Software AIO HP J6480 problem, I think

Similar Questions

• Photosmart 3310: Download software AIO Center Photosmart 3310

  This product is no longer on the support site. Where can I download the software AIO Center for Sierra of Mac OSX and Windows 7?

  Hello

  For Windows 7 download and install the following software:

  http://ftp.HP.com/pub/softlib/software11/COL30951/MP-76831-1/AIO_CDB_Net_Full_Win_WW_130_141.exe

  Sierra, follow these steps to install the printer through the Apple Software Update:

  http://support.HP.com/us-en/document/c04510394

  If you are having problems getting the drivers through ASU, download and install the following package before, adding the printer under Printers & Scanners:

  https://support.Apple.com/kb/DL1888?locale=en_US

  Kind regards

  Shlomi

• Software AIO with the only USB 3.0 systems problems

  I just had problems with the installation of PSC 1510 and J5780 to be connected systems USB 3.0 only as a Fujitsu Lifebook A544 under W7 - 64.

  In both cases, download the latest package and stopped installation:

  http://www.Club-PAC.de/download/HPj5780-error.PDF%C2%A0

  W7-64 systems are fully patched, a "naked" before first Installation HP look so no HP software - lay before.

  Note: alle USB3.0 ports are in good condition!

  Reference:

  http://h30492.www3.HP.com/T5/Drucker-und-all-in-one-GER%C3%A4te-installation-und/installation-Softwa...

  http://h30492.www3.HP.com/T5/Drucker-und-all-in-one-GER%C3%A4te-installation-und/HP-J5780-keine-Inst...

  Solution (at least for Fujitsu of A544):

  If possible, use BIOS routines disable the functionality of USB 3.0 and USB 2.0 only instead.

  Windows will then take some time to install drivers for USB for USB 2.0 devices, but after that, the HP AIO software installation will succeed.

  Now, you can reactivate the USB 3.0 feature in the BIOS. Believe it or not, software, printer, scanner still doesn't work.

  Add on: evidence for quality control: using scanner in German will have Dutch expression on the button "Cancel"...

• My computer has multiple problems (downloads, updates, drivers, software...) which I think could be connected.

  Everything I download becomes corrupted somehow or is unable to run. I tried to UN - and reinstall the Zune software (because my computer had ceased to recognize my Zune while it is plugged), but when I tried to install it again, I got a "not a win32 application invalid" notification. I tried several times to download updates, but they still run into an error before completing. My mouse cursor freezes or moves around / clicks on its own occasionally. My internet connection is extremely slow and unreliable, despite the fact that the connection has recently been updated and given a more secure password. I tried to run a system restore in the hope that it would be useful, but which failed due to a program that could not be accessed. I disabled Avast! (I also have Malwarebytes can't see how to turn off) and ran the system restore again, but met the same problem. I think it was a virus, but I ran Avast! "s boot time scan run Malwarebytes in safe mode, and the problems continue.

  I'm sure a couple of them at least are pure coincidence, but most of my problems appeared recently (about three weeks) ago and I have been fighting with them since. This is what gives me a thought that they are connected. Does anyone have an idea of what my problem, or how I might solve this problem?

  Here are some other things you can check. Get your updated antivirus program and start safe mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

• Photosmart C7280 AIO: Installation of an earlier version of the AIO software to solve the problems of scanning?

  I had nothing but troubles attempt at analysis of the Solution Center with my Windows 7 upgraded to professional to Home Premium.  I've seen a lot of posts on sysems that will print but not scan.  None of the solutions proposed on these threads has worked for me. I ran print and Scan of the doctor.  I've uninstalled and reinstalled the latest version (PS_AIO_02_Net_Full_Win_WW_130_140).  I run L4 uninstall and reinstalled the latest version.  I scanned my computer against viruses and malware.  I ran "SCF/scannow".  I have run memory scans.  I did "unplug everything" and reset.  I ran the product as an administrator.  I tried to run several compatibility modes.  This past for more than a week, and I was not inactive.  You name it I did it.  I don't want to turn on my computer to its configuration 2 years up to what I've exhausted all other possibilities.

  Now for the real question (for those who have had this or similar questions)... Has anyone everything uninstalled and tried to install an older version (which can be improved later)?  My old version on my OLD XP laptop works fine.  I still have the older 100_228_PS_AIO_02_Full_Net_enu_NB verson of the installer.  If it will install (and work) on the WIN7PRO, I'd be happy.  Darn, I just try that anyway, but I would feel more comfortable if I knew that someone had tried (win or lose).

  All suggestions are solicited.

  I have no recourse to the use of the old S/w.  I kept search some old discussions in this forum and finally a couple linked together which resulted in success (after several attempts at all the great suggestions that I had read in the forum).  BUT. one stands out because it spoke of my exact problem. Scanning from HP with my Photosmart C7280 solutions Center after the upgrade to Windows 7 Edition Home Premium to Windows 7 Professional.  The solution has been presented in a thread of 2009:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/after-Windows-7-upgrade-printer-is-installed-but-nothing/m-p/174825#M8248

  I landed on this all to coincidentally linking 2010 regarding a similar issue but diferent (similar = upgrade, different = print):

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/networked-C6280-and-Windows-7-64-bit/TD-p/217282

  I am so happy that the old wires still exist in this forum.  The solutions are not always the most obvious, especially for those of us who have been around computers for almost 40 years and have some predisposed notions.

  Thank you to everyone.  Now to save this thing before something else goes south.

• Wireless using Photosmart 7280 AIO and Photosmart 3210 AIO USB - installation problem

  I use Windows XP sp2. The 7280 is new, so I was told HP support completely uninstall all my computer HP software, then install more software 7280, then use the menu option 'Add device' on the installation software of 7280 again to install the 3210. I have installed suceesfully 7280 software and am able to access the 7280 on my wireless LAN. However, when I use the installation of 'Add device' in the installation software, I get the dialog box 'Connect Your Device Now' (following the instructions for the installation of the USB) and when I connect the USB to my 3210 to the computer, I get the Windows Wizard 'addition of material", which is unable to locate the drivers for the 3210. The button 'Next' in the 'Connect Your Device Now' dialog box is not enabled, so I can't continue. It seems strange to me that Windows identifies the device but the HP software does not see. The 3210 is not in my list of printers in Windows.

  Even more strangely, yesterday I ran the base driver and utility download for the 3210 off the coast of the HP site after installing the 7280 software (probably shouldn't have done) and everything worked, I was able to print on both devices, however this morning when I turned on the computer I got a HP dialog box telling me that the installation failed and it can uninstall some software including all drivers 3210.

  Any suggestions? What I have to spend 2 + hours to uninstall and reinstall from the beginning again?

  Well, I think that I solved, at least as well as is possible. I just uninstalled, installed all the 3210 drivers downloaded from HP, then install the software suite full 7280. Both printers are available and print jobs, but the HP Solution Center software only allows me to access the AIO 7280, so I guess I won't be able to scan from my 3210 on my computer - I have to use the 7280 for this. I didn't install the software suite full of the 3210 - maybe that would give me two centers solutions HP (two different versions), one for the 3210 and one for the 7280...

  Incidentally, I don't have the CD 3210 - I think I have lost - so I'm dependent on the HP download page.

• Reinstall software AIO C3150

  I want to reinstall etc SUN, HP, for my C3150 AIO Solution Center.

  The HP AIO Windows Vista software, which I downloaded for my C3150, doesn't let me reinstall because he always thinks that I already have this software installed.

  I did not and I tried to remove all traces of it without success.

  Try this - when you install by using a downloaded software would be a temporay folder in your file time.
  Go to the race of xp or vista search bar and type %temp%. The hp folder you want begins with
  something like z97 7z9 I don't remember exactly. When you have found the right folder go to Util-ccc - find
  find the file .bat level 3 Uninstall (choose the 64-bit if your system is 64-bit) run it and
  It must rub your system of all files on hp which is missed on a typical uninstallation. Then, go to your c: drive

  and remove the hp folder it which normally houses your printer programs. Tell me how it goes

• KODAK AiO c310 driver problems

  My Kodak c310 was working fine, then after a failed update I uninstalled thinking software I could re - install using disk when I bought the printer didn't work kept indicating installation fails and try again... I did, it didn't work. I then went on the Kodak Web site for the latest downloads of driver again same problem keep canceling and says 'dismantling '. Ideas please...

  My Kodak c310 was working fine, then after a failed update I uninstalled thinking software I could re - install using disk when I bought the printer didn't work kept indicating installation fails and try again... I did, it didn't work. I then went on the Kodak Web site for the latest downloads of driver again same problem keep canceling and says 'dismantling '. Ideas please...

  Contact Kodak.

  Use system restore to go back to a point before you started to play with things and then - using the download of the software on their page Web only - install the latest version for any operating system you have (unknown).

• Malicious software removal tool update problems the last few months. Suspended for a very long time. Vista Home Premium 32 bit SP2

  Hello

  The last 3 months when the download and installation of my updates for Windows Vista, it gets stuck for hours on the malicious software removal tool. I have to cancel it. Restart the computer and reinstall. Then he moved very well and quickly according to historical updates. Last month, it was really difficult to cancell it well. He finally got through it. Here is a little history on my machine. I'm very very well with this computer. Each week, I do disk Cleanup, then defrag with diskeeper, virus scan with Microsoft Security Essentials. And every six months, I run a very large disk check and I said to correct errors and try to fix bad sectors. More than 3 years, I only had 2 minor bluescreens. I always make sure I have all my products Microsoft put updated. When I first got this computer I had a guy I.T. (a neighbor) out of the box and clean all the useless garbage out of it and it partitioned the hard drive. More than 3 years, he managed as a champion. Always very fast and all.

  I hope that I'm not the only person having problems with this. Just start with the month of June, then July, then August.

  P.S. I have 2 laptops running XP sp3, one is 9 years old and the other is 11 years old, he had 2000 top PRO, but I just put XP sp3 on it last month. They run too much like fields. I take good care of my computers with a little help from my friend IT. They have the same programs as this one and I do the same things to them, but they do not have this same problem with the release of the MSRT tool. Which leads me to think that it is specific to Vista only, I have a Windows 7 computer yet, so I can't speak for seven.

  Any suggestions or ideas? We are scratching our heads on this one.

  Thank you in advance for your time and help

  Tim Kerr

  Your misguided use of registry cleaners could have caused this behavior! If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~

  Your use of Revo Uninstaller and the foregoing notwithstanding, applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open IE (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. the or shortly after seven 14-10 when the next MRT is scheduled to be released).

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• No free software to solve my problem!

  I can't run any diagcab extension files, I don't have the money to fix, to install and I have not found any free software pricing coming to scan for free. Do you think that you can help me? I can't download net framework 2.0: x 86 (KB829019) because of this (im guessing)

  Hi randall,.

  You did not answer all the questions I asked in the previous post. You currently have an AV program installed or not? If you do not, do it while you collect all the necessary information.

  1 run a full scan with Malwarebytes AV (free Version).

  Malwarebytes.

  http://www.Malwarebytes.org/

  Remove everything it finds, and when you're done, restart and download SuperAntispyware (free) from the link below and also organize a full scan.

  SuperAntispyware (free version)

  http://SUPERAntiSpyware.com/

  When it is done scanning, remove items and found everything (especially the cookies and adware)

  Reset.

  Note: If by chance you are unable to download this software, make a note of the error message that appears and post the exact text here on this thread (not paraphrase).

  2. I would say that you remove PC Tuneup Maestro via Add/REMOVE programs in the control panel and all of the associated files by performing a search. In my view, programs such as PC Tuneup do more harm than good. Just my opinion and other people who post here and I respect their level of knowledge in this area.

  Now, I noticed that you not list a current AV. You have one installed? If you do not, I would recommend that you download and install a copy of the MSE (Microsoft Security Essentials) to protect your system against malice and other bad guys. It's free.

  Microsoft Security Essentials.

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  As with kb829019, why do you think that you need to install it?

  Please uncheck this thread as answered until all your problems are solved,

• Installation of the Dell AIO 926 printer problems

  I have a Dell 530 s computer Vista Home Premium and a Dell AIO 926 printer.  For some time now, I had a problem after printing 3 or 4 times that I wll get a message that the printer Interface was lost or something similar.

  I uninstalled the printer and have installed many times online and on the driver CD.  The printer installs and I can print.  However, for Fax or Scan, I have to go the the program and open it.  When I go to programs, Dell printers, Dell Photo Printer AIO926 the only thing it is the uninstaller.

  I really need to be able to scan.

  Help ~!

  In case anyone else has this problem; I had to turn off my Norton Firewall and it works ~!

  Hi joelash1,

  As you have already reduced to Norton firewall causing the problem.

  It is possible that an exception should be created in Norton firewall to resolve the problem.

  I suggest that first update you the Norton firewall and check if it works.

  If that does not solve the problem, then you will need to contact Symantec for more information about adding exceptions in the Norton firewall.

  http://us.Norton.com/support/index.jsp

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Portege R500: Fingerprint Software and VIsta SP1 problems

  I encounter another problem which seems to be related to the fingerprint software. If I install the software, no issue arises. Once I register the fingerprints, the system slows down. Same clang of the other computers in the domain, in that I am, the response slows down gradually and then fails several times, before becoming inaccessible.

  Then as Exlopre crashes after a while. If I can stop the command, it hangs at the screen bright blue vista saying "logout". Then, the only way to turn off the computer is by holding down the power button.

  I log back in again once, unregister the fingerprint and all works well.
  Any idea? Thank you

  P.S. The software and drivers Vista SP1 and Toshiba are fully patched/updated

  Hello

  I am interested in your question, you are connected to a domain and use the fingerprint software in the network?

  Well, how it works in the Working Group?
  Have you noticed the same slowdowns system using laptop computer not connected to the network?

  Please check this because I guess that there is local connection between domain parameters (server) and your stored settings on the R500.

• A40: problems, I think that with a hard drive

  Hello! Bit of background - had a laptop Toshiba SA40 ISI during a little less of 2 years, and there have been some major problem with it in these last days (until then it had been beautiful and functional with brio).

  He started working yesterday incredibly slowly, took forever to load, kept on crashing etc. After the restart for the 5th time, it would have just send me to the "Windows didn't load correctly screen ' and ask me to select an option, and whatever that I did sent me to the toshiba load screen, Windows does not at all.

  So I had use the product recovery disks and reformat the hard disk. For half a day, the laptop was working once again excellent, no problem. Then this morning, out of nowhere, it completely crashed again. I rebooted, and again the same problems appear. But now I can't used the product to reformat recovery disks. A few times he reformatted then the screen became all black. The error messages became more in worst - now, when I'm trying to recover, comes up with an error message:

  GDISK (e) cannot write to sector 0 of the fixed disk 1 - the IDE controller error

  F0ollowed by a little more information, I have not a chance to note that the screen then recovering flashed, then the screen says:

  !!!!!!!!!! Error!

  Then a screen that says:

  DAY 02/05/06
  Error No.: 11030
  Message: Invalid destination drive

  He has gradually deteriorated. I think there is a problem with the hard drive, the previous messages referred to make it incapable of partition. It is quite anmnoying as it came straight from heaven. Everyone has experienced or heard of something like that? Anyone know what is the problem or what to do? How do you think it will cost you for difficulty? I don't know if it is covered by the warranty, or if this series comes with 2 year warranty.

  Any help would be much appreciated

  Russell

  Hello

  If the warranty is valid, then all replacements will be done free of charge. If you are not 100% sure so call the Toshiba service in your country. Please note; If you open the notebook (remove covers) by yourself if you will lose the warranty.

• Satellite C660-125: Software Message: cooling system problem

  It has detected a problem with the cooling system please pay immediately the computer and return it for service

  This message appeared recently, pc works well and only bought last month, is an isssue of software and how can I solve this problem.

  Hello

  It seems that it is a software bug. You should recover the laptop using Toshiba HDD recovery or Toshiba Recovery disk that you create by using the recovery disk creator

  Usually the message should not appear in the future

  But don t be afraid if you didn t notice a higher temperature, and if the laptop only turns off automatically, then everything should be ok!

• 700 AIO monitor display problems

  I got a Lenovo Ideacentre AIO 700 for Christmas and once through the initial updates after a black screen reboot, when I connect it to my TV it will go through my tv, but no more detects any other screen, how can I go back on the screen of computers?

  In response to customer relationships of the black screens intermittent when the 700-24ISH AIO devices are turned on, Lenovo comes from Lenovo IdeaCentre AIO 700 scalar fonts improved Firmware to solve this problem.

  The CONSULTING Service is available here: https://support.lenovo.com/us/en/documents/SF16-I0006

  The firmware can be downloaded here: http://support.lenovo.com/us/en/downloads/ds111714

  Thank you