Sleep function does not

Similar Questions

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Windows 7 auto sleep function does not

  I put the sleep on the night feature on my desk and the next morning, when I go to use, the computer is turned on.   How can I make the computer sleep?

  Original title: Windows 7 using the Sleep function.

  Hello James,.

  Thanks for posting your query in Microsoft Community.

  1. What have been the recent changes made on the computer prior to the question?
  2. If it works much earlier?

  This problem may occur as a result of changes in power settings.

  You can try the following methods and check if this is useful:

  Method 1: I suggest you to perform troubleshooting of power utility to set the power of your computer settings and check if it works properly.
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Additional information:

  Sleep and extended: frequently asked questions See(why doesn't my computer go to standby or hibernate as expected, or why it suddenly wake? )
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• SLEEP function does NOT work!

  Hi, all of a sudden my sleep buttons do not work!  When I click on 'Sleep', the monitor stops and the PC begins to close down, but then reason that the PC (and monitor) will be provided in works immediately...  Someone has an idea?  :)

  Thank you
  Mark

  Hello

  If sleep used to work, you can try a system restore to when it worked. The cause could be
  an update of Windows - especially a update driver then check Control Panel - Windows updates - if you need to
  Remove on look in the lower left - installed updates and uninstall - then you can right click on an update
  and so it will not install to HIDE it. Following the publication of the update could solve your problem and have probablt is the
  best way to take 1st.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  Question
  I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  edit, escaped mod < s > in order to avoid the line through question

  A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

  ALT + SHIFT + S

  and see if it works.

  I don't know of any way to change this so that the change is not necessary. There may be an add-on?

• curve adjustment function does not work

  Hi all

  I am trying to bend fitting, a graphic. but the curve adjustment function does not work. I get no output curve.

  which suggests to me u.

  Thank you

  You have been asked to view the code. We cannot solve the photos.

  Matrices X and Y are same length? Is a NaN value? What the output error say you?

  (Also note that in this case, it would be convenient if we don't need to wire x take a look at this idea!)

  This discussion is useless until you attach a real VI and data, so please.

• OfficeJet Pro 8620: Sleep mode does not

  "Sleep" mode does not work on my new settlement 8620. I tried to change the duration of sleep from 5 min. to 10 and 15, but he was not asleep yet. I tried to close and restart the unit, but that did not help. 2 times the unit did go to sleep, but then he woke up after a short time.  Any suggestions?

  Hello

  Fitrst ensure that the printer has the latest firmware:

  http://support.HP.com/us-en/document/c04083718

  More don't forget to connect its completely directly to a wall outlet and not by some power strips, surge protectors, etc.

  If the same results persists, try temporary disconnect a cable from the back of the printer in order to isolate any possible cause (e.g. fax, USB cable, etc.), remove one cable at a time and to check for the difference.

  I suggest starting with telephone wires, telephone line condition as example may prevent the printer from sleep remaining.

  Please let me know the results,

  Shlomi

• My gesture control function does not work correctly there on and off automatically

  My gesture control function does not work correctly there on and off automatically

  which application you are using? try reinstalling the media gallery.

• Backup function does not?

  Backup function does not. The program runs and ends with an error message, access is denied. (0x80070005). Looks like a backup has been completed. I tried another external hard drive as a destination and got the same result. Help!

  Hello

  · You are the administrator of the computer?

  Step 1: Make sure that you are connected to the computer as an administrator. If you are not then you will need administrator to help you in the backup.

  Step 2: Temporarily disable the antivirus and check if the problem persists. If no problem occurs, then you need to firewall settings in the security software.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

• AUTO PLAYBACK FUNCTION DOES NOT WORK

  AUTO PLAYBACK FUNCTION DOES NOT WORK WITH MY ADOBE PHOTOSHOP 7

  Try to uninstall and reinstall the program.  If this does not work, then I suggest that you contact adobe at http://www.adobe.com/support/photoshop/support.  This doesn't seem to be a Vista problem - it sounds like a problem with Adobe Photoshop. Lorien - a - MCSE/MCSA/network + / A +.

• The side-by-side function does not work correctly, windows overlap

  original title: sizing windows side-by-side

  The side-by-side function does not work correctly, windows overlap.  How do fix you this feature?

  Hello

  It is Aero Snap.  When you select a window how you "cutting" it in position?  You do not use the window key and the arrow left/right or are you drag / drop window?  If you drag / drop, using the keyboard shortcuts help to solve the problem?

  Kind regards
  Alex T.
  ~ 2007-2011 MVP Windows desktop experience ~

• Z30 blackBerry not able to sign in Blackberry Protect. Backup and restoration of function does not. "Your device is not associated with a Blackberry ID."

  Unable to sign in Blackberry Protect.  Backup and restoration of function does not. Message is: "your device is not associated a Blackberry ID."  My Blackberry Messenger and Blackberry World works well so I'm sure this isn't a problem of ID on the phone.  I can sign in link, Blackberry.com and Protect.  I see my device to protect, but can't send messages, or view it on a map.  Times out with cannot reach peripheral message.  BB Protect on device has a circle whirling next to the on/off switch.  Cannot turn off.

  I deleted the link and re-installed.

  I reset the phone to the default (factory) and signed in.

  OS level is 10.2.1.3062

  BB link is 1.2.3.56

  I managed to understand this. I had to remove the device from the Blackberry Protect site.  Protect.BlackBerry.com. I deleted my new and connected device with my Blackberry ID.  I don't know if the step of wiping was necessary because I have not tried my backup with the current configuration of the device after the deletion.  The restoration is underway for me!

• "sleep" mode does not work in my window 7?

  my "standby" does not work even if I click on sleep, it does not react and the word of sleep is different form the other Word

  Hello

  1. what was the last time computer worked well?

  2. did you of recent changes on the computer?

  3. you receive an error message?

  4. do you use screensavers?

  You can follow the suggestions mentioned below and check with the question.

  Windows 7 is not going to sleep:

  http://support.Microsoft.com/kb/976877

  I hope this helps!

• Right-click the folder or any other function does not work, and I don't have a sticky key...

  Right-click the folder or any other function does not work, and I don't have a sticky key...

  While I click right click in windows Explorer has stopped working... Help, please!
  

  A Virus Scan. Your PC can be infected. If you have not installed it, use MS Security Essentials if you have a genuine Version of Windows. It's free.

• Win7 64 bit freezes & arrow function does not work, do not click to navigate anywhere

  Win7 64 bit PC crashes & arrow function does not work, do not click to navigate anywhere, exceptionally after being on ~ 2 + hrs. I can only turn off by pressing the power switch for about 5 seconds.

  Hello

  You did changes to the computer before the show?
  
  Method 1
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:  If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  Also provide an observer event logs.
  Open event viewer
  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer