slot putting tension of the printer is not recognized

Similar Questions

• I can print but does not scan because the printer is not recognized

  Hello

  Like the others. I have a HPDeskjet 1050 of J410 all-in-One printer. He is an all-in-one printer that has printing, copying and scanning. I tried to install its software device driver. However, recently, I found to do the scan function, the result?, windows fax and scan said that are without a scanner connected everytime I try to scan. It's very surprising because the print from the computer very well. I tried a different USB port, no change. Please someone help me with this problem quickly because I need to analyze a large number of documents for my school work.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with the scanner.

  This could be due to hardware conflicts.

  Try the methods.

  Method 1:

  You can use try scanner installation by manually adding in devices and printers and check if this can help, solve you the problem.

  To add the device manually, follow the steps below:

  1. Click Start and click on Control Panel.

  2. Select display large icons.

  3. Select the devices and printers.

  4. click Add a device and follow the instructions to install the scanner.

  Method 2:

  I suggest to run the tool and troubleshooting hardware devices and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• LaserJet M1122: Printer is not recognized by NAS LenovoEZ

  Hi guys, I have buy a new brand Laserjet and I plugged it in the center of storage of LenovoEZ USB to share the printer on the network.

  Instead to recognise the Lenovo shows a 'shared device' as if the printer was a USB key with some drivers.

  The printer is not recognized as a printing device, and I have all the Office on my neck.

  I'll wait your comments.

  Mariano

  Hi Mariano,

  I recommend that you check with Lenovo,

  As you mention, the printer is fully functional with your WIndows XP and 8.

  There are different factors to conseeder on a print server.

  It is the driver for the specific printer?

  Support a printer based on the host as the M1132?

  Lenovo may be able to provide a better response to those as being familiar with possible configurations and capabilities of the print server.

  Shlomi

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• C1765 done yellow toner a printer roller noise rattling and the printer does not work

  Hear a clicking noise when printing.  Replaced the yellow toner and the rattling is still strong and the printer will not work.  The noise and the vibration felt on the new toner only occurs with the yellow toner.  What is happening, is the printer goes wrong.  "low density, yellow to replace the cartridge, printer restart" I just put in a new cartridge.

  Hello David,.

  Please post on the forum. According to the information you provided, it looks like you have a mechanical failure within the printer itself. This device is more compact and carriers Dell limited parts, the best option at this stage would be to replace the printer. It is the course of action we would take if the product is under warranty.

  Kind regards
  Joseph E

  #iworkfordell

• Want 4500: I get a message saying that the "the printer is not connected.

  I just bought a HP Envy 4500 all in one printer.

  I can't print to it without having to restart it every time.

  I get a message saying that the "the printer is not connected.

  I can access the built-in web server, so I am sure that it is connected.

  It seems that he is going to sleep but cannot be awoken by activity.

  I checked network settings changed and tried to change the Hello Service of priority higher to 9100 (because the default Internet Printing Protocol) seems odd, but makes no difference.

  The State indicates that the power of the wireless signal is 5 - that sounds just because it's six feet from my PC that has a great wireless signal.

  I uninstalled and reinstalled the printer.

  The restart is only viable if the printer is restarted and sent instantly - work if you wait a few minutes (energy saving option is set to 15 minutes and it's inside that) is the same thing - the said printer dialogus "Opening conection printer" and then, almost immediately, "the printer is not connected.

  If I try to scan I get an error-9923

  Hi @jpkeates,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Envy 4500, once he falls asleep on your computer Mac OS X 10.11. I'm happy to help you!

  Please, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). It is also important to ensure that:

  Make sure that the multicast is supported

  If you use a wireless network, make sure that muticasting is supported and enabled on your router.

  If the new connection is working, you know that the printing problem is tied to the computer.

  If the new connection does not work, then the printer may need to be repaired or printed using a different type of connection.

  Disable IPv6 (network connection)

  Disable IPv6 on the printer to make sure IPv4 is used on your network.

  If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it to Off or disabled.

  If your printer does not display, use the built-in web server (EWS) to disable IPv6.

  From a computer on your network, type the IP address of the printer in the field URL of your Internet browser.

  NOTE:

  If the Web page appears empty, try another Internet browser.

  Click on the tab network or network, and then open the section or page corresponding to your type of network - wired or wireless.

  Select enable IPv4 only (or similar).

  Figure: Configuration example IPv4 using an integrated Web server

  

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide and help the steps!

• 8600, connected HP says there is a problem but the printer does not work

  I try to use a 8600 e - all - in - one. It replaced a 8500 who has never had a problem with eprint to an email address or as a printer of google cloud.

  With the new printer, when I get it in hpConnected correctly identifies the printer and it's e-mail address. He says he's online. It also gives me the warning sign of exclamation to a printer problem. When I click it says that there is an unspecified error and see the front panel of the printer. No error on the front panel of the printer.

  If I send print jobs via the address hpeprint, it works every time.

  Because hpConnected said that there is a problem: the page of the google cloud reports that the printer is offline.

  Connection is complete Hughesnet, so that might be a contributor to the problem.

  I finally solved this problem. I reinstalled an old Windows laptop-based printing software and now hpConnected said there is no problem. It's strange because the printer is not physically connected to any PC. It is wireless only.

  To solve the google cloud printing problem, I disabled the Web Services and then reset the default wireless property. When I went through the Setup Wizard again, it gave me a new code of acceptance. I got to hpConnected and then added the printer to the Google Cloud Print/HP dialogue page.

  Now, things work as expected.

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• HP software detects the printer, but then "the printer could not be installed on the network.

  I tried looking for a similar problem, but have had no success yet.  I doubt I'm the first to this problem!

  The computer is XP SP3, is printer Deskjet 3050 has, and it's a WiFi WPA - PSK.

  The printer confirms that it is connected to WiFi.

  When I run the tool on the computer, to the point of network configuration check, the installation software detects the printer with the correct IP address.  It's the only thing he discovered.

  I click Next, and after a minute or two, I get the error "the printer could not be installed on the wireless network" click Retry to try reinstall the printer on the network, or click Cancel to return to connection options.

  This just cycles with no progress.  I have disabled the Windows Firewall and also disabled the AV.  No change.

  I can access the interface web printer - but still cannot install the printer.  It is listed in the printers and faxes as being offline.

  I'll try removing it again and add new-but-that someone has encountered this problem before, please?

  Well, my problem is almost solved. I uninstalled the software and then downloaded the software of the printer on the HP site where it is more recent than what was on the CD... and it's fixed!
  
  I can print wireless!
  
  Cannot scan, the printer gives an error, but that's OK for now.

• HP all in one 6200 series ceased printing. Indicates the printer is not working online.

  After printing a document on my HP All in One 6200 series to my computer today, when I tried to print the following document, I got a signal to check color cartridge.  I checked it, ink was low, but I was not printing in color and black cartridge is full.  I pushed OK according to the directives and the signal is output, but then would not print my document.  It shows the printer works not online; However, the computer works online, and I was not able to solve this problem to find a solution.  Feedback would be appreciated.  My computer is Vista.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

  The steps in this troubleshooting page may help as well.

• HP Premium 8600 - using OSX 10.9.4 with wireless and don't keep saying the printer is not connected

  Use the printer for a few months with no problems.  Now, out of the blue, I can't print.  Keeps telling me that "the printer is not connected" and "search for printer.  I see that the printer's system preferences.  So the printer is there. Why is this suddenly happening?

  If I disable wireless to the printer and then turn it back on, I can print maybe one or two times and then get the same message.

  What is the problem here?

  Hello

  Please, try unplugging your router from the power for 10 seconds, plug it back and leave 2 minutes to initialize.

  Then turn your printer off and turn it back on and allow it to reconnect.

  You can see any difference?

  If this isn't the case, please also restart the Mac and check for the difference.

  Shlomi

• The printer does not and not listed on computer

  I got my printer working and we had power cut off for most of the day, now the printer does not work and I can't even see the printer on the computer more.  I thought I would unplug everything and he can resume No. when I tried to start the printer but it wont even start.

  Hi Burrabliss,

  1. what version of Windows operating system is installed on your computer?

  2. What is the brand and model of the computer?

  Because you cannot start the printer, it might be a hardware problem, I recommend you contact the manufacturer of the printer and check if it helps.

  Refer to the steps in the following Microsoft article.

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Photosmart 6510 "the printer could not connect to the server.

  Hi all.

  Just try to find this sorted hope someone can help.

  I am able to print irelessly of all our devices with no problems at all.

  However, when I click on the control panel applications he repeats me "the printer could not connect to the verification of the server of the internet connection and try again or enter a proxy address.

  I use an Imac with airport wifi router.

  Doing a search in the forums and on the manuals troble shooting pages, nothing seems to work.

  Thanks in advance.

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP ENVY 4500: Error: the printer could not print

  After a saga of long hours to get my new 4500 DESIRE to produce a readable text, I finally have a wonderful clear text, but now realize a new problem: the printer stops at Midway through each second page and it spits out just with the white background.

  An error message appears briefly in windows that said "the printer could not print. If I click on it there is no more details. It seems that windows stops just sending information to the printer. My print spooler service is running and we are within 5 feet of the router with a strong bond. I did everything I can think of including updating the firmware and driver.

  Any ideas?

  Thanks for your suggestions! However, most did not address my problem. I ran the Print and Scan doctor before posting this thread, but it found no errors. I was unable to get any additional details about the error.

  SOLUTION: I found a solution after reading this thread. I've updated Windows 8.1 a few weeks since the last time I had the printer works. I've updated Windows again today and the problem immediately went away.

  Although I couldn't see everything concerning him spool printing or printer in the update drivers, it seems that the bug was caused by a Windows Update, and subsequently fixed by another update. I was able to print a 40 page document and several page 5 those without any problem, when before it was bad, making it through several pages before he died. Fixed!

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.