Slow printing of the Photosmart 2610xi

Similar Questions

• Photosmart 385 slow printing from the camera

  I have a Photosmart 385. When printing from the camera, it takes a long time to finish printing. No computer involved, it is used as a stand-alone printer for photographs. Thank you.

  HI Einarrson,

  Looks like the card you are using is having some problems. You have another memory card, you can try?

• Slow printing on HP PhotoSmart C410A

  Hello!

  I have a Mac (OS X - Mountain Lion) and a PC (Windows 7 64-bit) connected witelessly to a printer HP PhotoSmart C410A using an Apple AirPort Extreme router.  Occasionally and this is one of those cases, it takes > 5 minutes to print a single page of the PC and > 10 minutes to print a single page of Mac.  By "simple page", I mean a single line "It's a test page" and sent to the help of all the days/project quality.

  I rebooted all devices, flush all queues and checked my network speed (> 30 Mbit/s), but the impression is sloooow.  Hit the internal http server makes the page very slowly.  It's almost like the pritnter is extremely overloaded or communication between the PC/Mac and the printer is extremely slow.  However, I have no problems connecting to other devices on my network or even go to the internet.  Thoughts?

  Slow printing seems to have resolved itself, but the link you gave me will be useful when you are troubleshooting the next time.  Thank you!!

• OfficeJet 8600 super slow printing on the network

  I have a Mac with os x installed Lion couple and uses the model of N911a of OfficeJect 8600 Pro. I have updated drivers recently so as current sound properly.

  Here are a few vitals:

  OS - 10.7.3

  Router: Apple Time Capsule

  He's averaging about 3 to 4 minutes per print page from any computer in the network. I guess that's not normal. How can I trouble shoot? I've seen messages on the definition of a static IP address that I do not know how.

  What suggestions do you guys?

  I suggest to set a static IP address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• iMac will not print correctly to Photosmart 2610xi

  I am running Snow Leopard and tried to install the original software using the CD for the printer so I can use the scan features. That did not work, so I went and downloaded the latest software suite on the site of HP for Snow Leopard. The printer responds, but the stalls and then prints a line of nonsense, then keeps continuous and ongoing. I have to stop the print job to stop smoking. Other computers on my home network print on the printer fine (Windows machines).

  I also tried the uninstall of the software suite, remove the printer and add it again. Nothing has worked. I get an error when you install the printer on the iMac that some of the software of the printer is missing and it may not work. Available at HP software installation does not solve anything.

  The software from the remnants of left of CD in your system that the standard uninstall program did not remove.  Reinstall the software from the CD, and then remove it with the option "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• HP Officejet Pro 8630: slow printing to the network

  We got this printer about 5 months ago, set up as a network printer and all our workstations print to it very well, that this includes the machines Windows 7 & XP and a laptop computer. We had no problem until very recently, I installed an update that was supposed to be for instant ink program. This makes sure the xp machines could not print to it. I had to reset the printer to uninstall the update and this resovled the question at the beginning, but then he began to print slow - not like taking a lot of time to print a page, but by taking a lot of time between when you hit print and when he actually starts printing.  Yesterday (after all computers have an update of Windows installed) it began to take 30-45 minutes to a draw get to the printer. We currently have the printer connected via usb to one of the desktop and shared with the rest, but this isn't an ideal situation. We have tried to disable our anti-virus (Trend Micro) to see if blocking and it did nothing. You wonder how to do print as before?

  Ironically, the question resolved itself after the second day. Computers and printers are closed every night. Thank you very much for all the links!

• Printing with the photosmart 5510 and MAC 10.7.2 is a dream? and I don't even go to part scanning

  Wauw, buy a photosmart HP 5510 printer and you are very busy for Christmas together to print wireless?

  Unpack your photosmart 5510 and install?

  Well, it prints 1 page and then you get the message printer isn't ready if you want to print your next page.

  1st day, I try with my own knowledge.

  
  

  Updates

  Reset the router.

  Work with difficult IP put in the printer.

  Change the IP address via the Web interface.

  Change the settings of the router

  Try to reinstall the software which is not even possible that most all do the manual says that it is.

  Still 1 print and then nothing. Reset the printer or change the IP in the difficulty of the printer, labour, still 1 print or scan or 1 airprint but then nothing.

  (printed about 35 pages of BS as test)

  Day no. 2, new day of new towers

  Looking around the God thank you forum I'm not the only one who has this problem.

  A lot of people, same problem, some struggle for 6 months, contact support without success.

  Damm scan I even was going to this party and look at all the users having problems. Allow me to first impression please.

  And right now, it looks resolved advice and try to do the same. No results at all.

  Day still no 2, but I can't download now...

  Come on guys read it all, it seems that you are lucky, when it works. You must be a programmer if it works.

  My main question is;

  -Is this or Steve Job knew this?  This product is in its Apple store, HP uses the Apple logo.

  -Sell HP t - he produced cheap now and get the money back to test everything print and use the cartridges?

  -Are there hope or solution let this work smooth with what the box and ads tell?

  -J' just forgot a small no and someone give me the solution?

  -In a lot of wine in these days of Christmas?

  Hope someone can help me and get this Photosmart 5510 working (printing, scanning and airprinting it says on the box)

  Hi ShiomiL,

  A tried these last few months, a lot of time to get the HP works as it should work (especially the airprinting and scan) without any success.  We used with IP printing/scanning, which wasn't a problem, but does not give us the full possibility of the HP printer.

  Today I bought an apple Extreme airport, connect and a few seconds later all works perfect

  In the end, so it was the TL-WR741N (the latter replaced by apple airport) that give problems.

  I just wanted you to know and say thank you for the support you give.

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• Cannot close the menu copy so we can print with the Photosmart C4580

  HP Photosmart C4580 all-in-One

  By mistake, we hit the button settings label number 3.  We do not have memory installed maps.  The instructions say that this:

  Otherwise, this button opens the copy settings menu.  Our problem is that we cannot close this menu so that we can print.

  We followed a hot and cold reset reset procedures without result.  The User Guide does not mention how to close this setting.

  So, we can now use the printer.  Can someone help us please?

  Thank you very much in advance,

  Yours,

  Sky22

  As I mentioned in the first post, I tried the hot and cold nothing works reset procedures.  I finally came to my senses and remove the printer and let windows 7 install the drivers again.  Then it worked.  I should have done that right away.

• Printing with the Photosmart 5514 problem!

  I have a Photosmart 5514 and have just started using it and I probably did something wrong as a beginner and I need help to solve the problem.
  How can I remove printing pending to be executed? I don't know why there is a print job in the queue and when I put in the book, nothing happens.

  Thank you very much

  Jeff

  I'd take a glance on the document below it will show you how to remove jobs from the queue.

  Click here for the document.

  Let me know how it goes.

• Photosmart P6350 will not print, but the computer analysis. Have 'Error' on the print monitor

  The two HP1300 Photosmart inkjet machines and displays the same error message and print, however the Photosmart P6350 scans and copies. Scan indicates the all-in-one is online, but I send a print command and the print monitor responds with 'Error' and no other information. I'm puzzled. I tried all the remedies support hp; same result. iMac OS 10.6.8 recognizes two printers but simply shows them "idle".

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP 8600 slow printing of diagrams and color photos

  I have a desktop HP 8600 printer pro jet and it's very very slow at the color print and diagrams (colored or not). I aligned the printer and clean the print head but it is still slow and I mean slow 2 5 minutes from printing a page.

  I also used the HP scanner/doctor and everything is fine with the printer is brand new.

  Help, please!

  Hello there bamitssam21,

  Welcome to the Forums

  I saw your slow printing problem you are having with your Officejet Pro 8600. I noticed that you have ran a print head cleaning, alignment and print and Scan Dr. indicates no error. There could be several reasons why slow printing occurs, the power of the printer for the program you are printing from (if the problem happens only in a single program) or even the pilot.

  I'll give you some suggestions to try and I hope that we can get rid of this problem!

  First, reset the printer and when you plug it back, just please make sure it is plugged directly into the wall socket. Avoid bars, surge protectors, nothing more.

  This may sound weird, but sometimes it really helps and solves the problem.

  Then, update the printers firmware: get the latest Firmware and product updates

  If the problem persists, follow this guide for printing slow: slow printing

  Good luck! I would like to know how to get you out, and if so, I'll help you gladly further.

  Thank you

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• Printer HP PHOTOSMART 2610xi

  Printer is about 5 years old and work fine with windows XP. The accompanying CD installed DIRECTOR of HP, HP IMAGE ZONE and HP DRIVE'S DOCUMENTS.

  Now, I have a new laptop with Windows 7.  The printer is compatible with Windows 7?

  The original installation CD can work with the new system?

  Do I need a new version of the installation CD and drivers for Windows 7?

  Here is a link to the driver HP Photosmart 2610xi all-in-One Printer to full of features on the HP.com web site.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi