All games freezing randomly without crashing

When any game it freezes / crashes after a while seemingly random. everything just hangs and forces me to make a discount to zero manually. I tried to reinstall windows and perform a clean boot. None of which worked.

I ran prime95, furmark and chkdsk to confirm that my CPU, GPU and the disks work.

giving to sfc/scannow doesn't hint at something is wrong.

I don't get a "blahblah.exe has stopped responding" either as the whole PC crashes just, nor make a crashdump because I don't get a BSOD.

what I suspect now is that my CPU might be overheating, as I played the same games on this PC before and it's 60 ° C when I'm not playing.

Intel i5 - 3570K @3. 40 GHz

NVIDIA GeForce GTX 670

corsair vengeance 2 x 4 gigabytes LP

POWER SUPPLY 750W

EDIT: finally got a minidump BSOD I'll download it file.

Oops - you had already run sfcscannow. Forgotten that when the liquidation of my OP.

Also, I confused the 60 C at idle with the gpu.

The processor is running too hot. 95B is close protection thermal cut off during an i5 3570 and will shorten the service life of the processor.

Mine rarely goes over 65 - 70 c at full load, even with high ambient air temperatures.

60 c at idle is too high for a time slowed down on cpu or gpu. This may indicate poor

airflow in your case.

Take the side panel turn off your machine and run a fan in the case (or not) and the time

should fall if high temperatures are due to poor circulation of air in the case.

If they do not fall, reapply new thermal paste for the cpu can help, but an aftermarket cooler

would also be a good addition, if you are not already using one.

It is also possible that the speed profile of the fan for the cpu and the gpu are too shallow (assuming that you are not running

the fan to the cpu at 100% all the time), but this cause normally only fan speeds for up and down a lot and should not result in a heat block. When you are not running the cpu at 100% fan, using a fan speed profile steep is recommended with a gaming machine, anyway.

From a fan profile approximately 50 + % and bump the speed a little will it keep cooler processors of the appearance and helps keep the fan accelerates cycling continuously up to 100% and down to a lower speed, as often happens with factory fan speed profiles. A good cooler and a profile of fan speed should keep the processor under the temp that requires 100% fan speed.

"I removed one of my RAM sticks and it seems to solve my problems, I want a little my 8 gigs of RAM.

Have you run memtest on the sticks individually to determine if one is the culprit? Maybe the one you

deleted?

Are the two poles of a corresponding factory kit, or did you just recently installed the second stick?

If the later, make them two sticks have exactly the same features?

Have you changed your RAM settings in the BIOS, or through a program of OC'ing?

-You can also try to use the other pair of RAM slots to check if one of the slots that you are currently using is failing.

«Concerning the repair of the configuration of starting windows...» »

Yes, just to pass on what little I've read on this particular file and the error. It's probably not

the source in this case, but it's patches that we do not try may come back on us.  ;)

Boot sectors become corrupted for various reasons. Imaging of your operating system to a new HARD drive,

or reinstall Windows are just two examples.

.

Tags: Windows

Similar Questions

  • 7 P-64 bit Windows freeze randomly without error code

    My Dell Studio XPS 64-bit tend to freeze suddenly without leaving any error code or signal and the only way to get it is to restart the hard way. Anyone with a piece it can be and how to get around? It happens randomly, and I see not systematic in it, I can work hours a day without problem, this morning it freezes immideately when WMC starts. Any information appreciated.

    Hello

    Check the Option 2 here:

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Many files that SFC cannot resolve are not important.

    Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

    put the command from below (copy and paste) in this box and her and then press ENTER.

    findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

    who creates the sfcdetails.txt file in the folder that you are in when you run it.

    So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228 and http://support.microsoft.com/kb/929833

    This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
    here. NOTE: there are probably duplicates so please only post once each section error.

    You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
    You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
    (You may need to search sfcdetails.txt if it is not created in the default folders.)

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • El capitan 10.11.6 freezes randomly without safe mode

    So, after the upgrade to El Capitan on my iMac, retina pro, I started to have problems with the mac that freezes all the time (yesterday, couldn't work because it freezes a few minutes after opening--more than 10 times).

    Tried all that I found in the forums, and not not not using SAFARI, unplug the video plugins, diagnostic app, etc. Nothing works

    It only works on safe mode, but does not have the extension to see videos for example (which I need to work).

    Today, it happens the same thing - I'm in safe mode to write the email now, or would freeze already.

    What is happening is that by using the mac without safe mode, the mouse + keyboard freezes and nothing else happens.

    It's really annoying - I just changed from windows to have a reliable system that is certainly not the case.  Has anyone observed this behavior and is there a solution?

    Any ideas on how to solve this problem / test? Really panic - computer is less then 1 year.

    See you soon,.

    M.

    PS: I do not know how to make the backup of the system so can not go back to the last installation (as indicated in some forum).

    Usually problems are caused by old or incompatible software or other software that you can have as "cleaners" or antivirus.

    Launch Etrecheck (a utility by a respected member of the community) and post the report here.

    It lets you know what your hardware and software configuration and possibly suggest what may be causing you trouble.

  • Satellite L670 freezes randomly without reason

    I have exactly the same problem with Toshiba Satellite L670... for some reason it randomly freezes and can only be turned off by pressing the power button for several seconds.

    It has been reset several times but always than that.
    The fan starts, the mouse stops and the freezing of the screen. Very frustrating.

    I had local PC repair shop look and they say that it is certainly not a software problem, but perhaps also a defect on the graphics card that can only be fixed by replacing the motherboard?

    Cheaper to buy a new laptop?

    Shame, as he worked when he was a great laptop!

    > It has been reset several times but always than that.
    I assume that you have installed the original recovery image. Have you tested a few days without changing anything?

    On this virtual path, it is not easy to say what the problem is here, but I recommend you contact the closest service provider of Toshiba, to explain the situation and ask for help. Warranty is still valid?
    > Cheaper to buy a new laptop?
    Generally Yes but depends on where you want to buy.

    Try to clarify this with Toshiba service initially. Let us know what they will say on the subject.

  • Application Forms (made-to-measure) freezes randomly.  Urgent!

    Hello
    We have a forms application built in 6i and deployed on Rel1 9i application server.
    Database is Oracle 9i Rel2.

    The forms application freezes randomly without error.
    The version of jinitiator is 1.1.8.19.

    Forms scroll bars and most of them is painting on canvas ordinary tabs.

    Any suggestions would be appriciated greately. Help, please.

    Thank you.

    Honestly, I have not used the version 6 years as it was in 2005 desupported. All I can say is that you are trying to test in client/server. This would rule out a problem aside from customer like JRE, browser, etc. It would also exclude a matter of intermediate level. If the problem recurs in client/server, which suggests a problem with the runtime, the datbase, or your application code. For enforcement issues, all you can do at this point is apply the latest available patch series. For database problems, you will first need to determine if there was a problem with the procs of your data or db (as appropriate). Patch the PB would also be an option according to your old version. And then finally, to debug your application code.

    It might be a good time to start thinking about a plan to upgrade, including the operating system. ;)

  • Any computer made Firefox freezes randomly

    Back to firefox after buying a new laptop, I had problem regularly for the next 2 weeks:
    While browsing randomly, firefox will make my computer freeze everything at irregular intervals. The only solution is a manual restart.
    I went through all the troubleshooting page, disabled all my modules and extensions, but the problem continues which appear. It is very difficult to identify what happens bad, even if, as it seems to happen so randomly. I don't get any crash report.

    Any advice would be much appreciated, I would definitely stay with firefox.

    Said TM88

    It seems that the problem does not occur in safe mode

    Computer, or Firefox?

    This is not a cure, but should let the web page load without crashing.

    Flash block {web link}
    Never be annoyed by a Flash animation again! Blocks Flash so it
    will not be in your way, but if you want to see it, just click it

    The details of your system shows no player installed. What do you use?

    If you have any problems with the current versions of Shockwave Flash plugin then check this:

    • see if there are updates for your graphics card disk drivers

    https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

    • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

    https://forums.Adobe.com/message/4468493#TemporaryWorkaround

    • turn off hardware acceleration in the Flash plugin

    https://forums.Adobe.com/thread/891337
    See also:

  • Windows hangs / freezes randomly (RESOLVED)

    Hello!
    My computer hangs / freezes randomly every day. This started happening after a Windows Update. Please don't tell me to mess with my computer because I am 100% sure that it is not the computer, it's Windows. Please help me, I can't take it anymore!

    IMPORTANT EDIT: (the above problem is SOLVED) ignore this problem above and help me with this other problem, you can:
    I have another problem, one that I have had since I have this PC. I lose my Internet connection randomly without any reason, this happens especially when I play multiplayer games. The router still works, there is still Internet (in my iPhone, iPad, another PC), but my PC says:

    "Network 2".
    "No. Internet access"

    I use the internet cable. The cable is properly connected and I tried to solve the problems, but didn't work.

    So can you please ignore the last problem and help me with this one?

    Thank you in advance!

    Kevin

    System:
    OS: Windows 7 Home Premium
    Graphics card: nVidia GeForce GTX 690
    Processor: Intel Core i7-3960 X
    RAM: 16 GB of RAM

    I have not had the opportunity to try, but if you have access to another machine, you should be able
    do a repair reinstall of Windows by installing your HARD drive on this computer, unless activation
    You can do it on another machine.
    Once you move the HARD drive to your machine things should be fine,
    and if you reactivate Windows it should pose no problems.
    The 'install, upgrade and activate' instance should be people who can check it out.
    Or - if you have another HARD drive install Windows to this as a test (assuming the rest of the machine
    Awake quite a long time to complete the installation :)). If the machine still locks with a clean base
    installation of the material becomes more suspicious.

    You will need to answer a few questions over early to help in the process of elimination.
    Behind closed doors are not uncommon when focusing on a machine with a game, but randomly at any time the camera can come from many things are so difficult to solve.
    -You mentioned beeps. Describe the beeps. Long, short or a combination of both?
    They only happen once?
    The manual of your motherboard has a description of the beep codes? Different BIOS
    Use different codes, but the codes can be found on the web as well.
    -Have you run on the cpu, the gpu and the motherboard temperature monitors?
    -Have you tested the hard drive?
    -Settings of the BIOS to default? Not overclock the cpu or gpu?

    What were the results of the MS fixit is in the links above, and what did the
    FixIt actually do to try to resolve the failures? They were rolling Windows back to front
    you have installed the Windows Update in question?

    Things are running more fluid during boot, boot, that when in Safe Mode?
    Clean boot is useful for finding conflicting startup applications and services, but it does not cover
    programs, you can run after loading Windows.  He could also miss a few things like
    the pilot of Daemon Tools, which is known to cause problems, if you have Daemon tools or
    a similar software installed.
    Is that absolutely nothing else than you did at the time of the Windows update?

    Some of what I read the PSU Chieftek should be a good diet, but the review below
    find a problem with the application of current stable - (turbo Cheiftek 850W series)
    «The voltage drop is very high, unacceptable thing for a PSU 850w which is intended for the high-end systems that require a stable power supply.» Also with more than 80% of the charges, the readings of voltage of 12v lines are far from regulation ATX. Despite the fact that the pc continued to work normally, no one would have a power with this voltage drop. I would like to have the equipment to measure the ripple also. »
    While Chieftek is apparently made by the mfg even as some brands that are more
    known in my part of the world (Oz), an unstable current is often caused by markets good components (coils and capacitors), but even a good quality diet (any PC component) may be faulty from the start, and camera are a common symptom of a failed power.
    If the power supply was the problem and the system hangs even when not under duress, you do
    have a very real need to fear a crash while performing a repair reinstall. Full backup of data
    would be advised.
    .

  • Get random BSOD crashes

    Hello.

    Recently I have beed getting random BSOD crashes and pc freezes.

    System specs are

    Motherboard: Asus A4M87TD/USB3

    CPU: Phenom II X 4 965 BE

    GPU: Gigabyte Radeon R9 270 X 2 GB

    RAM: Corsair Vengace 8 GB (2x4gb) 1600 CL9

    PSU: 500W

    I ran tests:

    Memtest: 2 pieces of RAM moved together, between banks for 12 hours - no error

    Memter: one piece of ram at a time in 4 different banks each for 7 hours - no error

    Stability test OCCT for 3 hours - no crash

    Prime95 test 1 hour - no crash

    GPU has beed tested in another PC and works without any problem

    Accidents seem random.

    PC can get a bsod while using an internet browser (opera and IE also) or during a game (Battlefield 4, Battlefield 3, games, F2P, Eveonline etc.).

    The system is clean installed yesterday with driveres up-to-date.

    Used Whocashed to try to locate the troublemaker of disorders, but without result.

    Hers the link to 3 the most recent dump files

    https://onedrive.live.com/redir?RESID=DFB27DBEF4C25712! 1813 & authkey =! ABusdbioU9G1Vvs&ithint=file%2c.zip

    Any help would be appreciated.

    There is certainly no problem of software here, I'll tell you that much. This very much looks like failing RAM currently, or the motherboard as you said.

    How do you use your RAM via the BIOS? I * do * it passes Memtest, but it can still be misconfigured. I reset the CMOS for testing purposes and leave everything to default settings, not to touch even the DRAM timings. Leave for what she restores.

    Kind regards

    Patrick

  • Portege M200 freezes randomly

    Hello

    I bought a new M200 Tablet PC January last year, and I was happy with my choice. But 3-4 months ago launched machine fo freeze randomly when running Win XP Tablet edition - from initial installation. I reinstalled using the recovery DVDs, but not pursued gel model. And for about 2-3 weeks he startet freeze every time I used windows - after using it for about 2-20 minutes...

    I tried to install win2k and the latest beta2 of Vista, but Ut still freezing. - Then I made a funny discovery... It never froze when running one of these versions of win in safe mode! I can run for hours with no problems - but it's not funny to use it in safe mode all the time but...

    I can't find all the topics like this here - anyone know this problem? Maybe just a hint?

    BIOS version: 1.60
    Model No.: PPM21E-0260Z-DK

    Hello

    The Toshiba Recovery CD contains all drivers Toshiba, tools and utilities, and other patches of Microsoft Windows.
    In my opinion your device freezes on the original Windows installation because Toshiba stuff was not fully installed and/or some Microsoft updates fails.
    The order of the proper installation of application of Toshiba is also necessary to use the laptop without interruptions or errors.
    In this case I would recommend urgent to use the Toshiba Recovery CD.

    You also suggested that you used the Windows Vista Beta 2 version.
    I read a lot of comments here in the forum about the using Vista at the moment. Always is that this OS is not official on the market and it is not working properly because there BETA Version.
    I think that we must wait for the right drivers and, finally, the version of Vista

  • Vista Ultimate x 64 freezes randomly even when you are not running applications

    I feel the random system freezes from my PC. My PC Spec is below. Even if being run without applications and the system is on the desktop system will freeze randomly (can not move the mouse and the keyboard does not respond) and will force me to restart the system manually. I noticed an error message in the event viewer what cultures upward each time that this gel coming and I was wondering if you could provide me with a solution?

    Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

    I have included my PC specs and components below, but it is unlikely to be a hardware problem most of the time, even when focusing on the computer with 'memtest' etc it will not break.

    Power: 800 W

    [Product information]
    * Product type: motherboard
    * Product model: M4A78T-E
    * Product S/N: 93MOAI569328
    Place of purchase: www.scan.co.uk
    * Date of purchase: 2009/6/7

    [Map mother specifications]
    * Revision of the motherboard: 93MOA1569328
    * Card motherboard BIOS revision: worm 2208

    [VGA Card Specification]
    * Supplier of the VGA card: GIGABYTE
    * VGA card model: GV-R467ZL - 1GI
    * VGA card Chipset: ATI RADEON HD 4670
    * VGA card driver: 8.563.0.0

    [CPU specifications]
    * Provider of CPU: AMD
    * CPU Type: PHENOM II X 2 550 BLACK EDITION
    * Processor: 3.1 GHZ

    [Specifications memory]
    * Memory seller: CORSAIR
    * Memory model: XMS3 DDR3
    * Memory: 2 X 2 GB

    [HARD drive specifications]
    Seller of HARD drive: WESTERN DIGITAL
    HARD drive model: CAVIAR BLACK
    HARD disk capacity: 160 GB

    [The module map specificatio]
    Seller of maps add-on:
    Type of card module:
    Model of card module:

    * Operating system: Vista 64 bit

    Hello

    Try the clean boot method, which is a process of elimination to see what could be the cause
    the question. Pilots also have an influence on the performance of the system so I would update those
    as well.

    Norton has been known to cause strange problems on some systems, so I would use the
    Norton Removal Tool to check its impact. The following recommendations for free
    replacements, so you have good protection while check you this. Download all
    replacements before you remove Norton and install after removing and resetting.

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN
    (Norton Removal Tool and others)

    Norton Removal Tool
    http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

    List of tools to clean/uninstall anti-malware programs
    http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

    -------------------------------------------------

    Here's what I use and recommend: (these are all free and very effective versions.)

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leave the file system, Web,.
    Operational network (Script and behavior are also recommended in Ver 6 +).

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Two versions of Avast are available 6.x and 4.8 x

    Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
    and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
    Finish those you don't use).
    http://www.avast.com/free-antivirus-download#TAB4

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
    Use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y   <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.
    http://www.Malwarebytes.org/products/malwarebytes_free

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • My OS windows 7 freezes randomly.

    I can restart only by pressing the power button. It also does not save user names and passwords even if I permanently authorizes to invite when appears. I cleaned up in selective upward startup so that only windows programs run msconfig. I always struggle with the gel so I do not think it is the substance of the issues of program. I use MS Security Essentials as my antivirus, that's all.

    Hello

    Thanks for posting in the Microsoft community!
    You have reached the right forum for your question. If I understand correctly, the Windows 7 operating system freezes randomly. I suggest you follow the troubleshooting steps to check if this may help.

    1. don't you make changes on the computer before the show?
    2. you receive an error message?

    Method 1:
    Step 1: Check if the problem occurs in safe mode.
    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
    Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

    Method 2:
    You can scan System File Checker to fix corrupted files.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 3:
    If the steps above don't then try the steps from the link and check.
    Crashes Windows or freezes
    http://support.Microsoft.com/kb/2681286#method5

    Just reply with the results. I'd be happy to help you further.

  • My new installation of Windows 7 freezes randomly,

    My new installation of Windows 7 randomly freezes, the screen goes black and says "no signal".

    I can't turn off my computer except by disconnecting it., which means that the power button does nothing.
    I did a clean reboot with all the MS drivers without disabilities and she always does, so it is not a software conflict according to Ms.
    I am quite at a loss of what to do now; self-help told to ask here.
    I see a lot of complaints of this nature but no resolution. Very frustrated.
    Can someone please?

    Right now I have disabled all features of sleep on hard disks and screens and power. Also, I took leave fan I added via a double fan--> cord a brooch that I just bought. So far he collapsed again and it's good at the time, I started to wait for an accident. I will continue for a few days like that and then if all goes well, I will add back the fan see what's happening, and then after that undo the change of parameters of power, I did.

  • Random system crashes

    Hiya

    Been having a problem for a while now and it seems that its getting worse. I'm having crashes completely random, random and systemic.  By chance I mean I don't know how to reproduce the problem, it can happen at any time. It often happens in the middle of a drawing in paint Studio Clip (annoying!) or after my iMac wakes up and I'll enter my password (also maddening!).  It could happen tomorrow, in two weeks then and perhaps a few hours from there and then maybe three weeks later. It's very random, but it happened at least a dozen probably several times in the past 6 months that I have owned this computer and I'm losing work because of this.

    What's happening: I'll take the spinning beachball, and will boost the my CPU to 100% according to a third-party application that is located in the menu bar called menu meters. The system is not responding, can't do anything else than to force quit apps. If I force quit all open applications, and then relaunch Finder, the system does NOT come out of it, I have to restart the iMac. Once again, I leave the computer at night to see if it would finally come to, but it won't.

    I am at a loss. I ran first aid on all my drives, ran diagnostics hardware at startup,... advice on how to proceed would be greatly appreciated. I have AppleCare but thought I'd try here first.

    Here are the results of my analysis of EtreCheck:

    EtreCheck version: 2.9.12 (265)

    Report generated 2016-06-18 00:39:11

    Download EtreCheck from https://etrecheck.com

    Running time 01:35

    Performance: Excellent

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Beachballing

    Description:

    Random system crashes

    Hardware Information:

    iMac (retina 5K, 27 inches, end of 2015)

    [Data sheet] - [User Guide] - [warranty & Service]

    iMac - model: iMac17, 1

    1 3.2 GHz Intel Core i5 CPU: 4 strands

    24 GB expandable RAM - [Instructions]

    BANK 0/DIMM0

    8 GB DDR3-1867 MHz ok

    0/DIMM1 BANK

    OK MHz 4 GB DDR3-1867

    BANK 1/DIMM0

    8 GB DDR3-1867 MHz ok

    BANK 1/DIMM1

    OK MHz 4 GB DDR3-1867

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n/ac

    Video information:

    AMD Radeon R9 M390 - VRAM: 2048 MB

    iMac 5120 x 2880

    Software:

    OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

    Disc information:

    ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (2) /: 1.02 TB (869,22 GB free)

    Encrypted AES - XTS unlocked

    Storage of carrots: disk1s2 23.55 GB Online

    Storage of carrots: disk0s2 999.35 GB Online

    APPLE SSD AP0032H disk1: (24 GB) (Solid State - TRIM: Yes)

    EFI (disk1s1) < not mounted >: 315 MB

    Boot OS X (disk1s3) < not mounted >: 134 MB

    Macintosh HD (2) /: 1.02 TB (869,22 GB free)

    Encrypted AES - XTS unlocked

    Storage of carrots: disk1s2 23.55 GB Online

    Storage of carrots: disk0s2 999.35 GB Online

    USB information:

    ASMedia Mercury Elite Pro USB Hub 3 TB

    Blu - ray Pioneer Pioneer Corporation 8.01 GB player

    Elite Pro USB 3 TB

    EFI (disk5s1) < not mounted >: 210 MB

    Storage (disk5s2) / Volumes/storage: 2,00 (1.16-free) tuberculosis

    RAW (disk5s3) / Volumes/Raw: 1.00 TB (513,42 GB free)

    Realtek USB3.0 Hub

    Western Digital my book 1140 3 TB

    EFI (disk3s1) < not mounted >: 315 MB

    Backup (disk3s2) / Volumes/Backup: 2.50 (1.41 free) tuberculosis

    Boot OS X (disk3s3) < not mounted >: 134 MB

    Backup of Volumes/TEC TEC Backup (disk3s4): 499,73 go-go (462,16 free)

    Logitech USB receiver

    Broadcom Corp. Bluetooth USB host controller.

    Apple Inc. FaceTime HD camera (built-in)

    Realtek USB3.0 Hub

    Wacom Co., Ltd. Wacom wireless receiver

    Wacom Co., Ltd. Intuos5 touch L

    ASMedia Mercury Elite Pro USB Hub

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / Library/Extensions

    com [no charge]. FTDI.driver.D2XXHelper (1.0 - SDK 10.11 - 2016-06-03) [Support]

    com [loading]. Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8 - 2016-06-03) [Support]

    com [loading]. Driver Logitech.Unifying.HID (1.3.1 - SDK 10.8 - 2016-06-03) [Support]

    [no charge] com.lge.driver.LGAndroidmdmcontrol (5,1-10,9 SDK - 2016-06-03) [Support]

    [no charge] com.lge.driver.LGAndroidmdmdata (5,1-10,9 SDK - 2016-06-03) [Support]

    [no charge] com.lge.driver.LGAndroidndiscontrol (5,1-10,9 SDK - 2016-06-03) [Support]

    [no charge] com.lge.driver.LGAndroidndisdata (5,1-10,9 SDK - 2016-06-03) [Support]

    [no charge] com.lge.driver.LGAndroidrndis (5,1-10,9 SDK - 2016-06-03) [Support]

    [no charge] com.lge.driver.LGAndroidserial (5,1-10,9 SDK - 2016-06-03) [Support]

    [no charge] com.lge.driver.LGAndroidusbbus (5,1-10,9 SDK - 2016-06-03) [Support]

    / System/Library/Extensions

    com.Wacom.kext.wacomtablet [no charge] (Tablet Wacom 6.3.15 - 2 - SDK 10.11 - 2016-06-03) [Support]

    Launch system officers:

    [loaded] 7 tasks Apple

    [loading] 159 tasks Apple

    [operation] 72 tasks Apple

    Launch system demons:

    [loaded] 46 tasks Apple

    [loading] 156 tasks Apple

    [operation] 88 tasks Apple

    Launch officers:

    com [running]. Logitech.Control Center.Daemon.plist (2015-09-18) [Support]

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-12) [Support]

    [failure] com.adobe.AdobeCreativeCloud.plist (2016-02-14) [Support]

    [operation] com.brother.LOGINserver.plist (2015-10-13) [Support]

    [operation] com.wacom.wacomtablet.plist (2015-12-16) [Support]

    Launch demons:

    [operation] com.adobe.adobeupdatedaemon.plist (2016-04-12) [Support]

    [loading] com.adobe.agsservice.plist (2016-04-12) [Support]

    [loading] com.adobe.fpsaud.plist (2016-06-13) [Support]

    [loading] com.wacom.displayhelper.plist (2015-12-16) [Support]

    User launch officers:

    [loading] com.adobe.AAM.Updater - 1.0.plist (2015-12-11) [Support]

    [operation] com.amazon.music.plist (2016-01-04) [Support]

    [loading] com.bittorrent.uTorrent.plist (2015-12-22) [Support]

    [loading] com.valvesoftware.steamclean.plist (2016-05-15) [Support]

    Items in user login:

    ChronoSync hidden Scheduler application (/Applications/ChronoSync.app/Contents/Library/LoginItems/ChronoSync Scheduler.app)

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Mail request hidden (/ Applications/Mail.app)

    Hidden reminders application (/ Applications/Reminders.app)

    Synchronization of BitTorrent application (/ Applications/BitTorrent Sync.app)

    MenuMetersApp Application hidden (/ app Library/PreferencePanes/MenuMeters.prefPane/Contents/Resources/MenuMetersApp.)

    Other applications:

    [ongoing] com.adobe.CCXProcess.228832

    [ongoing] com.adobe.Photoshop.65312

    [operation] com.adobe.acc.AdobeDesktopService.18912.B7DC4AEA-17E3-4995-8AE6-060A2DB9D962

    [ongoing] com.Adobe.accmac.64032

    [ongoing] com.bittorrent.Sync.236832

    [ongoing] com.brother.utility.NETserver.155872

    [ongoing] com.brother.utility.USBserver.155552

    [ongoing] com.econtechnologies.backgrounder.Chronosync.137952

    [ongoing] com.etresoft.EtreCheck.240352

    [ongoing] com.wacom.TabletDriver.97632

    [ongoing] com.wacom.WacomTouchDriver.96992

    [ongoing] com.yujitach.MenuMetersApp.6752

    [ongoing] jp.co.celsys.CLIPSTUDIOPAINT.216032

    [ongoing] org.Mozilla.Firefox.6112

    [loading] 402 tasks Apple

    [operation] 200 tasks Apple

    Plug-ins Internet:

    AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-12) [Support]

    FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-18) [Support]

    QuickTime Plugin: Unknown (2015-09-21)

    Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-18) [Support]

    Default browser: 601 - SDK 10.11 (2016-05-19)

    PepperFlashPlayer: 21.0.0.242 - SDK 10.6 (2016-05-21) [Support]

    WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2015-12-16) [Support]

    3rd party preference panes:

    Flash Player (2016-06-13) [Support]

    Logitech Control Center (2016-02-06) [Support]

    MenuMeters (2015-10-07) [Support]

    WacomTablet (2015-12-16) [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 1.02 TB disc: 147,16 GB

    Destinations:

    Backup [Local]

    Total size: 2.50 TB

    Total number of backups: 64

    An older backup: 18/12/15, 11:02

    Last backup: 17/06/16, 23:50

    Size of backup drive: adequate

    Size of backup 2.50 TB > (disc 147,16 GB X 3)

    Top of page process CPU:

    3% WindowServer

    2% fontd

    1% kernel_task

    0% MenuMetersApp

    0% com.apple.WebKit.WebContent

    Top of page process of memory:

    1.49 GB kernel_task

    1.22 GB CLIP STUDIO PAINTING

    467 MB firefox

    442 MB Adobe Photoshop CC 2015

    Finder 369 MB

    Virtual memory information:

    15.00 GB of free RAM

    8.50 GB used RAM (1.63 GB being cached)

    768 KB used Swap

    Diagnostic information:

    June 18, 2016, 12:08:32 AM ~/Library/Logs/DiagnosticReports/Creative Cloud_2016-06-18-000832_ [redacted] .crash

    com.adobe.acc.AdobeCreativeCloud - Applications/Utilities/Adobe Creative Cloud / * / Creative Cloud.app/Contents/MacOS/Creative Cloud

    June 18, 2016, 12:07:55 AM self-test - spent

    June 17, 2016, 23:49:09 ~/Library/Logs/DiagnosticReports/Creative Cloud_2016-06-17-234909_ [redacted] .crash

    June 17, 2016, 14:52:05 ~/Library/Logs/DiagnosticReports/Creative Cloud_2016-06-17-145205_ [redacted] .crash

    June 17, 2016, 09:10:18 ~/Library/Logs/DiagnosticReports/Creative Cloud_2016-06-17-091018_ [redacted] .crash

    June 15, 2016, 23:59:31 ~/Library/Logs/DiagnosticReports/Creative Cloud_2016-06-15-235931_ [redacted] .crash

    Thank you!

    -Jon K.

    I think the HARD drive is a bad thing. Check with utility disk first aid.

    And personal Adobe something wrong. Remove and reinstall from scratch could solve the problem.

  • MacBook Air freezes randomly

    Hi all

    I had a problem with my Macbook Air early 2015 since nearly a month. I freeze random OS experience (I'm under OS X El Capitan 10.11.4): the cursor moves and the keyboard is unresponsive, so I can't do anything at all. The only thing I can do to "unlock", it requires the laptop to restart (by turning manually him off and then back on). This problem occurs more or less one or two times a week and I didn't notice a particular task or request that I am running that may cause the gel. Usually, it happens while I'm surfing the web with Safari, but not all the time.

    Any ideas or suggestions on how to solve the problem?

    Thank you very much in advance for your help.

    Download and view a report of Etrecheck:

    http://www.etresoft.com/etrecheck

    Ciao.

  • All websites freeze when I use Firefox

    All websites freeze when I use Firefox. I can't click in any of them... Banking online from Constant Contact, AOL. This has happened in recent weeks. Please help. My internet explore is fine. I prefer Firefox, but the question needs to be clarified.

    Hi chkreynolds,

    There are a few reasons that Firefox could freeze. You should look at the troubleshooting steps in the article Firefox crashes or does not - how to fix. There a lot of useful information that should help you to solve your problem.

    Hope this helps!

Maybe you are looking for

  • How to bypass the password or reinstall windows on Portege 2010?

    Hello I have a Portege laptop, P2010 with no floppy drive or a cd.Please can someone tell me how to reinstall windows or bypass the ctrl alt del on start up password because I can find a way to the t...

  • Media Player is no longer locate the music files. The library is empty.

    I have the media player 11 and it worked very well.  One day I opened it and there was no music in the library.  I tried to manually add folders to watch. Whenever I do, the next time I open it, the Analyzer of files is empty.  As if I never said wha

  • ILI32.dll error message is missing when I installed Bible Word Search

    I installed a reference from the bible, and when I try to run the application, I get the error message that ILI32.dll is missing.  Can I download on the Windows Web Site this?

  • Windows fix disabled services and prevention

    Many services and processes were arrested after an alleged attack trojan/virus. Especially the services of Windows Installer do not work in normal startup so I can't install any software including the installer of Windows or Vista, etc.  While progra

  • #s around hyperlink on query related

    Hello I have an Access query that contains, among other things, a field that contains a hyperlink. When I have a link to this query in Excel, the address (web address for a pdf file that has been uploaded to our website) is a symbol # in the beginnin