Slower call to VI on the second and the third iteration

Similar Questions

• Unable to wait 30 seconds and then call the TCL Script as Action?

  Hello and good afternoon all!

  I was browsing through different threads and did some research and I am unable to get my applet to wait 30 seconds and then call a script TCL to a succession of 'action '.  Here is the Basic script I am trying to run:

  Event Manager applet track-loopback1
  Event track 10 down state
  command action 1.0 cli 'enable '.
  Action 1.1, «config t» cli command
  Action 1.3 cli command "event manager applet-counting backwards.
  action 1.4 cli command 'event timer countdown 30 '.
  action 1.5 cli command "action 1.0 wait 30.
  Action 1.6 cli command "end".
  Action 1.7 cli command "tclsh Loopback1 - Notification.tcl.

  The goal of this applet is simply wait interface Loopback1 go down, and then launch the applet "-Countdown ' which waits 60 seconds before calling end my TCL script.  The pattern of ' countdown time 30 "and the" action 1.0 wait 30 "is my (lack of?".  :-)) understand that after counting 30 I need to a trial of the action - but I'm not 100% clear on this?  Ironically, he does, in fact, call the TCL script, it does not wait 30 seconds.  My current workaround is to simply throw a statement "after 30000' in the TCL script, but I'm really curious to know why it does not work as expected (well, as I expected to work anyway!).  Any help would be GREATLY appreciated.  Thank you very much!

  See you soon,.

  Travis

  See my response to https://supportforums.cisco.com/discussion/13009231/eem-applet-wont-fire... .  What you do not work, so you should not call tclsh to EEM anyway.

• Videos will play for a few seconds and start the buffering again.

  Buffering

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  You download the video more slowly as you watch it. So when he says "buffering", he expects to catch up and download what you are willing to watch next.

  This type of internet connection do you have? Dialup? DSL? Cable? Whatever it is, it's too slow for what you do, or do you have some problem that it slows down.

• WmiPrvSE.exe constantly calls c:\windows\system32\tzres.dll and tzres.dll.mui in the Windows 7 SP1

  clean install of Windows and all the Windows updates applied, same Microsoft Security Essential antivirus installed, and the WmiPrvSE.exe process constantly calls c:\windows\system32\tzres.dll and tzres.dll.mui in Windows 7 SP1.

  If the use of the HARD drive is never-ending, because he calls the files per second, and I have the red light of the hard disk activity lights up every second.

  

  also this problem because constant use of the processor to 3% in my PC, the WmiPrvSE.exe process never stop calling the above mentioned files.

  Hello

  For a better understanding of the question, I would like to know if the computer is connected to the domain network?

  Windows® Management Instrumentation (WMI) is a component of the Microsoft Windows operating system that provides control and management information in an enterprise environment. With wmiprvse.exe, managers of files in enterprise environments are capable of configuring and searching for desktop system or network information and applications on the network. Developers use the wmiprvse.exe file to develop applications used for monitoring purposes. These programs can inform users about important events associated with the right management of network and files or applications after each event occurs.

  Method 1:
  I suggest you to put the computer in a clean boot state, and check if the problem persists.

  Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to install all Windows updates available including the optional updates and check if it helps.

  See the article for more information.
  http://blogs.msdn.com/b/WMI/archive/2009/05/27/is-Wmiprvse-a-real-villain.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

  Hi there - first post here, so please be nice :-).

  We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

  I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

  Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

  Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

  If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.

  Concerning

  EFIN.

  Do you get the same error when you try to add the network adapter by using the command line?

  1. esxcfg-vSwitch - L vmnic1 vSwitch0

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. Any ideas please?

  I have a new mini iPad 4. I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. I don't know how it came to be. Any ideas please? Thank you.

  First try a reset to see if it finishes downloading. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait until the iPad tour starts on its own.

  Check if you can remove the application. If not go into settings > general > use iCloud and storage > storage > storage management. Wait for the list of apps to open. See if the float is on the list. If it is delete it from there.

• Firefox crashes constantly on my Macbook pro. It opens the page for 7 seconds, and then it crashes. Reinstall, del profile, clear the cache did not help

  I can't open more Firefox on my MacBook Pro. When I try to open Firefox, the start page appears for 7 seconds and then Firefox closes and opens a report. During these 7 seconds, I can't use any button in Firefox. I deleted all of firefox and Mozilla in my library and in my cache. After that I did a reinstall of Firefox. But the problem is existing.

  You can check policies corrupt and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button

  Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button. It this causes only after I opened Firefox, my computer works well before the opening of Firefox. I h

  It looks a little like yo maybe has a hardware problem on your computer. have you tried to repair permissions on your hard drive? create a new Firefox profile? Use the Profile Manager to create and delete profiles Firefox

• When I run firefox it takes about 30 seconds and it prevents the functioning of my mcafee? It started after I updated to version 10!

  When I run firefox it takes about 30 seconds and it prevents the functioning of my mcafee? its has started after I updated to version 10!

  Hello

  You can try to update the add-on of McAfee. The latest version is reported to be less problematic. See also this.

• I bought an iPad 2 Air and reserved for a free service call to show me the ropes. Nobody phoned me in the allotted time. What should I do?

  I bought an iPad 2 Air and reserved for a free service call to show me the ropes. Nobody phoned me in the allotted time. What should I do?

  Click on the help link at the top of the page and connect with Apple

  Or you are welcome to ask us your questions

  iPad - configuration - Apple Support

  User Guide - Apple iPad

• Phone numbers contained in the e-mails and the web links will appear for several seconds and then disappear. I use Yahoo mail, however, if I use IE 8, the problem does not occur. Help!

  Phone numbers contained in the e-mails and the web links will appear for a few seconds and then disappear. I use Yahoo mail, however, if I use IE 8, with Yahoo mail, the problem does not occur. Help!

  This has happened

  Each time Firefox opened

  Is whenever I use Firefox

  Tools > Addons > > Extensions

  You have the Skype for Firefox extension?
  If so, disable it. Known to cause this problem for many users.

• If I block a caller, can I delete the number and still blocked it

  If I block a caller, can I delete the number and still blocked it?

  Yes. It is possible to block a contact and then delete the contact. They will be still blocked.

• my computer screen goes off for a few seconds and the lights without turning off the unit. This has happened several times, regardless of the period in which stays on.

  My computer operating system Mac Pro OS X EL Capitan 10.10.3, ink 13"early 2015 screen off for a few seconds and back on without turning off the unit.

  This has happened several times, regardless of the period in which stays on.

  Don't know what is happening with your publication details.  You posted in space of the Macbook Pro forum & even your profile indicates: ' MacBook Pro (retina, 13-inch, early 2015), OS X Yosemite (10.10.3)..

  Your post indicates you are using a Mac Pro, which is a desktop computer and with the help of El Capitan who is 10.11.2 not 10.10.3 which is Yosemite - 'my computer operating system Mac Pro OS X EL Capitan 10.10.3.

  

• My MBP 2012 gets very hot on the bottom on occasion.   He also seems to be slow at times especially at the beginning of the session.  I ran a check and here's what I got back 11/4HDD/40000000 SATA (0,0).  Any help on what's going on?

  My MBP 2012 gets very hot on the bottom on occasion.   He also seems to be slow at times especially at the beginning of the session.  I ran a check and here's what I got back 11/4HDD/40000000 SATA (0,0).  Any help on what's going on?

  a quick search brings us to recent threads = the essential so that "SSD or related connection.

  https://www.Google.com/search?q=4HDD%2F11%2F40000000+SATA+%280%2C0%29+site%3Aapple.com& ie = utf - 8 & oe = utf - 8 #q = 4HDD/11/40000...

  Mac Laptops: Apple Hardware Test may report alert 'HDD' - Apple Support

  ...

  ... If the message in addition to the other problems related to the drive to solid state (SSD) or Flash storage disk, go to an Apple Retail Store or contact Apple's Service Providerwith the computer.

  ...

• Companys keep the call telling me they are Microsoft and my computer to send them signals of error

  Original title: scammed

  Companys keep the call telling me they are Microsoft and my computer is sending wrong signals that I have been scammed by apturo for £145.00 already do I need help with my computer and these errors. Thanks much jam

  The game, 18 June 2015 13:01:55 + 0000, BobSummerville wrote:

  APTURO scam is alive and well... and I just fell for it.  I was scammed to the tune of $ 207,91 to solve a problem on my computer that did not exist.  Convincing, but aggressive, 'technician' called Microsoft Support had received reports that my computer had been compromised and that his company had the task to fix.  The malware to compensation would cost US$ 169.  I've stupidly it gave access to my computer for all 90minutes.  What he was doing right now that I don't know, but I just finished all my blocking bank accounts and change the passwords.

  It is not good enough, as far as I'm concerned.

  In addition to their money get on your part to do anything of any value,
  If you leave them in your computer, who knows what they were doing or where
  What confidential information they stole.

  So if you have done so, I highly recommend that you do both of the following
  immediately:

  1 do a clean reinstall of Windows.

  2. after reinstallation of Windows, change all your passwords.
  especially one of the banks or other financial sites. Once again, even do
  If you have just made.

  Since they have perhaps installed a recorder of strikes, changing just your
  Passwords may not be good enough.