Review maximum level :-o

Similar Questions

• Maximum levels

  What is the maximum number of levels for a flash 8 movie?

  a little more than 16,000 or 2 ^ ^ 16.

• The sound in my laptop is off even the volume is at the maximum level

  Hello. Good Eve. I just need help. The sound on my laptop will not work. I have to update the driver, whenever I used it, and after a minute, it will produce its new. I really need help to solve this problem! Thank you!

  I recommend first of all check the Panel of office for updates.  Some of these must be installed prior to 8.1 will update correctly in all cases.

  1. Click the button start (bottom left) and choose Control Panel
  2. Click system and security, and then choose 'Find updates' in the Windows Update section
  3. After they are all installed and restart you, check again because some must be installed before others are offered
  4. Open the app Store and download the 8.1 update if you work with all the latest patches and updates

  If it still does not respond, someone mentioned that they had some success by pressing Ctrl-Shift-Escape, then disabling items on the tab startup (especially those related to the sound).

• Keyboard slow and low noise level on a Satellite A110-178

  Hi all

  I have acquired A 110-178, which for me has the right specification.

  However on the first day, I feel that the use of the keyboard gives me problems. It isn't as I type like a pro, I have the 2 fingers way, but when I type most of the time I really make changes because some of the letters will not appear as they skip the step of what i type.

  It should be possible in my view with a laptop like that, just press the keys and have no kind of hit them.

  Is there a way via settings or to make some adjustments?

  Also, the sound is not good... I put it all on the maximum level, but for example Youtube things have virtually no noise while on my desk I never face ny problems or I had with my previous laptop, also a Toshiba.

  I'd be happy to hear your thoughts.

  Hi dutchrob,

  regarding your keyboard: looks like you need to contact a local servicepartner, cause I had the same problem with my Tecra and it was a failure of the keyboard. They will exchange the keyboard if it is really defective.
  This thing of sound can be perhaps a driver related problem, so why you don t try to reinstall you sounddrivers?

  Have a nice weekend
  John

• Low volume on Satellite Pro C665 level

  I have a Satellite Pro C665 & the volume level is extremely low, even on a level of 98% speaker.

  Any suggestions on how to improve the volume level?
  John

  Suggestion?
  But how do offer suggestion if we don t know how you control the sound?
  Listen you to music or watch videos using a certain player?
  Is noise level on this drive set to the maximum level?

• Satellite L300 - after restarting the screen brightness is the highest level once again

  Hello!

  I have a Toshiba Satellite L300-215.

  Just installed Windows XP I went to keen on Vista. In any case I ve downloaded all the XP drivers on the Toshiba site. Everything works perfectly except the brightness level.

  When I start my laptop to the top of the screen is at its maximum brightness that I then use the function hotkey special "FN and f6" to turn down the brightness of the screen. However once I have disable my laptop then restart it, the brightness goes back to the maximum level again...
  Any ideas how I could prevent the brightness that goes back to max?

  I read that it s a particular order I should install the utilities and drivers from the Toshiba website for windows XP?
  The ideas and help in what order?

  See you soon

  Hello

  In your case, I'd install the Toshiba Power Saver. This Toshiba tool is really great because set you the brightness of the screen for different profiles (full power, normal, etc.) and there you can adjust the brightness of the screen. In addition, you can change the method of cooling, the performance of the processor and to this day.
  Check it!

  You can download the energy on the Toshiba page saver. I also have a Satellite L300 with Windows XP and everything works perfectly.

  Here's the order of installation for Toshiba tools, they control the FN keys, etc. :
  Toshiba Common modules
  TOSHIBA Hotkey Utiliy
  Utility Toshiba Touchpad on / off
  Toshiba Utilities
  TOSHIBA Power Saver
  Toshiba Assist
  Toshiba controls

  Good bye

• HP 8560w: CPU clock stuck at maximum speed

  I am under W7 Pro 64 bit on an HP Elitebook 8560w, with i7 2820QM. Yesterday after installing a new device (external finger scanner), I noticed that the fan is running too high. I checked the CPU usage, it has been very low: up to 5%. The processor clock, however, remained at its maximum all the time. I thought - there is a problem with the device driver that is the cause. So I deleted the device in Device Manager, also checked the box to remove the software from the device. No change - problem still there. I've used windows restore for the restoration of control point before the installation of the device. Still not good.

  Then I searched the web for similar problems, could not really find anything very close to my problem. There were some suggestions to update the BIOS, which I did and it did not help. When I let the CPU to 100% its maximum clock, it works in 3.1 GHz (CPU - Z) and the temperature is 88 degrees celsius at rest (ouch!). I turned down in the power settings to work 75% maximum, which turns to ~1.6GHz and then the temperature is not so dangerous, that the fan is now not so much.

  I found some tips to use msconfig, try the boot, which also did not help, but then I tried to disable all the services (in msconfig) and see if that helps. Long story short, if I let all services enabled except 'Power', my CPU running at 3.1 to 3.4 GHz (still not as low as I hope), but at least it is not blocked at speed. And - most importantly - the temperature of the CPU is a reasonable 53 - 58, despite the high clock frequency.

  So here's my question - any idea what could be wrong with my laptop? Why is it still ongoing at a higher clock speed? I have another machine, a desktop computer with i7 2600 and who works 50% clock most of the time, is that max under a higher load.

  Yes, I solved it.

  The problem was inside the app to scan finger. She defined the level of CPU power to maximum during the initialization of the external finger scanner (to avoid possible problems with bandwidth USB) and it should unset it is. Unfortunatelly the endpoint does not work in my case and the level of CPU power remained on the maximum level. Problem has been resolved by application of the small command line (SetCpuPowerLevel) provided by the supplier of the application, which has the power to the processor level back to default.

• Preparation of review DWCS6 ACA?

  Hi all

  I'll get the certification of ACA on Dreamweaver CS6. To be better prepared, I completed the "courses" with "Dreamweaver CS6 Classroom in a book" and "Introduction to Adobe Dreamweaver CS6 with ACA Certification", I followed guides and so on. Now, I would like to book this review but I am not completely sure I know everything you need for. Check around, I saw that there are sites that offer the t-prep or something like that, the simulations of the review of the examples and explanations. Thi, overall, for the ACE exam... and I did not see the ACA one!

  Someone knows a site where I can buy a license or something like that for this kind of simulation? Or at least, it is a good site where I can practice more (or another book that prepares me better than those, maybe... don't say not that they are bad, but I'm not confident in my preparation).

  Thanks in advance!

  EDIT: I think to do the exam prep ACE... would it be a wise choice? I imagine that, once you are ready for a review of the ACE, the ACA will be a walk in the Park... or am I wrong?

  Adobe Certified Expert (ACE) exams are much more complete.  To pass this level, you need to be very familiar with:

  • HTML,
  • CSS,
  • scripts on the client's side
  • scripts on the server, side
  • connecting to databases,
  • panels of different behaviors,
  • work with shapes,
  • working with models,
  • and all other aspects of the version of DW software you are tested on.

  However, the review of the Adobe Certified Associate (ACA) is more than a review of level intro & not nearly as complex.  It measures the jurisdiction of base with your chosen product.  As such the preparation is not either too rigorous. Below you will find the preparation Guides to ACA for DW CS3 - CS6.

  Adobe Certified Associate (ACA) preparation material | Adobe

  Good luck!

  Nancy O.

• Maximum use memory and CPU host

  Hi all

  I have a code that gives me the average cpu, memory of a host of more 1 day use, 7 days and so on.  I want to know is if it is possible to extract the maximum value of CPU usage and the memory of a host in the previous 7 days.  I would like to integrate this in a performance report.  Average usage over a week is fine, but I want to what the maximum value of the previous week was too. If my host CPU hits above xx % at some point, I'd like to be able to see and study if necessary.

  Yes, you can get the maximum CPU usage and the memory of an ESX Server, as the statistical level that curl period is set to 4 (maximum level).

  I suspect you use the cmdlet Get-Stat with the cpu.usage.average and mem.usage.average parameters.

  For the maxima, you must use the cpu.usage.maximum and mem.usage.maximum parameters.

• HP pavilion p6-2469ea: upgrade help

  Hi, I currently plan on upgrading my hp pavilion p6-2469ea to be able to run more demanding games upstairs, as the ARK: survival has evolved and I have no experience with computers I'm stuck help then about what it needs to be updated and some recommendations would be much appreciated. Just to note that I have already updated the 8 GB ram.

  @TomM123, welcome to the forum.

  Here are the system requirements for ARK: survival has evolved:

  http://www.game-debate.com/games/index.php?g_id=23214 & Game = Ark: % 20Survival % 20Evolved

  It is clear from your processor and memory are fine.  I suggest that you upgrade to at least a 750Ti GTXvideo card.  Read the reviews to see what users have to say about it.

  You may need to upgrade the power supply (PSU), also.  The EVGA 750Ti said it will work with a power supply with 300W.  However, most of the members have reported needing at least 400W.  If you replace the power supply, I love the Corsair products.  A modular power supply is best for medium-sized business.  It allows you to use only the cables than absolutely necessary.  I recommend at least 500W.  This will give you a high power for the maximum level of use.

  A final element that will make a major difference is an SSD.  I love Samsung SSD.  They seem to move better without the need to change the BIOS settings.  The only need is to make sure that the BIOS is set to AHCI.  The DSS will not work if it is not setup in this way.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Notifications is not displayed

  I had this question yesterday, which I marked him replied here too soon: pushed to display Notifications.

  The problem persists. After 24 hours using the Apple Watch, I had received notifications, they appear on the screen nor I had any notification haptic. These are defined to the maximum level of vibrations.

  I saw the red dot, my iPhone was locked and outside and the watch does not inform what either. I read a lot of posts here and other sources mentioning the same problem, recommending the closing of the iPhone, iPad and look down and turn then turn on again. I tested several combinations of parameters with no joy. If I turn off the watch, they get well like they did in the iPhone or Mac.

  Some of the things I've tried:

  • Affecting the mirror custom apps and specify notifications it
  • With regard to the coverage of Mute turn off/on (I did)
  • Restart the iPhone, iPad, Mac and Watch
  • Shooting/disable detection of wrist

  The only thing I can think is that I use a Mac I use applications that should be sending notifications, Messages, Slack, phone, calendar, or telegram, but not using these applications at the same time, so notifications obtained thanks to the iPhone but using a Mac may be the cause for not having to the monitor?

  Some of the threads I checked:

  I don't get notifications on my Apple Watch

  Haptic works is not on Apple Watch messages

  Is this all that I am obviously missing?

  Hello

  You have not matched then repaired your Apple Watch an iPhone remains to be seen if that helps?

  Cancel the match your iPhone and Apple Watch

  Doubtful that one if this has something to do with your Mac. Your Apple Watch is synchronized to your iPhone only.

• First HP: Lack of Sections of first graph with steep slopes on HP

  I saw somewhere an old post on the Internet where a user was having difficulty to see the graph of y = x ^ 4 (x-2)(x-6) using a "Decimal point" display window and the "Evolutionary" method in the application of the function. The chart has not demonstrated the branch of the chart with the x origin of (6, 0). The response at the time was to use a different window or switch to advanced graphics application. I don't like either of these options, because much cheaper calculators have not this problem.

  With a little experimenting, I found that the calculator will be graphic curves where the absolute value of the slope (derivative) is less than about 375 * (Ymaximum - Yminimum) / (Xmaximim - Xminimum) where the minimum and maximum levels refer to the values specified in the configuration of the land. When the curve is steeper than this amount, the curve has holes and gaps until this value exceeds of approximately 1500 *(Ymaximum-Yminimum) / (Xmaximim - Xminimum). At this higher value, the curve is usually not in graphic form at all. These expressions are based on the study of graphs of the polynomial given above, y = 1 / x and y = e ^ x for different values of configuration of land.

  I realize with the option of touch screen on the first HP for the graphics window resizing, calculator, developers should be a little more sophisticated in how to get the calculator determine the graph. The current 'Adaptive' method is too risky for me to use unless I know a little on the chart. And the graphic progress is too slow. HP working on another option or is there maybe a setting on the computer I do not use its full potential?

  I've only used the calculator for a few days, but others who have used the calculator for many more are also puzzled. Thanks for any info. You can send our way.

  It is currently being considered. I can't say when / if there will be changes, however on the political basis of HP on 'future-looking '.

  However, graphical representation is one of those things that is "deceptively simple" because it seems to be pretty easy but is actually infinitely difficult. It has in fact been mathematically proven that you * don't * create an algorithm to be quite accurate for the same simple algebra. All graphics engines turn example is a very simple method that collapses quickly for something else then the case of some, it's well, a series of different behaviors for different types of problems in an attempt to account for different types of situations.

  The average general graphic has been done in the past was "moving pixel, evaluate and connect the dots." This works for simple things, but falls apart pretty quickly. Most of the calculators except the first on the market at the present time use some techniques of "smoothing" kind of hide the types of problems, this method can generate and generally work well for simple cases. While that hides things, the problem is he hiding things. :-) In more complicated cases, it actually makes things quite worse.

  In this simple case, most of the systems actually get the "right" result because they always assume that a big jump in values one line drawn to connect them. Result directly in other cases where it draws a vertical line to an asymtote that shouldn't be there. That's why things like Tan (x) go very often vertical asymtotes where there shouldn't be any. To try to avoid this, you need the code to make a special analysis in the case of start trying to filter false positives. It seems that in this case, it is bad filter and eliminate the line here.

  For another thing of pleasure, try the example simple "sin(e^x)" on all your systems. You will get some pretty crazy things and strange patterns here where there should not be any. The "speculative", the first will be closer, but only the grapher advanced with its graphics of interval it gets correct.

  So in short, yes - you put this to our attention. In long, graphic representation is in fact much more complicated then one might expect. :-)

• Satellite M50D - a - Eco Utility stay OUT of

  Impossible to activate the Eco mode: even by clicking on the "ON-OFF" button and setting the maximum level (green leaf) energy saving, it gradually returns to a minimum (plug) and mode turns off after 2-3 seconds. Is there someone who has the same problem?

  Toshiba Eco Utility 3.0.0.6406 version
  Nome modello SATELLITE M50D-A
  Operating system Microsoft Windows 10 Home 10.0.10240 version
  Windows Update KB3074678
  Windows Security Update KB3074683
  Windows Update KB3074686
  Windows Update KB3081424
  Windows Security Update KB3081436
  Windows Update KB3081441
  Windows Security Update KB3081444
  Windows Update KB3081448
  Windows Update KB3081449
  Windows Update KB3081452
  Windows Update KB3087916

  Have you tried to reinstall the Toshiba ECO Utility?

  If it isn't the ECO utility should be available on the page of the Toshiba UE driver

  Next to the ECO Utility relocation, please check Windows power management settings and make sure the ECO power station was chosen.

  

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Satellie Pro M30 needs 15 minutes to warm up

  Whenever I turn on, it will take 15 minutes before you begin to use the lap top.
  For example, I click on an icon on the desktop, nothing happens, if frustrating to wait for my lap top to warm up until I can do something, I must admit, it gets hot.

  Hey you this oldie.
  I think the best solution for you is to install WXP again using disc delivered facilities. Own pre-installed operating system will work well.
  For best performance, I recommend you upgrade RAM to the maximum level. The modules of RAM memory for these old models of laptops are not more expensive.

  And at the end I recommend you clean your laptop. I can imagine that this oldie is full of dust.