Slow start... That's happened?

I have Windows 7 64 bit Pro.  My computer has been very stable and free of errors.  December 14, I did all the updates of windows and also installed Microsoft Silverlight.  Everything was a success and the computer continues to run correctly.  Two days later, I turned on the computer and it took 5 minutes to start ('Starting Windows' screen)!  This has never happened before and normal bootups takes less than a minute.  At the start of 5 minutes, the hard drive was active all the time!  After startup, the computer has been sluggish for a few minutes and moved out.  I looked at event viewer and found no errors or warnings.  The usual information events were all the same as for bootups in good health except for longer time periods between events.  I shut down the computer that took 45 seconds instead of the usual 15 seconds.  Everything has been normal since then.  I use Microsoft Security Essentials and made tests before and after the incident and found nothing.  Does anyone have an idea what may have caused this?  I should do or just ignore it since its working fine now?

Thank you.

I'm just following the previous post to report that the problem has been found and corrected.  In addition to the slow start that has occurred only a handful of times, the computer also showed freeze times events, about one per day on average.  These gels would last from 10 seconds to a few minutes in length.  During a freeze, the mouse will work fine but the computer does not respond to the clicks of the mouse, opening or closing an application or just about anything else.  As the hard drive light was sur-solide during a frost event but the process explore not detected no disk activity.  Without errors or warnings never appeared in the event viewer and extended hard drive test showed no problems.  However, I was always suspicious of the hard drive.  I photographed the drive and restored the image on a new hard drive and the problem was gone for good.  The only thing that has changed is the hard drive itself.  Any software problem would travel with the image, so I conclude that the culprit was the hard disk hardware.  In any case, I am happy that the problem is solved!  I hope that this monitoring will help someone else.

Tags: Windows

Similar Questions

  • C:\Windows\SysWow64\CScript.exe appears whenever my computer starts. Is there a way to prevent that from happening?

    C:\Windows\SysWow64\CScript.exe appears whenever my computer starts. Is there a way to prevent that from happening?

    M. Shivkumar, I also encountered this problem, and after following the instructions given by Linney, I've isolated the problem to the boot service "CheckNDISPort", which was linked to the MTS MBlaze program on my computer. It is not a virus, nothing to worry about. You can stop this from happening by disabling the boot service called 'CheckNDISPort' in the tab, start the System Configuration utility. It is not to damage your computer if you keep it checked.

  • Slow start. Error message at startup that says: c:\users\user\AppData\Roaming\adobe\sp. DLL

    Very slow start.  Does not load favorites. Internet does not not & c:\users\user\AppData\Roaming\adobe\sp error message. DLL

    The specified module could not be found.  Please notify.

    Hello

     
    1. All changes made to the computer before the show?
    2. What is the message you get from the Internet does not?
    3. What is a wired or wireless network?
    4. Are you referring to Favorites in Internet Explorer? What happens when you try to load a?
     
    Try the methods provided and check.
     
    Method 1:
    Step 1:
    Start the computer in Safe with networking and check if any problems persist, check especially startup and Internet connectivity. Check out the link and follow the steps.
    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
     
    Step 2:
    If the problems do not occur in safe mode, and then perform a clean boot. Check out the link and follow the steps.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
     
    Method 2:
    Check out the link and follow the steps. Check if the computer starts always slow.
    Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2
    http://support.Microsoft.com/kb/977419
     
    Method 3:
    To solve the network problem. Check the link and try the troubleshooting steps.
    You can also check out this link and try the steps.
    Optimize Windows 7 for better performance
    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
  • That's happened.  I allowed my PSCC update last night.  I opened the program this morning to make a few changes and my work space is gone.  My preferences are gone.  Instead to start my work, I need to spend time reorganizing.  A PAIN!

    That's happened.  I allowed my PSCC update last night.  I opened the program this morning to make a few changes and my work space is gone.  My preferences are gone.  Instead to start my work, I need to spend time reorganizing.  A PAIN!

    It's always a good idea to save and provide for system backups. All you have to do is pick up your Photoshop preferences. Don't copy a folder no big deal.

  • When I use dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

    When I use Dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

    Are you spotted with temporary files?  In Edition > Preferences > Preview in browser.

    Nancy O.

  • I turned on my computer and everything was gone, even the start menu is empty. It is not let me do a system restore. That's happened? How should I do?

    It is not let me do a system restore. That's happened? How should I do?

    Use the safe mode system restore or create a new admin user account

  • Firefox has slow start up & I have the latest version. IE, Chrome, AOL will begin immediately. Firefox takes up to 10 minutes.

    Firefox has slow start up & I have the latest version. IE, Chrome, AOL will begin immediately. Firefox takes up to 10 minutes.

    This has happened

    Each time Firefox opened

    == update to 3.6

    You may need to use questions Troubleshoot Firefox in Safe Mode (click on "Safe Mode" and reading) to locate the problem. Firefox Safe mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, place you in the DEFAULT theme: Tools > Modules > Themes before start Safe Mode. When you enter Safe Mode, do not check all the items in the window, just click "continue mode without failure." A test to see if the problem you are experiencing is fixed.

    See:
    Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
    Solve problems with plugins like Flash or Java to solve the common problems of Firefox
    Troubleshoot and diagnose problems in Firefox

    If the problem does not occur in mode without failure, then disable all your Extensions and Plug-ins, and then try to find out who is causing by allowing both the problem reappears. You MUST close and restart Firefox after EACH change via file > restart Firefox (on Mac: Firefox > Quit). You can use 'Disable all add-ons' on the start safe mode window.

  • Satellite L550 - system slow start

    Hi people!

    Got a new Satellite L550 running Vista 32 - bit, everything seems fine except for a few things on this machine that goes like this:

    1 system restore is one hell of a long process I have ever met so far-time is gasoline and 17 GB of restore disks its really a whopper!
    2. If you have any trouble with the 'text leap' (when entering) so I have. Sound the Alps Touchpad I found must be configured (by disabling the tapping) that's if you can find the tab 'Advanced' in the properties of the mouse
    3. I tweaked my startup programs, but this machine, of course, happens to a slow start. Any help here

    Otherwise a pleasure to have abandoned another manufacturing in favor of elegant, intelligent Toshiba laptop and hopes that its evidence switch!

    Hello

    I had a problem of cursor jump as well, but that was my mistake... I touched the touchpad accidentally during typing...
    I could solve this problem by disabling the touch pad using the FN + F9 key combination.

    PS; You have the latest version of the BIOS? Isn't it? Then update.

  • improve system performance slow slow start

    I have a HP Netbook, Mini210 - 1018CL
    I can, t activate the account Windows Firewall assumes that because he, s not active administrator.
    Account main is fine, the firewall is turned on

    Hello

    1. which version of the Windows operating system is installed on your computer?

    2. what happens when you try to turn on the firewall?

    3. do you get an error message?

    4 Aare you the administrator of the computer?

    5 are you facing performance issues or slow start up when starting up?

    If you are the administrator, you must grant the appropriate permissions to make the changes. You can make changes only in being logged on as administrator.

    I suggest you to go through the steps mentioned in the link and the Coachman.

    What are user account control settings?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-user-account-control-settings

    See also:

    Firewall: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

    Performance and maintenance

    http://Windows.Microsoft.com/en-us/Windows7/help/performance-maintenance

    http://www.Microsoft.com/athome/Setup/optimize.aspx

    http://support.Microsoft.com/mats/slow_windows_performance/en-us

    These links are applicable for Windows Vista and Windows 7.

  • Outlook express-all inbox message just disappeared without deleting me anything, and I only put clean Inbox. That's happened?

    I was checking email as I always did in outlook express, I hit send and receive, and all of a sudden, everything in my Inbox was gone... more than 1,500 messages.

    I did not clean up messages or anything like that automatically remove.

    There was no progress bar for deletion and deleted items were not in the trash.   they have simply disappeared.

    That's happened?  How can I stop this from happening?

    That's happened?  How can I stop this from happening?

     
    See further down on prevention.
     
    Firstly: in mode | Current view, is to show all Messages checked? If Yes, read on.
     
    Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
     
    Why OE insists on compacting folders when I close it? :
    http://www.insideoe.com/FAQs/why.htm#compact
     
    Why mail disappears:
    http://www.insideoe.com/problems/bugs.htm#mailgone
     
    Recovery methods:
     
    If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
     
    To restore a folder bak on the message store folder, first find the location of the message store.
     
    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
     
    In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
     
    Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
     
    Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
     
    First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
     
    If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
     
    If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
     
    If you have not then bak copies of your dbx files in the Recycle Bin:
     
    DBXpress run in extract disc Mode is the best chance to recover messages:
    http://www.oehelp.com/DBXpress/default.aspx
     
    And see:

    http://www.oehelp.com/OETips.aspx#4
     
    A general warning to help avoid this in the future:
     
    Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
     
    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:

    http://www.oehelp.com/OETips.aspx#3 
     
    And backup often.
     
    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx  
  • Slow start, stop, ~ does not etc. Help!

    I'll try and be as organized as possible.  If you think you know something that could help please let me know.  I really need my computer is working again!

    Problem:

    For probably 9/26 my computer worked do everything very slowly.  It's strange to me because it happened all of a sudden and it's generally pretty fast.  I called Toshiba and see what they could do, they just said to do a system restore which has worked for a day and then he returned to its slowness.  It works all programs slowly, everything loads slowly, often Microsoftword said it does not respond as well as internet Explorer.  My internet has been fast is now has slowed down a bit...

    My Info to the computer:

    Toshiba Satellite L305D
    3.00 GB RAM
    80% free space in memory
    Windows Vista Edition Home Premium
    Almost 1 year.

    If you need me to tell you anything about it or just ask.  I would really like to find a solution to this.

    What's new

    Good, then, a classmate and I have discussed the issue and I told them I don't think it was malware because I have two installed anti-virus software.  McFee and trend.  They told me that it is bad to have 2 because apparently, the programs will be fight between them?  So I uninstalled McFee, for now and simply tend.  Which fixed the problem immediately.  Now my computer works normally.

    Another friend is always worried that it might be a virus?  Any suggestions?  My programs pick up nothing, so not sure?

    Go to control panel > Performance information > advanced tools (left column). If you look up a few lines under performance issues, this will tell you if Windows knows what is causing slow starts and stops. If there's nothing there, you most likely have been affected by malicious software...

    Run these:

    Malwarebytes - http://malwarebytes.org

    SuperAntispyware - http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html

    They could get somewhere...

    Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

  • Windows 7 64-bit slow start of blue circle hangs on the network icon in the notification area. Some programs don't load until the problem resolves. stuck at the screen of welcome for 5-10 minutes sometimes.

    Hello world.

    It will be long and windy.

    I have a problem with my ASUS G50VT - X 5.

    im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

    • Slow start.
    • Network at startup initialization problem.
    • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
    • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. adjustment of splendid colors, services, programs of control really like network connections and things like that but some i can still run.
    • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
    • Some programs won't load if started up that the problem is solved. for example, microsoft outlook and other things.

    Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

    I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

    • has run msconfig to see if it is one of the start up programs or services is causing the problem. found nothing.
    • run the cmd command, I think that the chkdsk. It digitizes and restores the registers according to me. did not help
    • Used norton. then corrected all the errors found and the questions. did not help.
    • Ran startup recovery tool to fix problems at the beginning. did not help.
    • Booted up my laptop in SafeMode with network. Works very well

    Also, the problem started not with win 7 install I had it on my laptop well before the problem.

    im running Windows 7 Professional 64-bit. as if lately, about a week ago my laptop started to start, slow down and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also sometimes on occasion I will be stuck to the homescreen for 7-10 minutes.  also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away as internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a bit more resources. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

    Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

    If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

    Thanks in advance.

    I also looked in the event viewer and noticed these problems...
    The winlogon notification subscriber took 916 second (s) to handle the notification event (Logon).
    -
    -
    6006
    0
    3
    0
    0
    0 x 80000000000000
    56201
    Application
    Collin-PC

    -
    TermSrv
    916
    Opening of session
    02000000

    and it was lower than...
    Bucket of error, type 0
    Name of the event: ServiceHang
    Answer: No available
    Cabin ID: 0
    Signature of the problem:
    P1: LanmanServer
    P2: srvsvc.dll
    P3: 6.1.7601.17514
    P4: 20
    P5: 2
    P6:
    P7:
    P8:
    P9:
    P10:
    Attached files:
    C:\Windows\Temp\WERBC1D.tmp.WERInternalMetadata.XML
    C:\Windows\Temp\WERBC1E.tmp.HDMP
    C:\Windows\Temp\WERCBA9.tmp.mdmp
    These files are available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppHang_LanmanServer_958bb07ee47f1d58779ce0fb489791f2b7187bdb_cab_0de8cef2
    Symbol of the analysis:
    Recheck for solution: 0
    Report ID: 0de8cd67-d5a8-11e0-a8a7-9ab1f0009500
    Display state: 6
    and below that,.,.
    The winlogon notification subscriber takes a long time to handle the notification event (Logon).

    Hello

    1. Since when are you facing this problem?

    2 have you made changes on the computer before this problem?

    3. do you get any error code or error message while starting?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    If you have not tried the steps in the following Microsoft article, then try to clean boot and check if it helps.

    How to solve the problem by running the clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

    Method 2:

    Step 1:

    If the problem persists, you can create a new user account and check what is happening. To create a new user account

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    Step 2:

    If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Hope the information is useful.

  • Very slow start, Services could not be started

    Hello

    I use Windows 7 Ultimate on my Vaio computer
    A few days ago, I experienced a very new problem for me, which is:
    -Start up Windows very slowly (welcome screen minutes...)
    -When I get home from office, it shows that windows could not connect to the "Event Notification Service"
    (- When I started to use the services of the window (click on desktop, taskbar, using network, or 'service' to enable the notification of event services...), I feel very slow loading, then hang up for minutes)
    -View event log services also could not start, so I couldn't see what happened. After you enable this service, I restart my laptop and same thing happens again
    -After it started to slow down, things worked normally (Internet explorer, other programs...)
    I did the things so far:
    -C' happened all of a sudden, I don't update or installed new programs
    -J' I have try start-up repair, could not find any problem
    -J' have disk check, nothing wrong...
    -Tried in safe mode, same thing
    Hoping to find a solution for this because this is my second post here, my previous post about blue screen due to USB_DRIVER... stuff has not been resolved, and I had to live with it.
    Thank you

    Dear Sir.

    I tried to follow your instructions and it worked.
    However, I had other problems and I tried to google out them, but I found solutions did not work for me.
    So what I did, I did an 'upgrade' to replace the files on my system.
    Problems with the services of the event disappeared, windows starts a little slowly, but the previous problems that I reported here are gone.
    then I found another problem with my office 2013 after I did the upgrade. Tried Google on solutions and still can't solve.
    I need office to work and I had to do a new reinstall my windows, so things are back to normal.
    I still think that my drive has problem, as about 2 months ago, I had the same problem (slow start), I have reinstall my windows, and then recently, it happens again.
    So I will wait to see this time, if the problem persists, I'll do disk check and allow you to see the report and hope that you could point to if my drive gone bad.
    Thank you very much
  • iMac slow start was fast

    My iMac, with 1 disk of merger to, was very quick to open the OS since multinational April 2015, then suddenly became very very slow to open recently.  For example the Apple logo appears in a few seconds and the load in a few seconds more.  Now the Apple logo minutes to load.

    Latest version of the OS is 10.10.5.  It's 3.1 GHz Intel Core I7 processor.  The memory is 16 GB 1600 MHz DDR3.

    No idea why the slow start happening?  Any suggestion would be appreciated.

    Thanks for posting a report http://etrecheck.com/ EtreCheck

  • Satellite X 200 - 25i - slow start on

    Hello

    This cute portable X 200 - 25i and everything you've just bought a few weeks ago works great. But I just realised, it this slow start. It will take about 3 minutes to load all the software, and I did install something special... everything is factory shipped Vista, antivirus software for my mouse logitech...

    I also replaced a disk, what WD 320, and the first with the OS is the original...

    Any help? Any ideas?

    Thank you all very much...

    Hello

    My notebook booted up like a turtle. Do you know why?
    Because many applications have been installed in the autostart folder or in the registry, run entry and this affected the start-up procedure.
    I had Norton Antivirus installed and loaded always at the beginning.

    I read that this software needs of too many resources and slows down the performance of the laptops.
    I removed and instead of Norton, I use another program called Antivir antivirus.
    It s freeware and my notebooks starts much faster than with preinstalled Symantec Norton Antivirus.

    I recommend also using a small tool called CCleaner.
    It repairs the registry of the operating system and remove all garbage and junk of the system.
    It s really nice

    See you soon

Maybe you are looking for

  • Timed loop closure problem

    Hello world! I'm working on a project with more comlex VI included, and I have some problems with the closure. I want to manage a statemachine Central stop, here I get a Notifier and send a bool cluster. The first element of the bunch is true if the

  • New graphics card for H8 1360 t, no video

    Just got a new card graphics mini GTX 670.  To install it, booted up with everything that sounds normal but I don't get any video.  Have tried a few changes in the BIOS without success. I am running windows 7. Help?

  • Gel application - "the required samples are not yet acquired.

    Hello I have a vi that controls a test bench. The vi was created using Labview 8.6. Vi works fine and controls to the test correctly when running on the pc where it was created in the full version of software development (which is not converted into

  • I get 0xc00d36c4 or 0xc00d11cd(0x4) error codes when I play the songs in the music app

    Original title: music app Get 0xc00d36c4 or 0xc00d11cd(0x4) error codes trying to read some files ripped from my own CD other files ripped in the same way on the same PC playing okay. Why is this and how can it be fixed. I ran the app store already.

  • Video Autoplays despite advanced actions

    I have several videos embedded in a module, and each one is programmed to pause until the user clicks play.  But the video to the FIRST slide of the autoplays module, regardless of the advanced action related to it. (Note: this only happens when publ