Smartphones Blackberry blackBerry rings when the vibrate or silent mode

Similar Questions

• Gamepad Xbox 360 for Windows pc freezing when the vibration is enabled

  Anyone know a fix for this, whenever I have the vibration turned on for any game using the controller Xbox 360 for Windows (by cable), it freezes the game and I can't get my PC to respond again by disconnecting the controller.

  This occurs if the game supports natively the 360 controller or not.

  Games question until now:

  Dead Space
  Dead Space 2
  LIMBO
  Tomb Raider: Legend

  Deactivation of the vibration in one of these games feature solves the problem, but does anyone know a solution where I'd be able to use the vibration?

  The problem you are experiencing may be caused by the power of the amount needed when the vibration is enabled. I had the problem on my old PC, that when I used my controller, my sound would play as the speakers had holes in them and that the game would freeze-freeze-start. The Xbox 360 controllers use 500mA, which is over the limit that provides a USB port. With this audio device, a keyboard and a mouse together via a USB port, which is an aspiration constant quite heavy on the USB supply rail.
  I fixed it by getting a small USB 7 port hub which is outwardly the power (this is important) and plug my controller. This way he can draw the entire, there need without slipping down the USB ports attached to the motherboard. Just be sure it's a hub with an external power supply.

  SC Tom

• Acer liquid E2 can vibrate off the coast in silent mode

  Hi guys,.

  I have problems with my acer E2 liquid. I can not turn the haptic feedback off when I'm in silent mode.

  In settings > sounds > vibrate is turned off

  also in settings > language and input > android keyboard > vibrate on keypress is off.

  When I'm in silent mode, the bottom 3 buttons (back, home, menu) keep giving haptic and unlocking the screen. When I'm not in silent mode, all the vibrations are disabled.

  It's very awkward meetings, because vibrations are some noise.

  I hope you can help me with this problem.

  Kind regards

  Karen

  Hi Karen,.

  I had the same problem. It doesn't seem to be an option in the settings of the phone, but if you download profile Scheduler App, you can turn haptic phone in all of audio profiles. I hope this helps.

  Kind regards

  Andy

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on

• ODI-17769: OdiRef: internal ID of the SnpSession of the IObjects should not be used when the repository is in mode 12 c

  Hi people,

  I created a variable with refreshing: select '< % = odiRef.getPrevStepLog ("SESS_NO") % >' FROM DUAL

  The error Code is:

  ODI-17769: OdiRef: ID internal 261 of the IObjects SnpSession should not be used when the repository is in mode 12 c.

  Here is a solution for getLoadPlanInstance offered:

  Rittman Mead Consulting"Data Integration tips: ODI 12 c - Substitution API GUID

  based on a "non-written response" by David Allan of Oracle data integration team

  But what of on SESS_NO? Is there a "written response" too?

  Thanx

  Frank

  Hello

  Something like below:

  For example, SESS_NO = "<%=odiRef.getPrevStepLog("SESS_NO")%>". »

  try to replace it by GLOBAL_ID = "<%=odiRef.getPrevStepLog("SESS_GUID")%>." »

  If you use KMs delivered with ODI, you must replace them with their corresponding versions of 12 c.

  If you have your own custom KMs, you must either adjust your KMs to use new odiRef methods that return the GUID of the object.

  or re - upgrade their repositories to use 11 g compatibility mode.

  Thank you

  ASP.

  Please close the message it useful or response.

• Possibility of blackBerry Smartphones to have some number of rings when the phone is "off" or "quiet"?

  When I turn my phone 'off' or 'calm' ring, I'd love to be able to program the phone for that comes from any call from my wife, while all other ring at all.  Any way to do it?  Thank you

  When your phone is 'off' no call will happen, but you can have the ringtone and following will continue to apply.

  When the profile is defined for you calm down can have important calls pass: scroll to profiles > click on > scroll down > advanced > scroll down for important calls > touch menu > you can create a new exception or use the s 'important call' a > edit > add a contact in the top bar, for example, your wife, you can also choose a ringtone custom for important calls.  Now, even if the phone is set to silent or vibrate, the important call will ring through.

  Hope this helps you.

• For the profile of Smartphones blackBerry ring tones

  All new to the BlackBerry famiy and had my new Pearl for about a week, the only complaint I have for the moment is when the phone is set to vibrate + ring, it vibrates to the time set then rings rather than doing both at the same time... is anyway to get both at the same time or not?

  Mark

  There is a 3rd party software that corrects this bug called Vibandring.

  http://www.MobiHand.com/product.asp?ID=19664&n=VibAndRing

• BlackBerry Smartphones phone stops ringing when only I pick it up

  Hello

  I have a Blackberry 9720.

  1. I want to know why my phone stop ringing when I pick it up to answer?

  2. How can I me it ring any longer because she sounds for such a short time?

  Thank you very much

  Barbara

  Barbara,

  1. I don't know why what is happening but reloading your operating system using BlackBerry Desktop Software should fix this. To reload your operating system, plug your phone into COMICS on your PC and click on the device in the upper part of the COMICS, and then click Backup. Once you have made a backup, click device once more but this time click on restore and select the file that you just created and load. If you had a touch screen, I'd say you're probably touch the screen which would negate the ringtone, but because your phone is not a touchscreen, this doesn't apply.

  2-call MTN for contribution to this issue. It is your operator that controls for how many time your phone rings and they can set it to go as long as 30 seconds if you ask.

  I hope that helps you.

• HELMET No. Smartphones blackBerry icon when I plug in the BB Bold 9900 helmet. Help, please!

  Hello

  I just got my new BB bold 9900. Has updated the OS to v7.1.714. Now I see not a helmet on the homescreen icon when I plug the headphones of BB. Although I get sound when I plug from the 3.5 mm plug.

  Another issue is when I receive a call I am not able to hear the call, ringing on the headset, rather that I hear from the speaker as I would when no headset is plugged.

  I heard that it is a common problem when an upgrade of the OS is made. Is there a solution? Help, please!

  Hello crazygamerg7,

  Welcome to the BlackBerry support community.

  Thank you for your question about the helmet on the BlackBerry 7.1 software feature.

  The headphones icon should only appear in within the phone application and not on the home screen when connected and on a call.

  The ringtone will also go through the speakers of the device and not on taking 3.5 mm connected headphones. This is normal.

• BlackBerry Smartphones Blue error screen when the "BOLD" connection via port USB for Windows Server 2003

  I try to activate a new blackberry 9000 "BOLD", the first time I plugged the server he was immediately recognized and installed. I selected add new device of the user and the activation process started, but about 1 min in the activation I got a blue screen error stop 'driver of bugcode_usb.'

  After restarting the server I reconnected the "BOLD" to the server and once more Windows he acknowledged and began the installation process, this time however, the VM didn't pick it up and I had to click on VM > removable devices > usb devices to start the process of installing how he immediately provoked the stop error blue screen again.

  We run BES 4.1.4 on Windows Server 2003 in a virtual machine (VMWare 1.0.4) environment

  Does anyone have any suggestions? I don't want to plug it back for fear of crashing the BES server again.

  have you tried wirless EA?

• BlackBerry Smartphones does anyone know when the new Tour with the touchpad will never come out to VZW?

  Anyone know when the new Tour with the touchpad will never come out to VZW?

  Yes...

  9630 tour =

  9650 = "BOLD"

• Excursion to Smartphones blackBerry dropped in the water...

  Hey, I dropped my blackberry tour in the toilet for a few seconds, took the battery and separated dried both. When I got home, about two hours later, I put my phone in rice dry and it has been sitting for about two days. I took the lead by about a day and tried to start up my phone. my phone at all turns. It is completely fried? could it be just the battery? but my phone was also almost at low battery when I dropped it in the toilet. What should I do?

  Give him a full five days IN rice and no more check it out to see if it works.

  Yes, you could have fried, but maybe not. After five days, the device connected to a cable from charger from wall outlet and then replace the battery. Less than 10 minutes, you will know whether or not it is fried.

  Good luck!

• How can smartphones blackBerry I redownload the apps purchased on another blackberry smartphone?

  I want to use the id for the new blackberry smartphone blackberry, because there are a lot of purchased apps, I want to use. Here's the question: can I I just redownload them free via the new phone? Or I have to note that all suppliers of apps that my PIN CODE has been changed, so I can get a new registration code then?

  Could someone help me on this? Thank you

  Hello and welcome to the community!

  To reinstall your applications, see this KB:

  • KB17625 How to install or transfer has already purchased apps from BlackBerry App World for BlackBerry smartphone

  For more information, registration keys, see this KB:

  • http://www.BlackBerry.com/BTSC/KB18646

  In some cases, it was discovered that updates (from got AppWorld apps) require additional steps in order to install the update. If the update will not install, please try this:

  1. Homescreen > Options > Advanced Options > Applications > highlight the app > > remove
  2. AppWorld > MyWorld > Login > highlight the app (if she shows at all, in any State) > > remove
  3. Use your PC (via the mass storage Mode) or your BB (via Media > > Explore) and find all references (folders, files) to the app delete everything you find. Search the memory of your device and your press card as well.
  4. Use the link to user guide AppWorld above for re - install the app - then predict a new activation/registration key

  See you soon!

• How can smartphones blackBerry I change the color of the font of the messages?

  Hello all,.

  I'm severely lost when it Blackberry Storm to my CEO so please bear with me.

  When he sends e-mail messages to the people, the text appears in blue.  So far I've seen emails in an Outlook 2003 client interface, so I'm not sure if what is happening in other e-mail clients.

  I read virtually all "options" or "settings" category, I have found (and there is more than I can shake a stick at) and could not find anything related to e-mail fonts or font colors.

  Any help is greatly appreciated, as I'm seriously out of my League with this device.  Also, if there is additional information, I could add to help you help me please ask.

  Best, Jack

  All BlackBerry ONLY send messages in plain text, no HTML formatting (unless your fowarding an HTML previously received by e-mail). Blue is the color that BlackBerry use ON the response of type to indicate that you are in a response to the e-mail.

  And what you see in Outlook can be affected by your own Outlook settings, but has no importance.

  The email sent was the plain text, with no formatting.

• Smartphones blackBerry device as the default calendar Outlook e-mail

  I got my Blackberry at the end of February and set up my email in Outlook as the e-mail by default for the calendar of the device and have had no problem sync'ing the calendar and contacts between Outlook and the device using the Blackberry Desktop Software.

  An update of the basic Blackberry has been pushed and installed on the device recently, and since then, the device couldn't keep the Outlook email like email to the device default calendar.  Every time when it took place, one of two things happened: either that I entered on the device the appointment would be labeled as calendar item Outlook e-mail, separate from all the calendar items by default (visible in the indicator of different color) device, in which case the added appointmend cannot Sync to my desktop Outlook calendar; or all my default calendar items is attributed to Outlook e-mail calendar (the color indicator has changed to green instead of blue by default), in which case the device request to delete everything on my desktop Outlook calendar appointment when sync'ing because he could not reconcile the default calendar with Outlook e-mail calendar.

  Every time when the problem occurs, I would delete the Outlook emails (so that the unit had no default e-mail) and reinstalled it so that Outlook e-mail was the email to the device default calendar.  The synchronization works after that but only for a short while every time. Then, the problem is back.

  When I Sync the device with Outlook desktop, I also noticed that on the device under Setup > e-mail accounts, sync for Outlook e-mail Options only the "Deleted items" box and no boxes for calendar and contacts, but I don't know if that makes a difference.

  I think there must be something wrong in the recent updated Blackberry which is ruin the calendar by default when it is bound to an address in Outlook. Could you help it you fixing problem.

  Ok. The default calendar is the calendar CICAL associated with e-mail. The calendar of the device is the calendar with all the calendars, including the calendar by default, integrated into one. I get it.  KB19240 helps to explain the differences. Is KB 17992.

  I realized that 'Office' is not an option for me as the service by default because my camera is not related to any Blackberry Enterprise Server.  As long as I can remove the Outlook email [CICAL] service book to keep everything on my entire appointment in the calendar of a single machine with no calendar [CICAL] separate E-mail, I'll consider the problem solved. It also means that I have will not put in place any other e-mail or Facebook services on the device at the moment.

  Then I will watch the articles to learn more about Service books in the Knowledge Base when I had the chance.  Thank you for your help.