Satellite L450D-13U - connections WLan problems

Hello

I use talktalk as my internet provider.
I started having an intermittent connection and the internet on the router light goes red. Its a d-link router.

3 weeks a vist to a bt tech they now tell me that the problem might be my laptop.
How could it when he connects and then removes the iradic same connection.

Hello

You said that the router disconnects Internet. Right?
So how can have this cell phone number? Sorry, but I don t understand this

In your case, I recommend to check the settings of the router.
You should check the update of the firmware and should also check if other computers laptops/computers connected to the same router would have the same problems.

If you are sure that your router is OK 100%, then you should check the notebooks of WLan.
In such cases, it s advisable to update WLan driver

Tags: Toshiba

Similar Questions

  • Satellite L450D-13U - screen will not come

    I have a laptop Toshiba Satellite L450D-13U with 2 GB of RAM and no hard drive.
    My problem is that the display does not illuminate. I tried all the well known stuff and stuff like taking the battery, power down etc button but nothing seems to work.

    Can't even connect to an external monitor. Is there a part that I could change what can help this problem?

    Thank you very much

    Without any serious diagnosis, it is not easy to say what the problem is. Perhaps is faulty display.
    By the way: what happening exactly when you press button walk / stop?

  • Satellite L450D - 11 H - WLan works does not during the execution of a battery

    Hello world

    I have a portable Satellite L450D - 11: running the Windows 7 operating system.

    When my laptop is plugged my wireless connection works fine.
    But when I unplug the unit and just run using the battery, my wireless connection works.

    I examined the power settings and changed the battery option of "Performance Maximum when wireless.

    But I still have the same problem. This could be a driver problem?

    Any ideas?

    Thank you.

    Hello

    Eventually the Wlan card settings are defined security power when the laptop is running on battery power.
    Try this:
    Go to Device Manager-> select WLan card-> properties-> advanced

    Check if there are a few options that could disable energy saving.
    In addition, you should take a look in the last tab. There should be such option also.

    See you soon

  • Satellite L300-1AS: connection WLAN don't Comeback

    Hello

    I'm having a problem of wireless network card. If the connection goes out, it never came (manual/automatic), unless the computer is restarted.
    Is there a solution to this problem?

    Thank you

    Jay

    Hello!

    Do you have the BIOS and latest drivers? Search on Toshiba website and install it:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    I have a Satellite L300 and have no problem when I lose the connection. It takes a few seconds and back.

    Good bye

  • Satellite L300 PSLB8E - connection WLan keeps falling

    Hi all

    Have gotten my Satellite L300 PSLB8E some 2 months ago and since the first day (RTL8187b) wireless is having serious problems.

    Continuous wireless connection drop if other phones that I use at home are very good.
    LAN on the same Satellite works fine as well, it's just wireless problem with this particular machine.

    I have tried to restore the system, using recovery discs, tried every possible update Toshiba as Realtek, but problem remains intact.

    Help, please!

    Mustafa

    Hello

    What version of BIOS you have on your laptop?

    There is a version v1.8 of BIOS on the European driver Toshiba page.
    Check if you have a lower version. If so update!

    In addition, I would recommend WLan driver download Realtek page:
    http://www.Realtek.com.tw/

    You can find the most recent driver.

    Last but not least that it would be a good idea to verify that the settings in the Panel-> WLan card properties-> Advanced tab.
    Here you can change the encryption, the channel and the power saving settings.
    I recommend turning off the energy-saving WLan card.

    You should also update the Vista of the State. I read that Vista has caused a lot of issues that have been fixed with the latest patches and fixes.

  • Satellite M115: Limited connectivity WLan

    I have a Toshiba Satellite M115 for the school and for the last two weeks, it works wonderfully, but earlier this week all of a sudden it connects not to the network wireless of the school (which is free).

    All that he was to tell me who can sense the network but cannot connect solid, limited or no connectivity is the message I get.

    When I go in to repair the network connection, that he could not because it could not connect to the network.

    Is there something that I am missing?
    Or a step I have to take in order to solve this problem, please help if you can

    Hello

    The WiFi network is secure?
    The limited WLan connectivity can occurs generally if the WiFi network is secure and incorrect encryption or key has been used.

    Sometimes it can happen that the WLan signal is not strong enough and therefore you can not connect properly.
    If you use the battery and then access the properties of card WLan (Device Manager) and disable the saving of the wireless network card!

  • Satellite SL20-205: connections WLan keeps falling works

    It has been a problem on my Satellite SL20-205 I bought it, but now it has arrived more irritating. (Intel BG2200) wireless network adapter card drivers are up to date and XP SP2 is installed (but absent on some critical updates to the OS).

    The problem is, since about 2 months ago that I bought this laptop, wireless connections cut market. The Signal is Excellent and the status displays connected during all this time, it's just that I am unable to ping my router Speedstream or access routers GUI and internet. Just as suddenly, I lose my connection to the Wless router, then all of a sudden I recover too.

    I have tried to change the properties of the map Intel Bg2200 and focused on the same channel that set up on my speedstream gateway. My Wireless Gateway settings are as under:
    -------------------------------
    Status: enabled
    SSID: LAB
    Channel: 11
    Security mode: WPA - PSK
    Info security keys: TKIP - lab - 30
    SSID Broadcast: enabled
    Filter Mode: enabled - allow
    Data - RTS/CTS-FRAG: AUTO - 2346-2346
    --------------------------------------------

    I've noticed that when my laptop stops transmitting, LED on the router Speedstream wireless also turns off and all of a sudden when the connection is re-established, the LED also goes.
    All of this, my out the door speedstream Office UTP connection works fine and I can browse the internet.

    I was wondering if it comes to WLAN card and while I'm covered under warrantly, I should get it replaced but I just want to be sure.

    Any Advisor!

    Hello fahim

    If you search the forum wireless, you can see many similar comments. I put t know which driver WLAN is preinstalled, but please check the Intel download page, and also new Toshiba WLAN page under http://aps.toshiba-tro.de/wlan/

    Please be sure to have the latest version of the driver that there are listed. Many users have also reported this problem on some access points, and not on all of them. If a friend you have WIFI at home please try to verify the WLAN connectivity with some other router (other manufacturer).

  • Satellite L350 - cannot connect, WLAN device is disabled

    I just bought a Satellite L350 of second hand, and the wifi does not work properly.

    I'm annoyed because I specifically asked the seller if it was OK before I bought it, so I need to know if a hardware or software problem. It is under Vista Home Premium. The symptoms are if I try to connect to my wireless router [which my other laptop can see and connect to OK] it comes up with a window telling me that "the wireless network device is disabled. Please turn the unit "-of course everything is turned on and active as it should.

    Someone tell me if it is a hardware or software problem?

    Hey Buddy,

    I m not owner of this laptop, but I think the error message says it all... The WIFI card is disabled, and you must activate it so that you can use the WLAN connection.

    As far as I know on the front of the laptop there is a switch of material for a WLAN connection. Must be on IT.
    In addition using FN + F8 key combination you can also turn off/turn on the wireless network card.

    Check this box!

  • Satellite A300-02: connection WLan keeps falling & wireless network card is disabled

    Hello..

    You just bought a new A300-02W (canada), everything works fine wxcept... wireless.
    The passing continues WiFi connection and card wifi has been disabled, I restart the computer then go through the steps of repair under Win Vista to be able to connect again.
    I went to the store and got one same one, another model and I'm having the same problem, the drivers are up-to-date, tried to Win XP and it is the same question.
    Called Toshiba tech support and they advised me to wait for the new wireless driver because the laptop I had is still new.

    Wireless card: Intel wireless wifi link 5100agn
    any idea?

    Hello

    Your laptop is a Canadian series and that's why I put t know why this WLan issue appears on your laptop, but I recommend you use and installation and driver WLan Intel page.

    In addition, you can check the portal of Toshiba Europe WLan WLan driver:
    http://APS2.toshiba-tro.de/WLAN/

    In addition you must disable the option in the properties of card WLan (Device Manager-> properties-> Advanced tab CAD WLan) for energy savings
    Also check the power management tab and turn off also the option called allow the computer to turn off the device to save energy

    Finally, and especially if a newer BIOS has been released for this series then update!

    Good bye

  • M40X-295: solved unstable connection WLAN problem

    When you use the WiFi network using the default settings on my m40x (I only put SSID and WPA password for), the connection is established (802.11.g) was often interruppted.
    for example: listening to internet radiostreams, the download has been interruppted or websites is expired.

    Solution 1: Force the m40x-adapter to use 802. 11B only.

    Solution 2: update the driver wlan Intel version 9.0.2.0 (Intel wireless_9.0.2.0_ - _generic_TIC_97904.exe). This driver is located on the Intel site.
    Now the speed of 802.11 g works (almost) well too. OK, the solution 1 is a bit more reliable.

    My configuration:
    M40X-295, WinXP Home
    Router AVM FRITZ! Box Fon WLAN 7050, (802 11 b + g), WPA-TKIP
    DSL 1 Mbit
    WiFi-force about 95%
    (1 m mobile cordless phone)

    Hi Carsten

    Thanks for this useful information.
    I think the 9.0.2 is the new version of WLan.

    Good job.

    Thank you very much

  • Satellite L450D - 11V peripheral WLAN disappeared

    My daughter has this laptop and lost features Wi - Fi during January 2010. I downloaded the latest BIOS and WLAN drivers, but the device is still missing in Device Manager. BIOS has active WLAN.

    The laptop is running Windows 7, and the device is a Realtek RTL8191SE onboard.

    I'm assuming that a windows update has disabled this as it already had no problems - works fine via ethernet cable.

    When starting laptop, the wireless light comes on but goes off then once Windows is used.

    It seems that there is a similar problem to others - I do not want to reinstall OS because I'm assuming that the updates of windows will do the same again.

    Any ideas - Toshiba problem or problem of Windows 7?

    Hi Gimster182,

    About the disappeared WLAN device, you must check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51315&TSTART=0

    So make sure that your WLAN device is activated correctly.

    Have you tried with the factory settings?

  • Satellite P300 - re-connection Bluetooth problem

    Good day to you all,.

    I bought a laptop Toshiba P300 BB with WiFi and bluetooth Windows Vista certified.
    Everything works fine with only the exception of the connection between my mobile phone (Nokia 6300) and the program "Nokia PC Suite"
    When I put the PC in 'sleep' by closing the lid of the screen, the bluetooth with the phone stop connection (it seems to be ok)
    When the PC is wake up by opening the lid of the screen, it will start, but the bluetooth between the phone and the PC (Nokia suite) connection is not recognized. Even trying to do it manually.
    To reactivate this connection automatically, the computer must be stopped and restarted re - a.

    The PC power is set to power and battery on "never stop".
    The action of closing the cover of PC screen is set to 'sleep' (French intelligence)

    What is going on? and what needs to be done to fix this problem?
    All your 'lights' on this topic will be welcome
    Thanks a lot
    JCP

    Hello

    This question must be post at Nokia. They have designed this software and before software is released, it must be tested. I assume that they test it on several different laptops and desktop computers.

    So why this third party software doesn't work on Toshiba must be answered by Nokia.
    Computer laptop manufacturers don't offer support for this software and cannot be responsible for the feature.

    In any case, for me is not the big problem. It cannot be that difficult to turn off the connection before switching in standby mode, or maybe close to Nokia PC Suite. After waking up, start the software again and it should work properly.

  • Satellite L450D-13U does not start

    Yesterday the screen on my L450D if empty, then the closed machine.

    Now it does not start at all.

    There is no light on the screen when the power cable is fixed.

    When the Start button is pressed all that happens, there is a momentary flash of light we (don't know if it's the right name) and the light of DVD.

    You can also hear the fan start but will immediately power off.

    That's all that happens.

    I tried without the battery, tried to discharge the battery.

    My laptop just died?

    Y at - it a hope or should I just go?

    Hello

    A friend of mine had the same problem but with a laptop from another manufacturer.
    The problem was faulty RAM module. The RAM module stopped working one day to another. Who knows why, however, the new module solved the problem. Replacement is very easy.

    I recommend you to check the RAM modules first.
    Otherwise if this isn't question of module, the problem could be linked to the faulty motherboard.

  • Satellite L450D-11V turn on problem - no power at all - please adviset to

    Hello all - hope someone can help with my application

    I was using my laptop 2 years normally and off last night by the usual method - start - stop. Had no problems at all with this laptop because I got it.
    No notification that batteries charged not etc.

    This morning when I went to turn it on, it could start. I noticed that there is no green light on the front panel. By pressing the on switch, nothing happens. All indications are that no power is getting to the laptop

    Removed the battery and replaced it
    Checked cable/lead/plugs/all earthquake power plug connections - all pushed in etc - etc.

    Husband has exactly the same model, so we tried switching battery - its has been completely loaded, my laptop turns on not with its battery
    Also I tried using its power cable - nothing happened.

    Don't Wan to spend a fortune on it - it would be just as simple as a fuse or something - any help appreciated!

    see you soon

    Hello

    You can start your laptop with AC only (removed battery) power?

    By the way: check it please http://aps2.toshiba-tro.de/kb0/TSD57013H000JR01.htm

  • Satellite L450D-13U won't talk to my printer

    I tried to get my laptop to print on an old HP720C without success, so I bought a new Kodak ESP5250 All in One Printer and tried the wireless, then USB2.0 options, but none of them seem to work.

    The computer loads the software very well, says that everything works and when I press print it tells me the document sent to the printer - but it never happens! On the screen of the print dialog box, it does seem to start the queue.

    The scan option works both by pressing the button of the Kodak printer as well as the option on the laptop and I already tried the service of automatic switching on the services.msc Printer Spooler.

    I also tried remove the contents of the System32\spool\printers and \drivers and reinstall the printer, but in vain.

    I have been through every method of troubleshooting on the Kodak site and been talked through by one of their agents of telephone assistance service, but nothing seems to work.

    My daughter has an Advent laptop with Windows 7 and it works very well with both old and new printers, so I presume that there is a problem with the Toshiba.

    Any ideas would be welcome because I can't keep saving files on a USB key and him asking to print for me.

    Thank you
    Caroline

    On this way, it is quite complicated to discuss these issues. What we can do on this forum is to repeat again and again standard how get the printer doesn't work but I think that you have already done all this.

    Is there no way for visit you to seek professional help and ask someone to you and check all the options?

Maybe you are looking for

  • NO SOUND, please help

    Some time ago I started having problems with my card (SigmaTel C-Major Audio sound). At first he began to distort the sound, but after reinstalling the audio driver (using Tools & Utilities CD-ROM), has been fixed for a short period of time when he s

  • How to take the measurement time of waveform.

    Hello I faked a square signal I need to measure the period of time without interruption... automatic measurement of the time for one cycle... For example, I have square wave, and I need to measure the period of time and display it without attributing

  • HP Dv6 6 c 50: laptop does not start after interruption of the upgrade of windows 10

    I was upgrading my system Windows 10 free upgrade offered by Microsoft. After completing the download of the system has been installed. When close to 50% of the installation is complete the computer turns off because the battery has been cut. "When I

  • 8E5E03FB error code display; undefined problem.

    I am a computer Tech that just repaired/recovered this system VISTA Ultimate using the MFG recovery disk.  The system repaired very well, but it will now refresh.  * THE INITIAL CAUSE of the problem was when the customer off its system while the SP-2

  • VISTA HOME BASIC transfer to another system

    I have an ACER L320 with basic windows vista family operating system. now my PC gives the problem and after many trials, technician acer has suggested me to buy a new system. I want to know that can I install my OS to new pc assembled with the same l