Do I need to reformat my DVD-Ram, when he shows no free space and used space is all blue

Similar Questions

• Equium L10 needs a driver for DVD - RAM drive

  It's rather embarrassing, but these days, I found that somehow, the driver for my DVD RAM (Mat * un UJ830s) is somehow damaged or missing.

  I searched high and low on the net to find the right driver to reinstall, but I can't find a single thing.

  Do not can someone help?

  Do you mean simply common driver for the carpet * a UJ830s?
  Windows generally use the common Microsoft OS driver and usually you will not find a Toshiba driver for this device.
  OK, on the page you will find a DVD - RAM but it s only for reading and writing to DVD-RAM media.

  Attention if you use DVD-RAM disks in the drive of DVD MULTI data cannot be written to a DVD-RAM disk, while the function to write data on discs CD-R/RW standard Windows XP is enabled.
  A message is displayed when this function has been enabled, so when using a DVD-RAM disk, take into account the teaching given in this message by unchecking "enable CD writing on this drive.

• Hi, my dvd player does not show on my computer and Device Manager. can someone help me?

  Hi, my dvd player does not show on my computer and Device Manager. can someone help me? HP dv6700z laptop.

  # It is now showing there either. Thank you.

• laptop, needs motherboard replacement, subsequently, I, again, would be able, who, access to and use, the CS, Master, collection, previously installed?

  Computer laptop with already installed CS6 Master Collection needs a new motherboard replacement. Access to use the software, it would be better to go ahead and replace the motherboard? Or, remove the hard drive and reinstall on another laptop? Initially, I bought the laptop with all the pre-loaded software.

  You will be able to reinstall the software as long as you have the serial number needed to activate.  You should check with the company that sold the machine if they did not support installation with it.  The downloads are available through https://helpx.adobe.com/download-install.html

• How to reformat usb pen with exfat top shows 0 disk space file, but health and on computer management says I 63.12 Gb

  Hi all

  I have a 64 GB mine says its usb pen got 0 disk space but under properties, but on the management of the computer my disk got

  :-

  layout of type file system state ability to free space

  Partition the healthy basis 63.12 63,12 of Go Go

  I can't get my usb with xp pen

  Any HELP would be welcome

  I found a freewere site c.net used this program to the window format stick b4 closeing put one any file on it and then you can format with windows and only had my usb pen works here is the site

  http://download.CNET.com/HP-USB-disk-storage-format-tool/3000-2094_4-10974082.HTML?tag=mncol;1

• Qosmio G20 - DVD RAM i/o device error

  Hello

  I need help.
  My dvd ram driver do not work dvd.

  When I run the dvd he told me "the requested could not be performed because of an i/o device error" and I don't know how to fix it.

  Try to remove the optical drive from Device Manager, and then restart your laptop.
  The reader should be recognized again and correctly installed.

  Please try to test again the feature with CD or DVD media.

  You can use ODD as boot device?
  ODD is displayed correctly in Windows Explorer?

• Equium A100-549: Mat * un DVD - Ram UJ - 841 s is not accessible

  Hello
  I have read many topics all about problems with this unit, makes me regret buying the laptop, but for now, I'll have to try to fix it. My DVD device, I cannot access it if I put in a blank DVD or CD-ROM drive. When I click on the camera by computer or of the auto run pop-up menu, an error message appears saying "D: is not accessible incorrect function". If I insert a disk with some data on it it reads it quiet easily (DVD and CD-ROM of so it's not the calibrator laser). After reading works around the problem, I did the following:-

  -First I tried accessing the page of toshiba and reloading the drivers, without success

  -J' the continuation of many shooters of boredom, unsuccessfully tried

  -J' even tried formatting my laptop and reinstall windows (incidentally this violates my warranty and insurance?) and subsiquently once again, without success drivers

  I need help, and not only its desperate thank you very much!

  Hi André,.

  First, reinstall your system from the recovery CD will affect your insurance or guarantee. You can reinstall as often as you want.

  As for you problem with your optical drive, the first thing to check is that the option "Enable the Reording CD on this drive" is checked in the properties of the device option. Just right click on your optical drive in ' my computer and then select Properties option then the "recording" tab

  Finally, you shouldn't have to download all the drivers for your scanner, Microsoft base drivers are generally quite adequate. Usually, the drivers of Toshiba DVD-RAM support formatting of re = writeable disks and not the functioning of the drive itself.

  Kind regards

• I:\ is not accessible .__Incorrect function___and in the other CD as__Blank that allowing open, DVD RAM, changing to CD player by inserting a correct DVD.

  System configuration: Windows XP with SP3 (Original) and all other Microsoft updates. An engraver of DVD from LG (HL - DT - ST DVDRAM) - SATA & Samsung DVD writer (TSSTcorp CDDVDW SH-S222A SCSI) - PATA later do IE August 2010 & September 2010 with the latest firmware, Nero 8.

  On a previously written DVD Insert, complete correct IE fully functional in other dvd burners / rom, DVD RAM icon changes to CD with two blank CD showing player one and not accessible with the message above in the other happening too the DVD-RAM to CD drive.

  Not understand, reported the problem to the company service centers assuming failed drive to be replaced during the warranty period. Provided with other drives of different model but unfortunately same case again. Searched the Internet, consulted and I have tried all sorts of remedies, but without success. Although all CDs, written or purchased fully functional, only previously written DVD.

  Then tried the solution of Microsoft Solution Center as "Mats_Run.dvd". Same here as that 'Please insert media readable by the CD/DVD drive [I:].  Windows tried to open the CD/DVD drive for you. "and finally as ' media in the CD / DVD drive is not readable (TSSTcorp CDDVDW SH - S222A SCSI CdRom Device' with the status"not set".)

  Wasted a lot of money and time behind this problem try this this, but without success. So looking forward to you for that my major problem not identified as an emergency like with me for needing to use these data. Again, no problem at all on my side of the machine and quality DVD that are required to access. And kindly, as soon as possible. Thank you.

  Lately, just after the announcement of this problem, insert a blank DVD to check DVD writing. And yet even ONCE - DVD RAM changing to CD player in both and in the above statement PATA and SATA a blank CD. Sense DVD is not reading as well as writing. Please add this also.

  Hi Sreeparno Baksi,

  Try the methods below:

  Method 1:

  Uninstall Nero 8 on your computer. You can check the link that help you with the steps to uninstall program to add or remove function below: how to change or remove a program in Windows XP: http://support.microsoft.com/kb/307895

  Method 2:

  Delete manually the filter upper and lower filters from the registry editor. See: (Section: fix it myself: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116 )

  See also the link below: Advanced Troubleshooting for issues that occur when you are installing a new CD or DVD drive in Windows XP: http://support.microsoft.com/kb/314096

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• After recovery installation DVD-RAM has dissappeared since 'my computer' - P100

  Hello everyone

  After that I used my CD to recover my DVD-RAM has simply disappeared from "my computer" and in device in the Properties Manager it gives me that it could not load the driver for this hardware because it is missing or damaged (code 39).

  If anyone knows how to fix this I would really appreciate it.
  Thanks in advance

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  It is a beautiful subject with the solution ;)

• P20 S203 MAST * cannot DVD-RAM UJ-811 DVD format

  Hello
  I am the owner of a Satellite P20 S203 PSP20E-08J1Z-SL, who works with a CARPET * device DVD-RAM UJ-811.
  I can read and write CDs.
  I can read the DVD also.
  But I can't write DVD!. When I try to format the DVD with the DVDForm tool, it does not work. Even when I right click on the DVD device, the option "format" appears. However, this device is a device of DVD r /-RW. Anyone know why I can't format DVD?.
  Thank you very much. Philbo

  Hello

  Please check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3284&messageID=10177#10177.

  As much as I know Satellite P20 has installed a small tool that can be used to format DVD-RAM disks, but not for the DVD - RW.

  Good bye

• DVD-RAM GH60L CODE 39

  I HAVE A PC HP COMPAQ CQ3495AN, PURCHASED ON 01/08/2011. I NOTICED THAT THE DVD PLAYER IS NOT WORKING. WHEN THE ACTIVE DEVICE MANAGER IT SAYS DRIVER MAY BE CORRUPTED OR MISSING CODE 39 (HP DVD-RAM GH60L). TRIED THE UPDATE DRIVERS AND UNISTALLING TO NO JOY.

  Description CD-ROM drive
  Loaded media no.
  UNKNOWN media type
  The name HUAWEI Mass storage USB Device
  Manufacturer (Standard CD-ROM drives)
  State error
  Transfer rates 36000.00 KB/sec
  SCSI target ID is not available
  PNP ID of device USBSTOR\CDROM & VEN_HUAWEI & PROD_MASS_STORAGE & REV_FFFF\8 & 17D52EA1 & 0 & 1234567890ABCDEF & 0
   
  No available drive
  Description CD-ROM drive
  Loaded media no.
  UNKNOWN media type
  Name hp DVD-RAM GH60L
  Manufacturer (Standard CD-ROM drives)
  State error
  Transfer rates 0.00 KB/sec
  SCSI target ID is not available
  IDE\CDROMHP_DVD-RAM_GH60L___RD01___\4&BD10ABE&0&0.1.0 PNP device ID

  DOES THAT MEAN SOMETHING TO SOMEONE, PLEASE.

  THANKS BOB

  Hello

  Please try to fix:

  http://www.ehow.com/how_4693117_dvd-Device-Manager-error-codes.html

  Good luck.

• Satellite P30-DVD Ram

  Hello I have a satellite p30-110 which has xp pro on it I am writing on DVDs and have updated the driver from your site and the dvdram software, I checked the box in the properties that allows the cdr so I can write DVDs but when I try to format a blank using dvdform dvd it says blank dvd is notsupported media.

  I use version 1.1/2 x review Spped DVD - RW 1.0 that allows from 1 x to 2 x 4.7 gb data disks for registration are the right - drive says it's one my * a dvdram uj-820 s. could you please help

  -Please email - [email protected]

  Hello

  one of my friends uses his P30 also with XP Pro and WinDVD software to bury.

  It works very well!

  Tried other burning software yet?

  Goodbye Chris

• When I'm able to take my windows 7 installation from the dvd media when I do the installation?

  I want to install windows 7 and I was wondering if I can take the dvd from the drive after the installation. Or should I keep it there to set up the hardware and install the video drivers?

  I want to install windows 7 and I was wondering if I can take the dvd from the drive after the installation. Or should I keep it there to set up the hardware and install the video drivers?

  Know not why you need to release the DVD (unless you are installing on multiple computers and you need the DVD as soon as possible - which case I suggest you get some 4 GB USB sticks and making the installation media bootable off of them for speed and flexibility in this situation - but once the files are copied and extracted - you can remove the DVD.
   
  If you ask because you are caugfht in a boot loop - just change your BIOS settings so it starts on the second CD/DVD drive and the hard drive first and then determine what needs to specify the bootable media to power on the key combination (for example, Dell is F12) and the press who After turning on the machine until you get the selection menu and choose the DVD of the first hour and then ignore it from there on.

• Carpet * a DVD-RAM UJ-850 s does not read blank media - need new firmware

  Hey I have a laptop Equium only around the age of 4 months.
  Had nothing but problems with the CARPET * A DVD-RAM UJ-850 s ATA Device drive.
  I need to know where I can get the update of the firmware.

  Firmware for it, that she will not read blank media.

  I agree with master... I don't know what kind of problems you have, but if the player doesn't work properly, it must be replaced. The warranty is certainly valid and the nearest authorized can help you with it.

  Maybe you made a mistake. Take your laptop to the nearest service and show them what you mean exactly. Here, we can only speculate what may be your problem.

• Need driver CD/DVD RAM for Satellite L20 - 206

  Could someone please tell me where I can get a download of the driver for the carpet * a DVD RAM UJ - 841S?

  Hello

  just a quick question: why do you need drivers for a player that is automatically recognized by windows and doesn´t need to separate all drivers?

  If your reader is not working properly, then there may be another reason for. Have you encountered problems, which then you lead to the conclusion to the research
  for some drivers?

  welcome them