Slow boot after I installed updates to Windows.Currently, Im using Windows Vista Starter

Similar Questions

• Download 80080005 error message when you try to install updates in Windows Vista.

  Original title: error 80080005

  Hello

  I'm still not able to run windows update. Automatic repair of Microsoft did not work, nor has repaired all in one Windows. I get error 80080005. Someone at - it ideas please. I am running Windows vista SP2.

  Hello

  Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.

  Try these methods and check:

  Method 1: First of all, make sure that no proxy server is causing this issue.
  a. click on the round to start, in the search field type cmd
  b. right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.

  c. has the prompt, enter the following command exactly as written including spaces and press enter

  netsh winhttp see power of Attorney

  If this message appears, type exit, and then press ENTER.

  Method 2:

  Check if the bits service is started.

  a. click Start, type services.msc

  b. Locate the Bits (Background Intelligent Transfer Service) service.

  c. double-click on it and check if the service is started and the startup type is set on automatic.

  Method 3:

  I suggest you follow the steps mentioned in the link one at a time and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If the steps do not help, then follow the steps in the next method and check.

  Method 4:

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Method 5:

  I suggest you follow the steps:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  After you follow the steps of troubleshooting provided, if you get the error message please response so that we can help you further.

• Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:

  WinVer the OS details appear. If no SP1, download & install it

  https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx

  Use this link for download.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista

  This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'

  Microsoft.

• Not able to install updates in Windows Vista, error 64 C.

  Original title: ERROR 64 c

  Impossible to update windows vista home edition

  Hi Jennifer,.

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that you can not install updates in Windows Vista.

  However, we need more information about the issue to help you better.

  Please answer these questions to better understand the issue:

  1. have you tried to manually download the updates from the Microsoft Download Center?

  2 have you made any changes to the computer before the show?

  3. when exactly you get this error?

  4. is the problem with the specific update?

  I have a couple of steps that should help you with this problem.

  Method 1: Please run the following fix - it:

  The problem with Microsoft Windows Update is not working:

  Method 2:

  Try the methods mentioned in this link and check:

  This problem may occur if Windows Update or Microsoft Update cannot locate the downloaded update.

  Error code when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0x8007064C.

  http://support.Microsoft.com/kb/958055

  Keep us updated on the status of the issue. For any help about Windows, you can still post on the Microsoft Community.

• Not able to install updates in Windows Vista.

  Original title: no update: alert

  I had trouble with my PC and only come to discover that my updates have failed since April 14, 2011 - that is to say 95% updates failed. Can someone help me... Please? I'm a complete Newbie, so who takes up this challenge will have to be very sweet (and patient!)...

  Hello
   
  1. What is the exact error you get when you try to install updates?
  2 have had any changes made to the computer before the question?
   
  Check out the following link and check:
  Method 1:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  
   
  Method 2:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
   
  Answer comes back with more information on this subject so that we can send us your request in an appropriate manner.

• 800b0100 error code when you try to install updates on Windows Vista

  Error 800b0100 code happens while trying to make updates.  I recently went back to the default factory settings and I try to do all the updates.  I used the updater and fix it also.  I restarted the computer and still no joy when you try to load the update for windows vista.

  Hello

  · Do you get this error when the individual any update installation (such as Service pack updates security etc.)?

  Method 1: Turn off the firewall and antivirus software of third parties.

  Step 1: Disable the firewall

  (a), click on Start and type Windows Firewall.

  (b) click on Windows Firewall.

  (c) click on firewall Windows turns on or OFF.

  (d) turn the Windows Firewall until we have install Windows updates successfully. If the problem persists then please continue with the next steps.

  (e) once we install the updates, please turn on the firewall.

  Step 2: Disable the anti-virus application installed on your computer. Disable the antivirus firewall.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps under step 7

  Also see: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-800B0100

• Error: "updates not configured correctly" not able to install updates in Windows Vista.

  Original title: updates not configured correctly.

  With the many others who face the same problem.

  I get "Updates not configured correctly".
  After waiting for centuries, "returning changes."
  "Fix it" does not help, as usual.
  Supposed to be important updates.
  Microsoft will never get this sorted shambles hike?
  With the exorbitant profits they make, why not recover?
   

  Hello

  You did it changes on your computer before this problem?

  You can follow this link & check if the problem persists:

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  
  Reference: the problems with installing updates

  Hope the helps of information.

• After you download updates in Windows Vista using my friend constantly "impossible Configuration.", returning changes

  A friend becomes "Configuration failed, changes of recovery" after the download of the Windows updates.

  His PC is running Vista, and the problems started after a period of 3 months when the computer was not in use.

  Download updates (15 of them) successfully, but no 'Configure', and then she gets "Configuration Failed, recovery changes, do not turn off your computer.

  Any help would be appreciated

  Hello

  Try the procedure described in the following article:

  Step 1: Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  Step 2: The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7: http://support.microsoft.com/kb/949358

• code 80070002 error appears during the update of windows vista starter

  During windows vista starter updated operating system, the 80070002 error code appears on the screen and could not update and install something. How to solve the problem? Product key-33qmg-pb76m-kbpwd-mbqd3-k6ggk

  Sylvie chandrasantra,

  80070002

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.

  http://support.Microsoft.com/kb/956698>

  05/14 / 1104:51: 22 am

• How long does take to install updates for Windows Vista after a new installation?

  Hello

  I'm trying to fix an old computer that I had lying around the House. She has Windows Vista installed.

  Today, I performed a clean installation of Windows using the recovery partition to try to make things a little more zippy.

  I know that Windows Vista is released some time ago, so I know there will be lots of updates for me to install. My question is how long approximately would it take to install all updates and get the operating system? It's a very slow computer at first.

  Thank you

  Daniel9435

  Daniel

  There is no way of knowing.  It is dependent on the speed of your connection, your CPU speed, etc.  They can even not available altogether at the end of standard support for Vista time.

• Cannot install updates for Windows Vista. Get the following error: A 80071, 30. Help!

  I tried to install the updates and I get notice of failure with code A 80071, 30.  Help! I tried installation manual, automatic restart of the diagnosis.

  Thank you!

  Vista SP1 or SP2 installed?

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  What is your full version of windows (32-bit or 64-bit) and service pack level. (Right-click on my computer and select properties: Windows version which is displayed on the general tab that results (for example, Windows XP Professional Service Pack 1;)) Windows Vista Edition SP2 family)?

  you use what browser (exact version).

  what application anti-virus or security suite is installed and your current subscription?

  A 3rd party firewall is used instead the native Windows Firewall?

  What other software products anti-malware are installed and running?

  What updates you trying to install? (Number of KB)

  Please do it in your next reply.

  Information you provide will help someone to provide you with a relevant solution.

  Go to the next article via Internet Explorer (only) & run the fix it in DEFAULT mode and AGGRESSIVE 50202 .

  Try to reset the Windows Update components and see if it helps. See the article below mentioned the same thing.

  How to reset the Windows Update components?

  UTC/GMT is 20:52 on Saturday, December 17, 2011

• After doing an update of windows vista Theme is mucked up!

  I recently installed an update for my laptop (acer aspire) and the theme of windows vista was classic. Im a computer wiz and cannot find any solution. Ive looked for a theme aero screen refreshes 'PLEASE WAIT' and nothing other that my wallpaper has changed. Now its very annoying and need help ASAP!

  Hi CorrieGreen, I suggest you from the link to run the steps troubleshoot windows aero. http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

• Lexmark x 73 will work after that I updated to Windows Vista?

  Original title: lexmark x 73\windows vista

  I have windows vista and I want to install my lexmark x 73 prints I will update of windows, but I don't know to update and it'll work

  Hello Betty,.

  According to their website, the X 73 is a laser printer that works on the XP Windows OS only. So if you have this impression under Windows, it must be in compatibility mode. Is this the right printer, or you have a different model?

  If this is the right printer, it will only work on a 32-bit operating system, so you'd be lucky so he can print in Windows 7 Home Premium, 32-Bit operating system. Can you confirm the model number for me please? And your version of Vista is 32-bit or 64-bit?

  If you can answer these questions, I will try to provide you with further assistance.

  Kind regards

  BearPup

• Can not install updates in windows vista

  Windows vista tries to download updates, but fails to do so. The following message if poster - updates are not configured properly restoring changes. Updates that all start with Ko. The computer had tried to download the same updates many times. My computer has sp1, windows vista premium 32 bit.

  Hello

  You can hide unwanted updates in windows update.

  Check out the link: http://www.petri.co.il/hide_updates_windows_vista.htm
  Thankx

• No sound in Windows Vista Media Player after you install updates to Windows Feb 2012

  Help, please. Feb 2012 updated windows installed without crahing but now I have no sound in windows media player 11. I downloaded the new codecs to cnet, but which did not set me. More trouble again – UGH!

  Hello

  Are you able to hear the sound of the computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race he difficulty of the link and check if the problem persists:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  If the step above is unable to check if Windows media player is not muted in the volume mixer. Follow these steps to check:

  a. open Windows media player.

  b. click on the volume icon in the taskbar.

  c. click mixer.

  d. in the list of applications, make sure that the volume icon is not silent for your Windows media player. If he is silent, then turn it back on.

  e. check if the problem persists.