Smartphones from blackBerry Curve 9360 and USB connectivity in the form of media card

Similar Questions

• Smartphones from blackBerry Curve 8530 is not connecting to WiFi

  I have a blackberry curve 8530 and get a message Traoré says, "Failed to associate with the network." My Wi - Fi is not secure, but I implemented a filtering of MAC addresses. I entered the MAC address of my BB in the filter list, so it should work. I have a Linksys WRT54G2 router. My phone can see the network, but cannot connect. Any ideas?

  Hi mdishe01,

  Are you able to connect your BlackBerry to any other open network? If you disable the address filtering Mac is able to connect to the network in your BlackBerry?

• Smartphones from blackBerry Curve 8530 has stopped responding during the wipe - I'm in trouble!

  Hey Gang,

  I'm in a bit of a jam and I hope someone here can help. I searched the forum for an answer but couldn't locate one.

  I have a Blackberry Curve 8530 and he knows some from time to time to gel.

  Model: BlackBerry Curve 8530

  Carrier: Koodo Mobile (Canada)

  Software version: Bundle 5.0 1108

  I decided tonight to backup all my data and do a "Wipe of security" in the menu options.

  I selected these two options, type "blackberry" and clicked on "wipe".

  I currently have the popup on my screen that says:

  "Deleting information...".
  WARNING: do not pull the battery until the erasure is complete. »

  On top of this popup is the formidable clock Blackberry with him will hand turns around and around (like an hourglass would be on a PC when it is "thought").

  

  It has been like this for nearly two hours now and seems to not react any longer.

  UPDATE:

  OK... good news... of all kinds...

  The phone has finally turned on and proceeded to go up through the deletion process and it now on the home screen.

  Now, the only problem is that when I wiped it off, the programs that I had downloaded previously are still on the device so it didn't completely wipe it off as I intended.

  I'll try another rag and hope for the best.

  See you soon!
  Jeff

• Smartphones from blackBerry Curve 9360 completely freezes

  Hello! My blackberry 9360 curve freezes completely around. I saved an image from the web (I have about 150 + photos stored in the memory card) my phone just froze. I restarted and after a minute, it froze again, I removed the battery and restarted again, it froze again so I waited for 10 minutes but still no response. Then I rebooted again entered the controlled parameters n application memory it was 45 mb, after one more minute, he froze. So I removed my memroy card and rebooted again n did nothing for a while, I checked it n it froze again on the main screen. Help please! bought 6 months ago

  There are two things to try. One is to see if the problem is maybe the memory card. I think you tried and it always froze on you, OK? If it freezes only with the memory card, it may be due to a problem with the memory on the card are corrupted. In this case, I save all the images, etc. on your computer and then to reformat the memory card.

  If this isn't the problem, then it may be worth your while to reload the software on the device. You can do this by using the method described in the following link: http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...

  Hopefully one of these options, you will have up and running smoothly. If this isn't the case, since the phone is only 6 months old, you can also take it to your carrier for warranty repair.

• Update of Smartphones from blackBerry Curve 9360 - lost all ringtones

  Hi all

  yesterday I updated my BB Curve 9360 to software version 7.1 Paket 2814.

  Unfortunately I lost all my standard ringtones and I have found no solution to get back them. The only way is to buy new.

  Does any body know a fix for this?

  Thanks in advance

  Concerning

  Ingo

  If you like everything about the new operating system but miss ringtones of your previous operating system, I suggest doing a search for "download ringtones BlackBerry OS6" (or whatever OS you had). I know that CrackBerry has always a selection of ringtones to download along with instructions to do so.

  I hope that helps you.

• Synchronize the Smartphones from blackBerry Curve 9360, questions and information

  Hi and thanks for this area.  I just got my new 9360.  It will only allow me to sync my Outlook.  The prospects are great, but when I read, and then delete the messages on this subject, the curve, it will not remove them as it does, today, if I read them in Yahoo?

  Also, is there a way/method/configuration I could enjoy making Outlook the problem explained above...

  Sincerely, Mike

  Hello

  There is no direct synchronization between your BB and your client Outlook PC. Instead, each is synchronized, for what he is able, against your mail server.

  For your BB, synchronization between him and the server is governed by the present:

  • KB05133 Features of the BlackBerry Internet Service email reconciliation

  For your Outlook synchronization depends on how you have your Outlook integrated to your server. If POP, then deleted item synchronization does not occur when an item is deleted from the server (which is where it will be deleted when you delete your BB). If the IMAP, then it must synchronize deleted on the server on your Outlook items.

  Good luck!

• Smartphones from blackBerry Curve 8900 and different alerts

  How can I set different ringtones for different functions on BB Curve 8900?  I downloaded ringtones, but you can select only one at a time for the phone.  I also want one for e-mail, SMS text message. Thank you!

  Go to profiles > up to advanced > press the menu button on a profile > edit > change everything you want and add a ringtone for this feature.

• Smartphones from blackBerry Desktop Manager does not connect with the storm

  Help - I have my head in half way inside an oven gas in despair.   I tried to get on my PC BlackBerry Device Manager to recognize my Storm for a week now.   I uninstalled and installed a trillion times without change.   I tried the USB key in a number of different sockets.   Today, I got my Storm at the phone store.   Their PC instantly recognized the storm using the same USB cable!   Can someone please tell me what is wrong or how I can fix this problem without a hammer?

  What the! *   He worked and immediately synchronized with all my Outlook stuff!   You saved my BB a dead certain violence - thank you very much.

• The Smartphones from blackBerry Desktop software will not connect to 9700 Win 7

  Recently, I lost my 9800 "BOLD" and had to go back to my old 9700.  When you try to resynchronize the 9700 for the desktop software, it started the process but then stopped.  Now the software connects to the device even if the device shows connected to the desktop computer.  In addition to the software crashes and cannot be closed.  I tried to uninstall and reinstall the desktop software but no improvement.

  Any ideas.

  Thank you

  Peter

  Interesting... the only time wherever I got a message like that is when I am attached to my PC and using the AppWorld on the web from my PC browser... a plugin is installed on the PC so that it works. I never recall a message as you describe directly from the desktop software.

  There is no need to use the older Desktop software... in fact, under Win7, it is even probably not supported. So, now I suggest the following steps (reboots insert a lot of restarting your PC... not only restarts, but at full power down). In addition, it is recommended that you are connected to the PC on an account with full administrator rights. In addition, under Vista/Win7, use the option "Run As Administrator" for everything.

  In addition, it was also reported that when your user profile on windows (type "echo %UserProfile%" in command prompt) contains spaces, then the installer will not work. To resolve this issue, log off from your Windows account and sign in using the local administrator account (or any other name of account without spaces) and install office (for all users).

  (1) delete your package to update device OS of your PC (Add/Remove Programs)

  (2) properly uninstall the RIM desktop software:

  • KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
  • Some noted that there are several registry keys to remove talk in this KB... don't forget to get your all associated with RIM registry database
  • Others have reported the use of a registry cleaning tool to be also useful
  • Still others have reported the use of your original PIM (Outlook, NOTES, etc.) Installation CD, run the "repair" to be helpful in some situations process

  (3) obtain a new download of the RIM Desktop software:

  • http://us.BlackBerry.com/apps-software/desktop/

  (4) to download a new copy of your package to your carrier OS device (on your PC):

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  (5) install the software on your PC Desktop

  Installation of 6) (also on your PC), device OS package

  (7) start the configuration Organizer:

  • KB17022 How to configure applications to Organizer for synchronization using BlackBerry Desktop Manager
  • KB23681 How to configure settings to synchronize Organizer data using BlackBerry Desktop Software 6.0

  If all goes well, who's going to make things again.

  Good luck and let us know!

• Smartphones from blackBerry Curve 9380 - gel/pause

  I've had this phone for nearly 18 months without any problem, but last week I almost he threw out the window!

  For starters, he did pause for a few seconds, making send SMS, e-mail etc very frustrating! You might be texting, and then it is paused on everything that touches your tent to support on, then will take between 5 and 20 seconds to come for herself. Sometimes when I unlock or just try to navigate the phone - its fustrating Yes aswell!

  And then yesterday and today, the battery had drained by noon, although he had been accused of the overnight! I rebooted my phone at noon today, and its once again once drained (18:20)!

  They relate, or if my phone died?

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charged battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  You can also try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• Smartphones from blackBerry Curve 8520 - back from repair - unlocked in the Pocket - forced threaded messaging

  Just another curve to replace my one broken and the operating system has been automatically updated. Here are my big two (of many) questions:

  -Silly - mute button

  I can't help but feel a phone unlocks as you put it in your Pocket is a bad design. Can I please have a way to stop or reassign the button mute? I almost always hit when pushing my phone in the Pocket.

  No, I don't want to put a password, as I would forget it, and no I don't want to pay for a big dopey look awkward case.

  I do not see why I we are not allowed to go back to unlock with star-appeal as previously.

  -Forced threaded Messaging.

  I never liked this option and not only that, but he started crapping already upward, and prevents me from show ALL messages from a person sometimes until I battery restart everything.

  Can I please have a way to go back to the thread of e-mail, to 'normal', or at least "half threaded? I don't like the look of MSN. Pure and simple.

  I HAD the oldest operating system before he fell, but there is no way to reduce the repair one.

  Hi, I recently had this software but I upgraded myself to my netbook, it would be easier and simpler, but I didn't like it. so I went down there myself once again, all you have to do...

  first step, you have the blackberry desktop software on your pc? If so click it and connect your phone to your pc by usb port. When you have done that it should connect you, if you have a password on your mobile phone for example go main menu type that in, otherwise, do not to worry the software you want to get off at is v4.6.1.314 click the device on the upper left corner, options of the device and must say update click that and it will tell the software that you have updated and one you updated since, if you click on the update of v4.6.1.314 that you had before, then press update, it will start automatically making the v4.6.1.314 version, do not take your mobile phone to any process. It could take up to 30 minutes. IV of hope has helped you!

• Smartphones from blackBerry Curve 8530 stuck on reboot

  I have a curve 8530. This morning he updated an application and went to restart, and now it is stuck at 2/3 of the way to reboot. Can I do to solve this problem?

  Really, the battery for five minutes, replace and try from the restart.

  Is to let rest for awhile when it hits the 2/3 mark... after 15-20 minutes, if not go away... then read below.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• Smartphones from blackBerry Curve 9380 - battery drain after loading software updated BlackberryID

  I have a Blackberry Curve 9380 with software v7.1 2931 Bundle (v7.1.0.1098) when you open the browser of th, I had "unhandled exception: the bridge has been destroyed." I loaded the latest (software BlackberryiD

  net_rim_bbid_daemon v7.3.1.11) and this fixed the problem of browser, but battery now from 100% to 0% in about 4 hours. Previously a full charge lasts about 3 days.

  Someone encountered this or can recommend a solution?

  Thank you

  Chris

  CHRISALIS wrote:

  Someone encountered this or can recommend a solution?

  CHRISALIS, try this first... with your 9380 connected to the wall charger and BlackBerry power, remove the battery and reinsert it to restart. This will often reset the battery meter on the device (which over time can become out of sync with the actual load of the battery). You may need to try this over a few times the next day and the next.

  Don't let not your battery to flow all the way to 0-10%, top it off during the day when you can, even for 15 minutes.

• Smartphones from blackBerry Desktop Manager does not connect to BES

  Hello

  I'm trying to connect a BlackBerry (device or Simulator) via USB for our BlackBerry Enterprise Server (BES). He worked for another instance of a BES and also a BES express test. We are using Microsoft Exchange. So I have a couple of Outlook profiles. When you start the Desktop Manager, I select the profile according to the connected device. Communication between the Desktop Manager and handheld works well. The only problem is the connection to the BES.

  Device Manager displays under bridge "Connecting" (somewhat similar, it is not executed in English) and the name of the server is "srp.eu.blackberry .net: 4101. Then it tries to connect to the internet instead of the local server for BlackBerry. With other BES servers he was always showing the IP or the local name and the connection was set up immediately. Unfortunately at the moment I have no other BES to connect to.

  I searched my local registry for the parameter in the Office Manager, but just under HKEY_CURRENT_USER\Software\Research in Motion\BlackBerry\PINData of the correct (as S12345678) serviceUid of our local BES server. My problem is, I don't know how this serviceUid is mapped to a server name.

  Our license to a BES 4.1 which has been updated to a 5.0, there may be a few old settings that block the communication.

  Question: whence the Device Manager get the address from which it connects? It appears in the Exchange? Or in the BES (global or with the user)? Does the Desktop Manager searches for the name itself?

  PS: Desktop Manager 5.0.1.42 (25 Sep 2010), 6.0.0.13, BBDevMgr 4.1.0.14 Device Manager

  Finally, I found the solution! It's pretty simple if you know where to look:

  '' Cause. ''

  Routing server (RPS) Protocol address was listed as a server name. The host router only accepts connections from localhost. »

  KB18489

  In the BlackBerry Administration Service you should check the settings of the PRS. This is in the instance of the component dispatcher. In the section "RPS addresses" is only the value 'localhost' authorized. Someone here enter the name of the RPS server. Now when I enter just "localhost" the device series (by USB) works again

• BlackBerry Smartphones update Blackberry Curve 8310 and lost all data

  Help, please!

  I received a text message that I needed to update my Blackberry Curve 8310 4.3 (I think).  I went to my computer and connected to blackberry.com and did the update.  The message then said that I had to update my Desktop Manager.  I've done both.  But she erased ALL my contacts and data.  No emails and worse still no address. My screen is completely different.  My Office Manager was not my old data.

  It was a bad day, has laid off and now all my contacts are gone.

  If someone knows a way to retrieve my contacts, I would be very grateful.

  Hallelujah!

  It worked!  It's a good day, found the RPI buried on the disk and retrieved.  I must somehow be saved from a month ago.

  Thank you!!!