Software provided

Similar Questions

• Serial RS232 between existing Instrument and reading software provider

  Hello.  I have an instrument with software supplier for the acquisition of data from the instrument to a PC through serial RS-232 communication.  I would like to acquire data in LabVIEW instead of via the provider software.  The seller has given virtually no support to help me find a way to communicate with the instrument - they offer only their software as the only solution.

  I'm trying to find a way that I can transfer data with provider software and basically understand the format of the communications and the commands that are required to send to the device.  Two things that seem like possibilities are:

  (1) use a type of "spyware" or "monitor" for serial ports to capture and display the communications that occur between the instrument and the PC/software.

  (2) connect the COM1 port, from my PC (by which the software provider would communicate) to COM1 port on my computer and the insrument for a 3rd COM port on my computure.  Use hyperterminal or LabVIEW to read it as the instrument and software try to pass each other by reading iteratively to a port and then in writing as to the other port.

  No one has tried this before?  Any suggestions on who could work or work better/easier, or any other ideas?  I don't even know the port required parameters (baud, etc.), so I need to guess at those if I tried option (2), above.  I've never used any software serial port "monitor" before, so I don't really know what to use or else it might work for option (1).

  Thank you.

  Hello

  As mentioned, Microsoft Portmon's looks like your best bet.  Here is a link to where it can be downloaded:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896644

• Software provided with Windows7homepremium

  I recently bought a new desktop computer with windows7homepremium. I was told it has not come with any software but windows. No Works Suite, Media Player no, no burning software, anything extra that was taken for granted for years. If I buy a computer of windows 7homepremium now (July 2015) should I buy a microcomputer and a disc burning program etc, etc?

  Windows 7 has built optical disc burning functions base. Insert a blank disc and it becomes a location to save files as virtual destination, the scene only extra is once the complete collection you select to burn to the disc. It will also compile compressed zip files in Solution Explorer.

  Work was abandoned for many years and it has always been the decision of system manufacturers to include this, it has never been a part of Windows itself. Windows Media Player is included by default as it is a basic form of Wordpad Word treatment.

  Windows Live Essentials can be downloaded free Microsoft which includes Photo Gallery, Movie Maker, and a number of other extras not included on the basic disk:

  http://Windows.Microsoft.com/en-GB/Windows-Live/Essentials

  The bundles added by manufacturers has been entirely dependent on what offers they hit upward with software developers, Microsoft never participated directly provide other than their own packages if the manufacturer wishes to. For example, a lot of PC include Microsoft Office but requires the additional purchase of a keycard with the computer to enable

  Otherwise, the load of manufacturer has included 'extras' of dubious quality and value insofar as it is commonly known as bloatware or JunkWare and almost universally hated.

• Re: Satellite A300D-11 t - how to install Windows and software provided?

  Hello
  I have a Toshiba Satellite A300D-11 t (model: PSAK0E-00700DGE.) Due to the mistake of hard drive, hard drive has been formatted and I lost my OS. When I bought it two years ago, the laptop came with Windows Visa and other software. But I don't have any software CD this time except the mannual.

  Please help me how can I have my Visa settings or factory of origin.
  Thank you
  Ben

  Hi Ben,

  The problem is that you must create this disk with Windows and all the drivers/tools yourself if it of not given with the computer. This can be done with the preinstalled Toshiba Recovery Media Creator who creates the Toshiba recovery disc. This disc contains a picture to factory settings (Windows with all the drivers and tools) and can be used to restore the factory settings every time.
  So you need this disc to install Vista with the supplied software.

  In any case, now it s too late and you need to order such a drive of Toshiba directly but it s not for free:
  https://backupmedia.Toshiba.EU/landing.aspx

  Of course, you can install Windows on a normal disc of Microsoft, but then you must install all the drivers and tools yourself so recovery disk is the easiest way and pre-tested by Toshiba. ;)

• How can I change the display settings for the lifecam VX-2000 software provide a mirror image?

  I've tried everything and looked everywhere online.  Can you help me?

  Hi ToniDanile,

  You can change the display settings for the LifeCam software to fix the problem.

  For more information see the article mentioned below:

   

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

  Let us know if it helps.

• What program to burn a data DVD, using the software provided on a 1900 Pavilion's?

  Usage: XP Service Pack 3

  Hi, I'm trying to burn a disc of data on a 1900 Pavilion DVD and I do not know what program to use the suite provided with it.

  InterVideo Home Theater etc is for the movies, but also Windows Movie maker.

  Windows Media Center is not available because until now I can see on thr PC.

  All the tips on the installed with PC suite or I need to install Nero etc?

  Thanks for your reply,

  I guess I assumed that HP would have a package burning in their suite of packages. I don't know if she was there.

  Just as a note of caution the program that I downloaded as it was suggested "Free Easy Burner" it came with a program of "Searchnu.com406" who hijacked my browser.

  I removed it using the restore after searching the Internet for advice.

  Everything seems fine now.

  I thank you again for your help and think that this topic is closed.

• where can I get the dvd software provided with my computer model e1705 to record.

  I formatted my drive and now I can not find the dvd recording sofeware

  Try to go to the website of seller of computers and see the support topic.  very often, you can download this kind of software directly from them. --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Do I need to use the software provided with the wireless hardware to go wireless? __

  I have a router Linksys Wireless (wrt160n) that I am not using. I whant to buy a (Linksys WUSB600N) for my office. I want to know if I need to use the software supplied with the hardware, or can I just use Microsoft Wizard to configure my network? Operating system is Vista Premium.

  Thank you Jeremy will do.

• How to restore the software provided with the dell pc?

  I could try to update some software cyberlink media however if something does not go right or I decide I don't want the upgrade, how can I get the original on my pc software?   I don't have a disc - only the hidden partition and this partition on a USB key.

  Thank you

  

  How to use my Dell downloads

  www.YouTube.com/watch

• Atomic transaction / explanation atomicity for a layman and software provider

  
  Can someone point me to a good blog that explains the concept of atomicity, as described here: atomicity (database systems) - Wikipedia, the free encyclopedia

  This article is a good start, but I was expecting something that went into the details, and I could not find such an article/blog myself. I just find more short definitions, or very short answers in other forums. A hope for a display detailed (and slightly longer) on this subject.

  Background:

  It is not related to the Oracle itself, but in this case the software editor just happens to use Oracle. The problem is that the software contains several places where a single 'transaction user' contains several updates to the table, and the software does a 'validation' on each update instead of treating the entire operation as a single unit. For example: an inventory system that creates a "booking folder" on a point in the inventory. Software updates the record of the inventory table to have a quantity of 'reserved', performs a 'validation', send an email, then creates the record in the table of 'records' booking and emits a commit. If the process out craps on the sending of the e-mail... the item in the inventory table will be pasted into "reserved Qty.", but there is "no record of booking" against her, and therefore no way to 'release' to be 'stuck' in 'not reserved quantity'. The Publisher of the software this is blamed on the fact that the email could not be sent (for some reason any) and doesn't seem to understand that the 'right' thing to do would be to treat the entire transaction as a whole (it fully succeeds or fails completely). I would like something that I can show them who would do a good job of explaining this... And what a transaction like this should be treated together, regardless of any error that occurred during the process.

  Transactions

• Uninstall the software provided?

  How we uninstall the software that came with my laptop Sony VPCZ2390Z?

  Hello M-L-R,.

  Please visit the link below to access the Manager from the Application to the VAIO.

  This software will allow you to uninstall the preinstalled VAIO applications.

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C1004059...

  If this suggestion is useful, please click on accept as a Solution.

• Redeming code of software provided by the school.

  I have a code of redemption of my school, I should be able to download and use my code, but why I have to enter a credit card and paid 200 on top of my tuition which already covers Adobe Cloud?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• MacBook 2007 crashes after installation of the software

  HI all, I have a 2007 MacBook running snow leopard.

  OS X 10.6 (Snow Leopard)

  Office 2011

  2.0 GHz Intel Core 2 Duo

  2 GB of RAM

  120 GB HDD

  I recently tried to install the software provided with spin, the usb controller algorithm Djay to he... Don't know what year, but loaded on an older MacBook running snow leopard...

  Once installed was happening while the software would not be responsible, so I uninstalled, deleted from applications... Now desktop freezes a few minutes trying to do something, it is mainly trying to open anything on the toolbar...

  Any advice would be appreciated, thanks

  You try boot in safe boot mode? SHIFT key is pressed after chime

  Start, and if you hold the key in the correct way and timely, you may need to

  to provide your admin user password to continue in safe mode.

  May have removed the essential parts of the system while it was trying to

  delete the troublesome app; Thus it is likely a reinstall of the OS X.

  In addition to the troubleshooting & using Find to locate all parts of this application

  who could survive, could be performed. Also, you might try it and see that the
  Console logs suggest, according to the exact time/Date of broadcast. --

  You might see if Disk Utility could repair permissions on the hard drive. This

  is different from that of an attempt to repair the hard drive.

  You may need to start the computer from the DVD Snow Leopard system to

  see if you can then use disk utility in the options menu of the installer, then

  See If you can repair the hard disk using this version of disk utility.

  Otherwise, you need to maybe reinstall from DVD and then upgrade the system to 10.6.8

  This shouldn't erase your user account. However, applications that are

  in your user account that might have been part of this problem, can be activated.

  Applications from websites can be problematic. Some of them may contain odd

  bad software tips; According to the reputation of the source, adware, malware or elements

  No wanted or expected can upload with results very unexpected.

  It may be better methods to solve problems or solve this problem. To find out what

  current may require looking at the system logs, among other things.

  The application did not have an uninstall program? If you provide your user password

  during installation, it may request a detailed correct uninstall in order to not

  damage to the other sections of the system. The applications folder is a place to look, if included.

  Good luck!

• Driver Wireless Laser Mouse (PA3706E-1ET1) problem software on Windows XP

  I have a Toshiba Wireless Laser Mouse PA3706E-1ET1 that gives a serious problem with the MouseDriver.EXE software provided on the CD with the mouse.

  * First release _ * _: when you install the driver on the CD I get an error message saying that they are not certified by Microsoft. The documentation that came with the mouse has an additive brochure that says about it and ignore that the software works without any problem.

  * _The issue_ *: with the mouse driver, I get a mouse icon in the windows taskbar and clicking on it will allow me to set up all the extra buttons running. Everything works very well at this point. The problem occurs when I try to shut down Windows (this is Windows XP) it will fail to finish. It seems to me close a few icons in the status bar, but then it stops. I can click on stop again and it still will not close. If I click with the right button on the mouse icon of toshiba in the windows taskbar and click EXIT in the drop-down menu, then shut down Windows and then stops. It seems that the mouse driver is to avoid a stop down. This is what is displayed in the event viewer:

  Event type: WARNING
  Event source: USER32
  Event category: no
  Event ID: 1073
  Date: 02/07/2009
  Time: 10:53:03
  User: NT AUTHORITY\SYSTEM
  Computer: PC
  Description:
  The attempt to shut down the PC

  For more information, see Help and Support Center in [http://go.microsoft.com/fwlink/events.asp].
  Data:
  0000: 00 00 00 00...

  * _Third issue_ *: it is serious, I have Microsoft Virtual PC. When I launch and run any VPC I get a blue screen of death. The error is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the offending component is SysMouseFilterF3.sys.

  If I uninstall the mouse driver that disappear from all of the above questions. The mouse works but not all buttons. Scrolling the mouse left + right, vertical and the back and buttons before work, but the parchment of horizontal tilt and two additional buttons do not work.

  I can't find any mention to my model mouse on Toshiba or the Internet in general. Is there an updated driver for this mouse or in any way I can solve problems above without losing the functionality of the extra buttons?

  -Andy

  Re: Toshiba Wireless Laser Mouse PA3706E-1ET1 (which is appears as 'Sysgration USB mouse' in hardware)

  Yes, Andy, I have the same problems with this mouse. No driver updated (or even original) with a view to anywhere.

  Called Toshiba - all they could suggest "just use the drivers on the CD" and unable to offer any other suggestions!
  No drivers on PC World UK (seller) or Sysgration site or the other.

  Author of the driver (info email the driver DLL) contacted but no response until now.
  SysMouseFilterF3.sys does not seem to be the culprit because it causes a blue screen of death on the startup of the system.
  In order to get the mouse to work I just uninstalled Sysgration drivers and delete the mouse in the hardware list.

  Windows Xp then tried and it seems to work ok with driver default for Microsoft - but only right + left, scroll, front + rear, Alt + Tab appear to function.

  Colleagues, it takes up to a new driver appears!

• Software for HP HDX1060EG Vista 32 Digital Persona needs INTEREST!

  I just bought a HP HDX 1060 EG - Vista Ultimate 32, P8400, 4 GB RAM, Nvidia 9400GT.

  I had to reinstall the whole system, because it is in German and I don't quite understand.

  Now it seems that I can't find the Digital Persona software in English.

  Can someone help me. PLEASSSSSSE!

  I tried the software provided in another post, but it does not work in my case. (Link: SP37618 ...)

  I found it after 3 days of searching.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-64439-1

  Enjoy