Software 23.1.A.0.726 "could not upload" error message when I try to update
Pav99 wrote:
The update has finished downloading? I've been seeing the same thing you all morning. Sometimes, the download starts and even downloaded a few Mo before giving up. Frustrating.
Once again, same here. Is it possible that the servers are overloaded?
Tags: Sony Software
Similar Questions
-
Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.
CBTEKRONY wrote:
Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.
What is this error message that you receive? This would help a lot. From there, a person must be able to provide some additional troubleshooting steps.
-
Title files: original vista on the recent items list does not open
When I select a file from my recent items list, I get an error message indicating that the file is not found, but it lists the correct path to the file, and if you go to this path of the file, the file is clearly there. This happens with word and excel files but not the adobe pdf files.
Hi GillianMO,
Remember to make changes before this problem?
Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
Diagnose and repair Windows files and folders problems automatically
Difficulty of broken desktop shortcuts and common system maintenance tasksNote: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
If the problem persists, I suggest you to send your request in the Forum Office for more specialized help.
Office Forum
http://answers.Microsoft.com/en-us/Office/Forum/Excel?page=1
-
Difficulty 'Not connected' Error Messages When you try to access Web Services
If you are running on an error message on your printer stating that it is "not connected" when you try to access ePrint or your applications, but you know that it is connected to the internet, it probably just means that the printer does not connect to the server properly.
Here's the first set of markets, I will try, as they seem to solve this problem deliver half the time.
- The first thing I'd like to try in this situation is a reboot of the system.
- First, unplug the power cord at the back of your router.
- Then unplug the power either to the back of the printer or the wall without it first turn.
- Wait about 30 seconds and reconnect the power cord to your router.
- Wait about another 30 seconds and reconnect the printer. It should start back up automatically, but if it is not moving forward and press the power button.
- Once everything is back running, try to access ePrint or your applications.
If these steps do not work for you, the next thing would be to establish a static IP & DNS for the printer. Before doing this, you want to print a Network Setup page. It varies from a model, but usually found under settings wireless or in reports in the Setup menu. After that you have this page, follow these steps.
Before we begin, we need a network with your current connection settings configuration page. To do this, press the button on the front of your printer wireless and press 'Print Info' or 'print the State. " This example displays on a page of configuration of the network, which provides information on what we have to finish the next few steps.
- After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.
- Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).
- Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.
- For the primary or the preferred DNS server, you will want to enter 8.8.8.8.
- For secondary school or another DNS server, you will want to write 8.8.4.4.
- Click on apply and when the message appears saying that the changes have been applied, press 'OK '.
- Press the power button on your printer, wait that it completely power off and press it again to power it on.
- After doing this, go ahead and try to activate ePrint again.
These measures should fix this for you. If they don't, then something else can cause this problem for you. Reply in this thread if these steps do not work, and I'll see if I can help figure you out what might be causing the problem.
-
5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
Setup could not create the directory
c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
Error5: Access denied
In the Temp folder under Security I have:
'SYSTEM' with full control
"Administrators" with full control
"Username" with full control
All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
The two latest downloads gave the same error message.Thank you for your time.
DebbieI suggest you do this:
1. click on the start planet.
2. type cmd.exe in the search box.
3. press on Ctrl + Shift + Enter
4. click on "run as Administrator".
5. type the following commands exactly and press ENTER after each:
takeown /f "%Temp%" / rCacls "%Temp%" / t/c/g "%nom user %": F System: F
(Enter Y when you are prompted "Are you sure?")
-
Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them
Is working this morning!
Depends on your operating system
Go to google, try typing in
Change the Windows permissions
or
Change the permissions of Mac
-
Original title: initialization error 112 Setup
1995 installed Kodak DC200/DC210 Zoom camera software.
Explanations with the error: decompress the program files not all charges.
Note: A message previous said that some files can not be installed at this time, because the areas have been used, and records still awaiting loading would be installed when the computer was restarted. (My phrase).
I may not be a problem, but I don't know how I would like to know whether the error 112 was relative to the previous announcement requirement of a restart or another unrelated with error 112.
Thank you
Destry
PS: You know; In appearance, it could be as silly a question as it seems... But I deal with my share of 'Error' messages, so I'll take the risk that the crazy and ask anyway.
D.
Hi Destry,
1 windows operating system you are using?
If you use Windows Vista, it seems that the Kodak camera is not compatible with Windows Vista.
For more information, please visit the following links:
http://wwwca.kodak.com/global/en/service/digCam/dc210/ownerManual/05inSf.shtml#88364
You can try to install the device in Windows XP compatibility mode and check.
Check out the links for more information:
How to troubleshoot program compatibility issues in Windows Vista
http://support.Microsoft.com/kb/927386
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
Also read the following article:
Error 112 Setup Installation Error message"when you try to install a program
http://support.Microsoft.com/kb/326678
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)
It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.
The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.
-
set update not installed not message when I try to update
set update not installed not message when I try to update (security update for Windows XP Edition Media Center Edition 2005 Update Rollup 2 X 86 (KB2619340)
Hello
- What is the exact error message you get?
- You have installed Service pack 3 on the computer?
If you have installed service pack 3, then I suggest you to download the update manually from this link and check if that helps:
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28469Also check this link for more information:
http://support.Microsoft.com/kb/906602It will be useful.
-
Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top. Please provide me with a fix for this problem. Thank you
Hello
What type of material is actually causing the problem? Is there more information the Fix It center offers you?I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.I hope this helps. -
I get an error message when I try to log into ExportPDF with my Adobe Reader software. "Network error has occurred trying to connect. Can someone help, please?
Hi Simon,.
I'm sorry to hear that you are having problems connecting to ExportPDF by the reader. I checked your account and everything is fine there.
To start, please make sure that you have the latest version of the reader on your computer by choosing Help > check for updates.
If you still have problems to connect by the player, please try to connect to the web interface at https://cloud.acrobat.com.
Please let us know how it goes.
Best,
Sara
-
"File not found" error message when you save the document
Hello
Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found". I have to click on 'ok' and the document is not saved. I tried to register differently in previous versions, and it still does not work. I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk
Why would he try to find a file? Looks like an error message when you try to open a doc, does not save a doc.
Help, please! I can't stop my station until I get the document to save.
Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);
Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).
-
I just got the error meassage when you try to open both my I and PS I paid monthly payments for the composition and I have these two installed software. What can I do to work on it and why they give me this error message?
Log, activation, or connection errors. CS5.5 and later versions
Anything else, to be more precise. you have not provided information system nor told us, what really is the error message.
Mylenium
-
I put my OPS on a new HD, I downloaded a certain software programs, all was well. Then I tried a few other pieces of software, and this message keeps coming up' install windows service could not be accessed. This can happen if windows install is not properly installed please contact support for assistance. "I tried many things even impose another operating system on the old installer works for a few days and then breaks down someone can help please.
You may also want to check this thread:
-
Error: "Windows could not complete the format" when you try to write to blank DVDs
I get this error when you try to copy files to a blank DVD. I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message. Then the drive no longer recognizes blank dvd inside. I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata. I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved. I think that the report mentioned that the reader could recognize not writable or something to that extent. The player can play DVDs fine, however. Is there a solution to this problem by replacing the dvd ram drive?
Hello
Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
speed or mastered format. Have you added any burning new software lately - these tend to compete
for resources and can interfere with each other.Should which CD or DVD format I use?
http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use====================================
You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
CD have a tolerance + - and you can write on the outside edge.
Several good info here:
http://Club.myce.com/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014-----------------------------------------------------------------------
Try this troubleshooting:
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Flatten to a string to send arbitrary objects by messages from the user interface?
Hi people, I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is onl
-
system will not load or repair, missing operating system loader. How to fix?
system has not worked since the update. fault of lack of shows os loader. How can I fix the problem. ; -j
-
Unable to generate the sigtool.csk file
Hello I got 3 files for the signature of Blackberry. Now, according to the instructions when I click on any of the certificate that it calls for the private key is not available, would like to create it now. When I press Yes, nothing happens. This is
-
Why is there not a similar level for students with Vista Ultimate?I have windows 7 and I have to pay even more, but I don't want to do a custom install and lose all my programs, that much I can not reinstall. Not to mention, I have at least 30 gigaby
-
Have a new computer w/windows 7, downloaded and installed PalmDesktop Win62, the computer still does not recognize the handheld computer. Can someone help me to solve this problem with the process to complete the installation and able to hotsync to m