SOE on global positioning

Similar Questions

• GPS (global positioning) will not work. Lack of USB mass storage device

  When I plug my GPS device into the usb port and driver disk into a dvd, where both worked, the installation wizard gives me a notice of default. Reference to the Device Manager shows 2 yellow? mark. Use of the facility of re - install and update does not solve the problem. I get a message indicating that a usb mass storage device is missing. Insertion of other devices on the usb port in question, or any other, says there is nothing wrong with any. Does anyone have an answer

  Hello

  You are able to correctly use the other USB devices on your computer, I recommend you contact the manufacturer of the GPS (global positioning satellite) for assistance.

  Hope the helps of information.

• Get the matrix of global position for each character of text

  This message follows this related post.

  I need to get the position and orientation of the first and the last character in a text frame art, in other words, I need its matrix.

  There are a number of functions of the API that is supposed to help you; An excerpt from the ATESuites.h file

  / * Return of this race transformation matrix.

  The returned array spesify transformation complete the given execution.  You must transform the original by IGlyphRun::GetOrigins() and

  Concat with ITextFrame::GetMatrix() in order to get the location of the glyphs.

  */

  ATEErr (* GetMatrix) (GlyphRunRef glyphrun, ASRealMatrix * ret);

  Therefore, get the matrix of the first character or glyph should look like this:

  AIErr

  VMGetFirstTextMatrix (AIArtHandle textArt, AIRealMatrix * matrix)

  {

  ASRealMatrix frameMatrix, glyphMatrix;

  ASRealPoint firstPoint;

  Try

  {

  TextFrameRef ateTextRef;

  sAITextFrame-> GetATETextFrame (textArt, & ateTextRef);

  TextFrame ITextFrame (ateTextRef);

  ITextLinesIterator lnItr = textFrame.GetTextLinesIterator ();

  TxtLine = lnItr.Item () ITextLine;

  IGlyphRunsIterator grItr = txtLine.GetGlyphRunsIterator ();

  GlyphRun IGlyphRun = grItr.Item ();

  IArrayRealPoint pointArray = glyphRun.GetOrigins ();

  firstPoint = pointArray.Item (0);   dating bad values!
  

  frameMatrix = textFrame.GetMatrix ();

  glyphMatrix = glyphRun.GetMatrix ();

  Scissor-> AIRealMatrixConcatTranslate (& glyphMatrix,

  (firstPoint.h, firstPoint.v);

  Scissor-> AIRealMatrixConcat ((AIRealMatrix *) & glyphMatrix,)

  (AIRealMatrix *) & frameMatrix,.

  matrix);

  return kNoErr.

  }

  catch (ATE::Exception e)

  {

  return e.error;

  }

  return kNoErr.

  }

  But the coordinates is returned in frameMatrix (tx and ty) or the firstPoint are clearly wrong. It seems they have a lag that is allmost constant.  The values of x are about 7664 too great points (give and take a few decimals), and values are about 7893 too large (also give and take a few decimals).

  I'm puzzled by this, reall because I need to get precise positions...

  Well, it worked eventually.

  The ITextFrame::GetMatrix() method generally returns an identity matrix, unless I moved or transformed the object frame of text on the artboard.  For example, if I duplicated a text image object by dragging the object while pressing the alt key, this matrix will be transformation relative to the object that it was created. Since it is a relative transformation, it is not hard or soft coordinates, so it is foolish to harden or soften (in fact, you shouldn't do).

  Then the IGlyphRun::GetMatrix() method typically returns the identity matrix, but will contain a rotation for example, if the object is a text on a path.

  Finally, the IGlyphRun::GetOrigins() method returns hard coordinates for each glyph, but without the frame matrix transformation.  This method is insensitive to the GetCoordinateSystem / SetCoordinateSystem functions of the following system and returns the hard coordinates launch.

  Thus, in order to get the actual art contact information for the Board of Directors of a glyph, the following code will do:

      IArrayRealPoint pointArray = glyphRun.GetOrigins();

      AIRealPoint firstPoint = pointArray.Item(0);

      AIRealMatrix frameMatrix = textFrame.GetMatrix();


      sMath->AIRealMatrixXformPoint( &frameMatrix, &firstPoint, &hardPoint);


      sHardSoft->AIRealPointSoften( &hardPoint, &glyphPoint);


  In order to obtain the matrix of the absolute position of the first glyph of an art of text frame, the following function seems to work:

  AIErr

  GetFirstTextMatrix(  AIArtHandle textArt, AIRealMatrix *matrix)

  {

      ASRealMatrix frameMatrix, glyphMatrix;

      ASRealPoint firstPoint, softPoint, hardPoint;

      try

      {

          TextFrameRef ateTextRef;

          sAITextFrame->GetATETextFrame( textArt, &ateTextRef);

          ITextFrame textFrame( ateTextRef);

   

          ITextLinesIterator lnItr = textFrame.GetTextLinesIterator();

          ITextLine txtLine = lnItr.Item();   

   

          IGlyphRunsIterator grItr = txtLine.GetGlyphRunsIterator();

          IGlyphRun glyphRun = grItr.Item();

   

          IArrayRealPoint pointArray = glyphRun.GetOrigins();

          firstPoint = pointArray.Item(0);

          sHardSoft->AIRealPointSoften( &firstPoint, &softPoint);

   

          frameMatrix = textFrame.GetMatrix();

          glyphMatrix = glyphRun.GetMatrix();

   

          sMath->AIRealMatrixXformPoint( &frameMatrix, &firstPoint, &hardPoint);

          sHardSoft->AIRealPointSoften( &hardPoint, &softPoint);

   

          sMath->AIRealMatrixConcat( (AIRealMatrix*) &glyphMatrix,

                    (AIRealMatrix*) &frameMatrix,

                    matrix);

   

          matrix->tx = softPoint.h;

          matrix->ty = softPoint.v;

   

          return kNoErr; 

      }

      catch (ATE::Exception e)

      {

          return e.error;

      }

  }

  But, this has not come easily, and I must be allowed to blame poor documentation on this subject...

  Agnar

• Dynamically place video clip on the corner and the overall position with a mouse click (button) that is always running.

  Anyone know the code to find the global positioning of the coordinates X and Y of a click of a button which turns constantly,
  then the code when you click the button, it displays a clip on the top-(position de x et y lorsque vous cliquez dessus) to the angle that you clicked (so the buttons are always rotating so others can click on them where they are)

  to explain the context, I am designing a model to the top of an interactive round table
  When someone approaches her and click on one of the buttons that move, it reads where the person has clicked on it and open a new box (video clip) where they have clicked on it (on the corner) so is not backwards if you're upstairs.

  I have included my .fla file that shows the four navigation buttons and a small diagram
  explain what I'm trying to do.

  you don't have a class named MethodAnimalMC.

• Re: Problem connecting GPS AT100

  I have a Tablet AT100-100, that I just bought. I seem to have trouble connecting with GPS. I have activated the GPS according to the instructions of the manual, but still cannot connect with GPS. I tried to connect on google maps and was able to connect via wifi, but when I turn off wifi, I can not connect via GPS only. Is that what I can do to activate GPS or is it a hardware problem

  Hi toshibakias,
  personally, I own an AT200, then I am not a perfect fit for your question.

  I wonder if you confuse the GPRS (General Packet Radio Service) with GPS (Global Positioning System) here. GPRS can be used (pretty much as WiFi) on some devices to get a connection for data transfer. GPRS is not a feature of the AT100 (or AT200) but many phones.

  But if you mean a "fix" of GPS with the term "connection", then hopefully that operate you with the following steps.

  #1
  I recommend that you install the App "GPS status" for greater transparency. In this application, you can see if GPS is basically permitted and one count how many satellites is currently on view (+ reception quality). In addition, you can trigger a download of AGPS data (if a wireless Internet connection is at your fingertips) that can speed up the first fix.

  #2
  Go outside.
  GPS (for the most part) only works under a clear sky. Avoid the secondary buildings which can protect the reception of the GPS Satellites. The number of satellites for the application "GPS status" should increase now.

  #3
  Be patient.
  Get the position (= fix) may take several minutes. Especially if the GPS receiver is used for the first time or if the situation has changed considerably since the last use, a first fix may take up to 20-30 minutes. Generally, it should take about 5 minutes if GPS reception is good and maintain you an almost constant position.

  If you have the GPS 'fix' once, future GPS corrections could be faster. Also GPS position power (!) be still available at the entrance of a building (near windows, at least).

• LabVIEW block diagram icons became invisible

  I'm a bit of a loss here.

  I worked on a fairly large vi of higher level for a while when suddenly several vi system developed display problems.  In particular, all the screws of the FPGA module no longer appear on the block diagram.  They are there, because I can move the properties and thread them, but they are invisible.  Even if I add a new menu, it is invisible.  Is the same for the control on the structure of timed loop block.  The loop is visible, but the controls are not.

  I have attached a picture of a part of the vi that shows what should be a 'open FPGA reference' and a timed loop.  As you can see, the wires are connected and it compiles and works very well, but there is nothing on the screen

  It is specific to this vi.  If I create a new vi and add the same vi they look very well.  As far as I know, I did not change to any display settings.

  Any suggestions?

  Hi Nathan,

  You should be able to get a global position by moving one of the scroll bars.  When you click or drag the scroll bar a small box should appear (right of the cleaning if the BD is enlarged or below the bar of horizontal scrolling if the BD is is not maximized) giving the global coordinates.  If you find that you are outside about 15000 pixels (I don't know if it is a hard cut) are trying to move close to the origin.

  You should not recreate anything.  Actuall you can find the line where the icons become visible.  In a quick test here he looked about 15000 pixels.

  

• 4540 proBook s: 4540 s probook has internal compass

  4540 probook s has an internal compass?

  If so, how can I active it?

  Thank you

  @wp51dos

  With the help of GPS (some models only)

  Your computer may be equipped with a Global Positioning System (GPS). GPS satellites

  deliver location information, speed and direction for GPS systems.

  For more information, see the software help HP GPS and position.

  Search for one of these 2 devices in device under network adapters Manager.

  ● Sierra MC8355 HSPA/CDMA with GPS

  ● Ericsson 5321 HSPA + with GPS

  REO

• Rightway gps model 550 screen turned white

  Is about six months, is to be works fine and all of a sudden he just froze, then I close it took off and turn on nothing come on the screen except it lights and you c his there I push the reset button and nothing, just a blank screen, result of what we can do...?

  Hi saidabdi,
  

  For more specialist help on issue of GPS (Global Positioning System) device, contact the manufacturer of the device as this seems to be a hardware problem.

  http://www.noeticinc.com/store/merchant.MVC?Store_code=RW&screen=support

• Issue of GPS for Smartphones blackBerry device...

  Given that the "BOLD" has the GPS function, do we really like ATT provider to use?

  I noticed that Garmin has the software to use and that he did not know if you are required to have two subscriptions such as ATT and the other for Garmin.

  Make sense?

  Thank you

  Mike

  Tony9000 wrote:

  Yes you need to subscribe to an additional plan... Your blackberry; like most other smartphones. A - GPS [Assisted Global Positioning System] has built into it. This means that it requires access to data services to lock onto your position. Uses still A - GPS cell phone towers to triangulate your position, once there GPS takes care of the rest. Czech it:http://en.wikipedia.org/wiki/GPS_Phone

  Sorry, this isn't a correct information. You don't need an additional data plan, and it's not requiring an A - GPS cell tower triangulation.

  For example, I can (and have) remove the SIM card from my GPS-enabled 8900 or 9000 and walk outside and refresh the GPS acquire satellites, in this case, to locate me 4.3 meters. This satellite, no A - GPS or cell tower triangulation.

• How can I get exact latitude and longitude by GPS to PhoneGap.

  I use geolocation plugin to get lat, long but it still fluctuates after the fourth decimal place (means give fluctuation of 11 m from my current position). I tried to search on this problem and I got GPS (GPS + Glonass) Fixer (download mirror one... |) Samsung Galaxy Note II GT-N7100, N7105 , but do not know how to use it. So, can we use gps + glonass to phonegap to get the exact location if that please give me a better solution to get the right latitude longitude. Please suggest me.

  Short answer: forget it.

  Longer answer: as any geocacher known, the GPS is not reliable per metre (3 ft). May fluctuate, and once you're in the right place, you know that you could be several metres (20 ft) wide.

  Patterns and wallpapers here:

  Analysis of error for the Global Positioning System - Wikipedia, the free encyclopedia

• Preset point anchor and exposed position when inserting in the [global] model

  Where do I'll change the global preferences to predefine the measurement & 0,0 0,0 & anchor when you insert anything in the model.

  Help, please!

  Make an animation preset with the anchor attached to 0,0, select all your images in a model and click...

  The problem is that anchors sequences and model centers have always been implemented this way in AE and there is no way to change the anchor Point in the project Panel.

  Mylenium suggested, write a script and that allows you to import your images instead of import using the file > import.

• How to access a global variable that is common between the different baskets project library

  My project consist of several libraries, after generation the library project packed for each library, I find it cannot share data in a global variable between different packaged project library file. For example: packed project library #1 contains VI variables global wirte 'position' and give it a value '400 '. Library #2 present another VI project try to read this global variable, but he gave reading of is NULL not "400". Why has this happened? Is it possible to solve, welcome any help, I wll appreciate for this!

  If you understand what is happening here...

  When you build a PPL, it takes in the .lvlib and also all the dependencies of the .lvlib.

  In your case, when you generate the Test Task.lvlib in a .lvlibp, she also pulls on a copy of the DataProcess.lvlib:GlobalsVariable.vi because it's addictive to read GlobalVar.vi.

  When your application runs, you end up with two copies of GlobalsVariable.vi in memory:

  DataProcess.lvlibp:GlobalsVariable.vi

  AND

  Test Task.lvlibp:: GlobalsVariable.vi (I don't know how PPLs namespace dependencies... If there is still the DataProcess.lvlibp)

  Because they are different screws (i.e. in a different namespace), they have their own memory and that's why you can't access the data.

  Your Test Task.lvlibp calls the version of GlobalsVariable.vi, he pulled the dependencies.

  To solve this problem - you must ensure that Task.lvlibp of Test calls the version of GlobalsVariable.vi of the DataProcess.lvlibp - you'll need to replace all instances with the version of the PPL. Of course, if you run DataProcess in the development environment, then it will always be bad namespaced, hence the suggestion to put your global variable VI in is own PPL that you then use in the process of data and Test tasks.

• Global VI on the low level does not change from front panel indicator

  I attributed to a global variable (CMM_SN_Global 3.vi) to a value in a Subvi two levels down from the façade. When I run the VI of Panel before a flag set by the overall does not change even if the global variable is assigned the correct value until later in the program. Shouldn't be an indicator on the Panel before the value assigned to the global as soon as the world is assigned a value. Or is it not true?

  Thank you.

  Chuck M.

  Hi Chuck,

  If you asked for examples:

  

  What we have here:

  -the select node with these 3 Boolean constants is really absurd (aka RubeGoldberg) the output is always TRUE!

  -l' 'position' indicator belongs outside the case statement, any write on this indicator ("unnecessary local"!)

  -Why is there an additional wait inside the case? Do you really need that as you expect in the while loop?

  -It is not recommended to compare floats for equality - as you do here with the structure of your case when wire you a DBL to the input switch. Why not convert the data itself in full to be on the safe side?

  Then you say: "my plan is to have ten independent loops like the top.

  This is the reason for using subvis. You can have as many loops as you want, but only need to code once the algorithm ("duplicate code").

  More comments on why I recommend some "realignment"?

• IPS version 7.0.1 and global correlation

  Tomorrow night I will be moving an appliance IPS-4240 to the new version 7.0.1. Global correlation seems to be a huge advantage as long as it does not produce a swarm of false positives.

  Will there be still necessary to apply updates the signature on the IPS, once we are on the new 7.0.1?

  Global correlation is not a replacement for traditional signature analysis and is rather just an improvement for her.

  There are 2 aspects to overall correlation.

  The first is what we call reputation internally. IP address known to be the origin of the attacks receive a Score of negative reputation.

  When a signature is triggered, the source of the signature is compared to the reputation database. If the source address has a negative reputation score then the level of risk so that an alert is increased. With the increased risk, the sensor can take a decision to move forward and to deny traffic.

  BUT because it is based on this initial release of the signature, this means that you should always keep your signatures up-to-date.

  The second part of overall correlation is the reputation filter.

  With the offender the worst reputation filter Internet IP addresses are placed in a special list.

  The worst offense addresses IP is automatically filtered to the sensor without the need of a signature never triggered. These packages are refused by the sensor for early treatment and works in a similar way as the event action deny attacking InLine.

  So the reputation filter didn't need signatures in order to work properly and deny traffic. However, the reputation filter is only for the worst known IP addresses and only a small subset of the strikers in liquidation in the reputation filter list.

• Postings of a region on a global page

  Version 4.2.6 of apex.

  The theme is customized.

  
  How can I add multiple points of view for my region on a global page?

  Currently I have available: model organism 1-3, Page after the header and before the footer.

  
  Which are rather ambiguous for me since I don't have these vertical bars in my model.

  Para wrote:

  HM yes I tried, but it does not work for me.

  There is no default template defined in the default theme of component.

  Confirmation that it is the problem of Patrick here:

  Patrick Wolf-Oracle wrote:

  Have you added the new position of the region to your default Page template (theme setting) or to a different page template? Because the Page Designer will / can use only the Standard model of the Page for editing Page zero.

  I see this restriction causing problems. You cannot include all positions display in the default page template, but should not be able to locate the global content of the page in any position to deal with all the points possible display that could be used in other models of pages...