Social media links work only from office?

Similar Questions

• Social sharing links work only not in v26

  We recently rebuilt our app for iPad only v25, v26 with Universal for the web viewer. In our version, v25, our social sharing has been installed and worked perfectly. For some reason, now that we have the v26 version, all our sharing links go to our redirect URL only.

  
  I've seen a few questions about the forum on the "renditions" and naming. If anyone has experienced this? I rechecked and social sharing is enabled in the App generator and Admin account in the box. We use WoodWing publishing so everything is and was not protected by default. This is one of the addresses that it provides:

  http://millennialeye.com?WV=s%2FMillennial%2520Eye%2F13e831a3f9a54b87a0d0669b4a9697d5%2Fco m.brynmawr.millenialeye.ipad%2F114.html

  You have no need to rebuild the app deleting URL accommodation should take a few minutes to take effect.

  Use the hosting URL only if you create a web viewer built-in.

• Last update adds a new tab with social media links to the exsisting homepages. How can I stop this?

  When I open Firefox, my home pages (4) shall, after a slight delay, a new tab appears with links to social media and the new tab is active. I want to stop the new tab to open!

  Uh-oh, you may have installed a non official package containing the update. If your download history indicates the source, can report you here?

  Your "more system details' shows the extension MySearchDial. I recommend you to remove that from the addons page (if possible) or from the control panel.

  Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Then find MySearchDial and remove (or at least turn it off).

  If necessary, open the Control Panel, uninstall a program, then click on "installed on" heading of the column to bring recent infections, uh, additions, upward.

  Hopefully he cleaning?

• E-mail blackBerry Smartphones and social media links

  I have a BB Style 9670. Yesterday, after you fix an automatic start/stop the problem, I can connect is more to links in e-mails or social media. My internet connection and a browser work fine

  Hi and welcome to the forums!

  Try traction base battery or "hard reset".

  Thank you

  Bifocals

  No data will be lost when you do the following: remove the battery while the device is activated.
  Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.

• Express media player works only on P100-213

  In my satellite p100-213 MediaPlayer express does not work correctly. I have a lot of pixels on the screen and when I run the audio cd, it does not work. I reinstalled the express media player, but it still does not go. Any idea? Thx for all.

  Hello

  I guess the express Media Player worked properly, but you should know that this drive doesn't support them all!
  Moreover, it's not the media player express if the film has a lot of pixels or not.
  It depends on the film format. However, I imagine that you don t have correctly installed the express media player.
  Check out this forum how to install and manage the express media player. In this forum, you will find many useful comments.

  I also found this Toshiba Info page:
  http://support.toshiba-tro.de/KB0/TSB6401G5000HR01.htm

  So, now everything should be clear.

• British Colombia blog links work only not in mobile view

  The site is http://www/tuckermarcom.com/blog .

  Someone with experience with links not working do not in your blog Business Catalyst, specifically in a mobile view?  I have a responsive model that uses the blog module, but for some unknown reason, the links inline in the blog simply do not work (not type) while in the mobile display (like an iPhone).  The blog titles, link to it is the landing page and system of links work well - it is the I added links that seem to have the question.  Any help would be greatly appreciated!  Thank you

  The hotfix allows the pop up in the General settings of the iPhone.  Minor correction - great results.

• Subfolders of links works only half

  I made a Web site: www.htcbreda.nl and subfolders.

  I also did the links manually with links as http://www.htcbreda.nl/huidaandoeningen/acne.html

  But only half of the links do not work.

  All items from menu below www.htcbreda.nl/huidaandoeningen work well.

  But all the elements below www.htcbreda.nl/behandelingen, www.htcbreda.nl/products, www.htcbreda.nl/contact etc. do NOT work.

  I can see in Muse that the links are good, but I can't see in the browser: http://www.htcbreda.nl//brandwonden-nazorg.html and who does not.

  In this example, it should be http://www.htcbreda.nl/behandelingen/brandwonden-nazorg.html , but this right does not export Muse.

  I've done everything; deleted all of the ftp site, put it again on the ftp, erased the whole site again and put the site online via ftp Muse...

  Of course allowed the cache of the different browsers that I use...

  But I don't see what is wrong... I hope someone can help me!

  I solved it in fact, but not on the path, I wanted. I would create submaps for the www.htcbreda.nl/behandelingen/brandwonden-nazorg.html instance and not as it is now: www.htcbreda.nl/brandwonden-nazorg.html...

• Dynamic links works only when the AE project is open

  Whenever I start my project to create, all my images load, but where there is a dynamic linked after effects composition I just get the yellow "media Meanwhile chart» If I try to recreate a link to these compositions to the original after effects project (there is only 1 project with comps about 7 inside), first simply freezes, and my only option is to force quit it.

  If I try to reimport that after effects project that it freezes and I have to force to leave. I tried to create another after effects project with just a simple piece of text in 1 composition and then import and sometimes with the dialog "Import after effects compositions" but then there is simply nothing but show progress who never does anything bar a "connection to the server of dynamic links".

  On other occasions, when I try to make a shape any dynamic link import first just freezes and I have to force quit. It seems to be a problem for me with dynamic link, which has happened recently. This may be due to an After effects Scripts, I recently installed? Can they affect dynamic links?

  SOLUTION: I found a solution, but it is not ideal in case I've had several after effects in the first projects. I can open the 1 after the effects of the project first, and then when I opened the first links to the project and the individual compositions seamlessly. BUT if I close after effects project while still in first, first freezes and I have to force it to quit. If something is terribly wrong with this project.

  Okay, I think I found the solution.

  First of all, I went through and deleted a third after effects scripts/Script UI panels/third party plugins to see if that was causing problems. I then tried again and found that it still had the same problem, so it wasn't because of that.

  I then found someone in a forum that said deleting the folder Adobe containing positioning preferences and other things found in the documents of the user. I deleted it and as I forced quit 2 process of "aselflink" which seems to be running in the background. I also deleted my preferences AE holding Option-shift on the after effects startup and launch of the first.

  A combination of all that, now a dynamic link is working smoothly again. I go to a time not so crucial for my current project finished, reinstall the scripts etc and make sure that it was not caused by them.

• 4.2 - column link works only with interactive report (IR)

  Greetings-
  
  I have a screen with an interactive report (IR) and a tabular report on it. There is a radio button used to switch between them, of course, both of them have conditional logic based on this button. If the tabular report is the default value, everything works fine. If the interactive report is the default, then the 'link' on the IR used to display single details comes in white.
  
  Note that if the IR is by default, but you switch to tabular and then back to IR before trying to put in place the single record view, fine. It's almost as if something is not be instantiated unless the table view is loaded.
  
  The option button and the two reports are in the same region.
  
  Anyone has any idea on this?
  
  Thank you
  Scott
  
  Published by: DenverScott on April 30, 2013 09:14
  
  Published by: DenverScott on May 2, 2013 05:31

  OK, I looked inside. It is a common problem, but you have reached a particular example of this, because it seems that you need not the value of P2_REPORT_SELECTOR in your SQL for IR.
  BUT do you it because you have on your health.

  So, there are two simple ways to solve this problem. As I mentioned previously.
  1. you must fill in the field "Page elements must send" in the IR with P2_REPORT_SELECTOR
  I did it.
  What it does it does the value of P2_REPORT_SELECTOR available in persistent session state so that the AJAX call can seen that the condition is met and that the report should be displayed/rendering.

  2. the other option is a calculation on P2_REPORT_SELECTOR who rule on 1 when P2_REPORT_SELECTOR is set to null. I left this calculation, but it set to never right now. It's the same effect net because calculations save values to persistent session state.

  Without the value of P2_REPORT_SELECTOR to persistent session state, the value is only in memory during rendering. That's why the page renders correctly. BUT so that the report to switch to the display of the page one needs to know the value of P2_REPORT_SELECTOR and the value was NOT in permanent session state, therefore not available for the AJAX call, which updates the State.
  Same thing when VC has been sent, it saves the value of P2_REPORT_SELECTOR in persistent session state. Same as switching the button radio.

  I hope this help out you.
  -Jorge

• Navigation bar links work only in Internet Explorer 7

  Hey people.  I have a site where he looks a lot like IE 8, Mozilla, Chrome, and Safari, but not in IE 7.

  
  The site is for an annual conference and I know that dozens of people who are going to be displayed to the site using IE 7 with no intention to upgrade.  Even my company uses IE 7 and that's how I learned this morning that the site works in it.  And then panic the value in... lol.

  I am actually trying to find a workaround for the real site right now... so this link below is actually on the partially completed test site, I've been working on until I finished it and it flies.

  I DON'T know how to code HTML... so I think with a possible workaround.  I don't want to have Javascript code tries to recognize the browser and sending people to IE7 to a slightly different site... but if it's the only way, then it will have to do.

  http://www.hellzabeth.com/index.html

  Any ideas?  I've already called the helpdesk Adobe and they have not an idea... told me to throw it here and see what happens :-)

  Hello

  You have two image empty frames on the master page covering the elements of two image albums. It is very likely one (or two) of these frameworks have also been covering the major part of your horizontal menu of your previous version (which was blocking the mouse clicks in IE7).

  You can find either select all (Ctrl + A) on the master page or clicking and dragging to the top about halfway down the page. Removing these empty picture frames solves the problem.

  Thank you
  Colby

• HP OfficejetPro 8600 more: Scan works only from the PC, not the scanner

  My scan of my Officejet Pro 8600 function will not work unless I have run a scan uning the software installed on the PC.

  When I try to scan from the control panel of the printer, I get a notice that says:

  "For scanning to a computer to make sure that the feature is enabled.

  "Windows: open PC software, select the Scanner, andf Actions then select Manage scan of the computer.

  Q - How can I do this?

  Note: since I downloaded Windows 10 I was unable to find this software; Cortana does not work in my area. If I click on the HP software on my PC now I just get "click here to connect a new printer", which is stupid because it is already connected wireless. My other option is to click on "HP Scan" - this works!... great, so I can scan like that, but there is no setting anywhere under HP Scan that will help me solve the problem.

  I checked that the printer and the pc are on the same network and using the same IP address.

  Hello

  Thank you for using the forum.

  In order to activate "Scan to Computer", you need to install your software first.

  What you wrote, it seems that you have just upgraded to win 10.

  When you see the icon of the printer and it will prompt you to "Connect for a new priner", please click it and it will guide you to install your printer on 10 to win.

  Activate "Scan to computer".

  Here are the steps to activate "Scan to Computer".

  1. Go and click on the software for your printer.
  2. Under the "Scan" it should be a "manage Scan to Computer", click on it.
  3. Select "Scan to computer".

  Here is a screenshot (for example) that shows how to turn "Scan to Computer".

  

  

  Hope that helps!

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• BlackBerry Smartphones Media Manager works only with "BOLD"

  I installed the Desktop Manager 4.6 v software, but Media Manager is greyed out and cannot be used. Any ideas?

  Your Media Manager is gray as your Desktop Manager 4.6 installed is a version non-mediamanager. You can download the media manager versioon from here. Download Desktop Manager 4.6.0 B15 multilingual - with Media Manager or Director of bureau 4.6.0 English B15 - with Media Manager

• Function of ' play to ' Media Player works only not with the music on external drive

  Hi, I have not been able to "play to" music files stored on my Seagate external drive to a receiver AV Pioneer... "Play"works very well with the stored music files on my drive c of the laptop. Music on my external hard drive will appear in my library. Have laptop Windows 7 with Media Player... any help appreciated... .thanks

  Hello

  Do you have any application installed on the computer security?

  Method 1:

  If you do, I suggest you to disable anti-virus and check if it solved the problem.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the step is not enough, then you can go to the method 2:

  Method 2:

  I suggest you go through the steps and check.

  a. closed Windows Media Player12.

  b. Access Services [table-> system and security-> administration-> Services tools]

  c. find the service named "Windows Media Player Network Sharing Service"

  d. stop the Service manually.

  e. Locate the "UpnP device host"service. Stop the service and restart it.

  f. run "Windows Media Player Network Sharing Service" now.

  g. close windows all associated and the Panel. Open Windows Media Player, right click on a playlist and see if the Play option lists the TV. Try to play now.

  Hope this helps and keep us posted.

• InDesign text anchor links work only in the export to PDF.

  Hi all

  I have an InDesign document with a table of contents, I have rectangles drawn on each title, removed complete and race. I then linked these "empty" rectangles (using the hyperlinks Panel > create new hyperlink) to various anchor points of text that I placed it in the document. To create these text anchor points, I pointed out the titles throughout the document and using the 'new Destination of the hyperlink' via the menu of the hyperlinks, created all the anchor points of the text. I then just appropriate element Table of contents, create new hyperlink selected and "Anchor Text" in the options, choose the name of the anchor text and bobs your uncle. A dotted line appears around the rectangle "in white" and I then export as PDF.

  HOWEVER

  When I then open the PDF file, some of the hypertext links are clickable and take me to the destination I want in the PDF document. Some do not work. I don't know why. It's really frustrating.

  
  I tried to recreate the empty rectangles and the link between the rectangles to text anchors, but nothing will do. Anyone can shed some light on this? I'm doing it wrong? Is it using a blank rectangle to create the "button to click on the cause of this problem? There are about 40 of these empty rectangle buttons, as well as links to external PDF documents.

  Thanks in advance

  Thanks Frans

  I am amending a document made by someone else, and their mode of hyperlinking is ridiculous. Will have a look at the table of contents. For the moment, changing text link anchors to General pages allowed links to be clickable. The problem also seems to be to redirect the PDF as Adobe Reader works perfectly.

  It seems also to reference links to the indd rather than the PDF document or go to page 21 of *.indd rather than page 21 *.pdf

  See you soon!

• Acrobat Pro 9 (nine) works only with Office 365 subscription edition.

  Hi all

  
  I have a new subscription and new download of Office 365. The product is usually bug and really frustrating amendments to links to other programs that are sometimes difficult to understand.

  Specifically, Word 2013 will not communicate with Acrobat 9 Pro

  I tried to create a file PDF of the word through printing to PDF, but makes both programs crash. I tried to save the doc Word, AAP opening and using "Create a PDF file" Pro, but gives also the two programs crash.

  I was able to create a PDF via the Print To option, but since then, the two applications hang every time. Super frustrating.

  Anyone have this problem and, more importantly, a solution?

  Thank you.

  According to web browsers and applications of PDFMaker, office 2013 needs Acrobat XI (11). I understand that office 365 is basically Office 2013. In order to update Acrobat 9 will not solve the problem.