard drive had a temperature sensor integrated in the drive.  More new or replacement of those who do not.

  Other World Computing sells an Apple certified temperature sensor that plugs into the SATA cable.

  https://eShop.MacSales.com/item/OWC/DIDIMACHDD11/

  I just put a 2 GB Western Digital Black in mine, with the sensor.

  I suggest all first, reinstall the OEM disc and see if it boots.

  Put the SSD in an external enclosure and see if it runs...

• Vista won't start after the last update of Silverlight - restarts constantly

  I installed the latest version of Silverlight from Microsoft Update, July 21.  There are 2 updates, but the other would not move.  My computer worked nomally and later when I stopped it, I got the "Configuring updates... do not turn off your computer" message.  It seemed to take a while, so I went to bed and the next morning, I saw that the computer had finally stopped.  I started it and I got the message "configuration updates stage 3 of 3." 0% complete.  Do not turn off your computer. "After anywhere from 10 seconds to a few minutes, it restarts.  She's constantly - he keeps just reboot and it displays the updates configuration message.  In the System Recovery Options, Startup Repair indicates that everything is OK.  "System Restore" to go to the restore point previous does not work.  What can I do?  The only other option and restore utility is all erase and install the drive from the factory.

  I have Windows Vista, the latest service pack and updates.  I have F-Secure anti virus/firewall.

  He has also failed to the previous Microsoft Update a week or 2 but it gave an error code of that time.  I looked at the error to Microsoft code and it says that the update log was full and there was a command to enter to remedy.  I did that and installed the update and everything was fine.  Unfortuately I have more error code or order more.

  Perhaps related to this problem?  My computer is pretty much dead now after Silverlight updated because it constantly restarts.

  Don't boot from the XP CD.

  Do an ERD of VistaBootable of the info below:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• Why my computer won't start with the DDR RAM?

  eMachines T5026 Memory Specifications Standard memory 512 MB (removable) Maximum memory 4. 0 GB Memory expansion 4 Sockets Memory comments PC2700 DDR SDRAM DIMM. Supports Dual Channel DDR. Type of processor Processor Intel Pentium 4 519 3.06GHz Model comments Bus 533 MHz, Intel 915GV Chipset front

  Upgrade memory for eMachines eMachines T5026 computer, eMachines eMachines T5026 computer takes the PC2700 DDR SDRAM DIMM. Supports Dual Channel DDR. Type of memory and is installed with 512 MB (removable) of memory. You can upgrade your eMachines computer eMachines T5026 for up to 4.0 GB memory, the system has 4 sockets to install memory, already with 512 MB (removable) standard memory installed. For best performance of the computer, use the maximum amount of memory allowed per slot for your computer. Choose the following memory Upgrade for eMachines computer eMachines T5026.

   

  I am running Windows XP SP3 with RAM sticks of 256 MB (2) on an old eMachines T5026 desk top.  I added strips of RAM 1.0 GB (2) for the two slots open and computer would not start.  I tried with stick (1) 1 G and (2) 1 sticks and it still won't start.  I tried to mix and match the 256 with 1 G in each combimation, but it does not start.  Won't start with one or two sticks of 256.  Best Buy had PC3200 DDR RAM but the spec above States use PC2700.  Geek Squad says that PC3200 is OK instead of PC2700.  Is this the problem or I had to do something besides just insert new RAM?   Suggestions welcome.  Thank you.

  Thank you for confirming that. I still think that the above tips are relevant:

  Because what you bought doesn't work, my suggestion is to stay within the plug (PC2700), like this:

  http://www.crucial.com/store/listparts.aspx?model=T5026&cat=RAM