Slide stops on entry when it should play

Similar Questions

• Foxfire runs when "Pac Man" plays continuously. How to stop it?

  It started this morning for the first time. He plays when Foxfire is activated, not with IExplorer. Foxfire runs when "Pac Man" plays continuously. How to stop it?

  This has happened

  Each time Firefox opened

  NA

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 4.0; .NET CLR 2.0.50727; WWTClient2 .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  Removal of CoolPreviews 3.1 seems to have solved my problem.

• I use images fixed high resolution but when the vid play they blur. They look strong when I stop. ***?!

  I use images fixed high resolution but when the vid play they blur. They look strong when I stop. ***?!

  Never had this problem before or on iMovie.

  Try to set a better quality in the view drop-down list top right of the Viewer window.

• I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• 5 Lightroom for Mac crashes when I select play slide show

  The software crashes when I select 'Play' in slide show, why?

  Hi Butch07179198,

  You could try to remove the file/s Look. preferences for instructions here: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html

  If this does not help, try to delete the file .lrdata from your catalog folder and rebuild the previews.

  Hope that helps!

  ~ ~ Arpit

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• First Pro CC - Bad preview when I press 'play '.

  Hello

  I use the first Pro CC 9.2 and since the UPDATE I have a problem, when I do my video and when I press 'play' / 'space' video quality is very bad as 360 p 480 p/but when I had the break the image becomes beautiful in the original size (2560 * 1440 p) :/

  Photo in playback mode:

  

  Photo at the stop:

  

  I check the options but I don't see where I can fix this :/

  Any idea?

  Thank you

  the key under the monitor should have a menu for the playback quality and quality break.

• How stop the audio when I get out of the frame AS 3?

  Hello

  Could someone find out how to stop the audio when I get out of the AS 3 mounting frame? I had around 20 slides running in a swf file. Each slide has the distinct voice on attached to it. I added slides in a layer and voice in the next layer on the timeline.

  Ago next and previous buttons placed throughout this swf to navigate between slides. This is where the question arises. I can travel easily from 1 to 20 slides and even can return trip. But the voice does not stop as soon as I click on the previous or next buttons. It overlaps with the next or previous voice just above.

  I searched online and suggested its use as channel to bring voices on the slides to have a better control. But honestly I don't know how to do. Could someone help me in doing this? This problem can be very simple for others. As I am a beginner in Flash and Actionscript, it hurts.

  Carry me nicely, if this code seems to be bit annoying and even lenthy :-(

  Thanks in advance.

  Code:

  Forward_Button.addEventListener (MouseEvent.CLICK, forward);

  Previous_Button.addEventListener (MouseEvent.CLICK, prev);

  function forward(event:MouseEvent) {}

  if(this.currentFrame == This.totalFrames) {}

  Stop();

  }

  ElseIf (this.currentFrame > = 55 & & this.currentFrame < 201) {}

  gotoAndPlay (201);

  }

  ElseIf (this.currentFrame > = 201 & & this.currentFrame < 310) {}

  gotoAndPlay (310);

  }

  ElseIf (this.currentFrame > = 310 & & this.currentFrame < 430) {}

  gotoAndPlay (430);

  }

  ElseIf (this.currentFrame > = 430 & & this.currentFrame < 530) {}

  gotoAndPlay (530);

  }

  ElseIf (this.currentFrame > = 530 & & this.currentFrame < 640) {}

  gotoAndPlay (640);

  }

  ElseIf (this.currentFrame > = 640 & & this.currentFrame < 750) {}

  gotoAndPlay (750);

  }

  ElseIf (this.currentFrame > = 750 & & this.currentFrame < 860) {}

  gotoAndPlay (860);

  }

  ElseIf (this.currentFrame > = 860 & & this.currentFrame < 970) {}

  gotoAndPlay (970);

  }

  ElseIf (this.currentFrame > = 970 & & this.currentFrame < 1080) {}

  gotoAndPlay (1080);

  }

  ElseIf (this.currentFrame > = 1080 & & this.currentFrame < 1200) {}

  gotoAndPlay (1200);

  }

  ElseIf (this.currentFrame > = 1200 & & this.currentFrame < 1310) {}

  gotoAndPlay (1310);

  }

  ElseIf (this.currentFrame > = 1310 & & this.currentFrame < 1420) {}

  gotoAndPlay (1420);

  }

  ElseIf (this.currentFrame > = 1420 & & this.currentFrame < 1530) {}

  gotoAndPlay (1530);

  }

  ElseIf (this.currentFrame > = 1530 & & this.currentFrame < 1690) {}

  gotoAndPlay (1690);

  }

  ElseIf (this.currentFrame > = 1690 & & this.currentFrame < 1780) {}

  gotoAndPlay (1780);

  }

  ElseIf (this.currentFrame > = 1780 & & this.currentFrame < 1880) {}

  gotoAndPlay (1880);

  }

  ElseIf (this.currentFrame > = 1880 & & this.currentFrame < 2010) {}

  gotoAndPlay (2010);

  }

  ElseIf (this.currentFrame > = 2010 & & this.currentFrame < 2130) {}

  gotoAndPlay (2130);

  }

  }

  function prev(event:MouseEvent) {}

  If (this.currentFrame > = 201 & & this.currentFrame < 310) {}

  gotoAndPlay (55);

  }

  ElseIf (this.currentFrame > = 310 & & this.currentFrame < 430) {}

  gotoAndPlay (201);

  }

  ElseIf (this.currentFrame > = 430 & & this.currentFrame < 530) {}

  gotoAndPlay (310);

  }

  ElseIf (this.currentFrame > = 530 & & this.currentFrame < 640) {}

  gotoAndPlay (430);

  }

  ElseIf (this.currentFrame > = 640 & & this.currentFrame < 750) {}

  gotoAndPlay (530);

  }

  ElseIf (this.currentFrame > = 750 & & this.currentFrame < 860) {}

  gotoAndPlay (640);

  }

  ElseIf (this.currentFrame > = 860 & & this.currentFrame < 970) {}

  gotoAndPlay (750);

  }

  ElseIf (this.currentFrame > = 970 & & this.currentFrame < 1080) {}

  gotoAndPlay (860);

  }

  ElseIf (this.currentFrame > = 1080 & & this.currentFrame < 1200) {}

  gotoAndPlay (970);

  }

  ElseIf (this.currentFrame > = 1200 & & this.currentFrame < 1310) {}

  gotoAndPlay (1080);

  }

  ElseIf (this.currentFrame > = 1310 & & this.currentFrame < 1420) {}

  gotoAndPlay (1200);

  }

  ElseIf (this.currentFrame > = 1420 & & this.currentFrame < 1530) {}

  gotoAndPlay (1310);

  }

  ElseIf (this.currentFrame > = 1530 & & this.currentFrame < 1690) {}

  gotoAndPlay (1420);

  }

  ElseIf (this.currentFrame > = 1690 & & this.currentFrame < 1780) {}

  gotoAndPlay (1530);

  }

  ElseIf (this.currentFrame > = 1780 & & this.currentFrame < 1880) {}

  gotoAndPlay (1690);

  }

  ElseIf (this.currentFrame > = 1880 & & this.currentFrame < 2010) {}

  gotoAndPlay (1780);

  }

  ElseIf (this.currentFrame > = 2010 & & this.currentFrame < 2130) {}

  gotoAndPlay (1880);

  }

  }

  If your sound is directly on the timeline, then change to Stream will solve your problem, but you need to change every single audio clip.

  For example if VO #1 plays frame 1 to 100, you click anywhere in this layer (where you can see the audio waveform), go to properties and flow the Sync value. If VO #2 play frame of 101 to 200, you must click somewhere in there and do the same thing. Go to the properties, press the Sync drop-down list and change the event to Stream.

  This isn't a level property 'layer '. This is a property ONLY of audio current under your cursor is in. So if you have 500 your, you need to go to each of them and the value Stream Sync event 500 times.

• Satellite P300: Error BSOD STOP: c0000139 {entry point not found}

  I had this error a few weeks on my Toshiba P300.
  When I start my laptop it appears a blue screen with an error for a fraction of a second:

  STOP: c0000139 {entry point not found}
  The procedure entry point ntoskrnl. ExiAcquireFastMutex is not found in the library of dynamic links Hal.dll.

  Then normal startup of Windows Vista.
  I get this error when I start the computer from the Hibernate mode. What does this error mean?

  I also have problems with my built-in webcam. I get the message: "locked by another application." I already reinstalled the software I downloaded from the site, but that did not help. The error has something to do with the webcam this doenst work properly?

  I put t know what can be the problem, but you must use restore system and OS rollback to an earlier time before this error message.

  Subject of webcam, please visit http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=131308

• Qosmio G30-102: sound distortion occurs mainly when games are played

  Does anyone know how to solve the problems of sounds with the Qosmio G30-102? I installed all the drivers in Vista. Sound distortion produced mainly when games are played. Also reinstalled direct X9.c. Thank you

  Sound problems appear only while you play games?
  I think that this laptop has been delivered with Windows XP MCE has this same phenomenon occurs on Windows XP?

  Driver sound installation or update? It seems that the Toshiba driver page provides the audio driver for Vista for Qosmio G30-112 PQG32.
  The latest version is a pilot of its sigma 6.10.5324.

  By the way; Control Panel audio SigmaTel provides some useful parameters.
  There, you should turn off (disable) the power management!
  In addition, you can try to play a little bit with the digital Dolby Virtual Speaker dolby and pro logic II parameters.

  Check it out.

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Indicator signal a1 Tablet WiFi stopped turning green when connected - good internet connection

  My WiFi signal strength indicator A1 Tablet has just stopped turning green when he has an internet connection and WiFi. I can't find any discussion on a problem like this. The problem appeared after that I did a boot into recovery (hold "volume" while turning on Tablet) to fix a touch screen calibration problem that had developed recently. I guess it is not essential to have the signal strength indicator works perfectly, but it would be nice. Someone at - it experience with this issue?

  If I am not mistaken, this means that your A1 is not synchronized with your Google account.

  Try logging in the game store. That could convince the A1 to connect.

  If the problem persists, you can remove the ' storage "(fait dans les paramètres > apps > tout);"» Calendar, Contacts, and electronic mail. Then restart and re-add your Google account. Who should start your A1 resynchronize.

  Note that everything you have added to the calendar, Contacts, or e-mail that was not synchronized will be gone. But all that has been synchronized with your Gmail account will return once the synchronization is complete.

• VISTA computer does not start until "STOP: 0xc0000139 {Entry Point not found}".

  Original title: computer VISTA will not start

  I get this error when you try to start my vista 32 bit

  blue screen with:

  Stop c0000139 (entry point not found)
  Wcsncpy_s procedure entry point could not be located in the dynamic link library ntdll.dll.

  tried to start in every mood and nothing works. Help, please

  Hi Ad-HocHelp,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Run the Startup Repair tool, follow the steps mentioned in the link below to access the system recovery tools.
  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have 4 GB of RAM, but when my i play any game, my CPU fan runs at high speed and my system gets shut down within minutes.

  I have 4 GB of RAM, but when my i play any game for example NFS most wanted, my CPU fan runs at high speed and my system gets shut down within minutes. Help me solve this problem

  If you overclocked?  If so, cancel that.  If the games you play are poorly written, it is not that you can do about it.  If you have not cleaned the dust and lint from your computer within a certain time, you should do that because it accumulates and causes overheating.  For desktop computers, remove the cover and carefully use compressed gas to blow off the dust, especially around the fins in the processor heat sink and air ducts.  For a laptop, I'll ring gas compressed through the ventilation openings.

  Good luck.

• Pass an audition freezes when I press Play

  Just as the title says. As soon, as import an audio file and press play audition freezes and stops working. Is there any solution to this?

  If you say that when you press play, nothing happens (i.e. no running transport) then the audio device will not be properly connected to the hearing - it is the only thing that causes this. Go to Edit > Preferences > Audio hardware and ensure that a valid device is connected and give him another chance!