Slate by default in the camera to start

Similar Questions

• Satellite P200-1EE - cannot get the camera to start

  After plunging through the forums, I noticed a lot of people have had problems with their bed with web cameras.

  Before that the camera was just in a bad mood, for turning on and off indicating other applications had locked its use (when they n even on t, not even in the background), but it has stopped working.

  I managed to uninstall the camera driver and download the version of Vista to the Web site. The software seems to have installed fine, but when you start the program it says "activate camera" and even by pressing the shortcut keys, I can't the camera to begin with, just the software with a gray screen.
  I checked Device Manager and not its use.

  Help please! I don t want to have to go out and buy a new camera.

  Hello!

  I have two Toshiba laptops and no problem with the webcam. The two webcams work fine and without problems.

  Have you downloaded the driver from the Toshiba site?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Perhaps a BIOS might also solve the problem.

  Did you install the laptop with the Toshiba recovery disc or disc of Microsoft?

  Good bye

• How default to the modern UI start on login screen?

  I recently bought a laptop from a friend who had set up her laptop so that as soon as the connection, the computer will bring him immediately on the classic desktop theme. I want to turn the tide, so that, from the connection, I am immediately brought to the screen start mosaic. Thank you very much for your help!

  Nevermind, I found it.

  Thank you!

• Elite X 3: X 3 start the camera

  Hello. Is there a a way to open the unit without connecting it to the lock screen?
  
  Is there a button on the camera, which acts as a shutter button?

  Hello Kar1o,

  No, I mean the menu down. It should contain camera, sign of Windows, search.

  If you tap the camera symbol then it vibrates and after a second or two it starts to vibrate again. then release the button and the camera will start without authentication.

  Sorry for my confusing tip.

  Concerning

  JoeTec

• Start the camera in manual mode?

  If you can make the camera to start immediately in manual mode?

  Issue edited by Rickard

  It is not possible when you use the camera button, but if you type "Camera" in the app drawer or he will go to manual if that's what you used the last time the home screen.

• How to exit the camera application properly

  I start the camera application by doing this

  Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());

  The camera app starts. I take a picture.

  I am on a 9000 "BOLD".

  You use the camera you will find that you can not close the app until you get rid of the image sets that you have just taken.

  For example
  take photo

  Picture is a static view of the screen

  If you press close (close menu) it does ' t go away.

  If you press the ESC key, then press close he disappears.

  now in my application, I need to simulate this but I can't seem to get out

  I want to launch the application.

  Press the trackball to take the picture

  Save the photo.

  Then exit.

  I inject

  EventInjector.invokeEvent (new EventInjector.KeyEvent (EventInjector.KeyEvent.KEY_DOWN, Characters.ESCAPE, 10));

  EventInjector.invokeEvent (new EventInjector.KeyEvent (EventInjector.KeyEvent.KEY_UP, Characters.ESCAPE, 30));

  And it closes ok

  BUT... when I opened the camera (for the second time) the image is on the screen, the last shot.

  So, it didn't really come out. The user must press the ESC key stupid and then take another picture.

  Any ideas?

  Thank you

  You test this in the simulator of BlackBerry or on a real BlackBerry "BOLD"?  What version of BlackBerry device software you are using (beneath Options, about)?  Is that you inject events for all the actions in your list or just the ESC key to exit?

• I connect my Canon camera, wiaacngr.exe opens a window asking me to select the program to start. But it offers only two options: M/S Office Word and scanner and camera wizard.

  original title:wiaacmgr.exe

  I found a lot on the Internet about wiaacngr.exe not opening not or refuses to recognize the camera.  My problem is almost the opposite!   Whenever I connect my Canon camera, by USB, my current laptop (Windows XP Pro SP3 of v5), wiaacngr.exe opens a window asking me to select the program to start.  But it offers only two options: M/S Office Word and scanner and camera assistant, neither of which I want to use.  If I close the window...  Not much, but it's a nuisance.  I would be happy if she has proposed to launch work stations.  I then click on the box "Make this every time" and will never see the window.  Otherwise, I'd be happy to remove the program completely.  Can someone tell me how to achieve one of these?  S ' Please!
  Jim

  Hello

  I suggest you to return the item and check if it helps:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  See also:

  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

• Always necessary to reset the default boot to Windows 7 start menu

  HP P6632f 64-bit computer

  OS Windows 7 Home Premium version

  Error messages that have been found are

  An unknown error during system restore 0 x 80070002 (used a different restore point and it worked)

  BIOHD 4 error code (this appeared on two occasions however, the computer starts with F4 in the start menu)

  There were no additions to the computer for several months, however there was a power outage that shut down computer just before it started.

  When the computer starts up goes to the first blue screen when you can press Esc for boot menu, F9 for diagnosis, etc..  The boot then fails and requires a boot disk.

  To fix this problem, I used the repair disc and or F8 to access different repair options.  I used the Startup Repair, System Restore, as well as the bootrec /fixboot and bootrec /fixmbr commands.  They have worked to get the computer to start, however, when it came to a reboot I was at square one.  When you use the Startup Repair disk and HD, there would be a report that there are no startup issues or questions start had been repaired but sometimes it would start and sometimes it wouldn't.

  If the safe is a restart then most of the time it will restart correctly.  However if the computer is stopped for more than a minute it will not start.

  I now start the computer by using the ESC key at startup to the top and enter the boot menu. I then use the F4 key to reset the default start menu and the PC starts and works well. The start menu lists first, second HD DVD and the Real tek DXEB03 D00 as third. (Don't know what this is.)

  Any helps resolve this, so I don't have to reset the default start at each start menu would be appreciated.

  It is unlikely that a HP Recovery or repair of Windows will last if the hard drive has failed. If you buy a new hard drive, you can order a series of HP's HP recovery disks or a third party provider of third party. If please see "Software media and command pilot" page or contact HP Customer Support. to order a set of HP recovery disks. You can also buy the ComputerSurgeons.com recovery discs if you prefer.

  If you don't mind lose the use of all the factory installed HP softtware 'value-added', please visit "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer.

  Please click the White Star of KUDOS to show your appreciation

• The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  If the above did not help, then also see the following articles for more suggestions:

  • https://support.Mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • http://KB.mozillazine.org/Preferences_not_saved

• Satellite A200-08JC - software of the camera Chicony does not start

  I installed the correct drivers for my 08JC satellite A200 XP, but when I click the button start to run the software, it shows something loading for a few seconds, then stops. The camera does not illuminate and the display software that shows the view of the camera does not start: nothing happens.

  I searched around on Google for a solution, but other users having similar problems to the least get an error message to help. I have nothing like that.

  Does anyone have ideas that could help?

  And what dodey now?
  Driver installation doesn t help, you don't want to test the functionality of device with the settings you would expect now?
  A magical solution or what?

  Description of your model name is somewhat strange and A200-08JC is not known to me but overall Satellite A200 notebooks are WXP supported.
  Can you please post the model name for laptop again?

• Re: Could not start the camera on Satellite P300

  I have a Satellite P300 and I use Windows Vista. In recent weeks one have a problem starting the camera. I always get the message

  CEC_Main.exe does not work

  I need help.

  Thank you

  Have you tried to reinstall the webcam software?
  Latest version, you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp-

• Satellite A200 - once installation of Karspersky cannot start the CAM software

  Guys I need help...

  I have download the Karspersky antivirus 2009 and I install on my Toshiba Satellite A200-gs1 psaece
  He acknowledged the cec_main.exe as virus and block...
  I put it in the exclusion list, it does not continue the works, and when I started my laptop it said «cannot run cec_main.exe...» ».

  I remove the program and install it again I ve put again to the exclusion list.
  Now it's the turn of say on your camera when I m running my cam program.
  I put t know what I should do...

  Here is the cure:
  Probably a good idea to go to Toshiba and download the latest version of the software for the camera to your computer. Do not open this software. Go to the control panel and remove the existing camera Assistant software. Open the Kaspersky software and click settings then click threats and exclusions under the Options tab. Click on the zone of confidence. Click on approved Applications. If CEC_MAIN.exe exists, delete it. Restart the computer.
  May be a good idea to delete your internet cable because we do a right-click on the Kaspersky shortcut and click PROTECTION of PAUSE. This is a must! Probably best to set for a 10 minute break. Close this menu and then open Kaspersky. Go to settings > threats and Exclusions > Trusted Zones > objects > Add + > and type in manually or copy and paste the following text exactly as shown below:

  C:\Program Camera Assistant Software for Toshiba\CEC_MAIN.exe

  exclusionary rules, to allow CEC_Main.exe to be a trusted application. Then reinstall the software assistant camera. Kaspersky should always be in pause mode, but will let you know maybe CEC_MAIN.exe to contain a virus.
  Ignore, but look for the option on this same screen that will allow you to add this as a trusted application. It's the key to this... Kaspersky should be paused during the reinstallation of the software. Once you tell Kaspersky to add this as a trusted application, your installation should be completed. REBOOT and the problem is over.

• Satellite Pro A300-1E7 - cannot start the cam software

  I bought the Satellite Pro A300-1E7.
  Webcam does not work in MSN messenger video call.
  Will have problems similar to the previous posting, except that I use Zonealarm.

  I think that Zonealarm has disputed cec_main.exe in a similar way.
  I tried to follow the instructions here, but without much success.
  I removed the Camera Assistant SOftware and re-installed the driver but does not seem to have improved things.
  Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.

  Any ideas please?

  Hello

  I used the Zonealarm happened and I was not really satisfied, because this software locked everything and most of the applications didn't work properly even after the new configuration! Finally, I removed this software and I noticed more advantage. my laptop starts much faster!
  I think this software would lock the cam software too.

  > Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.
  This means that the software has been removed and is not installed correctly.
  But to be sure, check in Control Panel-> Software (Add & Remove Programs) if the webcam is installed.

  I have the internal cam of Chicony too and it s works well as part of the software Skype. I didn't test t MSN but I don t see serious reasons why it shouldn't t work.

  In my view, you must first remove the zonealarm. Then clean the OS using CCleaner. Finally, redownload the webcam software and reinstall it!

  The toolbar of the webcam is not always visible on the desktop.
  It seems that if you move it the mouse cursor to the place where the webcam tool bar was hidden.

• Location of the camera of the A1-810 by default for microSD Iconia

  Hello community,

  For some reason any when adding to a microSD to an Acer Iconia A1 - 810 Tablet images from the camera are not stored directly on the map.

  After inserting a microSD on other Android devices, I get a message asking me to change the default location of the store.

  This is not the case with the A1-810. I checked the Android version, but did not find any setting where I can change this. Normally, it should be within the parameters of the camera application, but there is no framework also... A reset has been made but still no luck.

  No idea if it's somehow possible, and how we can accomplish this?

  Thank you.

  Wouter

  JD systems

  We were convinced that it was somehow possible... looks that our representative of Acer has misinformed us during the presentation of this tablet. Too bad.

  In any case, thanks IronFly for this. Looks like RTFM WINS yet ;-)

• Windows will not start since the attempt to install the camera software?

  Hello, I tried to install the camera software, when I did it said my computer to shut off and re satart to complete the installation, when I did a blue screen came up saying that windows had been shut down to protect my computer (not this one). He says to re start computer I did who bought the safe mode/start windows normally screen etc, but nothing's going to restart windows, it starts at, then returns to the blue screen again. Can anyone help please?  Thank you. Trevor

  Hello

  ·         What software have you tried to install on the system and what is the name of the program and where you installed it go?

  ·         What is the exact error message that you meet in the blue screen?

  ·         You're able to boot in safe mode?

  Method 1:

  Step 1:

  I suggest you try and boot into safe mode. Follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  Do a restore system, safe mode and check. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084/en-us

  Method 2:

  I suggest you to try and initiate the last known good configuration. Follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select last known good configuration and press ENTER.

   

  Method 3:

  I suggest to do a restore of the system from the recovery console and check if you are able to boot to the desktop without any problem. Follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545