SMARTnet to asa5505

Similar Questions

• How to accompany the IDS in ASA 5505 and 5520?

  Dear All;

  We have the following configuration of HW for the ASA 5505 and ASA 5520, we add the functionality of system of detection of Intrusion (IDS) to the two ASA. My question is: what are the modules required to support this function, and what is the deference between IPS and IDS, fact the same Module both the feature?

  Part number:	Description	QTY.
  ASA5505-BUN-K9	ASA 5505 appliance with SW 10 users, 8 ports, 3DES/AES	1
  CON-SNT-AS5BUNK9	SMARTNET 8X5XNBD ASA5505-BUN-K9	1
  SF-ASA5505 - 8.2 - K8	ASA 5505 Series Software v8.2	1
  CAB-AC-C5	Power supply cord Type C5 U.S.	1
  ASA5500-BA-K9	ASA 5500 license (3DES/AES) encryption	1
  ASA5505-PWR-AC	ASA 5505 power adapter	1
  ASA5505-SW-10	ASA 5505 10 user software license	1
  SSC-WHITE	ASA 5505 hood SSC of the location empty	1
  ASA-ANYCONN-CSD-K9	ASA 5500 AnyConnect Client + Cisco Security Office software	1

  Part number:	Description	QTY.
  ASA5520-BUN-K9	ASA 5520 appliance with SW HA, 4GE + 1FE, 3DES/AES	2
  CON-SNT-AS2BUNK9	SMARTNET 8X5XNBD ASA5520 w/300 VPN Prs 4GE + 1FE3DES/AES	2
  ASA5520-VPN-PL	ASA 5520 VPN over 750 IPsec User License (7.0 only)	2
  ASA-VPN-CLNT-K9	Cisco VPN Client (Windows Solaris Linux Mac) software	2
  SF - ASA - 8.2 - K8	ASA 5500 Series Software v8.2	2
  CAB - ACU	Power supply cord (UK) C13 BS 1363 2.5 m	2
  ASA-180W-PWR-AC	Power supply ASA 180W	2
  ASA5500-BA-K9	ASA 5500 license (3DES/AES) encryption	2
  ASA-ANYCONN-CSD-K9	ASA 5500 AnyConnect Client + Cisco Security Office software	2
  SSM-WHITE	ASA/IPS SSM hood of the location	2

  Thanks in advance.

  Rashed Ward.

  Okay, I was not quite correct in my first post.

  These modules - modules only available for corresponding models of ASA.

  They all can act as IPS (inline mode) or IDS ("Promiscuous" mode), depending on how you configure your policies.

  When acting as IPS, ASA redirects all traffic through the module, then all the traffic is inspected and can be dropped inline if a signature is triggered.

  When she acts as an ID, ASA a few exemplary traffic is the module for inspection, but the actual traffic is not affected by the module, as it's not inline in this case.

  In addition, these modules can be both comdination. That is part of the traffic can be inspected "inline", when some other (more sensitive) traffic can be inspected in promiscuous mode.

  To better understand, familiarize themselves with this link:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/modules_ips.html

• Selection of ASA 5505 license and Smartnet

  Hello

  We bought an ASA 5505 (ASA5505-BUN-K9) and more recently bought the license to upgrade from 10 to 50 users (L-ASA5505-10-50).

  I want to provide remote access to users via AnyConnect - specifically, AnyConnnect under Windows as well as iPhone/iPad and Android.  My understanding is that I should buy the Anyconnect Essentials (L-ASA-AC-E-5505) and permits Anyconnect Mobile (L-ASA-AC-M-5505).  Is this correct?  If I do this, simultaneous remote access VPN connections (via the Anyconnect customers) how the ASA will then support?

  In addition, we did not purchase initially Smartnet with this device, but I want to do to access the software updates.  Y at - it a document or a site where I can locate the SKU # s Smartnet contracts that would be appropriate with our device?  Or could someone provide a few example SKU #?

  The output of 'see the version' is below:

  Cisco Adaptive Security Appliance Software Version 8.3 (1)

  Version 6.3 Device Manager (1)

  Updated Friday, March 4, 10 16:56 by manufacturers

  System image file is "disk0: / asa831 - k8.bin.

  The configuration file to the startup was "startup-config '.

  asa1 until dry 42

  Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor

  Internal ATA Compact Flash, 128 MB

  BIOS Flash M50FW016 @ 0xfff00000, 2048KB

  Hardware encryption device: Cisco ASA-5505 Accelerator Board (revision 0 x 0)

  Start firmware: CN1000-MC-BOOT - 2.00

  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.06

  0: Int: internal-Data0/0: the address is 649e.f3b3.c2bb, irq 11

  1: Ext: Ethernet0/0: the address is 649e.f3b3.c2b3, irq 255

  2: Ext: Ethernet0/1: the address is 649e.f3b3.c2b4, irq 255

  3: Ext: Ethernet0/2: the address is 649e.f3b3.c2b5, irq 255

  4: Ext: Ethernet0/3: the address is 649e.f3b3.c2b6, irq 255

  5: Ext: Ethernet0/4: the address is 649e.f3b3.c2b7, irq 255

  6: Ext: Ethernet0/5: the address is 649e.f3b3.c2b8, irq 255

  7: Ext: Ethernet0/6: the address is 649e.f3b3.c2b9, irq 255

  8: Ext: Ethernet0/7: the address is 649e.f3b3.c2ba, irq 255

  9: Int: internal-Data0/1: the address is 0000.0003.0002, irq 255

  10: Int: not used: irq 255

  11: Int: not used: irq 255

  The devices allowed for this platform:

  The maximum physical Interfaces: 8 perpetual

  VLAN: 3 restricted DMZ

  Double ISP: Disabled perpetual

  Junction VIRTUAL LAN ports: perpetual 0

  The hosts on the inside: 50 perpetual

  Failover: Disabled perpetual

  VPN - A: enabled perpetual

  VPN-3DES-AES: activated perpetual

  SSL VPN peers: 2 perpetual

  Counterparts in total VPN: 10 perpetual

  Shared license: disabled perpetual

  AnyConnect for Mobile: disabled perpetual

  AnyConnect Cisco VPN phone: disabled perpetual

  AnyConnect Essentials: Disabled perpetual

  Assessment of Advanced endpoint: disabled perpetual

  Proxy UC phone sessions: 2 perpetual

  Proxy total UC sessions: 2 perpetual

  Botnet traffic filter: disabled perpetual

  Intercompany Media Engine: Disabled perpetual

  This platform includes a basic license.

  ---

  Thank you!

  Yes you are right, you must purchase the license key AnyConnect and AnyConnect Mobile, and you can run 25 maximum simultaneous AnyConnect

  Here are the compatible Android devices for your reference:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect25/release/notes/RN-AC2.5-Android.html#wp1159723

  For Smartnet, whereby the service level you need, here are a few examples for ASA5505:

  -SMARTnet Premium 24 x 7 x 4 (SNTP): SNTP-CON-AS5B50K9

  -SMARTnet 8x5xNBD (SWW): CON-SNT-AS5B50K9

• Smartnet out older hardware

  Is it possible to subscribe Smartnet on older equipment? We have a CUCME on an ISR 3825 and some 3560G switches. Would it not possible to subscribe Smartnet on them?

  Daniel - the best way to determine if a device is still eligible to fix a support contract is to check for announcements of end of sale on cisco.com.  I have this look for the 3825; and it seems that the deadline of attachment of service was in October 2012. If you already have a contract, which would be honored and may be renewed through January 30, 2016.  Here is the link at the end of the newsletter of the life.

  http://www.Cisco.com/c/en/us/products/collateral/routers/3800-series-int...

  You should be able to find the same information for the 3560G on this site.

  I hope this helps.

• SmartNet?

  Hello, I am trying to get a smartnet or account something Cisco where I can legally download the ASAv961, qcow2 so I can use the SAA in my GNS3 program for studying certifiication. Spent an hour on the phone where I've been four times before being...

  Help, please

  Kind regards

  Gary

  Hello

  Unfortunately, there is no 'official' way for you to download this software without an active support agreement (costs $$$). Cisco TAC will not grant access without checking your eligibility.

• How to block BITTORRENT using ASA5505

  Hello Experts,

  I need a help. In my network I have an ASA5505 operating with several ACL for many other purposes. It is possible to block data transmission BITTORRENT uses only ASA5505? Or do I need to have any other firewall/software with ASA5505 block?

  I noticed some use of the port base by the torrent client and based on the following ACEs I created; but there seems to be no use. Because, even if sometimes the torrent transmissions are disrupted, but majorly it communicates.

  10 tcp refuse any any eq 6969 (5984 matches)

  20 deny udp any how any eq 80 (115784 matches)

  30 deny udp any how any eq 1337 (1284 matches)

  40 ip allow everything (5905084 matches)

  Please help me to me or advice regarding how do I stop transmission BITTORRENT on a full swing.

  Thanks in advance.

  Samrat Bose.

  Hi Samrat,

  So basically the firepower is firewall services the next gen offering from Cisco.

  You can run the firepower on any ASA 5500 - x. new firewall such as 5506,5508,5516 comes pre-loaded with firepower.

  For more details you can see:

  http://www.Cisco.com/c/en/us/products/collateral/security/ASA-5500-serie...

  http://www.Cisco.com/c/en/us/products/security/ASA-firepower-services/mo...

  I hope that helps!

  Thank you

  R.Seth

  Mark the answer as correct if it can help resolve your query!

• Associated account manager SmartNet contract to know

  Hello world

  I'm new to SmartNet contracts, I came to know that each SmartNet contract is associated with an account manager. How can I find the details of the account manager. Who should I contact.

  Kind regards

  ABY Laurance claudon

  This is not the case.  It may or may not have an allocated SAMT.

  I'm just trying to associate with your CCO profile and see what happens.

• Configure ASA5505 as 802.1 X Client / Wired "eduroam"

  Good evening

  I work at a local University who supports wired "eduroam". Wired eduroam use 802. 1 X EAP-PEAP and MSCHAPv2 as the second Phase.

  I wanted to ask you is it possible / and how to configure an ASA5505 like wired Client 802. 1 X on the external Interface.

  I got static IP, DHCP, and PAP, but I would need to use EAP-PEAP with MSCHAPv2 as described above.

  Thank you very much

  Nico

  The build-in switch of the ASA 5505 is quite limited. It is not possible on the 5505 to configure a switch as a port. 1 x supplicant.

• SMARTnet include the update of GIS?

  Hi all!

  I buy CISCO 3845 with Intrusion Detection System Module and SMARTnet Network.

  Can I take the signature updates or I have to get an additional contract for updates?

  Hello

  You will need to buy a contract of "services for IPS" to allow you to get updates of the signature.

  The following link has the details:

  http://www.Cisco.com/application/PDF/en/us/guest/products/ps6076/c1592/cdccont_0900aecd8022e962.PDF

  Once you have purchased the contract that you should save the serial number of the module and then you will be able to get updates.

  You can always get a trial license 30 days pending...

  HTH - evaluate so useful

  Andrew.

• Cisco ASA5505 Gigabit?

  Hi all

  Checked the POST on an ASA5505 (9.1 (3)) one it shows 2 Gigabit NIC:

  Total network cards found: 10

  88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002

  88E6095 rev 2 Ethernet @ index 08 MAC: 885a.92d9.f938

  88E6095 rev 2 Ethernet @ index 07 MAC: 885a.92d9.f937

  88E6095 rev 2 Ethernet @ index 06 MAC: 885a.92d9.f936

  88E6095 rev 2 Ethernet @ index 05 MAC: 885a.92d9.f935

  88E6095 rev 2 Ethernet @ index 04 MAC: 885a.92d9.f934

  88E6095 rev 2 Ethernet @ index 03 MAC: 885a.92d9.f933

  88E6095 rev 2 Ethernet @ index 02 MAC: 885a.92d9.f932

  88E6095 rev 2 Ethernet @ index 01 MAC: 885a.92d9.f931

  y88acs06 Gigabit Ethernet rev16 @ index MAC 00: 885a.92d9.f939

  Is there a Gigabit licenses on the roadmap?

  Kind regards

  Norbert

  Hello

  I doubt that it has nothing to do with subsequent changes, as the device is specced for only 150Mbps throughput.

  I saw Cisco release any model replacement, even if I asked a few times.

  I think that 2 GigabitEthernet interfaces refer to the internal-Data0 and Data1 internal interfaces

  It is the output of my own ASA

  The internal-Data0/0 interface ' ' is in place, line protocol is up

  The material is y88acs06, BW 1000 Mbit/s, 10 DLY usec

  (Full-duplex), (1000 Mbps)

  Internal-Data0/1 interface ' ' is in place, line protocol is up

  The material is 88E6095, BW 1000 Mbit/s, 10 DLY usec

  (Full-duplex), (1000 Mbps)

  Also, here is a picture of a Cisco Live! presentation on the architecture of the ASA5505 model (click to enlarge)

  

  Hope this helps

  -Jouni

• What is Smartnet service for license upgrade 2504 LIC-CT2504-UPG?

  Hi guys,.

  Can someone explain to me what is this service for? I have the LIC-CT2504-UPG, with LIC-CT2504-5 has (Adder 5 AP licenses) and I have no understeand what services SMARTNet this permit are?

  Are they necessary if I already have the SMARTNet service for the hardware controller?

  These services provide something extra above the service of material?

  Thank you.

  Hello

  SMARTnet Service contract:

  Reduce downtime fast, expert technical support, flexible material cover and diagnostic device intelligent and proactive with SMARTnet Service. Your personal COMPUTER has anytime access to Cisco engineers in the (TAC) technical assistance Center and a wide range of resources, tools and training.

  What you get with this contract:
  Global 24 hour access to experts in the Assistance Center (TAC) Cisco technical
  Support self-help through the online communities, resources and tools
  Options for replacement of material, including 2 hours, 4 hours and the next business day
  software updates and download cisco for your controller Web site.

  Hope you got the point :)

  Concerning

  Remember messages useful rates

• ASA5505 c/o with the resumption of the ISP

  Hello world

  I was wandering if possible the tent on the figure below.

  

  The situation is:

  At the moment there is an ASA5505 that performs switching between the two suppliers using Internet services and monitoring SLA.

  I need to add an another ASA5505 to implement failover c/o for the material, but I don't know if the ISP failover will work witht the deployment a/s.

  Could someone confirm if this scenario is valid?

  Best regards

  Jose

  Yes, I don't see a reason why it wouldn't work. He will continue to work with SLA followed because there is only 1 IP active using the ASA, and the same IP follows the active firewall.

• Get a Smartnet contract also gives you updated signature IDS/IPS?

  One of my clients is looking into getting an ASA5510 with module AIP - SSM. I realize that with IDS/IPS systems, it is * essential * to keep files up-to-date signatures. Buying me the Smartnet contract for the bundle gives updates signature files, or is there another package that I need to buy?

  I see references to the "Cisco Services for IPS", but this seems to be mainly for routers/IOS firewall/IDS packages.

  There is not a Smartnet contract for the ASA/AIP-SSM bundle.

  The only contract SmartNET SSM packages with the CSC - SSM and not the AIP - SSM.

  When buying a bundle ASA/AIP-SSM, you'll need to buy a package maintenance contract. Package maintenance contracts are Cisco Service for the IPS markets and include the support of signature for the AIP - SSM and the software and hardware in support of ASA and AIP - SSM (software and hardware support, is what it is normally part of SmartNET).

  Packages you will need to purchase a maintenance contract Service Cisco IPS using one of the formats following part numbers:

  CON-SUw-ASxAyKz

  The 'w' will be 1,2,3 or 4 depending on the level of service.

  The 'x' will be either 1 for the 5510, 2 for the 5520 or 4 for the 5540.

  'Y' will be 10 for the AIP-SSM-10 or 20 for the AIP-SSM-20.

  The z will be 8 or 9 depending on the level of encryption.

  Thus, for example:

  CON-SU2-AS2A20K9 - would be 8 X 5 X 4 support for the ASA 5520 bundled with the AIP-SSM-20 with the top encryption.

  NOTE: There is also SP contracts for purchase by service providers who follow a slightly different format.

  There are a few users who have purchased the ASA and the AIP - SSM separately.

  When purcahsed separately you would need to purchase a contract SmartNET for the ASA and a separate Department of Cisco for IPS for the AIP - SSM maintenance contract.

  Maintenane AIP - SSM contract will be in the following format:

  CON-SUw-ASIPyK9

  The 'w' will be 1,2,3 or 4 depending on the level of service.

  'Y' will be 10 for the AIP-SSM-10 or 20 for the AIP-SSM-20.

  Thus, for example:

  CON-SU2-ASIP20K9 would be 8 X 5 X 4 support for the AIP-SSM-20.

  What you find is that buying a separate SmartNET for the ASA and Service Cisco IPS for the AIP - SSM will be more expensive than buying a single Cisco IPS's Service to the ASA/AIP-SSM bundle. This is because there is a discount when buying by the beam.

• How to change the ASA and ASDM on ASA5505 questioned once

  Can anyone suggest the way to upgrade the software on the Cisco ASA5505 simultaneously both ASA and ASDM without trouble, like I just did?

  Here is what happened.  I copied the files asa821 - k8.bin and asdm - 621.bin for flash memory, then renamed the old versions like Oasa724 - k8.bin and Oasdm - 524.bin and then issued the command reload from the GUI of Windows.

  Big mistake, I lost connectivity ASDM entirely and has been obliged to buy a USB to serial port adapter and plug the cable from port of CLI command so she can return to the unit.  I found that he was running the kernel asa821 - k8.bin, as expected, but apparently the ASDM was still under the version 5.24.

  Should I have created a new folder and moved the older versions of this file, then issued the command reload system and hope for the best?

  I feel that I've defiled things upwards, I guess I have to use tftp to reload the boot image to get the ASA5505 back up again (using the ROMMON commands)

  In fact, the only way that I was able to recover the GUI of Windows used start to asa724 image - k8.bin older command.

  What is the right way to upgrade to new versions asa 8.2 (1) and asdm 6.2 (1)?

  Really, I don't want to risk losing my ability to speak with this box and I spent an anxious afternoon yesterday, when I got to the pop-up message box "can not display the asdm manager."

  ======

  After working with the CLI port, I noticed the following error:

  Set of images of Manager devices, but unable to find disk0: / asdm - 524.bin
  Out of config line 75, "asdm image disk0: / asdm-5...» »

  So apparently some configuration file must point to the correct asdm and just blindly change the files in the folder will NOT work.

  ========

  After working more with the port of the CLI and the GUI of Windows port, I found that the 'asdm image' command did NOT work in the CLI software, but was apparently working in the GUI software, so I ran this command to tell the system to use the recent 6.21 on start.

  After that and issuing the command reload of the CLI, I was able to set up successfully with the latest software of asa and asdm.

  I would like to have access to CLI is valuable in this case.

  I DON'T know why the command 'asdm image' appears inaccessible on the CLI port.

  Any ideas?

  As far as I'm concerned this problem has been resolved (using educated error)

  The boot of the ASA when he tries to use the command 'system startup' file in the config. If it is not very well this file (it was not there because you renamed it), it starts the first image he will find...

  However for ASDM ASA uses just the image you have. You were pointing to asdm5.2 and renamed, there was no valied ASDM image to use.

  In other words you must have just changed the 'asdm image"and"system start"commands in the config and point to new files, save the configuration and restart and then it would have worked fine.

  I hope it helps.

  PK

• ASA5505 does not not in the telnet session

  We have an ASA5505 in a branch for IPSEC VPN at the main office. Telnet to the ASA5505 gives a message "could not open connection to the host, on port 23: Connect failed. The branch has access to the internet. Suggestions for be telnet to above firewall would be appreciated.

  Using ssh remote acccess your ASA box is always the best way.

  You can download and install a client SSH on your PC, like PuTTY, is a free software, you can get it at

  http://www.chiark.greenend.org.uk/~sgtatham/PuTTY/

  Or if you want more powerful SSH client, you can buy a SecureCRT.

  Thank you.