Software, is drive Image, dangerous for XP?

Similar Questions

• Pavilion g6-1108er: software and driver results for: HP Pavilion g6-1108er Notebook PC

  Software and driver results for: HP Pavilion g6-1108er Notebook PC http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-1100-Notebook-PC-series/5082224/model...

  not download the driver on my laptop.

  We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page. (c)

  Where can I get the drivers?

  Hello:

  It looks like all the drivers, specifications and manuals are missing from the pages of support again.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  Whether the weekend will not help much either.

• What software and what driver is needed for cononpowershot A10 digital camera?

  looking for software and driver

  You don't need to be.  Just slightly the cable supplied with the unit or one of the readers of SD cards.  With cable, you plug one end into the camera and the other into the USB port and then turn on the camera.  A wizard will open that allows you to copy the photos on the computer.  If you have a SD card reader, you can remove the card from the camera and put it in the drive and then go to the map as you would with a flash drive.

  Good luck.

• Is it dangerous for the HARD drive, the icon she samples D:\?

  Is it dangerous for the HARD drive, the icon she samples D:\?
  .. The example of the start menu button is also in D:\. (Classic interface)

  I downloaded the 'old' Nice and exchanged icons on my desktop.
  The user, workstation, trash ones and two new folders using the icons for them also.

  The question is - I moved these new icon samples in D:\ (which is not the main drive) and I was wondering if the PIN that reads the HARD drive is physically mobile all the time on one side of the disc to another. Because the icons are located in the D:\... and these icons are defined on elements that are found in C:\, lol!

  so I was wondering If it damage the hard drive (physically)!

  Please answer, thank you!

  Hi Kaloyan,

  Keep the icons in the D drive or any other drive which is not the main drive does not affect the HARD drive somehow.

• HP Color LaserJet MFP M277 Pro: No software or drivers are available for HP Color LaserJet Pro M277dw MFP

  Trying to download the latest drivers (I couldn't scan with Easy Scan more after the release of macOS sierra 10.12) I received the following massage

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-m277-series/7089945/model/...

  No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product home page.

  PS: My OS has been identified correctly in the web page.

  Hi @pisca46,

  Thank you for joining the HP Forums!

  I understand that there is no drivers for your HP Color LaserJet Pro MFP M277dw on Mac OS X 10.12 Sierra. I am pleased to see that for you!

  You are right that there are currently no drivers available at this time. In the meantime, I suggest trying the rest of this guide, of install a printer Mac driver by using Apple Software Updateand then try using the Apple Image Capture.

  Otherwise, all we can do is wait for the drivers and software provision, or plan to use an older version of Mac OS X.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Recovery software data and the partition for Vista?

  I have a HP desktop computer that started having problems starting. Startup Repair couldn't fix, but showed "no OS installed. I guess it's a corrupted MBR/MBT problem.

  In any case, I made the fatal mistake assuming that Vista has the same functionality of XP restore/recovery and would simply repair the file system not complete format/reinstall. Within two seconds, I realized that it was reformatting the drive and disconnected from the computer (because you can't give up a recovery).

  Now, of course, the player starts not at all and displays "No MBR".  I removed the disk and put it in an external USB box to see the content. It only shows a new Windows and a few other folders with one or two files system in them.

  Anyway, I know that all the old data has been not overwritten in 2 seconds, if it is still there. Not to mention, HP no longer ships of installation disks of Windows and preload in place of the images in a separate partition. I need to recover this option to re - install Vista, in the worst case scenario.

  So, I need/file recovery at least get software partition all my data. There are a hundred apps out there, and it is difficult to tell which are the best (they are quite expensive). I can't find any reputable sites that do an actual test on the Soft full - for example, C/Net only tests the features of the limited demo version.

  At the very least, I would like to recover my lost data on an external drive, then recover if possible, the installation of Vista partition and do a clean install on the disk.

  Are there apps free open source reliable and easy to use? So far, I am considering

  EASEUS Data Recovery Wizard Smart Partition Recovery

  Try this info below.

  You may need to contact the data recovery for it experts.

  Be warned: they are very $$$.

  Data recovery:

  Use Knoppix Live CD to try to recover your data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• iCloud Drive away ask for update that I have already installed (Windows 10)

  So I have a laptop running Windows 10. I have both iTunes and iCloud drive installed on it. Whenever I run iTunes, it automatically checks if any of my software apple has updated. For some time now, he always tells me tht there is a update available for iCloud (it was 5.1, now it's 5.2), but no matter how many times I install the update, the next time that it checks that he offer me the same update again. How can I make the auditor undeerstand that I already have the latest verson of iCloud Drive? I guess that a registry entry might have gotten messed up somehow...

  Thank you

  schawsk

  Is there anyone who can help at all?

• Hard drive and RAM for Pavilion dv6 - 6123cl

  Hello! I want to change my ram and my hard drive. The ram will be 8 GB and 2 TB drive, I wonder if I used the hard drive, if supported? and with regard to the ram, if I have to buy one that is compatible or anyone served me?
  
  Thank you! : smileywink:

  Here is the Manual:

  Repair manuals

  You are located in the United States? If not, where? Country only just so we can connect you to a source for hard disk and memory.

  Page 62 on the hard drive and 66 for the memory.

  You must open the door to the memory and see if you have a 4 gig stick or a 2 x 2. If you have 1 x 4, you just need to get another to have 8. If you have 2 x 2, you need get 2 x 4.

  You need DDR3-1333 mhz SO-DIMM memory and you need a 2.5 inch width 9.5 mm thick hard SATA. 2 TB disks are not really available on the market. 1 TB is about as big you'll find there.

  Post back with your country of residence, and we can connect you to a good online store. If your hard disk does not well at the moment you use the HP Recovery Manager to burn DVDs to put the software on the new recovery disc.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion p7-1234: can not find the driver Ethernet HP's p7-1234: not found on the page HP Software and Driver Downloads

  For the life of me, I don't see an Ethernet driver on HP - Software and Driver Downloads page support

  I have collected all the other drivers that I need for a pure Win 7 install, Chipset, video, Audio and WIFI, etc., but not Ethernet?

  I have just the lack?

  I thank you for your time and assistance.

  @harlanopolis

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55679.exe

  REO

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Driver SATA XP for Netbook dv6-3109ea

  Can someone provide me with a link for the driver concerned? There is no XP drivers (not that I would of should it be) available in the usual Support/drivers section.

  Thank you

  Stephen

  Hi, Stephen:

  HP only supports the use of the PC for the current operating system in force at the time of the PC.

  People who want to install other operating systems must do so because of their own, or buy a professional PC where HP provides it support and drivers go back to XP on the PC's current company.

  You'll have a hard if impossible task, get the audio and video to work on XP.

  Here is the link to the SATA AHCI drivers you need.  Second download is for XP 32 bit.

  Take a look in your device manager, expand the IDE ATA ATAPI controllers section and note the name of your SATA AHCI controller if you plan to install the driver to the F6 using a USB FDD prompt.  You cannot use a USB flash drive.

  I think this will be one of the following conditions:

  Intel (r) 5 Series 4 Port SATA AHCI Controller

  Intel (r) 5 Series 6 Port SATA AHCI Controller

  Intel (r) 5 Series/3400 Series SATA AHCI Controller

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21730&ProdId=2101&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType=.

  If you plan to integrate the drivers, then I recommend you wake each other.

  If you need information on how to integrate the drivers please read the info at the link below. Read the Intel section

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  I'll make sure that you can find audio and video drivers for XP before you continue.

  This guide may be useful to find you the XP drivers.  It's kind of old and I don't think that there is help for the graphic solution specific to your laptop, but the audio section can help.

  Read the information in section models difficult.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/General-XP-downgrade-Guide-for-HP-laptops/m-p/83267#M12776

  I took a quick glance and can't find any specific video driver XP for switchable graphics in your laptop.

• Trying to connect Samsung device but he repeats to me it's installing the software device driver.

  So whenever I try to connect my Samsung Galaxy S4 active on my Windows Vista computer all it say is that is install the driver software of device, then it will say software successfully installed. So I'll start button, and then the computer so I can get the files on my phone, but nothing is there, then a few minutes later in the corner he'll say it's install software device driver, again. I don't know what the problem is. My camera says it is USB MTP, so that I can transfer files, but it does not work. My device used to knit then I updated my computer, it has been for most of the security stuff, I don't know if maybe that has something to do with it. Help, please. Thank you.

  Hello

  Try the solution listed in this thread of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/problems-connecting-Samsung-Galaxy-S4-to-Windows-7/bb1a1d2d-c30e-4AFA-93e2-3364b86692b5

  Have you tried to download and install the drivers yourself, then plug in the usb cable?

• "software device driver has been properly installed.

  I have a problem connecting my printer hp deskjet 1000 to my laptop (vista). A message appears to say something as the software device driver has not been installed successfully?

  Thanks for your time.

  Try to delete the file INFCACHE.1:

  Windows Vista / USB device detection issues
  http://www.thedave.ca/geek/Windows-Vista-USB-device-detection-problems/

  Also check your cable if its not working properly.

  HP support & divers
  http://WWW8.HP.com/us/en/support-drivers.html

• need driver or app for ' beats audio control center "for HP Envy 14 1110nr

  Hi all

  I have a HP Envy 14 model 1110nr. A while back I reformatted my computer and I tried to restore it to its 'presets' and something went wrong during the format. So I tried to use my recovery disks that I had done and for some reason whenever I got to the last disk as 86% done I would get an error and the installation from the recovery discs would not work.

  For awhile, I thought maybe that could drive was bad, but after much research, I saw that a few people with my laptop even "HP Envy 14" had exactly the same problem in trying to use their recovery disks. If a guy said that he solved the problem by downloading Windows 7 64 bit and fresh install of iso of windows 7. So I did and it was working fine, and now I have my laptop works very well. One thing however that I do not have the Beats Audio Control center app came with my laptop. I tried to look on the official site of HP drivers however I can't find anything that has to do with «Beats Audio»

  Did someone here knows where I can download either the driver for the "centre of control audio beats" or application if a driver is not required?

  I would like to get the app to control audio specific beats for my laptop-> "HP Envy 14 1110nr".

  If anyone can point me in the right direction, I would great appreciate it...

  Thank you all for your time and your help.

  Here are the specifications of your HP ENVY 14-1110nr laptop computer. Here are 14-1110nr HP the HP Software Driver Downloads page . The original IDT Audio driver is available for download on this page. A newer version is available HERE. The new version contains the control user interface updates audio Beats and audio enhancement.

  Please click the White Star of KUDOS to show your appreciation

• software device driver has not been installed successfully. Digital Still Camera Canon S3IS

  Hello

  Until recently, I was able to connect my canon S3IS to my PC and the device would be recognized and transfer my photos.

  End of week it last stopped. Vista sees the connection, try to install the drivers and fails to this statement: software device driver has not been installed successfully. Click here for more details. The status of details consult the manufacturer of your device to help get this device installed. Digital camera failed.

  I downloaded all corresponding updates of the Canon for Vista 32 bits website. I tried to plug in the camera to other USB ports. When I plug in the camera to the laptop of my wife (Vista 32) the camera picture is recognized and photos are available. I also took the SD card and used a card through a USB Reader and it recognizes the card reader, it wants to format the SD card, which means that he would remove the photos?

  I have all the current updates Microsoft Vista.

  Any suggestions?

  Thank you.

  Hi richardo79,

  Thank you for your message.

  Here's an article that explains the removal and installation of the drivers.

  I suggest using "manually update drivers" section of this article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Problems with USB devices?

  Were new programs or hardware installed near this time?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.