Slow response showing a higher at 1637 on OSX varchar

Similar Questions

• Computer running slow / CPU shows very high %

  Why my laptop run very slow and lagging behind, the CPU show % very high and unstable at all without opening anything. and he delay my departure until the time of the computer.

  the malware scan, that I did it, it detected something, after that I deleted. but the problem still remains the same, sometimes difficult to cause me online also. really terrible. (I'm poor COMPUTER knowledge) ^^. Finally, I have format my computer and using window 7. Want to just thank you to you all who come to suggest me, teach me method to solve this kind of problem.

  and Andre.Ziegler, I n know what you mean. Don understand not at all. Haha, post you can not see. -Sry _-

• many runtime errors and slow responses

  Originla title: what is WiseFixer and is a legitimate program?

  I get a lot of errors of execution and slow responses.  Ran the scan in the wise Fixer but was reluctant to unlock the registry to run the repair.

  Hello

  · When you receive the errors?

  · It is when you work with a program or a particular application?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  · Give us the exact error message that you receive to help us best solve the problems.

  For the problem with the performance of the computer, you can follow the steps in the link below: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• Utilization ratio of page showing very high in Task Manager and computer file crashes

  Original title: the utilization ratio file page showing very high in the Task Manager and the system is to be hanged, please help!

  Hello

  as I mentioned in the title line that we our office gives problem that it begin to become hunged and at this time, when I open the Task Manager to check the status of performance using Page file shows very high up to 1.5 GB.

  Please suggest!

  Thank you

  Brahmaprakash Mishra

  If the swap file itself grows in fact you may suspect a leak memory by an application, it is called a leak 'Paged', usually, notice increased use of pagefile with an increasing slowness of the machine.  As the demand for 'leaks' or consumes more memory Windows pages pages of the RAM in the swap file, where the name, 'Paged' leaking, leaks memory in the paging file.

  The Task Manager is not a very good job of giving you the 'real' swap file usage, to get use accurate, you can analyze the file with the corresponding Perfmon counter or you
  can use PageFileMon from Doug Knox utility: http://www.dougknox.com/xp/utils/xp_pagefilemon.htm

  Open your task manager and click on the view menu and click Select columns...  Put a check mark on the columns paged and Thread Count.  Keep an eye on these columns over a period of time, showing a constantly growing number likely suspicious process Thread.

  You can monitor these counters with Perfmon, that might be useful:
  Using performance monitor to identify a pool leak

  John

• Right-click for slow response

  I recently started to feel a slow response for right click commands, usually they would "hang" for 3 to 6 minutes. I have seen similar posts and followed the instructions with the following results:

  1. started in Mode safe: the first right-click had a delay of 30 seconds, after the reaction was instant
  2. clean Booted: followed all instructions to eliminate stray services, found nothing specific but the right click to answer somehow reduced to 30-40 seconds
  3 Ran SFC: no problems not reported

  Now, the period is reduced to 20-30 seconds, but it is still longer than before.

  This problem started a week ago and gradually got behind more long until he was sometimes 6 minutes or more. I'm stubborn me for the delay. Once the pop-up window opens hit does not remove it, there's still 2 or 3 minutes. During this time the office is "frozen". Inatalling Service Pack 1 did not immediately solve the problem, and I did a full scan with Kaspersky showing no infection.

  ASUS K52F laptop computer with Intel Core i5 processor 2, 67GHz, 4 GB RAM, 64-bit (less than 3 months)

  Hello
   
  You can view the link try the steps and check if this gives you a likely solution.
   
  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/84875a10-663a-40b8-AAC8-87d64473b0b6/
   
  Warning: Microsoft offers no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.
   
   
   
  I hope this helps.
   

• Slow response from the keys

  Hello

  some time after the start of my laptop, I'm starting to get a slow response by pressing and holding a button. Which means that, when I release the key the character continue tp appear about 2 seconds more! So, for example if I use the arrow keys, that I do not in the exact spot I need because the cursor will continue several characters to come.

  I was told to format and reload my os win 7 all over again, is there anyone with a better suggestion?
  Thank you, dror

  Can you please tell us what model of laptop do you have?
  What operating system do you use? Do you use BONES that you got with your laptop?

  Since when you noticed that slow down the issue of the response of the keys?

  When you start the laptop in SafeMode the same thing from happening again?

• Performance of the hard drive, runs at 30% all the time; slow response

  Pavilion Slimline works 30% all the time, slow at times, all the time. Run the Task Manager, identified all of the questions.

  Defragmentation, historical, navigation can be run. Registry cleaner also run.

  Still slow responses,

  Suspect still running games, must stop them, as well as other unnecessary programs.

  Any suggestions, useful, believe, this will solve the problem and improve poor performance.

  Thank you for the comprehensive answer. If the speed is the main problem now, theoretically, upgrading the hard drive would be able to increase the speed up to a point. Of course, this would impact speed of normal programs, programs on the web, etc. I also carefully read the document provided Red Rose, and although it is informative, I don't know about most in this paper has been tried.

  Regarding the age of the laptop, age obviously decreases the computer's full performance, and you have little control over this, unless you buy another computer.

  I have an idea of how research and troubleshooting have achieved you, but it is only an idea. I'll link some documents with information that you may or may not be useful:

  http://Windows.Microsoft.com/en-CA/Windows-8/improve-performance-optimizing-hard-drive

  http://itzkumar.WordPress.com/2010/07/03/10-ways-to-increase-hard-disk-life-and-performance/

  Let me know if you have any other questions, and I'll do my best to help you.

  Mario

• Very slow response OR Executive Panel Test Switch

  Hello

  After you have installed the Developer Suite 2010 we have problems with the Switch Executive Virtual Device Test Panel. The problems has not been seen on old revisions.

  The Test Panel takes about 3 minutes to initialize. This only happens after that MAX was launched and the Test Panel is used the first time.

  In the attached example there is no committed material, the unit is in simulation mode.

  The same slow response happens to TestStand when you try to select the virtual device. Responses of selection after about 6 minutes, means that it takes 6 minutes for a list of all virtual devices available in MAX.

  

  I have attached the report of support of MAX, the configuration of the IVI, the export file SE virtual device and an example of TS.

  Any help on this appreciated problem.

  Thank you

  Matthias

  Hi Eric,.

  After you run the tool to remove the Corruption of database MAX Test Panel now works correctly and as expected.

  Also MAX launches much faster now than before.

  Thank you very much for your quick help and find the right solution.

  Best regards

  Matthias

• Computer slower responses a

  Original title: problems

  I have a PC that has more than 10 years. I have known many and frequent problems for awhile like freeze and extremely slow response time and error messages to something as simple as turning off the computer!  This is more likely to be the consequence of age or some kind of virus or malware, and what I can do about it?

  Give this link to look for a material of great.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• Laptop HP Pavillion DV7 - HDD1 real slow response

  I have a laptop HP DV72185dx of 2.6 years. It has two 500 GB HARD drive. The HDD1 is having very slow response of the week times last 1. I did a HARD drive test in BIOS menu. For HDD1 the quick test stopped at 17% with an error code of 303. Then he went into full test and stopped at 4% with an error code of 305. INTELLIGENT test succeeded. HDD2 passed all three tests OK. Pls advise if it needs a replacement HARD drive. If so, what type of HARD drive me I need to buy. Also is there a program that can ghost HDD1 data to the new drive HARD (I don't want to miss this chance on some software programs that are already installed.

  Note: I have Win 7 Home Premium (64-bit). I guess that my laptop warranty is over.

  Hello

  As you mentioned that the error code 303 said that the hard drive is down on the unit you will need to replace the hard drive. Please replace the hard drive the same capacity & if possible the same company as it will be easy for you if you enable active RAID please go through the below web link.

  What is RAID technology

  Intel® Matrix Storage Manager

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• Windows mail-Slow response to any command

  I use Windows Mail and have experienced incredibly slow response to each order. It loads OK, but always takes for 'Create a message,' 'reply', etc, etc. If I try to "force" the issue by clicking on the window which is actually really difficult to load, I get a "not responding" quickly, but has finally done what I wonder.

  Hello

  Try in a new Windows user account,
  If it works fine, then you can import evrything in it. Srikanth Bidnoorkar, using Vista Ultimate x 86 SP2, Office 2010 x 86-based Quad Q6600 2.4 GHz, 4 GB of RAM, disk HARD 360 x 1 & 320 x 2.

• 2724 slow response time

  One 2724 PowerConnect

  -Managed

  -IP: 192.168.10.42

  -No LAG

  -No VLAN

  From a computer, I can another computer and receive the following: everything is fast.

  Reply from 192.168.10.105: bytes = 32 time<1ms ttl="">

  Reply from 192.168.10.105: bytes = 32 time<1ms ttl="">

  Reply from 192.168.10.105: bytes = 32 time<1ms ttl="">

  Reply from 192.168.10.105: bytes = 32 time<1ms ttl="">

  When I ping the real switch I get the following: slow response.

  Reply from 192.168.10.42: bytes = 32 time = 235ms TTL = 128
  Reply from 192.168.10.42: bytes = 32 time = TTL = 128 374ms
  Reply from 192.168.10.42: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.10.42: bytes = 32 time = 140ms TTL = 128

  Why this delay?  What could be causing it?

  
  

• Someone knows the extremely slow response and delay with "not responding" on more complex web pages after installing updates on Friday?

  Since the installation of 16 Nov received security patches I've known really slow response with Internet Explorer; 2 minutes between web pages on my WIN7 Pro PC and not much better on my VISTA Business PC.  I get expired on complex web pages the context comes up with "program addresses not" or the pop-up at the bottom of the screen asking me to do it again.  The problem is not limited to Internet Explorer, but also prevents Safari to come.   I tried to reinstall WIN7 Pro, but the problem remains.  I'm also not able to run You Tube or other videos.  There is no download or updated or running Belarc Advisor Windows installation problems.  While the problem occurs with Yahoo Mail, it is not an impact send/receive in Outlook.  Does not appear to impact, nothing other than browsing the web.

  Hi ephd,.

  Thanks for posting in Microsoft Communities. The problem description, I understand that the internet works slowly. Provide the following information:

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Internet Explorer is slow? 5 things to try

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  You can see these articles for more information:

  Why is my Internet connection so slow?

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• New machine install, terribly slow response

  I hope someone can shed some light here, I recently built a new NLE for CS5.5 and the thing incredibly slow to load, encode or even responding to an export order.

  A few specs on the new machine:

  Dual Xeon 3.47 GHz 6 core CPU, total 12 hearts, in total 24 logical cores

  Supermicro X8DTL motherboard, intel 5500 chipset

  Registered 24GO RAM in triple channel mode

  Win7 Pro 64 bit with all updates

  Matrox MXO2 capture/playback

  NVIDIA GTX 580 4 GB video card

  Intel LSI MegaRaid SATA raid controller

  Matrix RAID 5 7TB on the RAID card

  Installed software is 5.5 CS suite, Avira anti virus and the Firefox web browser.  In addition, it is a clean installation

  Now for my problems.

  First usually takes about 2 minutes to load from the desktop and is slow to respond after that.  I loaded a second HD 40 consisting of 2 video clips XDCAM HD timeline and a piece of stereo music.  When I export this simple timeline it takes 3 minutes for encoding options to appear, and then once I selected BluRay HD for the screening and the queue, it takes 3 minutes before the launch of Media Encoder.  At the time I write this Media Encoder has been coding for 30 minutes and it is only about 50% done with this second 40 timeline.  For comparison, my old laptop dual core with its unique internal drive takes about 30 seconds to launch the first (CS4 in it's case) and it encodes the same timeline in 4 minutes approximately.

  Something is very wrong here; I hope it is something simple like a bad setting.  The computer itself seems to work very well, and index Windows benchmarks 7.8 outside a C drive slower, to settle at 6.  All material of the project is on the RAID and the programs and the BONES are on the C drive.  Someone at - it ideas?  I'll have to get started on a great project soon and I can't imagine doing on this machine as it is.

  Scott Cooper

  Seehorse video

  Well, I'm getting there with the support of Matrox.  The horribly slow response seems to be largely corrected by disabling the sound surround in the encoder as detailed here:

  "If you find that the switching export format in the export settings dialog box.
  box sometimes takes a lot of time, such that when you switch from Microsoft
  AVI in MPEG2-DVD, rename the SurCodeWrapper.vca file on your system
  (for example, rename the SurCodeWrapper.vca.bak file). This file is
  usually installed by Adobe Premiere Pro in the following folders:
  $ Files\Adobe\Adobe first Pro CS5\MediaIO\codecs\
  $ Files\Adobe\Adobe Media encode CS5\MediaIO\codecs\
  Be aware that after you rename the SurCodeWrapper.vca file, you will not be able
  to export the audio SwCode Dolby Digital, but you will still be able to export
  Audio Dolby. (Ref # 55279 and Adobe Ref # 2603943) ».

  Fortunately, I didn't need a surround sound, I'm not really thrilled to have to eliminate option however.  I still have a few other questions; I hope that I will get to the bottom of them as well.  Oh, I found MAJOR problems with the latest Nvidia drivers, causing a complete corruption of the video screens.  Roll back to version 280.26 solved these problems.

• Slow response from the DPM Touch Interactive applications

  Hello

  In our premises of the Subscriber, we deployed a solution we have developed as a tactile interactive application using a 3rd party Content Management System. The content of the application is pushed to the DPM and stored locally. This app is more graphic, and there is no video no is involved. The size of the content is aroun 105MO. We use 3 m touchscreen.

  The application is designed so that when the user clicks on tabs, it goes to that specific tab content. The question here is, when the user clicks/keys on the screen of the tab, it takes more time to react, which means it takes longer to access this particular screen. So I'm not sure how reduce response time.

  We use Cisco (OEMed) 32 inch screen with a resolution in 1366 x 768 LCD, what is said in the native resolution. We use the HDMI to connect to the DPM on the LCD screen.

  Please let me know how to increase the speed of the interactive application.

  JK,

  
  

  The first thing to do is to reduce the question of time 'response' to a

  the driver for 3 m touch OR the application itself.

  
  

  You can use another touch application (1 or more) for a reference

  on the response of the tactile response.  If all the applications meet

  the touch with the same delay so the problem "may" be with the

  3 m touch driver and may need some improvement and refinement.

  If the other touch applications are faster to respond then your App "Touch".

  at issue, the US is facing an application problem.

  
  

  Is a common symptom seen with performance and custom applications

  because developers create applications and workstations with high

  fast video cards and processors.  Therefore, what is acceptable

  performance on the workstation does not to the slower

  DMP.

  
  

  Please indicate the MIB of STATUS output in a text file and

  Download it here for review.

  
  

  Thank you

  
  

  T.