Smart View question

Similar Questions

• Question HFM Smart View

  Hello

  I use the standalone 11.1.1.3 HFM. I have connected to the HFM application via the smart view and trying to extract the data. But I get "published" in the cell instead of the data.

  Please could you help me how to display data in the cell.

  	2014
  	Apr
  [None]	Published

  Thank you

  Michel K

  Hello

  Go to view - Options - smartview tab tab. In the State of the cell, select the data rather than managing the process.

  Kind regards

  Thanos

• Issue of Smart View?

  Hello

  Our users report recently that Excel freezes when trying to copy and paste the value of the cell with enable Smart View, the steps they do are the following:

  Open the model smart display of Excel and then click on Control Panel, sharing connection, and then connect to essbase base, ad-hoc analysis.

  then control - C any cell in this model, Excel becomes frozen, they close Excel and restart.

  If Smart view does not activate, then Ctrl C and P control works well.

  Have someone in the Group has a similar question, I hate to blame Smart view for this. We have 11.1.2.5.500 the Smart view, Essbase version is 11.1.2.4

  Thank you

  Is the issue with this model/file?  What happens if the user is using a white sheet excel and did the same steps?

  If its this sheet only, check the display options smart for anything that seems unusual. You can also clear the metadata in the workbook, it could clear up what ever is causing the problem.  to do this, open the template, click Smart View-> Info-> Delete Sheet-> remove all metadata

  given that your username is reconnecting the plug anyway, it does not cause other problems.

• Submit the data Smart View

  Hello

  We cube essbase with Smart View 11.1.2.5.500, users put in place their card smart view presentation technique that extract data from their financial model, my question is that

  When users are ready to send data and connect to essbase, forecast data in the spreadsheet disappear, replace data into Essbase (is there nothing in essbase yet obvious), is any way to avoid this?

  I can add leaf with connection to essbase, then copy the value and submit, it works. But of course, it is not very effective.

  I don't miss something in the smart display setting?

  Thank you

  Dan is correct.  It is expected when connecting to Essbase of Smartview behavior.  The work around what he suggests is also one I have my team to use.  It has additional benefits.  You can do your work on a single sheet and then copy - paste special values only to the Essbase submission page.  In this way, you can use the formula to create your presentation, but not the formula on your shipment page.  Then, you can create a page of validation to make sure that the data matches between the two.

• Smart View removes non-members of the model after Ad - Hoc analysis

  Hi all

  I have a spreadsheet that I recovered using Smart View 11.1.1.3 against Essbase 11.1.1.3.

  When I update this spreadsheet against using Smart View 11.1.2.5.215 11.1.2.3.500 Essbase spreadsheet seems to be remove the cells whose content is not a member in the database.

  
  

  Rest of the worksheet correctly refreshes and I receive the correct data in the worksheet by using the last smart view, but I need to have the content which is withdrawn.

  
  

  Anyone has any idea what is causing this question to ask?

  
  

  
  

  Thank you

  This has been resolved by an Oracle Doc ID 1571254.1

• Remove the hierarchy without affecting only not in Smart View

  I was wondering if someone was faced with the same question.

  We have an online form with all P & L SG & A accounts used for the planning session and we don't want any kind of indentation, and I'd rather flat. So, we used "delete the hierarchy", and it works perfectly in the workspace. But when we opened that in Smart View, it always shows the indentation in the rows.

  Is this a bug / it's just normal behavior / is because of the difference in the version for planning and smart view

  Planning Version - 11.1.2.2.300

  Smart View - 11.1.2.5 version

  Concerning

  Amarnath

  ORACLE | Essbase

  This was noted as a Bug 11790086 code: REMOVE the OPTION of HIERARCHY DOES NOT SCREEN IN SMARTVIEW

  "If a form uses the hierarchy for a line option or a column, the hierarchical structure always displays when the form is opened in SmartView.  The hierarchy option works correctly when the form is opened from the web of planning. »

  HTH-
  Jasmine

• error Smart view 11.1.2.3 in Excel after installing

  I have Microsoft Office 2007 and install smart view Hyperion Workspace 11.1.2.3 bit, but got an unidentified sells opened Excel.

  Kindly help.

  Please follow the steps below

  1. from Control Panel for any installed smatview, if so please uninstall the same

  2. take the backup of the Windows registry.

  3 remove the entries of HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\options

  4. download the latest version of smartview from the link below.

  http://www.Oracle.com/technetwork/middleware/smart-view-for-Office/Overview/index.html

  Also just to update before asking a question in the forum, please do a search there are many requests even posted earlier.

  Thank you
  ~ KKT ~.

• Smart see question 'Adjust column width is activated. "

  We get a question Smart view "column width Adjust is turned on. I enabled this option in Smart view, but still getting the same problem.

  This error is only coming to the office in 2013.

  
  

  Thanks in advance
  

  Office 2013 not supported with 11.1.2.3.100

  Mohan

• Selection of members deliver Smart View 11.1.2.1.102

  Hello!

  I have a problem with several different cubes when you access the selection version Smart View 11.1.2.1.102 member function. The problem is related to 4 Essbase cubes, but among the 4 are two ASO & BSO.

  When I select the name of Dimension higher, more on the left and click on the selection of members, NO display names of members and the drop-down list is unavailable. As soon as the Dimension is moved out of the POV, I am able to see the list of full member. It also means that the Member who moved into the top, leftmost now has the issue of not being able to select all members (some dimensions are very well regardless of their position).

  I am able to move the members by rotating the dimension and the selection of member function behaves normally, for some, but the question pop backup as soon the dimension is moved to the position of POV.

  If anyone has encountered this before with SmartView problem and has a solution, please let me know. I'd be happy to clarify my question if anyone knows not what exactly I'm describing.

  Thank you for your time!

  There was a bug in 11.1.2.1.102. I don't know if it has been fixed in 11.1.2.1.103 or 11.1.2.2 (I think as 11.1.2.103)

  It does not hurt to upgrade you to a higher version of Smart View

• Smart View Excel Add - In Error Message

  A client was trying to perform Smart View and it crashed. The display then shows the message/question Excel:
  
  «Excel has experienced a serious problem with the snap "oracle hyperion smart view for office, edition of fusion".» If you have seen this message more than once, you must disable this add-in, and check to see if an update is available. Do you want to disable this add-in? "(Yes/no)
  
  The customer has NOT disabled, but rather disconnected Smart View and then reconnected. When they did that, they were hunted Smart View after a few minutes and was then again reconnect.
  
  Is there a solution for this problem? They really need disable the add-in, and then add the Smart View? Please indicate the exact steps to solve this problem.
  
  Thank you.

  Hello

  Whenever I encounter this problem, I simply close excel, put an end to all the processes related to excel and excel reopens.

  However, said that the problem is known and we have a new bug to the same EXCEL CRASHES when YOU OPEN OR SAVE a FILE [Bug ID 12957863] (September 8, 2011).

  Also, you can view the rest of GlennS blog for more information: -.

  http://glennschwartzbergs-Essbase-blog.blogspot.in/2011/12/smart-view-patch-to-patch.html

  I hope this helps.

  Kind regards
  -SM

  Edited by: 918547 March 1, 2013 09:37

• Smart View and precision

  Hello, I have a question.
  
  Is it possible therefore mart would open with precision settings are installed in settings?
  For example, if I have the prΘconfiguration precision as '3' is it possible to open from smartview with these settings?
  
  Or the only way to precision of installation in SmartView is smartview settings configuration and these would be global for any is open?
  
  Thanks in advance!

  You seem to be hitting a known problem: Bug 12941210: SMART VIEW IS NOT TAKE THE SAME DECIMAL PRECISION that the VALUE IN THE PLANNING

  It is not yet fixed.

  HTH-
  Jasmine.

• Smart View drilldown inserts additional rows in Excel

  Question: Additional blank lines inserted on the second descent of the dimension of the lines.
  The Smart View version: 11.1.2.2.000 (Build 434)
  Excel Version: 2007 running on Windows XP SP3
  
  Aftering digging a dimension on a line of an ad-hoc query and drilling then upwards, it does not appear that Smartview 'cleans' extra blank rows on a grid on which he hasn't needed. As a result, drilling down on one another Member of the line inserts a large number of blank lines between members of drill down, a line for each of the lines of the grid not erased.
  
  A solution for this is to remove all empty lines in the grid before you drill down on the second dimension. But it's bad enough from a user perspective. Mutiple users encounter the problem. If someone has encountered the same situation and, if so, did you find a fix?

  This is a know bug. The work around is to disable "Preserve formulas and comments on Ad-Hoc operations (except Pivot)" in the options of the Member before you start to do your zoom in or out. (new listing) I suggest making it default and then having the zoom add formulas as needed.

• Get Smart View to connect to the planning

  Version is 11.1.2.
  
  I've installed Smart view using tools-> installation-> Smartview to workspace. After which opened Excel, click sharing of connections and changed the url to the < servername > correct: 19000/area of work/SmartViewProviders.
  
  After that, I am prompted to log in with my user id and password. Apparently I can connect without any problems.
  
  My question is what now? My shared and private connections pane has a menu drop-down with 'select the server to go ahead', but nothing is listed. My open-> active connections is empty. Nothing happens when updating. AND:
  
  http:// < servername >: 13080/APS/SmartView gives me a 404 error. I checked to see if Analytic Provider Services ran who it was. I restarted the service anyway, still the same issue.
  
  Also there is a difference between installing Smart View of workspace vs download and delivery facility?
  Any guidance appreciated.
  
  Published by: EssbaseApprentice on January 26, 2011 12:59

  Connect you with the correct url, smartview is no download is different from the workspace or delivery.
  This may help:-http://essbaselabs.blogspot.com/2010/04/smart-view-1112-connections.html
  You can also connect to planning with the help of a private connection - http://download.oracle.com/docs/cd/E17236_01/epm.1112/sv_user/conn_add.htm

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Smart View - refresh all

  Hi everyone, we use Smart View 11.1.1.3.00 (build 190) along with MS Office Excel 2003 SP3, and I have a question about the "refresh all". I have a user who wants to use the "refresh all" but does not necessarily have to refresh all tabs. That is to say: they want only update 17 of 20 tablets. I know that 'refresh all' allows you to scroll through an excel workbook and refresh that have previously been refreshed tabs. But is it possible that you can remove the active connection for a specific tab? The only way I know is to copy the tab which will then not have an active connection.
  
  TIA

  You can always write your own VBA version of "Refresh everything" and in your code to skip the leaves which do not need to be refreshed.

• Is it possible to display the notes database with Smart View Essbase cubes?

  Hi again all,
  
  I have another question that I was hoping you bunch of gurus might be able to help with.
  
  Like you all most probably know, it is possible to update the information on the database for an Essbase cube (that is to say, to hold relevant information like when a cube was last rebuilt or recalculated, etc.) so that to view the notes in question databases when you connect and seleting a cube Essbase using the Essbase snap.
  
  So, my question is I would like to know if Smart View is equivalent functionality to be able to read the notes of an Essbase cube database.
  
  I searched using smart view but could not find something in this direction but thought someone here might know whether it is possible to do something like that.
  
  Thanks in advance.
  
  JBM

  Unless it is in 11.1.2 (will watch these daily Readme files now), this feature is not in SmartView.

  I know you can hit him just behind the classic login window.

  I don't think this is addressable through the Spreadsheet tool box, although the old VB API has a function EsbGetDatabaseNote.

  Kind regards

  Cameron Lackpour