Slow to open Reliability Monitor?

Similar Questions

• Reliability Monitor does not work, please help.

  I tried to reset it using this tutorial: http://www.sevenforums.com/tutorials/20779-reliability-monitor-reset.html

  It seemed to reset the reliability monitor, as when I open there was a message at the top telling me that if I had just installed Windows 7, I might have to wait a day before entries would appear. However, it has been a week and still nothing, the graphic is completely empty.

  I also tried following a walkthrough of: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/my-reliability-history-contains-nothing/5b2cfcac-4f23-4fc3-b206-985108ab0161

  All this seemed to change the message displayed at the top.

  

  I already checked and Scheduler of tasks claims Ractask runs successfully.

  

  So, I honestly don't know what the problem could be at this point. Somethings, I noticed that I could either be causing this or other computer problems are:

  (1) WinSAT, which is listed under in Task Scheduler maintenance contract, has apparently not performed over the YEARS.

  

  (2) monitor Performace said the system diagnostic and the recording of the performance is stopped.

  

  and (3) a follow-up to start event session called Rac_PS is disabled (this is related to RacTask?)

  

  Thus, any help / advice would be appreciated. (Please tell me just do a system restore, this problem has occurred for at least a year and my restore points only rise to the head of one month).

  Hi Jeffrey,.

  I'm sorry to know that you are always faced with the question. To resolve this problem, we will follow these steps:

  Step 1: Manually Reset the reliability monitor:

  1. turn off your Windows 7 problem report history.

  NOTE: You need to do step 6 at this link above to delete all the problems.
  2. If the reliability monitor is open, close it.
  3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
  4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
  5. to save the history of reliability data-
  WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
  (A) copy the PublishedData and the StateData files and paste them to another backup location.
  6 open the folder PublishedData.
  7. Select all files in the folder and click on delete.
  8. click on Yes to approve it.
  9 open the StateData.
  10. Select all files in the folder and click on Delete
  11. click on Yes to approve it.
  12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
  13. close Windows Explorer.
  14 emptying the trash.
  15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
  16 open Reliability Monitor to see it reset now own.

  NOTE: If the reliability monitor is already open, then close and reopen.

  For additional help, you can also check out the article below which explains more on reliability monitor:
  http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspx

  If the problem persists, try step 2.

  Step 2: Update a registry setting.

  1. Click Start, type Regedit in the Search box, and then click Regedit.
  2. In the registry editor, set the value of the following registry entry to 1:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Reliability Analysis\WMI\WMIEnable

  Restart the computer.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/en-us

  How to back up and restore the registry in Windows

  I hope this helps.

• I would like to read the reliability monitor for the period of October

  I would read the reliability monitor on my laptop for the period of October.
  When I go to him, it shows me the results of the period between 6. in August, when I bought the laptop and 25 August.

  I'm not able to find the results for September and October.
  Where can I change the date of the controlled period?

  Thank you very much for your help!
  Daniel

  Hello

  See this Microsoft page.

  How to use reliability monitor
  http://Windows.Microsoft.com/en-us/Windows7/how-to-use-reliability-monitor

  Here you can find info how to use reliability monitor

  -Open the Panel of control-> system and security-> review your computer state.
  -Click Maintenance-> verification of the solutions to the problems reported-> view reliability history.

• Reliability Monitor does not work in Win7 Ultimate

  Can someone shed light on why the reliability monitor does not work in Windows 7 Ultimate? Apparently, it has not operated since I installed the operating system on a dual boot w/Vista system as nothing recorded, nor any indication that current operations record is!
  I don't remember having a problem with the tools of Perf and Rel in Vista and performance monitor seems to work in Win7?
  I already read the thread on this issue which was published in January 2009.
  Any suggestions welcome!
  Thank you

  Hi dw_witless,

  Thanks for posting on Microsoft Answers!

  I suspect that data collection is not enabled. To follow the steps below to enable it:
  1 activate the data collection for reliability monitor
  Reliability Monitor uses data provided by the RACAgent scheduled task. Reliability Monitor will begin showing an indication of stability, and event information specific 24 hours after installation of the system.
  The RACAgent scheduled task runs by default once the operating system is installed. If it is disabled, it must be enabled manually in the software component for Microsoft Management Console (MMC) snap-in Task Scheduler.
  Membership in the local Administrators group or equivalent is the minimum required to complete this procedure.
  To enable the RACAgent scheduled task
  1. Click Start, click in the search box, type taskschd.msc, and then press ENTER.
  2. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows, and click RAC.
  3 right-click RAC, click view, and click Show hidden tasks.
  4. click on RACAgent in the results pane.
  noteNote
  The RACAgent task name is maybe not completely visible. If you don't find it, expand the name column in the results pane.
  5. in the Action menu, click Activate.

  If the steps above does not
  2 reset the reliability monitor:
  1. turn off your Windows 7 problem report history.
  NOTE: You need to do step 6 at this link above to delete all the problems.
  2. If the Reliablity monitor is open, close it.
  3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
  4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
  5. to save the history of reliability data-
  WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
  (A) copy the PublishedData and the StateData files and paste them to another backup location.
  6 open the folder PublishedData.
  7. Select all files in the folder and click on delete.
  8. click on Yes to approve it.
  9 open the StateData.
  10. Select all files in the folder and click on Delete
  11. click on Yes to approve it.
  12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
  13. close Windows Explorer.
  14 emptying the trash.
  15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
  16 open the Reliablity monitor to see it reset now own.
  NOTE: If Reliablity monitor is already open, close and reopen.

  For additional help, you can also check out the article below which explains more on reliability monitor:
  http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspx

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Some slow to open programs

  Hello

  I had a brief look at various forums and did not find everything that contributes to date, so this is.

  My main problem is that some programs (Windows Media Player, Panel, Nexus Mod Manager to name a few) are extremely slow to open. By slow, we're talking up to five minutes. My boot time itself is fast, and the computer runs fast at any other time. My machine is a PC game and very good material, that is specified in the lower part. I use Glary Utilities to regularly clean up the drives, registry clean and defrag etc and I have very few programs to run at startup. None of this solves the problem.

  If any other information is needed please ask and I'll give you.

  Any help is greatly appreciated.

  TECHNICAL DATA:

  -Overview-

  Processor: AMD FX (tm) - 4130 Quad - Core Processor
  Memory: 4077MB (1333) about to be upgraded to 8 GB, with the permission of Christmas.
  Motherboard: GA-78LMT-USB3
  Windows Version: Microsoft Windows 7 Home Premium Service Pack 1
  Installation date: 20 / 01 / 2014
  Monitor: Generic PnP monitor
  Video card: AMD Radeon R9 200 series (R9 280)
  Mouse: Microsoft Comfort Mouse 4500 (Centre of keyboard and mouse)
  Keyboard: USB input device
  Hard drive: ExcelStor Technology J9250S ATA Device(232GB,IDE)
  CD-ROM/DVD-ROM drive: Optiarc DVD RW AD-5240 s ATA Device

  Hello

  I use Glary Utilities to clean regularly drives, registry clean.

  This could be the cause of your problem. Microsoft does not recommend the use of registry cleaners as they can cause insoluble problems on your computer. Glary Utilities has all the backups of the registry before the "clean"?

  Download CCleaner from here. Once installed, open it and head over to the Tools tab, and then select start. In the lower right corner, select Save in the text file and select a name for it. Open the saved document and display its content in your next reply. As-well as. Click the 'clean' tab, keep all the boxes to check it and press run cleaner.

  Another possibility, is that you can have malicious software installed on your computer. In addition, I recommend that you download and run the programs below and delete all that they detect.

  Malwarebytes Anti-Malware - http://malwarebytes.org

  AdwCleaner - http://www.bleepingcomputer.com/download/adwcleaner

  Junkware Removal Tool - http://www.bleepingcomputer.com/download/junkware-removal-tool

  There are additional instructions for execution of AdwCleaner on the link below.

  Thank you

  Legaede

• Thunderbird 38.4.0 very slow to open or delete messages (about 5 seconds) CAUSE: Bitdefender AV

  Very slow to open or delete messages in Thunderbird. Compacting folders, emptied the files Junk and trash, no improvement. Just improved 38.4.0 (about 3 hours ago)

  If you have not changed anything except thunderbird update, then it is probably caused by antivirus software. See https://wiki.mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues and https://wiki.mozilla.org/Thunderbird: test: Memory_Usage_Problems

  Let us know what Dominique ind please

• new updates of windows, firefox slow to open

  My computer installed two new windows updates... KB3021917 and KB3006137. Since then, Mozilla Firefox is slow to open. It takes at least 5 minutes. However, once the internet is in place, it works fine. It's just the process of the opening of the internet. Help, please.

  Hello

  I did some research and found out that it should be good if you ignore these two updates.

  KB3021917 - unless you are testing 10 Windows, you don't really have this update.

  KB3006137 - this update is pretty useless too, it changes the currency symbol of the Lithuania. https://support.Microsoft.com/kb/3006137?WA=wsignin1.0

  I hope this helps!

• Hello, I need to use the shortcut keys to open 'Network monitor', Ctrl + Shift + K, or F12 opens only "Console", thanks

  I need to open "Network monitor" using shortcut keys, no "Console".

  Hello sacrum02, ctrl + shift + q should open the network section of the developer tools.

• Slow to open the first time after startup apps

  Slow to open the first time after startup apps

  How about, the second time, that is, close and reopen?

  Also download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• 7 Firefox is very slow to opening pages as compared Web o firefox6

  Compared to firefox6, this version, ff ver # 7.0.1 is very slow to open Web pages. It takes a long time to display the Web page. I tried to disable add ons and did everything I could, but it seems that there is a no solution.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• El capitan 10.11.3 very slow to open anything.

  I just 'upgraded' from 10.7.5 to 10.11.3.

  This slowed my MacBook Pro (2010) by doing anything.

  I had TO update because I bought an iPhone 6 and she needed a newer version of iTunes.

  Now, the MacBook is very slow to open anything - 'pages' 'number' ' safari - and Web sites.  Strangely, once in a website, it's normal, he's going from page to page as fast as before.

  Can anyone help please?

  As you have made the leap from an older operating system by, is it old software that requires an update to function properly.

  Also, you have enough RAM, the specifications for El Capitan said 2Gbs but 4Gbs is more realistic and of course more IS more.

  You have applications that start at the start of Mac, maybe you don't need them running.

  Anti Virus and 'cleaning up' apps are not necessary.

  You can download this small http://etrecheck.com/ application that checks your system and then paste the report here

  then folk can take a look and perhaps draw some conclusions as to why it is slow.

• How can I fix problems identified in reliability monitor

  computer acted weird-lawful when I turn it on, it emits a continuous beep which increases in volume until it reaches a level almost Earwig.

  Critical error messages appear in the reliability monitor newspaper that is to say of prevhost.exe, rundll32.exe, conhost.exe, has stopped working. (and others)

  A moderator has moved this thread in Forum Windows programs.

  Hi, Brian,.

  Windows OS

  Computer brand and model

  You run special applications that continue to cause the error?

  What are the ID messages or impossible event that coincides with the critical error

  To rule out malicious software, restart the computer and start typing the F8 key

  Select Mode safe mode with networking

  Download the following tool and run a scan complete

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

  Start > type CMD

  If you use Windows XP, press enter

  If you use Windows Vista or Windows 7, right click on CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  Asked may to your support to Windows Setup if there are corrupt or missing files

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Availability of the troubleshooting resources to Start Guide

  http://technet.microsoft.com/en-us/library/dd883276(v=ws.10)

• Firefox is slow to open

  Firefox - hotmail

  Firefox is Slowww to open, opens with text on text, depends on, slow to open.

  Hello

  1. are you facing problems with Hotmail?

  2 is the issue limited to Firefox?

  If you encounter a problem with Hotmail, I suggest you to send your application in the Windows Live Solution Center.

  http://windowslivehelp.com/product.aspx?ProductID=1

  If the question is limited to Firefox, I suggest you to contact the Support of Firefox to get assistance.

  http://support.Mozilla.org/en-us/home

  I hope that helps!

• Extremely slow to open Web pages.

  My PC Dell 2 years contains Microsoft Windows XP Home Service Pack 2, with a processor Intel Pentium 4 3 GHZ processor and 504 MB of RAM; and I installed Norton Internet Security 2010.
  In the months it has become increasingly slow to open web pages, and in particular one I opened after the connection. This page now takes about 2 minutes to open, and then another 30 seconds before the download links and I have my slider control.
  I delete my files and cookies every day and I clean the disk and defrag every week, but nothing I try will speed up performance.
  A couple of days, I ran 2 scans of Registry Cleaner programs, and both indicated that I had literally thousands of flaws, including registry entries. Residual unwanted files; Elements of privacy; Bad Active X; and not optimized Performance characteristics.
  I considered buying one of the registry cleaners, but did a little research and found that they could cause even more problems that I currently have.
  I am somewhat a novice in the computer game, and I hope a kind person might explain in layman's language what is wrong and how I could fix it (easily).
  A big thank you to you all.

  Hi Malkeleah:
  My deepest apologies for not responding to your more sooner - my wife and I went away for 10 days just after your reply and when we arrived home I found myself with a virus, but I don't think I caught the computer!
  Both myself and this machine of circuits, wires and chips (or other) are now back to normal, and as promised, I'll give you a walk through of what has past. (will probably not be in the right order, but you'll get the gist of it, I'm sure). Son of my co-worker was the computer expert who got everything running.
  Basically, what he was doing was: remove all unnecessary programs that were run in the background. uninstall Norton 2010 SS and replace it with McAfee Security Suite (linked to the BT Net Protect Plus); Remove my 504 MB of RAM and replace it with 1.24 GB of RAM; back up everything I had in my computer on a flash drive. delete a lot of unnecessary programs from Windows; close the whole 'thing'; and restart using the 2 CD from Dell. There are other things that I'm sure he did, but I just don't remember.
  Thus, in a Word, my friend, this little baby now works as a Cray computer (starting & closing and opening web pages, all now faster than a bullet speeding - well, to me anyway).
  Malkeleah, as I said, the sequence, I gave you is probably all out of sync, and I realize that you're not a fan of McAfee, but my young friend knew a lot more than me and Philadelphia lawyer I was talking, and everything that has happened wonderfully since its development.
  Thanks a lot for your help. My apologies again for not having affect earlier; and if I ever need your help once again, I know how to get in touch.
  Sláinte!

• Windows live mail very slow to open and use?

  Windows live mail very slow to open and use.

  With the help of Vista - Bt Broadband

  Any help or advice appreciated

  Best wishes Sam

  Hello

   
  It would be better to post the same question in the Windows Live Mail portal for assistance. We have a dedicated team to help you with such questions.
  Windows Live Mail Portal: http://windowslivehelp.com/product.aspx?ProductID=15
   
  Hope the information is useful.