Slow NAS using Explorer file copy

Similar Questions

• Cannot use the files copied from Windows 8/7/Vista in windows XP.

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  How is the "pen drive" formatted - with what the specific OS file system?
   
  This is more likely to be a file system - do not operating system (although related, not as much as you might think)-problem.  Another possibility is a problem hardware or bad driver on the machine Windows XP itself.  It could also be, although rare, an incompatible 'USB key '.
   
  What is the 'pen drive' is formatted with the file system is essentially - the first question to ask.  Then - if I were you - I everything on the 'pen drive' copy on a computer which can be read - if committed to the machine more common denominator (in this case the Windows XP machine) you will use and FORMAT this 'pen drive' using this machine.  One of the few possible things will happen no doubt...

  (1) you'll find you format it with a version of NTFS that will work in all areas - all the machines that you can use with Windows XP or more on them.  Then this problem will disappear.

  (2) you will find there * is * something wrong with the Windows XP specific in question and this machine is not a problem easily solved this and your "pen drive" probably will work on someone elses machine Windows XP very well as it existed before.

  (3) you will end up with a FAT32 formatted "pen drive" that should work on most any system - as long as you don't need to transfer * really * large individual files.

• To use Robocopy to copy files, but you will notice that after the initial backup, it ignores the unchanged files, but I don't want it!

  Hello

  I use robocopy in Windows Server 2008 R2 operating system.

  Here #1

  I would like to use Robocopy to copy a disc (z) files on an external drive (f) and want to "full backup" every time regardless of whether the files have been modified.

  How do I do that?

  I tried to use the command

  Robocopy z:\ketchup f:\ketchup/e

  It works very well if there is nothing in this record, but once the initial order has been executed. It will skip all files of unchaged but I want yet it backs up to the top anyway.

  Want to #2

  I would like also to add a unique name that includes the date and time I'm it backup (in essense a new backup folder name that contains the date and time).  Hoping to place it under scheduled tasks as soon as I get going.

  Thank you

  Jess

  Hi Jess,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on Microsoft Windows Server public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• My windows Explorer stops working when I try to use the file menu on a file.

  My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) how often does the problem occur?

  Method 1:

  Step 1: You can check if the same problem occurs in safe mode.

  Please follow the link on how to start the computer in SafeMode below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: Choose a date before that the problem occurred as your restore point while performing a system restore.

  WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• By default Windows Explorer setting - copy the files instead of move

  Is there a way of installing the my documents folder (and all that it contains) so that it always copies files, rather than move them.  "I often move the files of people to my"my folder"Documents on my desk to work on it".  I'd rather have the files copied and not moved so that I'm not move or modify the original.  Is it possible to set this up?

  Depends,

  If you drag files click right use drag and at least, you can use the list of options to choose from.

  Or you can use Alt + EF and that copy into the folder, and then navigate to the folder.

• Very slow file copy speeds

  Hello

  Recently, I myself have built a new PC and am currently under Windows 8 Pro about this. I had a problem with copying files between spaces of storage/drives on the PC. Whenever I start a file copy/move operation, the speed starts usually at a respectable speed (ie. 40 - 50 MB/s) and then quickly descends and hovers somewhere between 50 Kbps - 800 KB/s, sometimes up to 0 KB/s for a few minutes. Try to copy a large file (ie. 10 GB) takes a few hours/days where on all my other machines it would normally take a few minutes. I tried to use Teracopy to see if it could work around the problem, but it seems to have the same problem. If I transfer a file from my laptop to the computer over the network (leave the laptop to control transfers) he will sit at a constant 5-8 MB/s well. Even less than ideal but much faster than what he does internally. I have also updated the bios on my M/B to the latest version just to rule out it as a problem does not.
  I was wondering if someone could point me in the right direction on this problem and help me figure out what causes the congestion. If it helps the machine is an i5 3570 k, Asrock Extreme 4 M/B, 16 GB of DDR3 ram and a Gigabyte 7950 GPU. I have also several HARD drives more a 830 SSD from Samsung for the system drive.
  If anyone can help me with this problem I would be very happy!
  Thank you!
  Chris

  Sorry guys for not not getting back to this sentence. I managed to solve my problem.

  I thought I would test all HARD drives in the storage space and running a benchmark on them to see if they are any ball game. It turns out that one of them was not. Its read/write speeds were about 1% of what all other players received.
  So I think problem solved... FAKE! My storage pool was divided into several spaces more that contains media files on single spaces more personal files and photos etc on two way mirrors spaces. It turns out that you can't remove just a drive from the pool as you can in WHSv1 if there is single spaces in the pool. I ended up having to save all my data on another PC (fortunately I do anyway!), remove all the spaces of the pool and then he'd let me remove the drive from the pool. After that, I could finally rebuild all the spaces and then copy all the data back on.
  If MS wants this technology to be taken seriously, they NEED to implement a way to replace failed or upgrade to larger without records to delete all the data, or it is next to useless.
  I hope this could help someone...
  Chris

• How to copy the database using rman file from another location.

  You can clone data base using the files of rman backup from somewhere else (on the server to clone).
  
  I have two server db source and clone db server.
  I normally copy the files of RMAN backup to clone server (under the same folder structure, as it was on the source server).
  
  The purpose of the test, IE I don't have same partition and free space on the source server and the clone.
  
  I usually use under notes to the clone.
  http://trysellit.com/hosting/Ttrail/Fajr.php?doc=wtrail & ND = 0556200
  
  I would try to explain for example again.
  In source server, my rman backup are stored in / U01 and clone server, I copied the files of rman /u04. What step I should take to clone to work anywhere else?
  
  Using Oracle 10 g on Linux RedHat.

  sape007 wrote:
  Thanks Ken & PrafullaNath.

  BUT my question is: how to transport .dbf files in another place on the clone (I already do).

  Rather:
  The clone is on another server. How to restore by copying the RMAN files from another location on the clone. Please read description above in its entirety.

  Sorry for not being clear.

  Please see my video tutorial. In this tutorial that I take backup of the database, copy the backup to the different server and perform a recovery disaster

• Corruption in large file copy to USB - Windows 7 Pro 64-bit SP1

  I have seen other people have reported this problem, but I have not found an answer.

  When I copy large files (1 GB +) from one hard disk to another (connected to the same computer), and the destination hard disk is on a port USB3 (also maybe USB2), sometimes the file is damaged somewhere towards the end.  Usually, the copy is fine for 60 to 80% of the length but the rest seems so be given totally random.
  If I copy the file even over and over again between the same two discs, usually, I keep getting corrupted copies (but not in the same place).
  If I copied the files to a different destination drive, usually the problem goes away.
  I tried to use the command COPY to command prompt, same problem.
  I tried putting the drive source on a USB2 port, so the copy goes much slower, still get corruption.
  I ran a test of the RAM for 6 hours with no problems found.
  I tried to run a "Linux" operating system on the same computer with drives connected to the same ports, and copies were all good!  But much more slow (about 30 MB/sec instead of 100 MB/s).
  Because Windows checks the accuracy of copy of file, it would be a big problem, even if it is not reproducible - but since it is "all the time" and "over and over" with the same files, it's all just crazy!
  I have another question strange memory.  I have two 4 GB DRAM sticks in my computer, but the properties shows my memory as:
  "GB 8.00 installed (3.98 GB usable)" and right it says "64-bit operating system" - so why can't we use half of my memory?
  Processor: AMD FX-6100 3.3 GHz not overclocked-card mother ASRock 990FX Extreme 4
  Note that I have no problem with other programs of writing large files on the same hard drive, for example the output of a video editing software has no problem.
  Suggestions?
  Thank you
  -Gary

  I THINK I FOUND THE PROBLEM!

  This is the X - Fast USB program supplied with the motherboard ASROCK.
  If you have X-Fast USB running (and you know), UNINSTALL IT, reboot and this problem may disappear.  So if please contact ASRock and let them know that their program is ruining your life.
  Thank you
  -Gary

• Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager)

  Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager).  I have reset Photoshop like application default for jpg files, rebooted.  Nothing has changed.  The ideas people?

  Hi R_Kelly,

  Hidden folder/file settings was the first place, I checked and kept checking each new reboot.

  I have copied below my temporary solution I posted in another forum thread.

  See point 7.  I found a way to make it visible again.

  1. I can see all jpg files created before Win10 update AND all the jpgs created by other programs, other than Photoshops after Win 10 update.

  2 Photoshop cannot see the newly created Photoshop created jpg files in the file picker at all since Upgrade to Win 10.  I've never had a problem of invisibility of file before winning 10 update.  My hidden files were always checked to be visible.  However, Photoshop can open if listed files in a basic text file search in Windows Explorer in the path of the file "recently used".

  3. the files are not visible or clickable at all in Windows Explorer tree or the Photoshop file selector. They become open and visible when listed in a basic text file search in Windows Explorer in the path of the file "recently used".

  4 Microsoft Office applications can't see the new Photoshop created Jpg files in file, only pre Win 10 update pickers jpg created by other applications and versions.

  5. the problem occurs only with Photoshop jpg created after the Win 10 update.

  6. I checked the settings "Show hidden files, folders and files of the operating system", and they remain as they were, which allows all the hidden to visible objects.  I kept the visibility settings files in this way since the early 1990s.

  Temporary fix below *.

  7. I did yet another simple search of the text Windows Explorer, he finds invisible jpg files less all links 'recently used' who were there yesterday (2nd day after I created the files), I checked the location of file properties file and it entered the original file I saved their.  Using a right-click of the mouse on the file to bring up the menu actions and file properties, I was able to copy and then paste the file into another directory.  I jumped on the directories to see if it remains visible and he (Yes). The new copy is now visible to the pickers of file in Photoshop and Microsoft Office applications.

  LizzyD

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• FTP .txt file copied correctly the cRio

  I use the 'FTP Get File.vi"to retrieve a .txt file of my CRio, which is then copied on my host.  The file is a delimited data tab.  The file copied all the data a except that the copy has a blank line between each set of data.  These additional lines take me to read the incorrect lines when the file is read in my program later with the "reading a spreadsheet file.  These additional lines come  I checked the original on the cRio file transfer via MAX and these lines do not exist.  Can someone tell me how to solve this problem?  Thank you

  If you look at the entries for the File.vi FTP Get, you will notice that there is one that says binary:

  

  By default, this is false, which means that it copies the data in an ASCII format.  Try a real constant of wiring to this entry.  It's the need for VxWorks and Windows use different end of windowing.  This difference is probably the reason that it is adding lines to it.

• my internet is slow I use a box of mifi varisen can someone tell me what to do to make it faster

  my internet is slow I use a box of mifi varisen can someone tell me what to do to make it faster

  Hello

  1. don't you make changes on the computer before the show?
  2. using Internet Explorer or another third party browser on the computer?
  3. have you installed Verizon software on your new machine?
  4. what operating system you are using on the computer?

  
  If you use Internet Explorer on the computer, then you can see the steps in the link and check.

  Why is my Internet connection so slow?
  

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Also check out the link for more information.
  How to increase the speed of navigation: 7 ways to work faster on slow connections
  http://www.Microsoft.com/atwork/remotely/connections.aspx

   

• Warnings from Norton to high utilization of the processor when using Explorer

  Get warnings from Norton to high CPU utilization when you use Explorer 8 on Windows XP SP3 System.

  Hello

  Norton alerts are normally informs you that your use of the PC processor is high by specific program. But what is your purpose to ask here you need to specify that. Face any type of speed computer slow or any other problem?
  If you want to learn more about the treatment of your CPU, you can download process explore http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx by this program you can get a complete idea about the treatment, you can kill the programs that work in silence and you want to close.

• Files copied to external devices (USB/PHONE/CD-ROM) damaged when displayed

  Computer desktop running W7 SP1 with 64-bit system.  Files copied from the desktop to external devices are damaged when displayed.  Files can be JPEGs (photos) and or (e, g. XLS) data files.   Similar files copied from a laptop under W7 Service Pack One with a 32-bit system correctly screen.  Errors occur on the USB ports and CD-ROM drives used to copy the data.  This is potentially a problem of HD or something related to the operating system?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  As you mentioned that the files that you copy from desktop to external devices are damaged when displayed.

  This issue would have occurred due to a virus on your computer.

  I need some information to move forward.

  1. That you get an message\code error when you try to access these files?

  Maybe your computer got infected with a virus.

  So I suggest you view the Microsoft Help article and try the steps to find out if your system has a virus.

  http://Windows.Microsoft.com/en-us/Windows/does-computer-have-virus#1TC=Windows-7

  If you find that your computer has a virus please refer to the link below and follow the steps on how to remove computer virus.

  http://Windows.Microsoft.com/en-us/Windows/how-remove-computer-virus#how-remove-computer-virus=Windows-7

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. Please let us know the status of the updates of your question. We will be happy to help you further.

• File copy operation

  I was wondering how do you file copy operation?

  I have a file in my assets, it s a folder image file, and I want to just copy it into the shared folder, but I can´t to achieve this.

  QFile::copy ("assets:///images/image.jpg", "file:///accounts/1000/shared/camera/image.jpg");

  Should I first?

  Kind of stuck here

  Thank you!

  The prefix of the correct URL is active: / / /, not assets:.

  But QFile is not a class of Cascades and perhaps do not understand this prefix at all.

  Try:
  QString from = QDir::currentPath() + "/ app/native/assets/images/image.jpg";
  QString = QDir::homePath() + '... / shared/camera/image.jpg ';
  QFile::copy (from, to);

  Also access_shared permission must be paid bar - descriptor.xml

  UPD:

  Try logging & values and verify that files with these names actually exist on the device. If the roads are bad, adjust them accordingly. Device Filesystem Navigator in Momentics can be used for this.