smart photo 7520 quality default project?

Similar Questions

• with smart Photo 7520 booklet printing problems

  I have Windows 8 & just bought HP Photosmart 7520. I'm having a lot of problems with printing as a booklet.

  On the hand print Page , I chose "landscape", 1 page per sheet, & left binding. Also define the subset of booklet for "both parties".  I put the size of the paper to "Adjust the actual size" (in fact the paper size does not seem to matter). I make sure that the 'booklet' is highlighted too.

  This is where things get hairy: my impressions are turned upside down when printing on both sides.

  1. I checked under the section 'Properties' that will 'Layout' & have tried to "Flip on short edge" without control "auto rotation" on the main print page
  2. I tried the same thing as above but in «back long edges»
  3. I check 'auto' turn on home page, & he checked "Flip on short edge" under properties
  4. I repeated #3 & checked "Flip on long edge" under properties

  Is there something else I can do?  I'm so frustrated! (By the way, I had to go through trial & error with my first HP all-in-one, too - my 5510, but with different options of your choice) Why is it so complicated?

  Help!

  I did #1 & #2 as you said under Properties / page layout; "" but I discovered this: - in the page size, - DO NOT hit "booklet" under the section layout (do in the main print section.) Page per sheet must be marked as "1" (booklet will make 2 pgs appear side by side on the half of a complete pg) also, I discovered "Flip on Long Edge" worked.

  Then on the main print section I continued to keep the subset as "both sides", linking as a 'left', & Yes, portrait orientation was right (Bravo!).  I have NOT checked "auto rotation"I put the size of the page 'clean'. "  I clicked on the icon of the libretto, then to print the value * (see the tip below)

  It took 2 tries to do things.  Which is weird, it's print preview showed two of them looking for the same thing, but as I said, the 2nd try worked.  Yay! I hope this will help many others.

  * Another tip: on the homepage print where the section named the pages you print, type the words "Page" next to the number.  I typed in "Page 1 - Page 4" & I got a good sampling of the entire brochure & how it would print.

  Booklet happy printing!

• Smart photo 7520 e recently acquired

  Hello, I have just become the proud owner of a photosmart e 7520, I want to make it work for my iPad and also need a diagram as to what all is... help! You'll collect that I'm not too clear on these "simple" things are appreciated and I thank you in advance. Sue

  Hello

  Congratulations on your new purchase of the printer. I have included a link to the page of troubleshooting and support for your printer here .

  Here you will find the installation for printing instructions wireless for your apple product.

• HP3565A0. Smart photo 7520: My HP3565A0 Photosmart 7520 used print

  He told me that the driver was not available. I've deleted and reinstalled several times. I do not have the disk, so I did it online. What can I do to print again?

  I went to the printing and scanning doctor on the link that you sent me and it installed the printer again and now I'm good to go. Impressions, as he has done before. I don't know what happened to bumble, but I really appreciate your help. I was about to throw it out and buy a new printer.

• My wife has created a book of the best photos of the year project. How can I copy these photos in a standard album so I can use this set in the future?

  My wife has created a book of the best photos of the year project. How can I copy these photos in a standard album and the book so I can use this set in the future? All the commands I want to use are grayed.

  Using Photos of Apple.

• smart photo Media does not

  smart photo Media does not

  Hello

  Try to use Recovery Manager to reinstall HP MediaSmart Photo - the procedure is detailed in the document at the link below.

  Reinstalling software and drivers - Windows 7

  After reinstallation is complete, restart the PC.

  Kind regards

  DP - K

• Problem w/HP Media Smart Photo program on HP Pavilion Elite

  Hi, first time user here. I do a LOT of pictures like "gimmies" for friends and family, especially around the holidays. My computer just planted a fit recently and don't let me NOT look at my photos. I can download them and see the photos, but as soon as I try to click again to revisit, I get the following message: HP Media Smart Photo main program has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. (Apparently it wasn't available yet!)  I tried all that I know, which isn't much I admit. I have a Geek Squad coverage but it's Christmas and they cannot get me to more important things - such as the installation of new sales. It's okay I bought two from them in two years. Lightning struck an and now I can not see pictures or do anything with photos on it. (Which means I can't order some presents that involves photos stored on THIS computer.) Can someone help me to fix my problem? I would REALLY appreciate your help! How Merry Christmas and God bless you and yours!

  Hello

  The first thing I would try is to use Recovery Manager to reinstall HP MediaSmart Photo - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  http://support.HP.com/us-en/document/c01868333

  After reinstallation is complete, restart the PC.

  When windows has completely recharged, open HP MediaSmart Photo and give it a few minutes to index all your photos again and then check if it opens correctly now.

  Kind regards

  DP - K

• WW146AV: Problem with HP Media Smart Photos

  My HP Media Smart pictures has suddenly stopped working.  When I try to open my pictures, it stays on for a few seconds and then closes.  I think I need to re - install the Media Smart Photo software; However, I have to uninstall the old software before I can re - install.  I will not lose the pictures that I previously imported into Media Smart?

  Second question: If someone has had this problem with the closure of news media Photos Smart after a few seconds?

  Windows 7 64 - bit;    Laptop HP Pavilion dv6t-3100

  Hello

  It looks like existing MediaSmart Photo installation is damaged, but the software indexes only the pictures that are on your drive hard reader, so uninstall and then reinstall this product will not result in the loss of all images.

  Note that, once the reinstallation is complete, launch the software and let it re-index your multimedia files - this may take a few minutes depending on the number of images.

  Kind regards

  DP - K

• smart photo Media is "currently occupied" I can't do anything.

  Smart photo Media will not stop running, I think its continuously uploading images and I can't stop it or delete some stuff.  When I try to get the message says 'smart media is currently unavailable '...  Any suggestions?  In my library of hp of pictures lots of pictures is marked with either a green check mark, blue arrow of things and others have also locks gold on them.  What are these and what do I do?

  Smart photo Media will not stop running, I think its continuously uploading images and I can't stop it or delete some stuff.  When I try to get the message says 'smart media is currently unavailable '...  Any suggestions?  In my library of hp of pictures lots of pictures is marked with either a green check mark, blue arrow of things and others have also locks gold on them.  What are these and what do I do?

  ==================================================
  No guarantee... but maybe the article would be worth a visit:

  HP MediaSmart photo program

  Overlays (arrows, coches) are probably backup status indicators.

  See the following link for an example...

  Norton 360 backup status indicators

• When I Zoom in on a photo, the quality decreases. How can I keep that from happening?

  When I Zoom in on a photo, the quality decreases. How can I keep that from happening?

  [Moved General forums, all-Adobe, unsupported forum lounge to a more specific product - MOD support forum]

  Working with larger images.  More pixels = more information.

  Nancy O.

• Smart shape loses quality publish

  No idea why the smart shape loses quality on published?  The edges are losing their beautiful rounded shape.

  What information do you need?

  BTW - published product Preview in Captivate, real published files and preview in the browser.

  

  Thank you!

  Micky

  If this is the case then it probably is not much else you can do to improve the result with a smart form.  Captivate is probably converting it to a raster the runtime image, not a vector.

• Adding still Photos to the video project

  I have a video project that I'm working on.  My preset in first Elements 10's HD 1920 x 1080i 5.1 sound.

  I got out of the video on DVD and played it on a drive standard def DVD and on my computer.  The video is horrible.  If I play on a Blu - Ray player, it looks perfect.  Anyone know why that would happen?

  The DVD release should not play on a standard player def DVD even if the source material is recorded in HD (AVCHD to Sony camera)?  The presets are selected in source material not the resolution output, no case?

  I also did photo slideshows and used only the photos that I reduced to 1000 x 750 (72 dpi).  The video image is superb playback via a standard DVD player or a Blu - ray player.

  However, when I try to combine the two... HD source material with more photos... nothing seems to work.  I chose the good built-in HD and resized the pictures both 1000 x 750 and 1500 x 1127 and they both look bad during playback via a normal DVD player or my computer.

  How can I get my photos in a single project to look great during playback via a standard DVD player and playing on a computer and HD video.

  Yet once, I chose the right preset for video, since it will be the largest part of my project and tried resizing of photos to meet the project preset. I chose DVD as output.  Video and photos look terrible on playback via a standard DVD player or on the computer.

  Help, please!

  Welcome to the forum.

  Unfortunately, you're in down-rezzing from HD to SD, which is 1/4 of the resolution, as your original source files. A SD DVD is never as good as you HD material.

  Is there a reason that you do not have a BD? It is the HD, and will be very close to Source footage.

  Good luck

  Hunt

• How to add photos in a smart album to a book project?

  I have created a book project and wanted to use all the photos I have in the smart albums. Is there a way I can import the photos in an album?

  The project was launched? Then show the sidebar (menu display ==> see the side bar), open the smart album, select all and drag to the Porect in the sidebar

  If it is not accurate then open the album smart, just select and click on the + up to the humble and create the project

  LN

• Is it possible to have a gallery page that does not allow to click on photos to open this project in another page?

  I like the page layouts that are offered with fast access to a site Web MyPortfolio, but there is something I want to change that I can't understand. On the default of the gallery page, you create projects that people can roll and click on open pictures that are in this project in a new page. I want to make sure people can't click on the projects. I want a gallery page where people can only display photos on this page. To me this looks more professional to have projects that people can click on. Is it possible that this can be done? Thank you!

  Hey Corey & Julie

  Currently, Adobe the Portfolio is set up with galleries and projects in these galleries. However we will certainly take this feedback to the team that we broaden our themes + customization options

• How can I fix the gap between the default project settings and the music video

  I'm building a DVD in yet CS6, and some of the images you want to fragile/wobbly preview and after that I have burn to disc.  I think it's because the images were shot at 24 fps, progressive and native transcoding for standard def DVD settings are 30 frames per second, interlaced scanning speed.

  I could not change the default conversion settings, and research online, I did, it seems that those who are set in stone. I was able to modify the project settings to export a lot of my images, but it did not help the problem. Nor do transcoding the video clip.

  The project was originally shot on two cameras - a Canon 5 d Mark iii and a Panasonic GH2. Images of Canon has no problem. Only the GH2 images seems wobbly preview and make. I edited the video file in Adobe Premiere Pro CS6, and then exported to MPEG to DVD at 24 p, set NTSC high quality large screen. Any ideas on how to solve this problem?

  Editing mode: QuickTime DV NTSC

  There is your problem.