Slide the optimized quality vs high (24 bit)

Similar Questions

• Audio Fadin incoming and outgoing, but the video quality remains high.

  Hello. I am regularly skyping someone, but the incoming audio signal began fade in and out and sometimes mute altogether. The video quality is very good and she can still hear and see me OK. The volume for Skype and everything else is wound up to the maximum. I tried skyping someone else and the problem was not present.

  I do not understand how the audio quality that I can fade, but the video quality does not change. I would have thought if they had problems of band bandwidth then the video would have refused and the Lady, I'm not talking would receive me in this good quality either.

  Is anyone know something about this problem and a possible solution?

  Thank you

  Hello. In the case where someone comes across it because they have the same or similar problem I found the solution. It turns out, somehow, that the volume of my microphone had been wound up to the maximum. Because Skype reduces the audio signal entering when you make noise, the person I was calling I couldn't hear because I was broadcasting involuntarily every tiny noise. This interrupts my incoming audio. For some reason I have the microphone picks up a ridiculous level of background noise. Only, I discovered this after a test of back to back with my mother's laptop. To stop the problem I just wrapped up my microphone volume down in audio on Skype settings until there no sign up tapping or other noises. So I send you not now sounds that would hurt my incoming audio. It also explains how the Lady I was calling could still hear me fine and the quality of the video never abandoned, but the audio signal coming at my end was.

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to find the Web sites of high quality backlinks?

  Original title: how to find quality backlinks?

  Updates on the algorithms research of new google forward a site spammy that build a bad backlinks. But how to find the Web sites of high quality backlinks? Could we must spend a lot of money to get their links?
  Please help me.

  I want to increase backlinks to my site

  Hello

  I recommend you contact Google support for assistance:

  http://support.Google.com/bin/static.py?hl=en&page=portal_groups.cs

  Hope the helps of information.

• Workflow to ensure the best quality print files

  I have a number of birds in flight photos that do not whole screen. I want to crop the part of the image and print it.

  I want to complete the process in Lightroom cc, however the impression that I get on the web, is that Photoshop has tools higher resampling.

  What is the optimal workflow between Lightroom and Photoshop to get the best quality print file?

  I had to rate an image for printing several years ago and made some tests using Photoshop, Lightroom and some third-party software, resize possibly perfect.

  It turned out that Lightroom has produced the best picture, followed closely by Photoshop.

  The image produced by the third-party software maybe was a bit stronger than the others, but it seemed unnatural.

  You can easily test yourself - create images in the same dimensions in pixels of Lightroom and Photoshop, then compare them to view 100%. Photoshop you give several resampling options that produce slightly different results, try bicubic and bicubic smoother.

• Problems with the sound quality poor or distorted, watching Youtube videos

  Hello

  For these last days, I had a very annoying problem with playback of youtube videos since getting the latest update to Adobe Flash Player. The sound quality while watching videos is just terrible. Depending on whether it's a song with a lot of bass, singing or just commented video distortion is different. It's a craking, static-y sound, like a badly tuned radio in some cases. A few videos, in particular with certain frequencies of sound as I have said, can be a highly distorted.

  I've been quite well, with audio all around perfect before you accept the update. I didn't place Adobe Flash as the cause for a while, but after eliminting causes so many others, Adobe Flash, that's what I feel, that's the problem. All other audio sources on my computer are not yet perfectly (iTunes, MP3, MP4, etc.), it's just youtube.  I also tried other sites such as Vimeo videos I thought running with flash as well and really did not notice the distortion, but also I can't find a perfect video comparison, so I really can't be sure and do not want to exclude them. YouTube is the only one I can say absolutely not is affected badly. I checked my firefox Plugins and the Shockwave Flash plugin is indeed turned on. It happens also, regardless if I have a video to youtube with Firefox or IE. And one final note, I'm the administrator of this computer and the only user.

  I run Windows 7 64 bit

  I use Firefox as my main web browser.

  I have the latest update of Adobe Flash (11.2.202.228).

  I use a laptop Toshiba M645-S4070.

  Intel i5 processor

  4 GB of ram

  Realtek High Definition (I think that it is the sound card)

  I searched through discussions both here, on assistance from microsoft, and through google search in general try to resolve this and nothing has worked.

  I tried uninstalling and reinstalling, with and without restarting the computer complete between the facilities/unistalations, update my sound card drivers, check and disable my firewall during installation, installation offline, have some audio enhancement of course checked was leaving (right-click on the youtube video > settings).

  I'm really at a loss, and it can be painful to use youtube now as things. Also, if I need to post more information my computer please tell, since I'm not very knowlagable how to get specifications more than what I posted.

  Hope someone can help, thanks.

  I had the same bug with its bad, especially on scraps of bass-heavy sounds, but I found a job nearby

  Click Start-> Control Panel-> Flash Player-> advanced

  I deleted all of the "data and Site settings.

  Sound is back to normal now.

  I hope that helps!

• How can I get the most out of my 24 - bit audio?

  We recently did a project where all our audio has been sent to digital recorders to 24 bits, 48 hen k. I import the files in the first it does not appear that all of the problems, but I can't find the settings when creating a new sequence which allows to use the 24-bit audio (only 12 and 16-bit). If someone could help me understand what follows I would be very happy:

  1. are there parameters of use of 24 - bit audio in a sequence? If Yes, where?

  2. If there is no setting of 24-bit, does this mean that my project is about the original high quality file even if the sequence is fixed at 16 bits? Or is my 24-bit audio being changed to 16 bits when I drop in the sequence?

  3. I guess the main question is: is it worth for me to use 24-bit audio in my projects?

  Thank you very much for the help.

  Avery

  For the standard output formats of PrPro, Audio will be sous-échantillonné to 16 bits. Now, when you import, PrPro must respect these files to 48 kHz 32 bit floating point (in format CFA) for editing.

  Other than an editor audio, such as Adobe Audition, I think that the 48 KHz 16-bit will be as good as it gets.

  Good luck

  Hunt

• How to download the best quality videos in dreamweaver

  Hello

  I'm trying to figure out what format and size I should convert my video 1080 x 720 to for import in DW. Owen

  1080 x 720... It is a strange aspect ratio... Well.

  For the best coded compression, use H.264 to create an mp4 file at a rate not to exceed the speed of download Internet connection the majority of your audience. If you are not familiar with the download speed, test your here:

  www.Speedtest.NET

  To examine the bitrate:

  Video bitrate

  One of the principle of goal setting is to "begin with the end in mind". In this case, it will be very difficult to give good recommendations because the end is not defined. So I'll just make a few assumptions and you can correct me if necessary.
  First, I'll assume that you convert Flash, whether you want to broadcast this video on the Internet. If that's true, then going to make some assumptions about your potential viewers Internet connection download speeds. Let's just say that most have at least a 1.5 MB connection or faster.
  OK, that would mean that a video bitrate of half that generally provide a video download that is not interupped by the buffering (most of the time anyway). So assuming a video bitrate of 750 kbps, what would be the optimal display size?
  Before decide us, here's a little info on the bitrate. To read more high quality, the bitrate of the video is directly related to the size of the screen. In other words, more display, incoming data more are needed to correctly display the video. Think of bitrate in terms of a can of paint. If you have 1 quart of paint, you might be able to do a very nice job on an area of 32 X 24 feet. But if you try to stretch the same amount of paint on a surface area of 64 X 48 feet, the coverage is not as good and you get mediocre results.
  Similarly, a video display to 640 X 480 pixels will require 4 times the baud rate as a video displayed at 320 X 240 pixels to produce the same quality. Thus, for example, a video with a speed of 100 kbps, 160 X 120 displayed will produce the same quality results as a video with a bitrate of 1600 kb/s is displayed in 640 X 480.
  So, to sum it all, 750 Kbps, even up to 1000 kbps video rates can usually get delivered high-speed Internet on most connections. Higher rates may work for connections very fast but will cause problems for viewers with slower connections. Video display size has a direct impact on the final quality. In the range of 750 to 1000 Kbps, display size should be maintained around 450 or 500 width max (and whatever the height proportions claims). Yes it can be displayed larger, but the quality will suffer.
  Sounds like the audio settings are fine, especially for delivery on the Internet.
  Regarding the framerate, maintain the framerate video original raw for best results. Therefore, if the clip was shot at 24 frames per second, let him.
  In regards to video converters, you have the Flash 8 Video Converter? It works very well for the video to be delivered over the Internet. Don't forget, you're taking a Cadillac of video (h.264 HD) version and cram into a Chevy body so he can work on the Internet.

  Best wishes

  Adninjastrator

• The image quality of MacBook Air vs Pro

  Hello

  I just bought a MacBook Air 13 "and I got a MacBook Pro 13" (non-retine) till now.
  If I compare the image quality between Air and Pro there is a difference of contrast and sharpness of the colors. The monitors setting is the same on both Macs, the Air is even supposed to have high resolution (1440 x 900 instead of 1280 x 800, the MacBook Pro). Graphics card is Intel HD Graphics 6000 1536 MB vs 4000 in my MacBook Pro.

  Anyone know if there is a difference in both computers display technology, or if this could be a problem in my Macbook Air?

  THX in advance and best regards

  Products and specifications:

  MacBook Air (13 ", Anfang 2015)

  Intel Core i7 2.2 GHz

  8 GB 1600 MHz DDR3

  Intel HD Graphics 6000 1536 MB

  LCD display is different between Pro and Air. Don't know which group is better.

• HP 2050 j510 series change the print quality options all greyed out help? Project custom quality etc.

  Hi I just installed this printer on an operating system of Windows 7 32 bit, but on the quality of implementation page/impression of two tabs only page layout can be changed all options are greyed out it is deliberate to stop printing in draft print quality or quality options above that this has no sense here that I hadn't bought this printer now as she gobbles up ink and I can't change the print quality at first, I was disappointed that now I would never never buy another printer HP unless HP or someone can help you. Printer is brand new, right out of the box, but HP only support expensive paid as it has been manufactured since more than a year! How bad are only only he registered today for the first time!  Thumbs down for HP!

  Hi charlieelston,

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print using this driver for the Deskjet 3050 printer. I would like to know if you have the same problem?

• Help the spikes of voltage high frequency Counting

  Equipment: NOR USB-6229 (250 ksps / s analog in., 16 bit DAC, 32-bit counters, and internal clocks)<= 80="">

  LabView 14

  Problem:

  I have an experimental app where I need to count the points of tension (entire #) caused by electrons striking a sensor. These tips can be as frequent as 500 000 heads of charge/sec. The tips aren't going to be the same tension every time, but they will be visible above the noise, so I need allow the user to select a threshold voltage that triggers a true count rather than the tips of noise.

  Attempts:

  To count such a high frequency, I gather that I need to use a counter entry to read fast enough, HOWEVER, I wasn't able to find a way to define a threshold of voltage for a counter entry because I think they expect a TTL signal anyway, which I won't. To set the threshold, I realize reading of analog input can be triggered at a point chosen, which is great, but the Analog Input sampling rate is only 250 kech. / who will not catch count each in my project.

  I have a program that uses the channel count edges and it is accurate to 3% of the # expected charges. I was looking at him just with a function generator and the program does not count unless the signal voltage is higher than V 2-3 who does not work for my application. I'll post what I have. Someone know how to trigger at certain levels of tension using counters, or know a way to filter through the noise to get real tips?

  Thank you!

  You will need a device with a sampling rate of greater than 1 MHz analog input or you will need an external reference. With the external comparator, you can use output to set the threshold, although the user would not be able to see the signal or the threshold, only the analog account result.

  Lynn

• 5520, I don't have the best quality on the predefined menu print option.

  Hello, please can help you. I don't have a BEST QUALITY printing on the options menu. I can only print fast draft or quick project black and white as shown below. Please advise, thank you.

  Hey there @lh39!

  I should be able to provide assistance on creating a new preset!

  Looking at the screenshot your provided it seams like you're very limited to the print settings.  I would recommend open TextEdit on the Mac computer.  TextEdit is located in the application folder.  The only reason why I recommend the use of text edit is just to create the new printer preset for optimal quality.  Once you have TextEdit open go to file and click on print.  You should get a preview window before printing.

  Please follow the steps:

  1. click on "Show details" if it does not say "hide details".

  2. choose "paper Type and quality.

  3. change the quality of 'best '.

  4. click on the drop down preset menu

  5. click on "Save current setting as a preset.

  6. type your name of preses (E.g. best quality)

  7. click on OK and reset your is now registered

  

  

  

  

  When you have finished creating the preset, you should be able to open your original print job and choose your new preset!

  Let me know how it goes and thanks again for the display on the HP Forums!

• The image quality with the Canon 5Dmark 2 vs... The 5Dmark3?

  I use Leica lenses on a canon with an adapter body.  Is the image quality with the Canon 5Dmark 2 vs.the 5Dmark3 similar?  A reason to get one against the other?  I like the idea that I can change the viewfinder on the Mk 2 screens. Any overwhelming improvement in the 5Dmark 3 that would justify the review?  Thanks to those who have used the two boxes.

  The main advantage of a Mk3 on the Mk2 is the AF.  Most points and it can focus with f/8.   If your Leica lens is manual focus, then you would not care to this topic.  3 5 has a bit of an advantage in the ISO but not a huge factor.  Another one, I'd say that IQ is the same.

• I took a video on my Android phone that is currently playing in Windows Media Player 90 to the horizontal. on VLC player, but the image quality is very poor on this player.

  original title: video orientation

  I took a video on my Android phone that is currently playing in Windows Media Player 90 to the horizontal. I tried to watch the videos on VLC Player, but the image quality is very poor on this player. I have Windows XP Home Edition so the moviemaker product will not work. Are there other options available to get my videos to play properly?

  You can rotate the video to display in VLC media player:

  Open an it... then video and pause go to...
  Tools / effects and filters / video effects tab / geometry tab.
  Select the check box turn / slide the circle / close / play.

  If you want the video permanently turned... Movie Maker
  worth a try, but you will need to convert the video to the
  . Before importing WMV format.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• The sound quality is poor on the Bluetooth headset while using the Bluetooth dongle

  Original title: Bluetooth with apt - x audio problem

  Hi, this is my situation.

  • Windows 8 installed on the PC.
  • Have a Bluetooth Sennheiser MM500 x with apt x helmet
  • Have a Sennheiser BTD500 USB dongle to connect headsets to PC.

  It is:
  Sound works, but the sound quality is very poor. Also very low microphone level.
  For purposes of disposal processes:
  • Have connected these headphones using headphones - audio jack perfect
  • Connected headset to another for TV and PC bluetooth dongle (which uses the headphone) - audio perfect
  • Appropriately high sound levels (mean level appropriate, but not obvious)

  In "playback devices" I am unable to click on the button set up (it is grayed out). Therefore impossible to then select a stereo sound.
  I don't think that there is a problem with my headphones or usb dongle. Believe is a matter of windows 8.
  Help, please! I'm about to throw my PC out the window!

  I'm the original poster. I tried everything, could not solve the problem. So I sold the helmet and moved my life! Haha. Good luck to all.