Similar Questions

• BlackBerry software can not connect to the Blackberry link (cannot communicate with the device)

  
  

  -Very well, no body does help.

  I solved it myself: disable the automoatic driver installation in 'device and printer.

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Windows cannot communicate with the device he resourse (primary DNS server).

  Original title: primary dns.

  Help, please

  Windows cannot communicate with the device he resourse (primary DNS server)

  Please help me solve this problem

  If you see a 'FON' signal wifi on your PC and you have signed up to "FON", you should be able to connect to it.

  If you look on your BT router (or router you pay BT for the primary connection) on its homepage it should show something like "State of the Wifi BT. If it is active, you should be a member "FON", if it is not active then you need to register and agree.

  BT has their own support forum if you have not already tried it - https://community.bt.com/

  See the FAQ here - http://www.btfon.com/support to ensure that you are connected properly.

  in particular:

  How can I connect once I connect to the correct Wi - Fi network?

  Once you are connected to the correct wireless network, launch your browser. This should load the Fon login page. Select Fon among the three options on the login page, enter your e-mail address and password and sign in. Launch another browser and you are ready to access the Internet

• Cannot communicate with the device or resource - primary DNS server

  I have problems with my laptop using windows 7.
  I was able to connect to the internet until the 19/08/12 to the evening.   After having been online earlier that evening and closed, I rebooted the computer and found my computer connected to the wireless network but had access to Internet 'No '.
  Network Diagnostics has revealed: "Windows cannot communicate with the device or resource (primary DNS server). I had a full signal strength and I introduced myself to be connected to the network, but there is "no internet access.
  I have several computers and have no difficulty in connection with any other device (computer, video streaming, phone), to the internet through the network, home.
  I tried and am not able to connect wireless or ethernet over any network cable (tried 3 others) but can connect to these networks using other computers, telephone, etc.
  I have not recently installed/uninstalled anything.  System Restore says the last restore as on 15/08/12 point.
  Thank you.

  Hey, I uninstalled McAfee and that solved the problem.  Thanks a lot for the suggestion and encouragement.  I'm back online.

  Thank you again... Success!

• Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

  Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

  Hi Rachel,

  I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

  • Using a cable or a wireless Internet connection?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  I suggest you to follow the methods in this article and check if it helps.
  http://support.Microsoft.com/kb/2779064/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• Software BlackBerry Blackberry Link cannot communicate with device

  Does anybody know a solution for this?  I'm in Windows 8.

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/49672/tom1359418099212.jsp

  System requirements: BlackBerry link for Windows

  Software

  Windows XP SP3 or later, Windows Vista, Windows 7 Microsoft .NET Framework 3.5 SP1 or a connection Internet active iTunes 10.1 or later or Windows Media Player 11 or higher for synchronization of music

• Windows cannot communicate with the device or resource (primary DNS server)

  I have Windows 7 and quite often when it looks like I'm connected, but I can't go anywhere on the internet, I have run the diagnostics and I get the message that Windows does not recognize that I am connected.  This started happening about a month.   Sometimes, if I refresh the connection, it works. Sometimes I reboot the radio (I'm on an antenna system) and the ethernet is hard plugged into my lap and then it will work.  But the problem persists.

  I want a permanent solution to this problem

  Thank you

  Hello cicada.

  Thank you for your reply,

  To help solve your problem better, could you give us the following information?

  1. Your computer is connected to a domain network?

  I suggest you to disable any third-party firewall/antivirus that can cause this problem. I suggest to temporarily disable the firewall/antivirus and check if it helps.

  Please get back to us with useful information to help you better.

  Thank you

  In response to 1. ... Not that I know

  I'll have to think about whether I want to disable McAfee. I is not comfortable to feel online without anti virus or firewall... actually it's scared the * out of me. I'll see if I can find a way to do and do not get slammed with * from the Internet

  Well, Mr. Ameen, I disabled the McAfee Firewall in favor simply by using Windows Firewall. I made this 3 days ago and I have not had the problem since then, so I'm blaming McAfee.  I wonder if they'll believe me when I tell them and tell them in as nice a way as I can: D.
  Thank you!!!
  Kathie

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• Software BlackBerry Blackberry Link fails to communicate with the device

  I hope that there could be some additional elements that could help with a problem I've seen with BlackBerry link. We have a user who has three computers he uses to back up his passport for Blackberry (depending on its location at the time). A laptop has started to display the communication error, it is stated in the subject line. BlackBerry connection on two other devices have no problem of communication with the phone.

  The device works on OS 10.3.2.2474, although the issue does not appear to be tied to a software update. We confirmed that the user was able to save his device to the affected machine after it has updated to this OS level.

  Initially, when it connects the device to the computer, the BlackBerry Device Manager does not detect a connected device. After change of the cable USB and the realization of step 2 below, the Device Manager and link show the connected device. However, the link always displays the communication error. The user is a local administrator on the system.

  I tried the things:

  1. update to the latest version of link.

  2. retrograde to Blackberry link 1.2.3.56, which is the version installed on two systems of work.

  3 uninstalled link 1.2.3.56 and performed a manual cleanup of old files, such as noted in Blackberry KB35666 http://support.blackberry.com/kb/articleDetail?articleNumber=000035666&language=English, to delete the files from the driver to the previously installed version.

  4 reinstalled link 1.2.3.56, which gave me a perfect match for all the drivers on the affected system and two systems of work.

  5. manually created firewall rules that appear on work mDNSResponder.exe, nginx.exe and tunmgr.exe systems. The application for peermanager.exe rule created on an affected system.

  6a played with .NET. The system was originally installed 4.51. I uninstalled and installed 4.0 (which is the version required by the 1.2.3.56 link). Later, I've upgraded to .NET 4.52.

  7 off completely Windows Firewall and antivirus on the system. Neither touched the issue.

  8 connectivity test using another profile of Windows user on this system and later another device Blackberry OS 10. Reproduce the issue with the two tests.

  9 Ran through all the other suggested steps in the article noted in step 3. An oddity I noticed during these controls: under the Windows user profile, I am unable to ping the IP assigned to the device. This prompted the tests with the Windows Firewall and AV out. However, when we tested with a different user on the same system (with Firewall and AV) on profile, we are able to ping IP assigned to the device. This allows however for us to communicate with the device via link, however.

  Not to mention that the redefinition of the system (which, in my opinion, is far too radical to get this software to work), I hit a brick wall with items to check then. Has anyone else experienced this problem and it is resolved through a different way? Any comments would be greatly appreciated.

  Well, I guess everything he needed, it had happened to a point where I thought I was out of options. We finally got this device communicating by link.

  I had run across this article during my first troubleshooting http://support.blackberry.com/kb/articleDetail?ArticleNumber=000035829 and it is a problem, because we already had 4.51 .NET on the system and tried to reinstall it think.

  I went down the .NET 4.5 system, and of course link works again.

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• Cannot communicate with the first DNS Server (169.126.63.1)

  Hello
  I have recently had problems with my internet connection and therefore cannot get on the internet at my place when it used very well. I have a wired connection usually, but tried to install a router but now even the wired connection doesn't work and I get the message "Cannot communicate with the first DNS Server (169.126.63.1)" I tried many things and even reformatted my hard drive, do a reinstall system, different setting reset and still it does not work. Hope someone can help me in this situation. Thanks to a bouquet.

  Here is my information

  Hello

  1. have you done any software or hardware changes to your computer recently?

  To work with this issue, I would say that you try the methods below to resolve this issue.

  Method 1:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2:

  
  Step 1:

  Let us reset TCP/IP and check.

  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357

  Step 2.

  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in the installation - basic configurationcategory.
  3. scroll down until you see "DHCP Server"- if it is disabled, select 'Enable'.
  4. enable DHCPif you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click ' Save Settings '.

  Step 3.

  1. click Startand then clickControl Panel.
  2. go in network and sharing Centerand then click onchange adapter settings.
  3. right click on Local area connectionand selectProperties.
  4 Select Internet Protocol Version 6 , and then clickProperties.
  5. click on get automatically a DNS server address, then pressOk.
  6 select automatically an IP address to get.
  7. repeat the steps for Internet Protocol version 4 as well.

  Also visit these links:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Hope the information is useful.

• N911a HP Officejet Pro 8600 error scanner cannot communicate with the computer.

  Original title: is anyone has the sweep of HP Officejet Pro 8600 n911a problems when you use Windows 7 Pro?

  Just bought this laptop of HP Pavilion dv6-7138us, and had the updated operating system upgraded to Windows 7 Pro, directed by Office Depot until I take possession.  The all-in-one HP Officejet Pro 8600 n911a (bought a few months ago) will be analyzed to this laptop.  I can't access "managing the scan of the computer."  When I try to open the scanner of the icon, the message begins with "scanner cannot communicate with the computer."  I was on the HP support forum, tried to uninstall and reinstall the driver, even tried to download the driver on the net, you run printing HP & scan doctor, tried all disconnect them reconnect restart options, all without success.  The functions of printer normally with this laptop and the printer function scanner AND correctly on other two laptops running Windows XP Pro.  Which makes me suspect that this is a problem Windows 7 Pro.  Could this be just?

  My apologies if this isn't the right forum for my problem.  Please redirect me if this is the case.

  Any real help will be GREATLY appreciated.  It's so frustrating!

  Thank you.

  Hello

  1. you have any security program installed on the computer?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to disable any anti-virus program and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You can also run the printer Troubleshooter and check if it helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 3:

  I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  See also:

  "The computer cannot communicate with the scanning device" Error message in Windows Vista

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&DLC=NL&DocName=c00852756&LC=en

  I can't scan in Windows using the HP software

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02661093&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=4323659

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.