Software simulations and next/or buttons not working not not on Moodle/Scorm cloud

Similar Questions

• Equium A60-199: audio and video control buttons not working not

  Audio and video control buttons used to work for windows media player, but now they are not, I wondered if I had pressed or something changed by mistake, or maybe I need to take it to be fixed? Help, please.

  Hello

  AFAIK utility Toshiba controls must be preinstalled if you have correct functionality. Check this box on your device.

  Good bye

• Why don't my standby extended and stand-by buttons stop working on XP?

  After installing and uninstalling some programs do not work my sleep time and stand-by buttons. My laptop is Toshiba and I run Windows XP. Help, please!

  As I said above, your graphics driver (VGA controller) could be the issue. What is wrong with him? Is there a yellow? or! next to it in Device Manager? If so, you need to reinstall the driver. Most often, these drivers can be found on the website of the manufacturer of the computer. If you give me the full brand and model of your computer, I'll try to locate it for you.

  Click Start > run > type devmgmt.msc > click OK. Scroll down and look for all devices that have one of the above yellow marks.

• SBH20 play/pause, next, previous buttons do work (Xperia Z3)

  Hello. I bought SBH20 but play, pause, next, previous buttons do not work. Volume buttons and the button play/pause for accept/reject calls work. I use it with a connection with Xperia Z3. Can U help me what could do? Do not want to withdraw. Thank you.

  After Lollipoped my Z3, it works fine. Probably, there was something with kitkat on my phone...

• Re: Satellite T130-15F left and right mouse buttons both work as right click

  We have a Toshiba Satellite Pro T130-15F which presents a strange problem when any user logs on to the laptop and they try and use the left button of the mouse on the laptop it works like the right mouse button, if the laptop is not a left mouse button to work as a left and right work as right button.

  I tried to rebuild the laptop several times I tried also to restore the bios default settings, I would be very grateful if anyone has any ideas on this.

  Thank you

  Peter

  > When a user logs on to the laptop and they try and use the left button of the mouse on the laptop it works like the right mouse button.

  You can connect the usb mouse to check how it will act? If the usb mouse works properly, it may be malfunction of touchpad.

• Pavillion dv7 6c95dx: print software prints and SimplePass sensor does not work

  Hey there,

  I have a HP Pavilion dv7-6c95dx and prints print sensor and SimplePass software does not work.  I am unable to find the relevant drivers/etc on HP website.  Any advice would be appreciated.  The unit was bought in the USA.

  Thank you.

  Hello:

  I think that this driver since the dv7t-7000 will work as well as the security software to save your fingerprint.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103013-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117897-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

• Trial of CS5.5 previous Page and Next Page does not

  I work in CS5.5 and the Page Up and Page Down shortcut keys do not work. I have the standard EDITION seting > KEYBOARD SHORTCUTS > to go to the next Point Edit = Page Down Id. Page Up.

  Using the HOME and END keys.

  Some tips on how I can get this to work?

  Thank you.

  What predefined keyboard do you use?

  EDIT: I think I understood what the problem is. You need the target tracks in the timeline panel to get these commands to function. Click on the buttons to header - video 1, video 2, Audio 1, Audio 2, etc. - to select the tracks you want to respond to commands select Modify.

• Satellite A505-S6973 - mute and eco utility buttons not respons

  Hello again everyone,

  I apologize for this but I have a question about my account record.

  I posted a question earlier where whenever I press the mute buttons and eco utility I get no answer (just a beep the button mute).

  I pressed the fn man icon and button support and I see it says I must register the button but I have no idea where I have to browse to find the application to fix to save it.

  I hope someone can help me, I searched through the forums and the last time I posted the question to the answer that I had did not work.

  If anyone can help with this question I would appreciate it very much.

  Hello

  If you want to use the ECO button, you must also install the ECO utility.
  In General, the multimedia keys on Toshiba are controlled by VAP (value added package).

  In your case, I recommend you to reinstall this VAP.

  > I pressed the fn man icon and button support and I see it says I must register the button but I have no idea where I have to browse to find the application to fix to save it.

  Usually, you have to choose the application (exe file) that you want to use under this button

• Firefox tabs on the top and the Firefox button not there

  I've recently upgraded to Firefox 4 and am very happy with it. Today, however, some parties have disappeared! I do not see the Firefox tabs on top or the dresser orange Firefox Button. Is the new button to reload in the Awesome Bar and when I checked the version, Firefox luckily informed me that I have the last update 4.0 so not sure what is happening. Ideas for help would be appreciated as I really like the new features!

  To get the orange Firefox button, you need to hide the menu bar, do a right click on a toolbar and click on the entrance to the "Menu bar" to deselect it. You can temporarily show menus if you need by pressing Alt or F10.

  To change the position of the tabs, you can right click on a toolbar and click the entry "Tabs at the top".

• Pavilion dv6-1140ew: 1140ew button Mute and the wireless button disappeared

  My Mute button and the wireless button disappeared. They are neither orange nor blue, they are not highlighted.

  I did my Lalonde normal and regular cleaning. With the help of the manual I disasembled the phone until I could access the fan/heatsink and clean it with air preasured. After reassembling the laptop, I discovered that the two buttons are not appearing on the cover of the switch. I thought that I must have failed to plug something properly, but after checking twice, I am sure that everything is as it should be. The wireless card works perfectly, so are the speakers. The computer turns on automatically (I'm actually hit him), wifi works perfectly (well, I'm on it) scrolling volume works ok, so media buttons. But everything I try, I cannot get the Mute and buttons wireless to work once more.

  Any help would be welcome.

  PS.

  I tried the hard reset, with deactivation of all sources of power. Does not work.

  Hi @Schanez,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-1140ew Notebook and the Mute button and the wireless button not working not properly. This package contains the software that enables the quick launch on the keyboard to program buttons. Simply download and install sp46731.exe.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• Video objects in software simulations

  I recorded a software simulation, and then a video demo separately. I published the demonstration video on the spot. I tried to upload this video as a "video object" in my software simulation. When I try to playback, the "video" object is right there. Is there some magical setting I'm missing to make it work?

  
  

  Thank you in advance!

  I just thought about it: there is an 'Auto Play' box that should be checked.

  

• Slideshow button previous and next does not work, someone has the same problem?

  When I put more than two slide shows on stage, the button previous and next stop work.

  Hi Bernard! Finally, I solved the problem. I put borders (area) in the upper layer than the layers of the slide show. =/

  

  Now, works great. Thank you very much for the help!

  Home

• HPSLPSVC service does not not on my PC. Solution Center and C309g show buttons do not work

  This worked for a few days and 2 calls with technical support...  Pending their next call and thought to try the Forum.  Seen many old messages on this task using a lot of CPU, but it's 2008 and 2007.

  What WORKS:
  -printer is on the network to the address 192.168.15.254
  -I can print to it
  -I can access the printer with the browser support page and the IP address above
  -I can see the printer and print using my HP iPhone application
  -I can scan by using a shortcut on the desktop and the program HP (and paint) in the DIM folder
  -I can copy using a shortcut on the desktop and the program of HP in the DIM folder

  What does not WORK:
  -HP Solution Center does not; Gets the error saying install is not complete
  -Ditto for the launch of the digital imaging of the solution center monitor
  -Installation of network device gets an error "Task does not exist" when installing.  Also got "task not found."
  In some troubleshooting I identified this task - HPSLPSVC - such as not found NOT *.
  This seems to be an HP device/network discovery support service *.

  -The button of SCAN to PC on the C309g display says "Try startinf scan of the computer.
  -HP diagnostic Scanner (HPSDU) indicates network problem
  -HP Printer software Diasgnostic does not show the printer on the network, but it is
  clearly there that the printer does not work
  -A USB installation HANGS and eventually times out in peripheral step 'configuting '.  No other reason
  that shows timeout.  Manager tasks indicates no. e/s or CPU to the task or the service (s) after a short period.

  Among what has been done so far, because I bought the printer Thursday:
  -dozens of software installs / uninstalls with ZoneAlarm and defender completely market
  -A level 3 driver, uninstall and reinstall
  -Uninstalls the success of all the previous HP software.
  -ZoneAlarm settings to open ports and which tasks are in place, such as documented.
  I am running version 9 +. the docs to install Version 8 reference parameters.
  ZoneAlarm has been OFF during installation with the same result.

  Note:

  services.MSC does not show this task running
  I can find the HPSLPSVC32.dll task in the digital imaging bin directory.
  There is a bit of CLSID, firewall name and rule for HPSLPSVC and HPSLPSVC32 registry entries
  If this task is supposed to be running, there's nothing that appears to start, as for example the task CUE.

  Any help is appreciated.  Can this service be started manually or otherwise if it's supposed to be here?

  Found an article on the forum for a similar with XP and C4580 problem after I posted the problem.  Do you have a regsvr32 HPSLPSVC32.dll since the 'bin' directory and restarted as suggested in this announcement.

  Service now shows.

  'Install' for my printer suddenly restarted automatically, and all finished.

  Printer display the buttons work.

  Solution Center works.

  CPU seems normal.

  All right.

  Bravo added another display.

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions