Small Nit, great Frustration

Similar Questions

• I can make a picture that I made smaller more great once again without losing quality?

  Back in the days where you dragged a picture so he got smaller, then it would change to a smaller image. If you wanted to enlarge the image and then dragged by its corners that you would end up with an image that was not good in quality. How it works today? I use Photoshop CS6.1 and slipped a few images in my project. The image on a layer, I've done more little clicking Ctrl + T and dragged by its corners while he got the smallest. If I change my mind later and you want the picture on this layer is most grand and dragges out by its corners. Quality gets bad like in the past?

  Hello, this happens because whenever you change the size of your image you resample it and you lose the original info. If you want to be able to change the size of an element in PS, I suggest you and turn it into a smart object.

  Follow these steps:

  1. Select the layer with the image

  2. in the main menu choose layer / Smart Object/convert to smart object.

  Once you do this conversion, you can change the size how many times you want and you won't lose quality, because you will not affect the image directly, but a copy of it. BTW, if you set the size of a greater amount of the original image, the final result will not be good because you do not have such a quantity of information at the source.

• Download great frustrations... Help!

  Do you have this several years via FrontPage, but not for the life of get me Dreamweaver to upload my site!

  Using Firefox and Win7, but don't know their firewall settings and can connect to the host pretty easy. Been through many of the Dreamweaver and site files/tutorials host and the literallly I tried dozens of combinations did not ever test Fireworks to connect on the host site... would like to talk to a real person, little help would be greatly appreciated!

  TIA, 3G

  Well first off, the directory in a * nix environment must be public_html not public_ftp.  The FTP folder holds another purpose that I wouldn't get in.

  This error indicates the address you type in is incorrect, or the FTP service is down / is not running (your way is fine, IE: / public_html).  Check with your host about what should be the address and verify that the service is running properly.

• HP Deskjet 1056 (all-in-one) do not print all of a sudden

  Thank you in advance for your answers and direction.

  For some reason, I could not get my PC to print at all (no test do pages either). I just rebuilt my PC with Windows 7, I have done this literally 100 times before and have never encountered this dilemma. I installed the software from the manufacturer's Cd, all right. Installation was made initially with the USB unplugged and then plugged when requested by the software. Each attempt to print (including test pages) sends in Quebec City and then times out with a non-specific error. I used the printer software HP and doctor Scan and sometimes (I tried 4 times) it will be just "hang" on the field "communication with the device. Other times it crashes through showing all green checkmarks in this software not showing no conflict (this is while I try to print a test with no results page). I downloaded what I believe to be the latest drivers from HP (DJ1050_J410_1313). After you have uninstalled the original software CD, I installed the new drivers in the same way with still no joy. The last known response seen on my PC was the "door" was closed and had to be opened to print (it was the announcement several days ago). So, I seem to be communication, when I opened the inner door to access the ink cartridges during printing, the HP software warning me to close the doors to continue printing done burst upward (which was just my attempt at troubleshooting if there is a communication between the printer and my PC). I tried printing, Outlook, Word, Notepad, HP software, email (online) all with the same events that results. My printer is set by default. Also set on USB001 Virtual Print Driver with my usb port (how hard, it is connected to my PC). I have tried to change the main usb wire with another, still communication, but not printing. I'm not completely PC illiterate, but I have to admit no small degree of frustration and loss of meaning.

  Any help would be greatly appreciated.

  I tried just a drain of my registry to verify there is no conflict with drivers or double entries and found nothing. Cleaned all register the same and attempt to print a Word document and still the same results.

  I realized I should explain some of the other things I've tried: restart the PC (twice). Restart the print spooler in Services. Back by unplugging the power cord and wait 15 seconds to connect.  Dance a jig, walk around my chair... everything you can think back on this printer (well... maybe not that extreme, it feels just like that)

  Thank you once again

  Hi @mrewho

  I know that this can be a frustrating experience, I'm happy to work through it with you. In a first time ice it seems you have done everything but yell at the Moon, I mean you did a jig, that should do the trick!

  You have the printer USB cable connected to a 2.0 or a 3.0 on the computer port? I'm sure you know the difference, but for the other members of the community who may refer to our conversation of help, here's an image to see what to look for;

  

  3.0 ports are supposed to be backwards compatible, but I've seen problems occur when they are used for printers.

  If you are already connected to a 2.0 port we can try something else, I don't think not that you tried again, the printer Installation Wizard. I know that you have uninstalled and reinstalled several times between the jigs and indirect Chair, but have you tried the printer Install Wizard (PIW)?

  If no, please uninstall your software again, then remove the server properties if driver is have not deleted during the uninstallation, then use the PIW.

  1. The new software - uninstall the printer software Instructions

  2. 1. in the folder "devices and printers".

     2. choose "print server properties.

     • Win XP - with no printer selected, click 'File' then 'server properties '.
     • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
     • Windows 7/8 and 8.1 - Select any printer in the "Devices and printers" folder and click on "Print server properties" above.

     3. click on the "Drivers" tab at the top of the window "properties of the print server.

     4. choose the printer that you want to uninstall, and then click 'remove '.

     5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

• Download and run the HP printer install wizard for Windows

Please go back to let me know if that fixes the problem, thanks. Fingers crossed!

• Pen tool, some paths, basic shapes, etc.

  Hi, first sorry for my bad English.

  I bought the ipad pro and pencil to apple, when it came out last year, trying to replace my macbook and imac in illustration and design work. I hope that Adobe, as one of the major design software developer, would a pro for us software "artists" in a few months. Not need to be too pro version full of mac os, but at least something that works for all kinds of artists:

  1 - drawings of hands free

  or

  2 precise geometric designs

  The first option in this version of works "Illustrator draws" regular, not great and not bad. We can make several good designs, the quality is good. But whenever I need a more specific move, small details. Frustration begins: no path, no selector to move a part of the drawing (just move the entire layer), etc.

  In the second option "illustrator draw" is simply not do work with this kind of artists (my case). I hate to be repetitive, but all I can say is that I tried to work with adobe apps with my ipad pro and apple pencil. And it is impossible (for my kind and style of work).

  I downloaded graphic Autodesk and Protosketch. Two of them, it is much MUCH better that Illustrator draws, I can get the end result in both entities. There's the pen, Bezier work tool just fine, select traced, paint, paint, move, align, insert the position and scale, remove and what I want is possible with these applications.

  So my question is, why adobe do not develop an app that make already what these apps do for years?

  Where is the pen tool (Bézier, etc.)? where selection points? where is the base of any vector software?

  Hi Lucas,.

  I'm sorry to have taken so long to answer. Thanks for posting.

  When the draw was created, it has been designed as, well, adjuvant to Illustrator CC. something that would allow people to start a project away from the desktop computer, and then complete it on the desktop.

  People have started using it to learn more. That has intensified since the introduction of the iPad from Apple Pro and a pencil and we receive many requests and suggestions to make the application more "useful". And we take them seriously with regard to the evolution of the draw. That said, despite the fact that they are requested with a certain regularity, I am not sure that the plan is to incorporate an Illustrator - Bézier or the selection tools in the app. I would like to have more information for you...

  I pass all comments along to the team produced and I'll share yours, in its entirety, with them also.

  Thanks again for taking the time to post.

  Sue.

• 3G modem internal with slot for Satellite A500-12W SIM?

  I join this forumn in great frustration because I spent hours online looking for an answer.

  I run a Satellite A500-12W with a USB 3G modem, but I do not have this fragile thing that comes out of the computer and occupying one of the only 3 USB ports. Under the battery, there is a slot that says SIM, but it seems to be empty, because it cannot contain a SIM in place.

  I don't have a 3g internal modem, I have WIFI capabilities.
  Surely, it must be possible to buy a card that goes inside and works the same way as a USB modem?

  There is an empty slot next locations of memory which says 3 G/TV and something else, is that place and in that case, what should I buy?

  I am eternally grateful for any help, it frustrates me a lot. Thanks in advance.

  Sweden ColorBlend

  Hello

  Satellite A500-12W does not support the 3G modem and was not equipped with an ability to use the sim card in order to connect to the internet.

  The point is that there are different A500 in the market with different hardware configurations.
  Perhaps the same notebook chassis has been used and, therefore, you can see this place to a sim card.

  However, I'm not sure if you will be able to update this device with a mini-PCI 3 G map... If something like that would be possible, so you can order this part of premises Toshiba ASP...

• CameraZoom FX does not seem to be save the photos full size, only photos

  Someone else there to help that this program also had the same issue? I took over 100 pictures today for work and when I was getting ready photos on my work PC that the images were not in the folder dcim on the SD card. They were, however, in the folder DCIM (thumbnails).

  The thumbnails are ok I guess, but the pictures are much smaller and greatly diminished quality.

  Thank you

  Colin

  By default, Camera Zoom FX stores the photo files in the internal phone storage in the "Zoom Camera" folder. If you want the files in a different folder, you can specify in settings under then save camera folder.

  Check the "Zoom Camera" folder and your pictures should be there in full screen.

• The large paintings of calculation time

  Dear friends, dear LabVIEW developers,

  I'm trying to reduce the time of calculation for large bays. (In real life I'm eliminating unimportant vertices of a 3D mesh.)

  Migration from 8.6 to 2011 already has done a great job for me. And also I am pleased to run Windows 7 on a 64-bit computer.

  But, imagine a pointer-oriented language where you'd change an array element, you do not expect the computing time to change with the actual length of the table.

  Here, I work on a wide range of groups of array of length may be different (rather short, containing the indexes of the neighbors of my vertex).

  My problem is that I really don't see the reason why (I'm happy) the 100 times more slow performance when having a 100 times more great picture at hand for the fair value of the Exchange.

  Suggestions to work around to get the speed of the large paintings those comparable to small is greatly appreciated.

  Kind regards

  Jannis

  PS: I tried DataValueReferences but just the computing time to get 1 million references is almost an hour.

  

  Thank you guys!

  You were very good!

  Steven and Ben worked have been my brand of test bench has been poorly implemented, which Ben explained perfectly. This test has sent me the ghost hunting awaits the delay time for the large windows in the wrong place - the structure in Place.

  My next mistake was my local chaos with different versions LV and 3 PCs: Altenbach and Jeff are of course right about to maintain the constant size of matrix comes mark reduction in a separate meter. I did this at a time in a lost version later - and not a not spot the difference of between ArraySubset and DeleteFromArray the icon for a while...

  My time holes had to be hidden somewhere else. Thanks Ben, unfortunately those black dots of BufferAllocation are a bit small for my old eyes. Not know them at the end of the event and while loops!

  Each 15 seconds I actually shorten the big picture at its actual size to display it in the 3D graph. Now, here's the little interesting: ArraySubset actually redirect the memory at the end of the event and while loops, while DeleteFromArray only! I don't know who wrote somewhere, just not where easily see you...

  And to make it really bad: this allowance is probably made with each loop run little matter what this case has done - slowing of all stocks with it. (By the way: everything as a mem alloc comes even inside a case that is not running!)

  Once again thank you all. For me it's back to work after a very long-term wild-goose chase.

  Jannis

  

• OfficeJet pro 8600 installation in windows server 2008

  Hello

  Having a problem getting the 64-bit driver provided by HP on our Server 2008 standard R2 x 64.

  Tried the execution from the command-line as well, but no joy. Error page appears saying that it is evil

  Operating system or something like that. Confirmed driver and the OS game, but always fails.

  Also contacted HP, but which turned into a trainwreck as usual. They think that non-English

  speaking of people can really help in such things... Great frustration.

  Any help would be greatly appreciated.

  Hi Chicagovince,

  Follow the steps outlined in the document below to install the printer on the server.

  This document provides information on customizing the installation of HP Officejet and Officejet Pro printers of company directors. It includes how to select a printer, what features and drivers are installed and how to deploy the printer on the computer targets using a script to control the installation process. It also includes instructions for the reduction of the size of the deployed package, information about the system requirements of firewall and other technical details.

• IdeaPad Y530: windows does not start after that laptop went to sleep mode.

  Hello

  More great frustration in my life have laptop brand new, this for me.

  After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

  I was able to go back to Windows that day after leaving just laptop without any power and battery.

  I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

  Anyone have any ideas?

  Thanks for the reply.

  That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.

• SFC wants SP2 disk to repair, but I'm at SP3. Is this OK to use the disk?

  Hello

  When I do "sfc/scannow" I get the following message "Windows - files required for Windows File Protection is running properly have been replaced by unrecognized versions." To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition Service Pack 2 CD now".

  I had to upgrade to Service Pack 3 to install MSE. As I understand it, once you have installed SP3, you can't restore the system to SP2. I just want someone to confirm that I really should put the Service Pack 2 CD.

  Thank you!

  Lol you should not put the SP2 CD.

  I don "t know if you can to SP2 or not since I've never used the restoration of the system (except practice), but which would have been, you can Uninstall SP3 if you want, but you will lose all the features and benefits of the version of the Service Pack 3 + year, System Restore.

  Now that your question is confirmed, what can you do about it?

  Once you install SP3, all installation XP CD you have with older SPs are practically useless for sfc/scannow (by themselves).

  The best option is that if you have a real XP bootable installation CD with a plu SP is to make a new installation CD that has SP3 'slipstreamed' into it, so what comes out the other end is a new installation of XP you create that will be integrated into SP3.  You must already have a genuine XP bootable installation CD to do this.

  What you end up with is a XP installation CD with SP3 integrated into it (and you can book your old version).  Which will make happy sfc/scannow, sfc/scannow is not for fixing problems on a system.  sfc/scannow is designed to run only once when you install XP to populate the folder dllcache with a list of 3498 system protected files which are backups in the case where a protected file come missing later on your system.  That's what all this.  It is not to solve problems, unless your problem is that your dllcache folder must be updated, or your problem is you have too much time and need to lose some of them.

  While it gives a good "feeling" when sfc/scannow to runs without complaining (and you can make sure), it is unlikely address any questions you may have and are a great, frustrating waste of time (as you can see) - unless your question is trying to get the sfc/scannow to run without complaining.

  If you run sfc/scannow to completion and you have all the pieces in place, it should find nothing to do.

  However, even if you break your system on purpose and sfc/scannow is a file in the dllcache folder that needs to be replaced and replace it (it IS what it is), you will know about it since the only thing that you will see where the Observer newspaper is the following:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  Even if sfc/scannow finds something to do, you will never know about it.  It is not his goal.  Its purpose is to populate the dllcache folder.  In the above example, sfc/scannow replaced 2 files that I've damaged on purpose for a mission of training and test, but you won't see anything about it in the newspaper.

  That's why running sfc/scannow again more than a waste of time.  If he finds something to do, you don't know yet what he did.

  If you don't have a genuine XP bootable installation CD, hope is not lost, but I'll let Microsoft support engineers who are hired by Microsoft experts help you with this part.  I do not think that the Department of Education will tell you about "slipstreaming" either because they probably don't know how and there is no KB article for their link, in their response.

  Here is a recent example of the MSE ineptitude and lack of understanding of the sfc/scannow (soon to be marked as the answer):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/sfcosdll-missing/4836955e-4517-45A8-a19f-85d7d5ecf3f5

  I have several times also offer my professional services to teach Microsoft how sfc/scannow technical support engineers work in the hope that they will not be there when they have no idea what is the problem with a system or how to fix it.

  Sorry...  I had to get that last shot - again.

• X 220 configuration

  Hi people.

  I would like all first admit that I have absolutely, completely and absolutely no idea what I am on and also, I hope that I've not posted in the wrong section of the forum, but if I have, I'm really sorry and please do not hesitate for one quarter.

  A bit of context. I am a first year student United, and I need a new laptop, because my current one (acer) only has a range of ~2.5 hours. -Some days I 8 hours (the joys of Medicine :/), and I use adobe reader X to annotate my slides, so I really need something that can get through everything without having to be charged.

  So basically, what I want is something small, with great autonomy and light enough.

  After a lot of navigation, this X 220 seems cheap but well.

  When I was mucking around with the configuration tool, I'm done with this:

  	Intel Core i5 - 2520M (3 m Cache, 2.50 GHz) processor
  	Genuine Windows 7 Home Premium (64-bit)
  	12.5 "HD (1366 x 768) LED Backlit Display, ready for wide-band Mobile antenna 2 x 2
  	Graphics processor Intel HD Graphics 3000 with dynamic frequency
  	4 GB PC3 - 10600 DDR3 1333 MHz SODIMM Memory (1 DIMM) SDRAM
  	128 GB Solid State Drive, Serial ATA
  	Battery Li - ion 9 cell
  	ThinkPad 1 x 1 b/g/n
  	Broadband mobile ready (no module mobile broadband)
  	1 year warranty deposit/Express

  I was wondering if anyone knows if the things that I took are... 'right '. (Once again, sorry incompetence). I have the 9-cell for long battery life. Solid state drive apparently makes things go faster? -I don't need a lot of space, because all I have is PDF and music.

  But, with this configuration, the machine will work? Parts here are other not functional? I know this must seem incredibly stupid, but I don't want to buy it and then discover how I configured it makes some parts work more slowly, incorrectly, or all simply does not work.

  I appreciate all the advice really

  Thank you for all your help

  I bought the laptop from lenovo oz last night, with; Processor i5, ips display, 2 GB of ram, 320 GB HDD, battery 9 cells for $900

  The holidays are starting June 20 (it's exams atm ), so it'll be a pleasure to project little Tinker (out) this new laptop with more ram and an ssd.

  I'll have a read by changing a 9.5 mm to adjust it once I find the time.

  Once again, thanks a lot.

  Once (if) I get a little more knowledgeable with these things, I will try and participate a little more in the community. -No doubt I'll be back again in a fortnight to complain because I broke the laptop

• Download Firmware SPA122

  I have problems with the download of the firmware of http devices.

  I have the following game

  Yes

  http://myserver.com/spa122.bin

  And none of my devices never contacts for new firmware.

  I did a test system set up for her

  Yes
    TFTP: //myserver.com/spa122.bin

  And I see when using tftp in the random motion of newspapers for new firmware-

  Any thoughts why http would not work?

  (On a side note, I have 1000's of SPA2100 SPA2102 SPA1001 PAP2t that work without problems)

  Thank you!

  In fact, I have described you the PAP2T - ATA behavior for example very old. I have not tried it on SPA122 as I draw here.

   Any thoughts on a way of having the device always look for newer firmware with out "re" provisioning a new URL? 

  Reset to factory default.

  I have no idea why it is important to have the constant Upgrade_Rule, but you try to administer the rare device.

  The common method is to set up periodic download of provisioning can't get the firmware file (Moreover, it is not possible). It comes to file size - service file is small, the great firmware file.

  Change of name of the firmware in the configuration file is as simple as editing these files. Once commissioning new become downloaded by ATA, the firmware download will be triggered.

• Another issue of queues DSCP/QoS/CoS of 6500/7600

  OK... a little confused, thinking, that I know what needs to happen, and what is happening now, but it is true UN-certainty with that I hope that people can help.  Here are the basic configuration:

  A---|6500|--10G--|7604|---10G---|7604|---10G---|6500|---B

  You get the point.  Traffic crossing A-> B or vica versa.

  All the links of the kernel are L3/Routed, not L2/Vlan/.1q/ISL

  Traffic is marked on the Board with a political map of penetration.

  Traffic is confirmed through DURATION that it contains both CoS and DSCP/ToS, leaving the 6500 s two-way headed the core of 7600

  Traffic is ALSO confirmed through extending classes * receipt * on the other side by the 6500, that DSCP is maintained but CoS is gone/0.

  Considering that only 6708 - 10G modules allow apparently dscp values mapped to the queues/thresholds, which leaves me with the research of the queue on the penetration (for VoIP traffic priority) with cos-of-queue / beat mapping as well as output with cos to queue mappings.  Of course, this is not possible (at least on the penetration) if the 7600 are not preserving the CoS on the output of the port.

  This leaves wondering if the 7600 are same queue evacuation traffic based on internal mapping supposed DSCP-to-CoS that is supposed to happen before the queue/Scheduler.  Interfaces are all set up as "trust dscp" right now.  So the CISCO docs should be rewriting CoS to 0 on the penetration and using reliable dscp values to determine internal DSCP, which in turn should be used with DSCP-CoS map appropriate queue on exit... I am a sceptic, what happens really... and unfortunately, have really no way to verify (that I know) because the show on the 6500/7600 commands are fairly primitive about QoS stats...

  Then, we have been re - think about it and thought that maybe the thing to do to solve this problem is to:

  -Trust cos instead of dscp

  -enable transparency dscp (no rewriting dscp) so it is kept on the side of the switch output

  And so by doing this it would be:

  -use CoS to tail of penetration

  -use CoS to output queues

  - And to preserve the original CoS and DSCP/ToS values

  Would that be correct?

  Two other config options I thought were:

  -queue only mode

  -mpls cos spread (although I don't think that would do what I want, but rather simply spread non-existent MPLS EXP bits)

  Any help would be greatly appreciated... I read so many different docs now, my head is swimming

  Couple of caveats-

  (1) all the below apply to pre IOS 15, as I have no experience with which it may be different

  (2) I have not used a 7600, but I used the 6500 much but both share a large number of the linecards and I suspect you're referring to this kind of linecards.

  The main problem is that the CoS value is contained in the 802. 1 q non-native added tag VLANs on a trunk link. But your links are L3 if there is no value CoS to preserve.

  This creates two problems for you-

  (1) input queues. On penetration, the queues are CoS based which means you need to a CoS value to assign packets into queues. On the 7600 s you're obviously not see a CoS value for the reason explained. Now, you can use a political map and a service policy to classify and mark inbound traffic. But, as far as I know, you can set the IP precedence or DSCP marking in a map policy on traffic of the penetration. Some cards like cards ARE for the 7600 support defining a CoS value but I think they are the exception rather than the norm.

  (2) output queues. You are right in what you say, IE. You can trust the DSCP/IPP incoming value and then, assuming that the line card doesn't support based DSCP output queue, the 7600 may derive a value based on the internal DSCP value CoS and then put in the correct output queue.

  Yet once, however, without a trunk there no value written in the packet CoS.

  I entirely agree that it can be very difficult to tell exactly what the 6500 in terms of marking internal etc. This is one of the great frustrations with the 6500.

  Hope some of that helped.

  Edit - the only way that you can trust CoS on penetration as far as I can see is to make the trunk links IE. you use a vlan dedicated for each interconnection and allow only that vlan on the link. Then you simply transfer the IP addresses assigned to the physical ports for the SVI to the new VLAN on each switch. You should make sure that the vlan that you authorized through the link was not the vlan native because you need a tag to add.

  Jon

• Spooler does not, 1813 and 1053 error. HP PSC 2355.

  Hello.
  Details: Computer is a Dell Studio 1558, W7 professional, the printer is an HP PSC 2355.
  This is the second time I had this problem with Windows 7.
  I recently notified Microsoft on this issue.
  Problem has been resolved the first time, after the great frustration, by restoring the computer to the factory settings, having tried all fix and provided suggestions.
  This has solved the problem of spooler and I might add a printer (HP PSC 2355)
  Pilots where downloaded from the web, such as the printer did NOT appear in the drivers supplied with W7.
  Everything worked fine for 24 hours until what I was unable to print because of print spooler won't start do not.
  Naturally I'm very bored now.
  Please notify. Is this caused by the drivers of HP or is there a problem with W7 that need fixing.
  (Added only software which is not included with the computer is Office 2007, provided by my employer who has a site license and the viewer click).
  Your help is appreciated.
  Jeff.

  sfc/scannow seems to solve this problem.  There are some other post on the mistake of 1813.  I don't know how the system files are get damaged. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1