with smart Photo 7520 booklet printing problems

Similar Questions

• Print issues with old photos scanned .jpeg prints too large & can't print in black & white

  I have a bunch of old photos & scanned articles of a scanner flat of maybe 10 years ago or not.   These are all .jpeg files.

  First of all, when I print on the Windows Live Photo Gallery, they are all print in color, no matter if I change my printer settings or if I go in settings in Windows Live Photo Gallery and deselect color.

  Secondly, not printing in black & white, they all print out extra large and therefore do not fit on an 8 1/2 x 11 pages.  All this elements analysed in years were roughly between 3 "x 5" until maybe 8 'x 10'. "  The fact is that they don't print as I would like.

  One last question, is that I have a newspaper article large .pdf format.  I printed it weeks and had no point of color above.  But I printed this on paper 11 "x 17".pdf file.  She printed on the entire page, but it was stopped at the bottom of each printed page, and I don't understand why.  Which certainly confused me.  Any suggestions?  My plan was to save the pages together to view the log what it was.  It's pages of the newspaper of 1886.

  Thank you

  Sue

  Hi Sue,

  We apologize for the delay in response.

  This problem occurs with the printer settings.

  I wish that you run the printer Troubleshooter and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Note: He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If the problem persists, please refer to the article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If the problem persists, please answer with the number of the printer model to verify if there is no known issue.

  Thank you.

• "The file... is associated with another photo in the catalog" problem

  I have about 300 000 images stored on a disk in Drobo. Due to a hardware problem with the Drobo itself, I had get a new Drobo. I placed my old drives inside the new unit and everything appeared fine in the Finder. But in LR, everything happens with the "...". the original file is not found. "When I try to locate and correct the association I get, 'the file... is associated with another photo in the catalog. Each file can be associated with a picture. "There are not many copies. How can I solve this problem? Thank you.

  Are the files in the same place exactly as they were before your accident of drobo? i.e. the volume is a not the structure exact same name and folder? If Yes, you shouldn't have to re-associate the files and you should be able to double-click on an image and Lightroom it true already knows where is the image. If it isn't, you may need to stop Lightroom, disassemble the drive and reassemble and then open Lightroom again. I saw Lightroom being very slow to recognize the disk he thought no was not available was in fact already mounted.

• HP3565A0. Smart photo 7520: My HP3565A0 Photosmart 7520 used print

  He told me that the driver was not available. I've deleted and reinstalled several times. I do not have the disk, so I did it online. What can I do to print again?

  I went to the printing and scanning doctor on the link that you sent me and it installed the printer again and now I'm good to go. Impressions, as he has done before. I don't know what happened to bumble, but I really appreciate your help. I was about to throw it out and buy a new printer.

• Photosmart 7520: cartridge printer problem

  There are 5 locations of the cartridge in the printer, and I never had no problem with cartridges before that.  Four of the five slots hold what I describe as 'slim' cartridges - 3 color, black. The fifth housing contains a cartridge slightly wide, black - 564/XL with an icon that looks like a hexagon.  I put all the cartridges match to their icons. The combo or one package of 564/564XL I bought do not contain the black cartridge "slim."  Icon on it looks like the 'open doors' on a lift - in opposing arrows. 564/XL certainly does not fit the slot (position left-most). So while 4 out of the 5 was inserted and "snicked" well put, I get the message 'lack cartridge' and I get this - I am missing a cartridge! I'll go back to the store and ask for help, but what don't get me? I bought the combo packs before and got just what I needed.

  Hi @JMA1961,

  Welcome to the Forums of HP Support!

  I understand that you did not correct black cartridge in the pack that you bought. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrating it must before you. To clarify, it depends on where you buy the combo pack, if she would have the black cartridge include. Please check the box for more details.

  NOTE: Depends on the retail store, whether or not it would be included.

  • The cartridge that described you as "open doors on a lift" is the black photo cartridge, which has the symbol bowtie on him. This cartridge can only fit on the side of the extreme left of the printhead.
  • The cartridge on the right side is the main black cartridge that has the shape of a Pentagon on the subject.  This cartridge only fits on the far right of the print head.

• Size for the file booklet printing problem

  Hello folk forum!

  While developing a PDF booklet for printing to the local copy shop, I came across a problem, I feel that I've not had before.

  When I "export" my document of 28 pages in PDF format it is about 27 MB, which is logical. However, when I use the option "print booklet" my record is rather 2.2 mb. Of course, the PDF booklet looks like garbage and export non-carnet seems.

  Is it possible to choose subsampling for the print booklet option? I can't seem to find an option to do this and with the help of Indesign files do not really mention that.

  Any help would be appreciated. Thank you!

  Matt O.

  You need not touch the Distiller.

  In the print booklet dialog box choose print settings, in the dialog box that is generated, choose printer Adobe PDF 9.0 for a printer, you choose 'PDF options' and you can set what you want.

  It is kept by document but you will need to make a "Preset" If you want to use it in others.

  

• HP envy printer range: HP envy with Win7 Remote Desktop RDP printing problem

  Hello

  I have a printer HP envy 5530 works well for my laptop.

  When I connect to my Win7 Remote Desktop Server (on which HP envy drivers are also installed) and try printing locally on my HP local printer, it does not work.

  When I look at my local mobile print queue, I see two copies of 'Remote Desktop redirected Printer Doc' contained in the queue. One of the queue said copies and then print. Impression size document in the print queue shows 4 KB that is abnormally low, then the missing documents from the print queue, but are not printed on the printer.

  Note that I have no problem with the same laptop, same Remote Desktop server, but using a different printer (not HP).

  I saw that on several forums (including this one), many users have this same problem but I've never seen a valid response that solves this problem with RDP.

  Any idea?

  Thank you

  I solved the problem by creating a new printer on the local computer and configure the port to the Standard TCP/IP port with the IP address of the printer and the HP Deskjet 6940 driver use. Deskjet 5500 driver may work as well.
  
  The problem is with the specific Envy 5530 driver.

• smart photo 7520 quality default project?

  How you define the quality of project setting so this will be the default setting for regular printing?

  Since our Ipad, it prints normal which is dark. We don't know how to go in the printer settings and reset it whenever we print.

  I went to advanced options under my computor for Muslim to output and set in quick project.  When I print, it returns to normal

  Greetings!

  Create/modify the default setting for printing on your computer your preferences as follows should help...

  1. Close all open applications
  2. Go to control panel and choose devices and printers (you may need also this shortcut in your Start menu)
  3. In the window see you your printer, right click and choose printing options
  4. Make all the respective changes here and click on apply, then OK
  5. From there on your default printing option, when you click Ctrl + P or Print, would be what you set.

  If I helped you with your problem please mark as resolved

  * You can say thank you by clicking on the stars Kudos *.

• Installation with Kodak ESP Office 2150 printer problem

  I tried to install my printer for hours. It is connected wireless and my computer picks it up on the network, but when I go to add printer, the installation will not through. When I try to add the printer via the Menu/printers/add printer to start, I get this message: "the printer installation failed. Impossible operation completed (error 0 x 00000643). "Then, when I try to install it via the Kodak Web site, its says:"failed installation. Error code is 80072F78. (Code: 101-80200000). "Can someone help me please. It is a very sensitive time. Thank you!

  You could settle on a previous installation. Try this:
   
  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it.
   
  Open the Device Manager
   http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  See also these toppings:

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
  http://support.Microsoft.com/kb/944960

  Error: code 80072EE2 while installing Web all-in-one printer software
  http://support.en.kodak.com/app/answers/detail/A_ID/1754/kW/installation%20failed.%20Error%20Code%20is%2080072F78/selected/true
  NOTE: In addition to 80072EE2, this answer also applies to the following error code: 80072F78

• 6800 with Mac Officejet Pro Wireless printing problem

  Hello

  I use a 8600 Officejet Pro with a Mac on Mountain Lion

  He was fine and now will not work wirelessly with mac, macbook or Ipad.

  I have double connections wireless enabled and all on the same network, but will not see printer when I try and add it again.

  It works fine when connected by usb

  Any ideas please?

  Thank you

  R

  The printer is always connected to the network?  Check by going to Configuration > network on the front of the printer and network Test search and print.

  What router are you using? You've restarted it by pulling on the power cable?

• Smart photo 7520 e recently acquired

  Hello, I have just become the proud owner of a photosmart e 7520, I want to make it work for my iPad and also need a diagram as to what all is... help! You'll collect that I'm not too clear on these "simple" things are appreciated and I thank you in advance. Sue

  Hello

  Congratulations on your new purchase of the printer. I have included a link to the page of troubleshooting and support for your printer here .

  Here you will find the installation for printing instructions wireless for your apple product.

• Vista/Viewer Photo Gallery print problem with canon ip2500

  Can someone enlighten me on a problem of color photo printing quality.

  Running a relatively new machine Vista OS and Canon IP2500 inkjet printer, photo impressions paper out of looking very weak and faded, if printed photo gallery / print Viewer.

  However, the printer seems to work perfectly OK producing images all in color, if the same photo, for example, is inserted into a Word document and then print.

  I can't find any adjustment managed to make in the printer driver software, to improve the situation.

  Is there a known issue with this combination of technology, or someone at - it a solution for me to be able to print correctly from the photo gallery / print viewer.

  Thanks for any help,

  Gerry

  Hi GerryWise

  You have the latest drivers installed for the printer?

  I suggest you to make sure you have the latest drivers installed for the printer.

  Also after you select print in Photo Viewer, windows or windows live photo gallery you will get a new window asking "How do you want to print your photos?

  Here, you must select 'document Type' (default value is regular paper which will result in faded prints). Choose the correct photo paper for your paper stock settings.

  Then, you may or may not get a "Print preview" window according to your printer settings, preferably with additional choices for setting printer. Check the preview as well and move forward.

  You can also check the below mentioned links for additional assistance and check -http://windows.microsoft.com/en-US/windows7/Print-a-picture
  http://Windows.Microsoft.com/en-us/Windows7/picture-printing-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows7/printing-tips-learn-how-to-print-labels-envelopes-and-more
  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  I hope this helps.

• WW146AV: Problem with HP Media Smart Photos

  My HP Media Smart pictures has suddenly stopped working.  When I try to open my pictures, it stays on for a few seconds and then closes.  I think I need to re - install the Media Smart Photo software; However, I have to uninstall the old software before I can re - install.  I will not lose the pictures that I previously imported into Media Smart?

  Second question: If someone has had this problem with the closure of news media Photos Smart after a few seconds?

  Windows 7 64 - bit;    Laptop HP Pavilion dv6t-3100

  Hello

  It looks like existing MediaSmart Photo installation is damaged, but the software indexes only the pictures that are on your drive hard reader, so uninstall and then reinstall this product will not result in the loss of all images.

  Note that, once the reinstallation is complete, launch the software and let it re-index your multimedia files - this may take a few minutes depending on the number of images.

  Kind regards

  DP - K

• Eny HP 4520: Printing problems in word Document with photo

  I just purcahsed a HP Envy and I use the function print via the wireless option. I have a word document that I was able to print in the past which has an image inserted into the document. All in the words fine printing copies only the upper left photo f. When I show preview before printing, it shows that if the whole of the document will print correctly and the image should print very well... I have attached what print preview looks like and what actually prints

  Hi @dmanyeah,

  Thank you for reaching out to the forums! I understand that you encounter printing problems in Word, the full image is not printing. Thanks for providing the screenshots. I'd love to help you.

  Try to print a picture from another application to see if you have the same problem.

  To exclude the driver, install a generic driver to see if you have the same results.

  • On the computer, go to start, devices and printers, right-click on your printer and select printer properties.
  • Click the Advanced tab and click new driver, and then click Next.
  • HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings. (you can always go back and revert to the original printer driver)

  What version of Word are you using?

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• C-8180 HP Photo Smart wet pictures blurry printing, dirty, dark.

  What can I do on the printed photos are coming to soak it with ink. Pictures are blurred, smeared and dark. Ink gets everywhere you fingers. The printer is an all-in-one Photo Smart C-8180. I have installed all new ink cartridges. I used the HP Photo paper only. The print head has been cleaned. If I have a word document to print on paper, it prints ok. The problem is that when I want to print photos. I do not often use this printer. I bought it mainly to print quality photos. It printed fine in the past, but now they are terrible, stained, blurry and dark. Anyone know what the problem might be and if it can be fixed? Appreciate all the help that can be given. Like I said I do not use the printer but especially to print photos. I certainly don't want to replace this printer for this reason. Thanks in advance for your help

  Usually this problem is caused by the dry time being too short. The document below the link should help you clear up the problem. Let me know what happens.

  http://goo.GL/wCCcF