Smileys in code tags

Similar Questions

• What is this security code tag I found in the box?

  Then I just ran an optional update on my Pro tablet, and as he ran, I went to do other things on my desktop.

  After awhile, I noticed that the screen of the tablet was turned on, but dark blue/grey.  He was stuck!  I finally came back to life by pressing the power button for 10 seconds.

  Which leads to this question.  I was looking for my manual, which I haven't found yet, but in the process, I found a kind of label plastic in the area of the tablet.  It is said scratch safety code and indicate it to www.t3315.com.  I never saw this before tag.  Never, I entered the security code.  What is it?

  

  Nice

• Error "unallowed or dynamic code tags" on a page without these...

  Hello

  I am using InContext Editing to a few sites now and my customers have been very happy with it, but I have a new site that has problems on a single page.

  http://www.windhampilates.com/index.php

  I activated the ice on the text under the main photo boxes and navigation bar, as I have on other pages. There are a few scripts that run on this page, but the only difference on this page with the rest of the site is the rotating image at the top of the page.

  Ironically, I used this same script on the previous sites where I used the ice and they worked without any problems. Am I missing something?

  Really appreciate your help!

  -MaryAnn

  Hello 108degrees,

  Remove the HTML code commented out in your editable regions. They are unallowed tags which cause the error.

  This has been discussed in a previous thread here: http://forums.adobe.com/message/2287299#2287299

  InContext Editing returns this error when a comment in an editable region contains HTML tags. Our engineering team is aware of this problem with comments that contain html tags and work on a resolution. I apologize for the inconvenience.

  Best regards

  Corey

• Pre and Code tags buttons...?

  I asked about adding buttons for code and pre before tags (must have been one of the recently deleted posts, or search is broken or something) and said that it was planned for the next version of Jive.
  
  Unless I'm missing something obvious, it looks like these buttons (I was expecting to be next to the bold, italic, underline, buttons etc) have not been included in the latest version. No way they are?
  
  Published by: Boneist on August 24, 2008 10:59

  Was it me or the
  {noformat} no {noformat} format
  does not work very well now?

  Alessandro Bye

• How can I force < pre > (or [code] bbcode) tags for the return to the line?

  I recently spent 12 Opera to Firefox.

  I use the world of Warcraft UI and Macros forum a lot and I use the {code} tag when posting scripts or macros.

  In Opera, {code} tags would be word wrap nicely, allowing me to see the whole code block;
  http://i.imgur.com/AhJJwHH.jpg

  However, in Firefox, the {code} tag not dress and gives me a horizontal scroll bar;
  http://i.imgur.com/CC6nwSi.jpg

  How can we force pre or {code} tags to word wrap in FIrefox? I guess I could get around this behavior with the CSS styles, but I'm a complete noob to how to start even with that. A tutorial step by step would be best.

  Thanks in advance.

  Then, you add the selector code as well.

  code, pre {
  white-space:pre-wrap !important;
  word-wrap:break-word !important;
  }

• Support for tag bb code

  Would be nice if this Council took in charge the tags [code] [/ code] that support most of the other Board for the display of small pieces of code. For example, an itterator on a table like [i] is interpreted as the code in italics on this forum. Code tags would take care of this issue.
  
  Concerning
  
  Z

  Hi Z,

  Fusetalk forums are installed to display HTML code examples, but I agree this table examples with 'i' as an itterator might produce incorrect results. Please try one other than 'i' iterrator which is not be converted to HTML. When the Labs forums move to Web Crossing, you will receive a code only box that will allow you to enter something without which it is transformed into something unexpected.

• Tag documentation bug

  Hi all

  just found a bug in CVI 2013 sp2.

  I have a function with a variable number of args:

  void Secure (const int main,...) { ... }

  I started typing on it:

  HIFN whatever
  
  HIPAR main / something
  
  HIPAR... / others
  
  HIPAR... / more
  
  

  ... And CVI crashed.  Twice.

  Hello, gdargaud!

  The crash you experienced are caused by the fact that the CVI is incapable of managing the incorrect use of the HIPAR jointly with «...» "variadique parameter string name, when he tried to generate navigation information.

  The problem is filed under bug ID #514226 and will be fixed in a next version of the CVI.

  Meanwhile, the best solution for this problem is one of the following:

  1. Avoid using incorrect construction / / / HIPAR... during an attempt to specify the documentation for the variadique parameter string, when the generation of navigation information is enabled in the CVI ADE.
  
  
  2. Note that this generation of disabling navigation information ("Set Options" "generate to the browse Source-information Code" policy environment"of information to browse for disabled), when this incorrect construction is present in your code, won't cause CVI crashing.
  
  
  3. From 2013 of CVI, you can specify a string of documentation for the variadique parameter, using the tag documentation HIPARV . See the topic Documentation of Source Code Tags in LabWindows/CVI help for more details on how to use that tag documentation or others.
     String param/Param documentation HIPAR.
     String argument HIPARV variadique documentation.
     Sub func (int param,...) { }

  Best regards!

  -Johannes

• Decode the smileys in ActiveRichTexhField

  How to decode the smiley on ActiveRichTextField?

  On the API, it says:

  getText

  Retrieves the string of text in this field.

  If smilies exist in this area, this method first "decodes" and then returns the result.

  is there a function which can be override to decode the smiley? because I have ActiveRichTextField with the emoticons (Smileys) on it and when im copying the smilies I want back the smileys/emoticons code to the Clipboard.

  

  I found the solution in replacement of the selectionCopy and selectionCut and to treat the captured object

• Script to extract the code of the package (coil)

  I wrote the following code to the code in the package of the coil. However, at the beginning of the file put on hold the SQL statement is coming. I want to get rid of him.
  

  SET LINESIZE 32000
  SET PAGESIZE 0
  SET TRIMSPOOL ON
  SET ECHO OFF
  SET FEEDBACK OFF
  SPOOL D:\test.txt
  
  select text 
  from dba_source 
  where name='TEST'
  and type='PACKAGE BODY'
  and owner='PMP'
  order by line;
  
  SPOOL OFF

  Run as a script.

  Save your code in a file, spooltest.sql.

  Then, run it like this:

  SQL > @spooltest.sql

  BTW, code tags must be lowercase.

• fix code

  Hi all
  
  I can not able to run the following code in MAPPING and it gives me the syntax error in line 1. I could not able to find what's wrong with the code... Please correct me
  
  If left (API. POVMgr.PPOVPeriod, 3) = "JAN" or
  Left (API. POVMgr.PPOVPeriod, 3) = "February" or
  Left (API. POVMgr.PPOVPeriod, 3) = "MAR" Then
  Result = "1 q _" & Right (API. POVMgr.PPOVPeriod, 2) & "_" & varValues (39)
  
  ElseIf Left (API. POVMgr.PPOVPeriod, 3) = "APR" or
  Left (API. POVMgr.PPOVPeriod, 3) = 'MAY' or
  Left (API. POVMgr.PPOVPeriod, 3) = "JUN" Then
  Result = "2 q _" & Right (API. POVMgr.PPOVPeriod, 2) & "_" & varValues (39)
  End If
  
  I should get my output like 1Q_11_(my data) or 2Q_11_(my data)
  
  
  Thanks in adv!
  
  Edited by: 888755 November 17, 2011 01:23

  The if statement in your code must appear either on line or use the designation of underscore line continuation.

  To validate code listed in the FAQ code tags.

  If Left (API.POVMgr.PPOVPeriod ,3 ) = "JAN" or _
  Left (API.POVMgr.PPOVPeriod ,3 ) = "FEB" or _
  Left (API.POVMgr.PPOVPeriod ,3 ) = "MAR" Then ...
  
  - or -
  
  If Left (API.POVMgr.PPOVPeriod ,3 ) = "JAN" or Left (API.POVMgr.PPOVPeriod ,3 ) = "FEB" or Left (API.POVMgr.PPOVPeriod ,3 ) = "MAR" Then
   
  

  Kind regards
  Robb Salzmann

• Is your DW closes when does expand collapsed code?

  Is it just me? (since the DW CS4 and through 3 different computers)

  Steps to reproduce the bug:

  1. reduce some code

  2 IDK exactly. Normal use for example:

  • work for awhile,
  • I guess that documents switch,.
  • detach the tabs windows,
  • Select text,
  • copy paste
  • Find/replace in the text reduced
  • etc.

  3. try to extend the code collapsed by double clicking it

  Results:

  If you select the tag and move it elsewhere, it is not very likely expand by double click (a few characters additional invisible is selection?) and you must deselect and re-select-the so that it expand.

  If you're lucky, it will not crash. BUT IT PLANT VERY annoyingly OFTEN DREAMWEAVER.

  Expected results:

  Double click on the collapsed code tag should to develop, not to crash the entire application!

  Years ago, I thought it was my fault, by deleting 'notes' of my site folders directories, but now I can say, it happens without even touching on these issues.

  Hi thank,

  Can you please try restore preferences | Dreamweaver CS6, Dreamweaver CC

  -Devendra

• How to translate the tags for CFScript

  I want to use CFScript 'pure' in my code. There are a lot of problems.

  Tags: < cfinclude to cfscript include

  Tags:

  < cfswitch expression = "#REQUEST. Attributes.Go [1] #">"

  < cfcase value = "error" >
  < cfinclude template="./content/error/_index.cfm"/ >
  < / cfcase >

  < cfcase value = "Pick-up" >
  < cfinclude template="./content/pickup/_index.cfm"/ >
  < / cfcase >

  < cfcase value = "Send" >
  < cfinclude template="./content/send/_index.cfm"/ >
  < / cfcase >

  <!-by default at home. ->
  < cfdefaultcase >
  < cfinclude template="./content/home/_index.cfm"/ >
  < / cfdefaultcase >

  < / cfswitch >

  It works well

  cfscripts:

  < name cffunction 'include' = >
  < cfargument name = "template" >
  < cfinclude template = "template # #" >
  < / cffunction >

  < cfscript >
  switch (' #REQUEST.) ("Attributes.Go [1] # ')
  {
  ("case"error": include("./content/error/_index.cfm ");
  ("case"Pick-up": include("./content/pickup/_index.cfm ");
  ("case"send": include("./content/send/_index.cfm ");
  ("default: include("./content/home/_index.cfm ");
  }
  

  not work well.

  PS: above code (tags) from project eCards Nadel.

  can someone help me? Thank you!

  You need to read the docs:

  Using switch and case statements

  http://help.Adobe.com/en_US/ColdFusion/9.0/developing/WSc3ff6d0ea77859461172e0811cbec0a0e0-7fdf.html #WSB69283B9-CA98-4fdf - 95B 2-80665F57BC82

  Note that the BOX blocks must end with a BREAK.

  In addition, when you ask a question, say something 'wrong' is not much help: you must say how something does not work, for example: it causes an error, or if you see something you didn't expect, etc.  Otherwise, it's a little ambiguous.

  --

  Adam

• I get this when I go back on bottom of e-mail &lt;!-/ * font definitions * / @font-face {font family: "Cambrian and more"}

  Step 1 - I copy and past a word doc to a mail merge from word in thunderbird.

  step 2 - I cut and paste the e-mail address and the subject

  step 3 - at the end of my email, I can go back and get the following (dump)

  It is part of the horrible bloated code that generate Microsoft products. When go you back, I assumed that you remove the closing tag, and everything not merely appears verbatim.

  I think that if you really want to use this procedure to generate your hardware, you can use something that reveals the hidden code so that you can navigate more accurately. I use paper, which provides a useful HTML code view window. This would allow you to move your cursor outside of the closing of the pasted code tag.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/stationery/

  So, why go back?

• How can I add infolinks to my Web site?

  I'm trying to integrate infolinks into my Web site. These are the directions, but it does not work. How can I add infolinks to my site?

  • Go to the source code of your Web site
  • Paste the code just before the closing at the end of the code tag.
    If you are using Google Analytics, we recommend that you add this script just before your Google Analytics script.

  This has nothing to do with installation, upgrading, and activating Windows XP. Google for a web designer forum. Or ask the people to support site that you got the information.

• SFC/scannow unable to repair corrupted files

  Separated from this thread.

  SFCFix version 2.4.3.0 by niemiro.
  Start time: 2015-05-04 22:05:24.129
  Microsoft Windows 7 Service Pack 1 - amd64
  Do not use a script file.

  Self-analysis:
  CORRUPTED: C:\windows\winsxs\wow64_windowssearchengine_31bf3856ad364e35_7.0.7601.17610_none_dbd0d3376679543d\mssrch.dll

  SUMMARY: Some corruptions could not be fixed automatically. Ask for advice at sysnative.com or assistance.
  CBS & SFC total detected corruption County: 1
  CBS & SFC total number of corruption without importance: 0
  CBS & SFC total fixed corruption count: 0
  Total SURT detected corruption count: 545
  Total number of corruption without importance SURT: 0
  Total SURT fixed corruption count: 0
  Self-analysis: directive completed successfully.

  All the directives successfully treated.
  SFCFix version niemiro 2.4.3.0 is complete.
  Currently the storage 2 contrast.
  End time: 04-05-2015 22:07:13.239
  ----------------------EOF-----------------------

  Thanks Dustin.

  This will repair the damage detected by SFCFix:

  SFCFix Script

  Warning: this solution is specific to the user in this thread. No one else should follow these instructions, because it can cause more harm than good. You wish to book assistance, please start a thread of your choice.

  1. First thing is to SFCFix from where you previously downloaded to your desktop.
  2. Download <> ved by moderator > and save it to your desktop. Check that this file is named SFCFix.zip - it does not rename.
  3. Save all open documents and close all open windows.
  4. On your desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip to the SFCFix.exe file and then release it.
  6. SFCFix will now process the script.
  7. Once completed, a file must be created on your desktop: SFCFix.txt.
  8. Copy (Ctrl + C) and Paste (Ctrl + V) the contents of this file in your next post for me to analyze please - put [CODE] [/ code] tags around the newspaper to break up the text.

  SFC/SCANNOW

  1. Click on the button. Inside the search box, type cmd
  2. Make a right click on CMD => choose run as administrator
  3. Inside the command prompt windows copy and paste the following command SFC/scannow
  4. Please wait for it to end before continuing with the rest of the steps.

  Convert CBS.log CBS.txt

  1. Click on the button => inside the search box copy and paste the following command:
     cmd /c copy %windir%\logs\cbs\cbs.log '% userprofile%\Desktop\cbs.txt '.
  2. Press Enter
  3. Once this done please go to your desktop and you will find CBS.txt, please rename this file in .txt _ {insert todays Date here} CBS_ {Insert forum username here} for example 'CBS_Go The Power_1803.txt'
  4. Please download CBS_ {Username} _ {Date} .txt via Dropbox or a disk and share the link in this thread.