What pcmcia cards work?

Similar Questions

• What graphics card work better with digital painting, Nvidia GTX970 or Table K2200?

  What graphics card work better with digital painting, Nvidia GTX970 or Table K2200?
  I know it's much better to have a framework, if you work with 3D, but the framework is also better than the Nvidia card if I want to work only with digital painting?

  Designer Roberto Blake offers some good advice on the graphics cards and Photoshop here.

  http://robertoblake.com/blog/2014/01/best-video-graphics-card-Photoshop/

  and a link to the landmarks of PassMark Software - graphics (GPU) video card Benchmark

• What WIFI card work in Satellite 110CT?

  Hello

  I have a laptop 110CT (110CT/810 PA1224 YX - EN) Satellite that I am trying to get a wireless LAN card to work with it to connect to my BT home hub. I tried a modern bus adapter wireless card (GWK150 802.11 g) but she comes back as the laptop would not; no light showing power on the card either (I run Win98 SE). I know that the two locations to bus my card work as my TDK DF2814 modem card will work in the other slot.

  This bus card specifications interface is compatible with modern (32-bit card bus type II) wireless LAN cards or changed the standard?

  Perhaps I was unlucky and managed to buy a faulty card? Any information on what WLAN cards or LAN or interface card types are compatible with the CT 110 would be very welcome.

  Thank you, Robert.

  Hi Robert

  It is not easy to get info on this portable 10 years old. The fact is that this device has a PCMCIA slot and you can use 2 x cards of Type II or 1 Type III of x. card I can only imagine that you must put something in the BIOS settings.

  Check all the settings of the BIOS and see if you need to change some settings. I also think that you should try to use a little older wireless cards. Maybe you wait a little too long.

• Satellite Pro A120 - impossible to get a PCMCIA card work

  OK, I have a problem with cardbus (xp SP2) of my Satellite Pro A120.

  I use the cardbus slot to add conections firewire via an IEEE 1394 cardbus card and have been doing this for a long time. The other night, my computer came into hibernation with the card still in the slot and still in use, and when I tried to use it the next day, the card wasn't working at all.
  So I thought that had died on me and has brought another, this one to be exact [http://www.newegg.com/Product/Product.aspx?Item=N82E16839314003].

  When I plug the new card into the slot, windows starts the installation add something new but can't find the driver, nothing on the CD provided, and it does not conect to windows update to find an ethier. Thus, the new card does not work and do not settle, it appears just with! next to pci device.

  I have searched all over the internet to find the driver, read the manual etc. I even did a fresh install of windows so that he could find the drivers but nope.
  The only thing I can think is the slot does not except 32-bit cardbus, but in my manual it says this:

  «The computer is equipted with a pc card slot which can accomedate type II card.» Any pc card that meets the standards of the industry can be installed. Housing supports 16-bit pc cards, including pc cards 16 multifunction card and cardbus pc cards. CardBus supports a new standard for 32-bit pc cards".

  Any help please

  Thank you

  > I can't find drivers anywhere!
  Usually, it takes the CD with drivers with the product. So if you don't have it try to find the driver on the manufacturers support page.
  Try with this one http://www.belkin.com/support/product/?lid=en&pid=F5U222

  Good luck!

• What graphics card work on a p7-1026 Pavilion without a power supply upgrade?

  I just bought a Pavilion p7-1026. This is my first of all the computer set purchase because I always had my made-to-order systems. The CPU and the size of the hard drive and the plug is quite good for the price (I was looking for a cheap replacement for an old office) but I would like to make a few other updates. I'll add another 8 GB of memory, but I would also add a graphics card because I don't like the built-in graphics card.

  Is there a graphics affordable (about $100) with a minimum of 256 MB of memory, which runs on the power supply 250 watt existing and with no electrical connection needed? I watched some, but I've seen as low as 300 watts. If I need to replace the power supply, how can I find a compatible with this system. I looked at a site ('911' something) that has had a lot of listed HP models but not this one.

  Jay,

  Beyond that, you walk down this road, you really need to open the case.

  It only has 4 slots for memory and probably (2) 2 GB and (2) sticks of 1 GB of DD3-1333 PC3-10600.

  Your will does not add anything, you need to replace all with 4 GB sticks (4) If your planning an upgrade.

  New models are hard to return. You'll need to find the power supply model # for all references.

  BTW, this characterization of 250W is mounted. The (constant) nominal value is most likely 200W.

• OptiPlex GX280 minitower - what video card works?

  Hello.. I'm looking for 'the best' video card that fits a GX280 stock.  I welcome all suggestions, especially if you have tried.

  Thanks for the cycles of neuron...

  Chris

  Hi Chris, your guide is HERENOTE from the ADMIN: broken link has been removed / replaced this post by Dell >

  , and it is said that you have a 305wPSU and a PCIe x 16 slot for your graphics card. With that in mind, I would recommend the 9500GT, see HERE. If she says necessary 350w, manufactors overstate their power necessary for their cards, and Dell is understste power for their PSU.

• Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70

  Hello!

  I'm using the Toshiba Satellite Pro 4320 (SP 4320). With the very old BIOS (first) version 1.0, the system has worked well on LINUX (Ubuntu) and Windows XP. So I found the update of the BIOS (latest version on the toshiba Web site). I did update the BIOS version 1.0 BIOS version 2.7.

  Now, I can't use any PCMCIA card.
  Everything works fine, but I can't use two PCMCIA slots.
  The cards will be recognized, but the system says that there is a resource conflict.
  (WLAN/WiFi adapter) PCMCIA cards worked very well with the old BIOS version 1.0, but now it does not work.

  Windows XP says: 'conflict resource' and Ubuntu/Linux said after typing dmesg: "pccard gives wrong answer, for example."

  Please, help me!

  Someone got an older version of BIOS?
  My idea is to 'downgrade' the BIOS BIOS version 1.0 or version 1.x.

  I have to downgrade the BIOS to at least 2. 6.

  Bye,.
  Martin

  Have you tried installing WXP again using Toshiba Recovery CD?
  I mean it's so old model of laptop and I can't imagine that Toshiba will offer this update of the BIOS so long if there is a serious problem with it.

• Satellite A100-259 and PCMCIA card reader no longer works

  I have a Satellite A100-259, I've had for about a year with no problems... so far, the PCMCIA card slot reader seems to have stopped working.

  When I insert a card reader SD PCMCIA discover the laptop hardware as a "PCMCIA UNKNOWN_MANUFACTURE' and subsequently can not find the drivers for it. I tried a couple of different PCMCIA devices and get the same question every time, I checked also double the card reader works by trying it in PC laptop Toshiba-not to the woman.

  The PC is a XP/Vista installation start-up duel and I get the same question under each operating system. I also think that it may have started after I installed upgrading the BIOS to 2.20.

  Any suggestions would be greatly appreciated, b
  Kind regards.

  Try to access the BIOS and set the defaults.
  Don t forget to save the settings after the change.

  By the way; Are you trying to reinstall the PCMCIA driver?
  Go to the Device Manager and remove the PCMCIA computer location.
  Then restart the laptop and check if Windows detects and installs the removed slot.

  Good luck

• Satellite 105-S157: USB 2.0 via a PCMCIA card does not work

  I installed the pcmcia card with BIOS update V2.1 and work under WIN XP sp2.
  It seems to work normally in Device Manager, but when I plugged in the USB, it may not recognise.
  If I can access usb PCMCIA ports.

  This laptop does support USB 2.0?
  How can I make it work?

  Please help?

  Thank you

  Hello

  It is a brand new model Toshiba and I guess that it supports high speed USB 2.0.
  Sometimes, the operating system can not recognize external USB devices due to the limitation of power. The fact is that the USB port gives the 500mA. It is a standard value.
  If the USB device use a higher power, the OS cannot recognize and activated the device.
  In this case the external power supply is necessary. Another possibility is to use the USB hub with an external power supply.

• Satellite 2410-413: USB2 PCMCIA card does not work

  Hello. This is my first time on a forum, and my English is bad.
  I tried to install a card PCMCIA 4 port USB 2 (hw & sw) on my Satellite 2410 413 in order to use a dongle of DTV (hw & sw).

  This will not work: ports seem to be declared straight into the computer, but in fact, a simple key memory 64 MB USB-2 [a Sony "micro-vault" key), won't work, and neither will the Winfast DTV dongle.]

  Paradoxically, both the key mem will work on any of the three USB-1 ports, and the DV dongle will light on any port USB-1. The PCMCIA 4 port USB 2 card is new. I can't locate the source of the problem.

  Could someone help me with this issue?
  Thank you in advance for your answer. Here it is (maybe?)
  Another way of formulating the question: how USB ports are managed by the system?

  Hello Rasta

  Sorry, but I think that this issue should be the right one for producer PCMCIA. Try to visit the support page. You might find answers.
  Believe me on this path it is not easy to say why this happens. Toshiba is perhaps responsible for the functionality of PCMCIA card, but not used the card.

  Good luck!

• Pavilion a6530f: what video card installed works for Windows 10 and a 300W power supply?

  I have a6530f a desktop Pavilion PC.  I am currently running Windows 7 and am interested in upgrading to Windows 10.  I get and error message when you try to install the W10.  "NVIDIA GeForce 6150SE nForce 430".  I think I need to improve my video card.  Can what video card I install that will work for Windows 10 and is rated for the power supply 300W in my lap?  I'm not very techie.

  Many of these inexpensive graphics cards for Newegg.com should work with Windows 10. Just watch for those who require a 300 watt power supply system or less.

  Drivers for these cards may be on the page drivers GeForcefunds. Simply select the card in the drop-down list or use the "Auto-Detect".

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• P7-1036: what cards work with desktop Pavilion P7-1036

  Hi all

  I have a desktop computer Pavilion P7-1036 with integrated video, Intel i3, 3.1 ghz and 8 GB of ram. already updated the PSU to power internal 500 Watt power supply (ATX-ILG-500R2) run Windows 10 as well.

  I want to upgrade to a video card with HDMI and make a few plays of light. I tried two cards without success, each installation ok but monitor freezes on the splash screen or stays black. After that I removed the card everything works well again. I guess I'm missing something in the configuration or possibly need to know what video cards will work with this motherboard.

  Any help would be great appracieted

  I've tried so far without success of cards

  NVIDIA GE force GT 720 - 2GB

  MSI R5450-1 GB

  Thank you

  Hello

  Dell's OEM specifications may be different compared to the specifications of HP.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

  Thanks for posting on the forum.

• What PCMCIA or USB DAQ card to buy?

  For the purposes of my project, I would like read 2 quadrature encoders and
  2 analog outputs (0 to + 5 V) duty to control 2 Motors simultaneously.
  What PCMCIA or USB card that you would recommend for me?

  The PCI card that I used for the same project was the NI PCI-6221.

  6221 USB would correspond to my needs?

  Best regards
  Fotio

  Yes, that should be fine. You can always visit the DAQ hardware page to find the material for the acquisition of data appropriate for the needs of your project.

• [p7-1240] How can I find out what graphics cards will work with my motherboard?

  I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggle and scouring the internet for answers, I discovered that it is not compatible with the BIOS on my motherboard, and HP does not update the BIOS. I returned the card and is now seeking a new, but I'm not sure what card works now, since my computer meet the requirements of system for the graphics card and it stil ldid does not work. Because the GPU manufacturers do not list the specifications of the BIOS under system requirements, how can I know if a graphics card will work with my system?

  My computer is a p7-1240 with a 520W PSU upgrade and approximeately 11 "of space to install the card.

  Thexn, welcome to the forum.

  The problem is a lot of video cards latest require the computer to have a complete UEFI BIOS.  HP began using one in mid-October 2012.  Before that date, the BIOS is the legacy.  This is why the video card does not work with your computer.

  I don't know what you would spend on a card, but MSI is a GTX 750ti which is a VBIOS hybrid.  It has a switch to change to inheritance or UEFI.  Is there a video link directly below the image of a card.  Paul of Newegg gives a complete description of the map.

  I like the best EVGA cards.  Their Support gave me a lot of information on their cards.  However, you will need to return to a GT 640 map to find one of their cards that does not require the UEFI BIOS.  They have a few updates for their BIOS' are which solves the problem, but we must call them for accurate maps.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• What SD memory cards work in HDR-CX210? I tried 3 with the same C:13:01 error!

  What SD memory cards work in HDR-CX210? I tried 3 with the same C:13:01 error! I tried microSD with adapter sandisk sandisk SD and SONY brand SD cards. I tried to format it so and not luck.  I chose this device for use with memory cards, and he so far has not been very useful for my needs. PLEASE ADVISE!

  Hello Clark,.

  Welcome to the community of Sony.

  This error message is displayed if you use the recording medium is either not supported for use with the camcorder or the support has a problem.

  Check the link below for the memory card, you can use with your camcorder.

  http://eSupport.Sony.com/docs/dvimag/HDR-CX190_CX200_CX210_PJ200_guide/Eng/contents/03/04/02/02.html

  A formatted by a computer (Windows OS/Mac OS) memory card has no guarantee of compatibility with your camcorder.

  Power reset the camcorder.

  1. Turn off the camcorder.
  2. Remove the battery for 30 seconds and then reinsert.
  3. Finally, turn on the camcorder.

  Reset the camera by pressing the RESET button with a PIN object did during 2-3 seconds.

  If my post answered your question, please mark it as an "accepted Solution".