Receive "Error 2908 - could not save component" when trying to update software MYOB
Im trying to install an update of MYOB & get "ERROR 2908 - could not register component ' how can I get rid of this?
Hello
· Are you having a delivers install any other software or will only occur when you install the updates of the software?
Method 1: To clean boot your computer, and then try to update the program to check if any third-party application is causing the problem.
Follow the steps below to provide the article to perform the clean boot. http://support.Microsoft.com/kb/929135
Note: Make sure to restart the computer to normal startup followed step 7 in the link.
Method 2: Reregister the Windows engine install and then try to update the software and check if the problem persists.
(a) click Start, type run in the search box and then press ENTER, type msiexec / unregister in the Open box and then click OK.
(b) click Start, type run in the start search box and then press ENTER, type msiexec/regserver in the Open box, and then click OK.
(c) restart your computer.
I also suggest you to contact MYOB support about the issue.
http://MYOB.com.au/accounting-practices/accounting---contact-us-1258090827812#
Tags: Windows
Similar Questions
-
Error 2908 could not register component what update
When I try Acrobat Reader 10.1.0 update completed with Error 2908 "could not save the component. Update failed.
Can you please which OS (Win 7/8 8.1 10-32 or 64-bit) do you use?
Kind regards
DOUGLAS
-
When you try to connect to windows live messenger, I have error message a new version of messenger is available for download. When I select Yes, wat happens in it will not download new version of windows live messenger but it says could not close the programs. Please help me again
Hello
Method 1.
Here's how you can solve this problem:a. download the latest version of Windows Live Messenger available onhttp://explore.live.com/windows-live-Messenger-XP
b. update of Windows XP through Windows Update.
c. go to "C:\Program Files\Windows Live" and remove the 'Messenger' folder (Note: replace 'C' with your root drive letter)
d. go to "C:\programdata" (Note: replace 'C' with your root drive letter) and remove Windows Live install and WLInstaller, if you have a
e. restart the PC.
f. run the installation program that you downloaded.
Method 2.
If the problem persists I recommend you ask your question on the dedicated Windows Live forums.Here is the link to the Windows Live Messenger category.
http://windowslivehelp.com/forums.aspx?ProductID=2I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Error "Installation package could not be opened" when tried to install Age of Empires 3
Original title: installation package could not be opened
Due to problems with Age of Empires 1, 2 and 3, I recently uninstalled using Advanced Uninstaller. I then reinstalled AOE 1 and 2 but when I tried to install AOE 3 I got the message "the installation package could not be opened. Verify that the package exists and that you can access it. \Age of Empires III.msi"
I assumed that the installation disc (which must be loaded when reading) was struck and he was polite. The warning message still appears. I'm afraid I might have deleted something that I should not have when you uninstall the game. Any suggestions?
Hi kafka001,Try these steps and check the result.
Step 1: Copy the game on the hard drive and install the game as administratora. copy the contents of the CD game on a new foler hard disk.
b. right-click on the game configuration file and click "Run as Administrator"
c. follow the instructions in the wizard to install the game successfully.Step 2: Delete the contents of the temporary folder in Windows
a. Click Start, type % temp % in the start search box and press ENTER.
b. in the Organize menu, click Select all.
c. in the Organize menu, click on delete.
d. click Yes.Step 3: If the problem persists, try to install the game in a different folder or to a different drive
a. start game installation.
Note: Do not click on quick installation during installation.
b. follow the setting menus until you see the button change.
c. click on change.
d. in the path box, delete the existing path, and then type the following text:
: \Program Files\Microsoft Games\game name
In this example,is the drive letter of the hard disk and the name of the game is the name of the game you are trying to install.
e. click OK when finished.
f. follow the instructions that appear on the screen to install the game.For more troubleshooting, see this articleVisit our Microsoft answers feedback Forum and let us know what you think. -
I tried to watch netflix, says:
You have encountered a problem specific to Silverlight from Microsoft, the software used to watch movies on the site Web of Netflix. This problem is often solved by uninstalling and then reinstalling Microsoft Silverlight on your computer.
To uninstall Microsoft Silverlight on your Windows computer, please follow these steps:
- Close the open windows of the browser
- Click the Start button.
- Select the control panel.
- In Windows XP, select Add / Remove programs. In Windows Vista/Windows 7, select programs & features.
- Find and click on Microsoft Silverlight
- Choose Remove in Windows XP or uninstall under Windows Vista/Windows 7.
When I try to romove in Add / Remove, I get:
This patch package could not be opened. Check the fix package exsists... ect
I also tried to use the program "Microsoft fix it."
Help!
Hi Mikeiz,-Can uninstall you other applications without any problem?I recommend you follow the steps listed in the link given below to uninstall Silverlight successfully:If this is not enough, post your request in the Silverlight Forums for assistance. -
Error: The product not valid key when trying to activate Windows XP.
Original title: XP OEM.
OK (I try to keep my sense of humor) that I bought a card motherboard and CPU to upgrade a machine, and because I'm HONEST, bought an XP Pro OEM software, it was sealed, and I can't believe someone go threw worth of counterfeit lable, manual and sealed packaging with a holographic disc of Microsoft for $ 50. Now, if this is a ploy to make us go to 7... also we do not she, if oem cannot be sold please inform so that I can tell the community. Windows XP Professional...
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid product key
Validation code: 8
Code of Validation caching: n/a
Windows product key: *-* - V89BB - FRPGP-JC9FB
Windows product key hash: CyRUKT9nfB324 + 7HojC + ByouLMs =
Windows product ID: 76487-011-1505962-22412
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 5.1.2600.2.00010100.3.0.pro
ID: {29A3FE17-002A-4EAE-9541-02C727837A2B} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed by: Microsoft
Product name: n/a
Architecture: n/a
Build lab: N/A
TTS error: n/a
Validation Diagnostic: 025D1FF3-230-1
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a
Version: n/aWindows XP Notifications data-->
Cached result: 8
File: Yes
Version: 1.9.40.0
WgaTray.exe signed by: Microsoft
WgaLogon.dll signed by: MicrosoftOGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{29A3FE17-002A-4EAE-9541-02C727837A2B} 1.9.0027.0 5.1.2600.2.00010100.3.0.pro x 32 *-*-*-*-JC9FB 76487-011-1505962-22412 5 S-1-5-21-1078081533-682003330-1417001333 Compaq DSDT Compaq v2.14 686O2 20020815000000.000000 + 000B498324F01842062 0409 0409 Central Standard Time(GMT-06:00) 0 3 109 License data-->
N/AWindows Activation Technologies-->
N/A--> HWID data
N/AActivation 1.0 data OEM-->
BIOS string matches: Yes
Marker of the BIOS string: 674A: Compaq Computer Corporation | 10EA9:Compaq Computer Corporation | 1FFEA:Compaq Computer Corporation | 1FFEA:Hewlett - Packard Company
Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005Activation 2.0 data OEM-->
N/AIf it is a counterfeit, or has already been issued before April 2012 please let me know. If there is a problem with the purchase of an OEM software with updates also let me know, so I can inform the masses.
OK guys, I'm all set, my sense of humor is back :) It took MS technical support some time (which made me feel less stupid) and they had to make a new key. It seems that when changes are made to certain machines that I upgraded was a Compaq Evo bios conflict there, it seems to be more prevalent in the 2002 version of XP Pro OEM.
Microsoft taken care of once I found the right number to call, so everything is good again. Thanks for your replies.
-
Could not save to the database. MODE = UPGRADE error
Hello world
I get the following error when you try to save a custom database wft file
1602: cannot save.
1400: can not save to the database. MODE = UPGRADE EFFDATE = 2009-09-15 08:58:07
1404: Please first loading this entity or check protect and customize the level of ITEM_TYPE 'XXXXPT '.
We use the following:
WF = 2.6.3.5 generator
Version of WF = 2.6.0 (based on select text of the wf_resources where name = "WF_VERSION")
Oracle Apps 11.5.10
Oracle DB 10.1.0.4.0
I tried to set the access level to zero (0), but the same error appeared.
I use the correct version of the constructor?
I appreciate if you can give help and ideas on that.
Thank you
ElmerPL see if MOS Doc 272897.1 (' error 1602 ': can not save "occurs when trying to save Supptest26 in Workflow Builder) can help
HTH
Srini -
Just got a LifeCam Cinema.
Installed the drivers-software, plugged the cam, noticed drivers installed.
Tested by opening the installed LifeCam software. Describes the options to take photo, audio or video. "Or the other option does appear immediately the error" LifeCam could not save your, photo, audio clip or video clip.Shows Device Manager is installed correctly.
Swapping the same USB ports it shows in the software, no device detected, a driver is re-installed during the exchange of the ports, it comes up with the 3 options mentioned before and again the same error message.Have also tried Google chat and shows no video, but gives the possibility to do video chats.
System: Windows 7 64-bit.
I have full admin rights on the system...Christophe ideas?
Hello Striff,
If the camera is not detected, it seems to me that the drivers are not installed for the device works, I suggest you reinstall the Lifecam drivers and check if you have the same problem.
I suggest that you try different methods listed in the following article to resolve this problem:
Troubleshoot failures to find the new LifeCam hardware:
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
I get error 2378 could not access VBScript Runtime for custom action, when I try to install the software and uninstalling some software.
I tried several online for regsvr32 vbscript.dll fixes and nothing has helped.
I tried to remove the keys from HKCU\Software\Wow6432Node and it is said that they do not exist.
I have registered the VBScript engine in the folder it is installed, said successful but still does not work.
I tried with run as administrator of the command-line also.
It is a Dell laptop with Windows 7 Home Premium 64 - bit.
Any suggestion would be appreciated.
Thank you
Oldestman
Hello
What operating system is installed on your computer?
Method 1: This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation. I suggest to try the steps below and check if the problem is resolved. If you have already tried these steps then we do know.
Delete the registry following key then save the VBScript code and check if that helps:
Step 1: If you have a 64-bit operating system, you must follow these steps:
a. Click Start and type cmd in the box start the search.
b. right click on cmd in the list programs, and then click Run as administrator.
c. at the command prompt, type the following command and press ENTER:
reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8}" / f
If you have a 32-bit operating system, you must follow these steps:
a. Click Start and type cmd in the box start the search.
b. right click on cmd in the list programs, and then click Run as administrator.
c. at the command prompt, type the following command and press ENTER:
Reg delete "HKCU\SOFTWARE\Classes\CLSID\" /f {B54F3741-5B07-11CF-A4B0-00AA004A55E8}
Step 2: Register VBScript by following the steps below:
a. Click Start and type cmd in the box start the search.
b. right click on cmd in the list programs, and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
c. at the command prompt, type the following command and press ENTER:
If you are using32 bit version of Windows, and then run the following command:
regsvr32 vbscript.dll
If you are using64 bit version of Windows, and then run the following commands:
%windir%\syswow64 CD
regsvr32 vbscript.dll
d. after the command is executed successfully, try to install
Method 2: Diagnose and correct program installation and uninstallation of the problems automatically
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
-
I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH
What is your operating system and Service Pack?
What is your anti-malware?
-
Original title: cannot install Itunes because of (Error 1606 could not access network location %AppData%).
Please can someone help me?Hello
This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.
The steps to correct this problem involve editing the Windows registry.
WARNING: This method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the
Register incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.
Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:http://windows.microsoft.com/en-US/windows7/Back-up-the-registryMethod 1:
a. Click Start and typeregedit into the search box start and press to enter.
b. find the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
c. remove the entries that show the path that is listed in the error message.
Method 2:Run Fixit from article mentioned below. It can fox the most problems with Error 1606.
http://support.Microsoft.com/kb/886549Kind regards
Afzal Taher-Microsoft Support.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Original title: Error Messages
Try to uninstall a program ("Itunes" or "Adobe Reader"). After I received a message: "Error 1606" could not access network location % APPADATA%\. What can I do? I can not uninstall and reinstall them.
Try this FixIt:
http://support.Microsoft.com/kb/2258121
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
original title: problems of Windows update/upgrade
I'm currently trying to install Windows 7 on my desktop running Vista.
Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.I already put the virtual disk on auto and rebooted several times. I get the same error.Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.gain, I restarted and it still does not work.I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).Help!
First, run Windows 7 upgrade advisor:
Windows 7 Upgrade Advisor
http://Windows.Microsoft.com/UpgradeAdvisorNote the results and make sure to follow the steps.
Try to install Windows 7 using the USB
Install Windows 7 with a USB memory key
http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key -
HP Photosmart Premium C410b: could not save the scanned images
I use the HP Scan application and the error message: -.
Could not save the scanned images
appears when you try to save in a folder as a PDF or any other format.
Ironically, if I'm going by sending to the printer and then save to PDF it works!
I checked and I'm using 4.2.2 with El Capitan HP driver software
Any thoughts?
Hello
The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.
In the Hewlett-Packard folder move HP Scan to the trash and empty it.
Before you install and use the HP Easy Scan application below which should save the files correctly:
https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12
Kind regards
Shlomi
-
Error 1006 could not access network location % public % of office
whenever I try to install vmware-player it gives me this anwser & other programs as well
Take a look at the position of jwittenmyer on August 24, 2011 for the best answer to this problem.
VMware Tools installation fails with the Error 1606
http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1011717With Error 1606 and if you're worried about XP or Windows 7 patches, if not apply to Vista (they often do), take a look at these positions.
Then take a look at these.
66 Error 1606. Location of access network
http://www.kellys-Korner-XP.com/xp_tweaks.htmHow to fix Error 1606 during installation of Adobe Acrobat
http://www.gilsmethod.com/fix_error_1606_acrobathttp://forums.CNET.com/5208-6121_102-0.html?forumid=45&ThreadId=104829&MessageID=1200965
You receive an "Error 1606" error message when you try to install or remove a program from Microsoft
http://support.Microsoft.com/default.aspx/KB/886549#appliesToResolve the Error 1606: could not access network location
http://rajputyh.blogspot.com/2009/12/solve-Error-1606-could-not-access.html
Maybe you are looking for
-
Still not found the keyboard shortcut to move the logic mixer sliders?
I looked through the keyboard shortcuts and on You Tube, maybe I'm missing something! Y at - it a keyboard shortcut to move the sliders? without using the mouse
-
6s battery replacement? Apple says that my phone is fine.
How to plan a replacement battery for my iPhone 6 s? Apple refuses to replace the phone, but he continues to stop at 20 - ish %. Today it stop at 33% while listening to headphones with the screen off. I have power + function reset the phone, he tu
-
L500 is slow and freezes or takes forever to respond, the Streaming is quite a problem, takes long to buffer
-
Driver problem Windows 10 LAN ASPIRE 5750 G
Hello I'm having some trouble finding a compatible driver LAN for my aspire 5750G on windows 10. While it is connected with a LAN cable, the first time I start up my laptop, or after restarting the adapter, internet works. It gives me an IP address a
-
Cannot download updates for windows 7
Tried to restart the computer. Running cost compensation for 30 minutes.tried just updated to 2 updates from windows update. Help, please