SLOW printing now

Similar Questions

• HP Officejet 4355 printer suddenly start very slow printing! HP technician advice needed!

  Hello
  My all-in-one HP Officejet 4355 printer start suddenly feel very very slow! I've had it for 4 years, and God never gave me any problems (maybe minor once, but never really made me mad), as I used it very often at home and at the office. I always buy the HP original ink cartridge (only once, when I wanted to see how works the charging - it's not) and now the last cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page now it will take 10 to 15 minutes. Could someone suggest help?
  Please don't talk about the computer/Windows/USB settings, they all work very well. I unplugged the printer from the PC and don't "align the print cartridge. First step, the printed area, took 10 minutes, second step, part of scanning, does not pass. It says printer cannot allocate the alignment page...
  Moreover, I did look around for answers and found that some people say it's a fault of the ink cartridge. But I used this cartridge for a few months now, it's almost, but not yet finished, it was perfectly up to printing. Impressions during this issue come out OK, 7 out of 10.
  Anyone have any ideas? If I could attract professional assistance of technicians of HP, it would be perfect.
  
  Thank you.

  © RedStarLimitless ©

  Although they still ink cartridge may fail and give the results you see, where the printer made a bandage and wait 10-15 seconds for the next Strip. This is caused by the failure of one of your cartridges.  Remove each cartridge and clean the contacts on the cartridge and printer can solve the problem.

  I don't remember if the Officejet 4355 reserve mode supports, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• LaserJet P3015: Slow printing to HP LaserJet P3015

  Hello

  I have a LaserJet P3015, which has the "question of slow printing. When I sent a job to the printer it takes 2 to 10 minutes to print. I have changed the drivers, added the printer directly on computers instead of the server. Nothing helps.

  Can you please give me some ideas how to solve this problem?

  Hello

  Thank you for your response. The problem is now resolved. It was caused by the printer PCL6 driver. Switching to PCL5 solved the problem.

• HP Officejet 5510xi all-in-one: very slow printing

  My printer takes forever to print a single page.  I got faaster to work at some point, but do not remember how and now it is not printing normally again.

  Welcome to the @Mary6268forums.

  I read your post on the matter of slow printing, you face your Windows 8.1 system when printing to your Officejet 5510xi. I have a few ideas in mind below for you to check and try, and I hope they help!

  1 be able to reset the printer:

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  2. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  3. copy of test. Copies also produce very slow?

  4. print from Notepad. The tests also slowly produce here?

  Let me know the results

• Flashing slow print 6940

  My 6940, about 5 years old, will print one or two quick pages, as he used to do, but now will print multiple pages a Windrow at once, 15 seconds or more long period and then another, so usually I get an error FAILED signal.  No difference if printing several pages of a copy, or a multiple-page document.

  Computer OS is XP

  Slow printing is caused by the failure of one of your cartridges.  In my view, the Deskjet 6940 will print automatically in reserve if mode of ink is removed.  Try the following: remove the black print cartridge and print a sample page of the printer.  It prints at a normal speed (almost)?  If the black cartridge was at fault and should be replaced.  If the printer is still slow replace black cartridge and remove the color cartridge and print the page.  If the printer prints normally now the color cartridge was at fault.

• Slow printing Officejet 6110

  My very old (8 years) 6110 All In One works well until about two days ago. He started very slow printing, about 5-10 min. per page. It prints at the same speed in all modes. It prints slow even on a test in the menu printer page. I read in the forum that a bad print cartridge can cause this problem. When I turned on the printer this evening, there was an error code that says "remove and check print cartridge". I cleaned the contacts on the cartridge, but nothing has changed. I have no spare cartridges to change. I can not clear the error code to try a test page. I tried all the advice I found on the forum, but no luck. Are there other things I can try? A new series of cartridges will cost me about $60.00. I can buy a 6500 new for $80.00, or a 8500 for $110.00. It is better to waste any more time on it, or it's time to replace the old printer?

  Thank you, BFK

  This is caused by the failure of one of your cartridges. I don't remember if the Officejet 6110 print reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  Print you a lot?  The 6500 and 8500 have a reservoir of ink separated and the print head.  They are more suitable for frequent printing.  If you are printing only occasionally the Officejet 6110 can be a better choice because it has less overhead for maintenance.

  If the printer will not print with a removed cartridge then I would replace the cartridge black with a #27, available for $20.  If this does not resolve the problem, you can try the color cartridge #28, on $26.

• Slow printing of http for windows network ports 7

  Windows 7 professional 64-bit, 16 GB of ram, processor 3.4 mhz.

  I read many many posts on this subject.  HOWEVER, I print directly on printers.  HTTP via Cups.  I can load my old XP machine in a virtual machine on windows machine 7 and it prints immediately!  Have already disabled items with netsh int tcp set global chimney = disabled (RSS autotuninglevel thus), bidirectional, coil, firewall, anti-virus, and still the problem persists.

  Since it prints fast the same machine with XP and all other users on the network who are still using XP printed correctly.  I know this is Windows 7.  My printer ports are listed as internet ports. (ie: http://myserver:631/imprimantes/printername))  The system is slow if it prints a Ricoh digital, laser, a laser Epson brother or printers matrix okidata.  So I doubt that it is a driver problem.  Hope I gave enough information.  See you soon

  The answer is:

  Control Panel/internet options/connections/lan settings uncheck automatically detect settings

  http://social.technet.Microsoft.com/forums/Windows/en-us/5d9a3f11-44b2-475e-b89a-0594b73bc221/slow-printing-networked-64-bit-win-7?Forum=w7itproperf&Prof=required

  Katie replied... fixed my problem completely and easily.  Now print in 1 second.

• slow printing and copying

  After replacement of the ink cartridges and install another version of Windows Xp, print and copy the characteristics of my hp f 380 all in one has become very slow, some time does not. I installed the UN and re installed the software of the product several times... no results. I installed the print and scan hp diagnostic utilities, they show that everything is OK. .. What to do

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Slow printing of the Photosmart 2610xi

  My Photosmart 2610xi (6 years) has slowed down considerably at an unacceptable rate. Y at - it a fix for this problem?

  Thank you

  GarrettEdgar

  The most likely cause is a failed cartridge.  The 2610 print (but not copy) with a removed cartridge.  First remove the color cartridge, then print a page of the Notepad.  If the page is printed at a normal speed the color cartridge is the question.  If the printer is still slow then, put the cartridge color back in and remove the black print cartridge and print a page.  If the printer prints now at normal speed then the problem is the black cartridge.  [By the way, don't forget to close the latch on the missing cartridge.]

  Regardless of the cartridge is the question (one still in the printer while it is printing slowly) must be replaced.

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• Slow printing Officejet J3608

  Extremely slow printing recently became a problem with my all-in-one Officejet J3608 printer.

  I have downloaded and run HP Print & Scan doctor. Everything checked out OK. Interestingly, the test page printed quickly and normally, but if I print a page of test or any file word.doc, its performance is very, very slowly.

  I installed Windows 7 and I just downloaded and installed the full driver for this printer package. No change in this situation. I also noticed that if I want to print several copies of a document, 2 copies and the following print quickly in contrast to the first copy!

  No error message. In the window of the printer, it just says: "... Printing" that it prints a single pass, then pauses, then another pass.

  Conducted a system Windows check but found nothing unusual.

  Dear all:

  My slow printing problem has been resolved. Malware object, PUP. Funmoods, has been the culprint. 50 times of this malware have been detected and eliminated by bytes Malware Anti-Malware software downloaded on Download.com.

  After a full of some 300 000 files scane, MBAM has identified the cause of my slow printing.

  This can be useful to other people whose efforts have failed to solve their problems. So, obviously, that there is nothing wrong with the HP Officejet J3608 printer drivers.

  Collis Davis

  Philippines

• HP 8600 slow printing of diagrams and color photos

  I have a desktop HP 8600 printer pro jet and it's very very slow at the color print and diagrams (colored or not). I aligned the printer and clean the print head but it is still slow and I mean slow 2 5 minutes from printing a page.

  I also used the HP scanner/doctor and everything is fine with the printer is brand new.

  Help, please!

  Hello there bamitssam21,

  Welcome to the Forums

  I saw your slow printing problem you are having with your Officejet Pro 8600. I noticed that you have ran a print head cleaning, alignment and print and Scan Dr. indicates no error. There could be several reasons why slow printing occurs, the power of the printer for the program you are printing from (if the problem happens only in a single program) or even the pilot.

  I'll give you some suggestions to try and I hope that we can get rid of this problem!

  First, reset the printer and when you plug it back, just please make sure it is plugged directly into the wall socket. Avoid bars, surge protectors, nothing more.

  This may sound weird, but sometimes it really helps and solves the problem.

  Then, update the printers firmware: get the latest Firmware and product updates

  If the problem persists, follow this guide for printing slow: slow printing

  Good luck! I would like to know how to get you out, and if so, I'll help you gladly further.

  Thank you

• DeskJet 3755: Extremely slow printing, work stuck in the print queue

  Hey, I just bought a HP all-in-one Deskjet 3755 and put it in place and recorded. It is connected to my network, but I'm having a few problems.

  (1) the printer will only print jobs when it is connected to my computer by USB, even if I connected wireless.

  (2) print PDF print jobs EXTREMELY SLOWLY, over a minute for a page of text.

  Please do not just link me to support.hp.com pages... for some reason, they do not load on my computer (see the place completely empty, even if the HP site support work and charges).

  Thank you!!!

  Hey @anb9495,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the slowness of printing for the all-in-one printer Deskjet 3755. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to troubleshoot slow printing with your printer.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DeskJet 1050: Deskjet 1050 slow printing

  Given that I have installed the printer software 1050 10 windows did not have the following problems: when I print a document feeds the paper, the printer then does nothing for a while, then part of prints, prints, stalls, stalls... the document is finished. If I photocopy a document it takes forever to print with it's stop start the effect. Any ideas? Dave

  Hi @Neptuno,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using a printer all-in-one HP Deskjet 1050 with a Windows 10 PC and the printer takes a long time to print or even copy. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  Here is the document of support designed to be used with this type of problem - slow printing.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP psc 2175: very slow printing

  We had Windows 7 installed on our office and our HPpsc2175 printer is marked forever to print anything. I just tried to install the other driver Deskjet 450, and it does make a difference. Any other suggestions?

  Thank you.

  This is caused by the failure of one of your cartridges. I don't remember if the PSC 2175 will print with a removed cartridge, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  If the printer will not print without the two coaches installed, you need to replace the cartridges; I would like to start with black as the most likely to be the cause.