Software update in the recovery Partition

Similar Questions

• Update delete the recovery partition?

  I have a computer laptop g6-2123us with windows 7. When I bought last year they offered low-cost Windows 8 and I bought but never installed. Now that the 8.1 came out I would try first to install Win 8 then let it update to 8.1. If I do this I lose the Windows 7 recovery partition? (d drive he will make a recovery Win 8 partition?) Should I just upgrade or clean install?  I remember when I first got this computer he had me do a restore, as I like 5 CD 8.1 to win is not what I wish it were, these recovery disk would allow me to put everything back the way it was? (Win 7 with the Windows 7 recovery partition?)

  Hello

  As a general rule, a clean install is preferable and there should be no problem with your laptop - a guide on performing a new installation of a drive to upgrade can be found on the following link.

  http://Lifehacker.com/5984278/how-to-do-a-clean-install-of-Windows-8-with-an-upgrade-disc

  Windows 8 drivers for your laptop are on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5273777

  Kind regards

  DP - K

• integration of updates in the recovery partition (is this possible?)

  I want to integrate windows XP sp3 (the current recovery is windows XP sp2) and a few other updates in my thinkpad R60e recovery so that the next time I'm back I can't run windows update 3 hours after

  I burned the CD/DVD recovery and even has tested them with good results

  also I would like to integrate programs in there (it's less a question if) such as Mozilla Firefox and updating old programs that are in the recovery (i.e. adobe reader 9 instead of 7)

  I realize it's a lot to ask, but it would be very useful if I could, because I may not always have the time to install these updates after recovering

  See you soon

  James

  They would interfere with the process of recovery if you installed in the partition

• Satellite Pro C660-225: shrink the recovery partition englarge C partition

  When I first came to this product, prior to the opening, I thought that all 500 GB would go to the first partition, but then I saw that the recovery partition has half the 500 GB just for recovery which is unnessecery.

  But I had no problem with it at the time and used the recovery (after the backup to a disk) for ubuntu partition, so I have a dual boot.

  But now I came to realize that the games I download are taking up more room on my C drive. The problem I have is that I can reduce my recovery partition and expand the C drive.

  Does anyone know a work around?

  You will need a 3rd party software to reduce the recovery partition and add the partition of the free space in the existing C.
  I would recommend a freeware tool called Gparted

  But before you start this making, create a recovery disc!
  This is recommended in the case where you would try to put the computer laptop configuration using this disc.

• Updating software in the recovery partition

  Is anyway to update software in the partition recovery like Skype, etc windows updates?

  It saves time like u won t have to update next time u do a system recovery.

  so please please please tell me if you know.

  Thank you.

  Hello

  Unfortunately, you can't do that - generally, any changes made to the recovery Partition may cause its failure.

  Kind regards

  DP - K

• Satellite P750 (PSAY1A) - How update the recovery partition?

  Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.

  My Toshiba Satellite P750 (PSAY1A-01Y022) the factory settings has 132 update of Windows that should be applied during the first pass. I had to run Windows update 4 times before she shows "up-to-date". Not to mention drivers Toshiba as well.

  I also want to include some applications (Microsoft Office and other software and utilities)...
  Overall, I spent 2 days just to bring it t the State I want in.
  But I can't just access the recovery Partition (of the less any of this!)

  If you look at disk management, the recovery Partition is not a Volume name and that the file system is empty. If I right click on the recovery partition... all I see is "Help" Option

  I tried to assign a drive by using Diskpart letter... but it doesn't show much.
  My guess is that it is GBT/EUFI.

  Does anyone have experience updating the recovery Partition?

  > Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.

  What do you mean by update recovery partition?
  The recovery partition should NOT be touched!

  In which case you'd change the partition, the HARD drive recovery process could not be started!

  Probably, you have not understood the meaning of such a HARD drive recovery procedure.
  It's the option provided by Toshiba and the recovery of HARD drive allows you to establish the notebook to factory settings; on the same State as at the first day of the purchase.

• updated victory 8 to 8.1, how ensure the recovery partition is the same

  I have a laptop of 15-E0116AU provided with windows 8 is installed. I've now updated to 8.1, and I was wondering if anyone can confirm that the recovery partition now some how has also upgraded to 8.1.

  the upgrade took 5 hours and I don't want to go through that again,

  I called HP support and was told that Yes, the recovery partition will recover to 8.1, BUT on microsoft.com site the page says it's not too and any OEM recovery partition will restore the original operating system [which is 8 on my system].

  If HP... which is the correct answer please.

  I already have a set of recovery discs, if HP doesn't let me do another one with 8.1 upgrade.

  John

  The HP Recovery partition will recover your computer to a factory State, including BONES and the original software.

  Please use the windows 'backup system image"utility to create an accurate picture of the Windows partition 8.1 as it is currently, on a hard drive external, USB drive or network drive. You will also need to create a disc to 'fix' Windows. If your computer develops questions or you need to replace the hard drive, all you have to do is to "restore" the image on the computer. Please see Windows 8.1 Tip: use System Image backup for instructions on creating and restoring a 'Windows - System Image backup.'

  This process is not a system recovery and is different than using the window restore or refresh or HP System Recovery.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Used the recovery partition to get rid of a virus. Can I upgrade to windows 10 now or do I have to install all the updates first?

  Used the recovery partition (windows 7) to get rid of a virus. Can I update immediately for windows 10 or do I install all the updates of Windows 7 first of all?

  You can update immediately:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Check that Windows 7 is active.

• D1G64UA: Windows 10 update fails due to no space in the recovery Partition

  Try to upgrade Windows to Windows 10 8.1 upgrade fails due to insufficient space in the recovery on the D: drive Partition

  The size of the recovery Partition is configured at installation of the HP factory and it leaves only about 3 GB, which is insufficient for the upgrade of Windows 10 start the upgrade begins by creating files in the recovery Partition.

  I don't want to remove the Windows 8.1 recovery files that already exist on the D: Partition of Recovery of the construction of the plant and in fact, I don't think that the o/s will allow me to delete these files from recovery.

  Any help in how to run the upgrade of Windows 10 is appreciated.

  Glad to see that my post has solved your problem.

  Please click "Accept as Solution" to my post so that others will see that this thread has been resolved.

  Thank you

• P850 satellite - failure with the recovery partition - boot selection failed

  Hello Hello,

  My problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :
  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language setting and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact the manufacturer administratos or your system's computer.

  Status: 0xc000000e

  Info: the boot selection failed because a required device is not accessible.

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not me, work, when I go to see the Recovery Console:
  * Startup Repair
  * System restore
  * Restore
  * Tool of Diagnoctic memory of Windows
  * Command line

  Hello Hello, my problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :

  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem: *.

  1. Insert your windows installation disc and restart your computer

  2. choose your language setting and then click "next". *

  3. click on "Repair your computer." *

  If you do not have this disk, contact the manufacturer of your system administratos or computer for assistance.*

  Status: 0xc000000e *.
  Info: the boot selection failed because a required device is inaccessible.*

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not my work.

  Recovery Console has these options:
  option 1: Startup Repair.
  Option 2: System Restore.
  Option 3: image retrieval system.
  Option 4: Windows Memory Diagnostic.
  Option 5: command prompt

• HP pavilion 15 laptop: how to create the recovery partition?

  By mistake, my little brother have formatted the recovery partition. I'm not able to refresh the PC through update & recovery option in the settings of your laptop... I have the unique language of HP Pavilion 15 notebook.windows 8.1. Please guide recreate me the partition...

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  I'm afraid that you can't create partitions of recovery if they are deleted. End users cannot do.

  If the computer is originally shipped with Windows preinstalled by HP (OEM of Windows for example), you can buy HP recovery media. They are generally cheap. You can use it to restore your computer to factory default condition. Here's how:

  > > http://support.hp.com/us-en/document/bph07143

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  And once you receive the recovery [DVD or USB pen drive] media, here's how to use it to restore default factory/Windows to a condition:

  > > http://support.hp.com/us-en/document/c03489643

  > > https://www.youtube.com/watch?v=PC3sUc3lr3E

  If the computer is originally not is not come with Windows pre-installed, but you install on your own after that, then you need to use the Windows installation media to reinstall Windows. You can get Windows installation ISOs from the Microsoft web site and then burn it to a DVD > > https://www.microsoft.com/en-us/software-download/windows8

  > > http://www.howtogeek.com/80094/how-to-burn-an-iso-image-in-windows-7/

  Please, let me know if this helps and works for you. Feel free to post for follow-up questions.

• Restore using the recovery disks on Inspiron 15 3521 supplied with Windows 8 Pro. Question on the recovery partition.

  I created by the user recovery disks.  I created them the day I got the computer and he made three of them.  My brother has deleted my recovery partition just now.  My question is, if I resumed my Inspiron 15 3521 using three recovery disks that I created, be it recreate the recovery partition in the process?   I just need an answer to this question, not responses indicating that, if I have the disks, I don't need the recovery partition, why would I want the recovery partition if I have the drive, etc.  I would like to just a simple answer to the question.  If I use the recovery discs, it will recreate the partition recovery with all the info, she was in it when I got to the computer?  Once the recovery is completed from disks, will be that recovery partition be there as the day I got the computer, so if I wanted to (I don't want to, but I'm just a question) I could still create the recovery of her discs?  Basically, the computer will be exactly as it was the day I got it home, recover partition and everything?  Or, it will restore the computer to the new plant, but not to re-create the recovery partition with everything she had in it the day I got it?

  Thanks in advance.

  Yes, it will be if you select the correct option.

  See these videos:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/4794.21-Windows-8-restoring-from-recovery-media.aspx

  Recovery of factory - "deletes all data and resets the Partitions.

  Updating of the factory - "Only restores the System Partition and keep other Partition content".

  It might be good for you to ask a Windows OS DVD 8.0/8.1 just in case the recovery media works however.

• Format HARD drive, delete the recovery partition and recover with disc

  Hello

  I have a laptop Satellite C660D-17F and want to format my HDD, remove the recovery partition and recover the preinstalled Windows 7 and other software. I don't want to keep my own data, which are all stored already, I just want to be sure I can safely restore preinstalled stuff. I have a few questions that I need help to clear up before I go ahead.

  Am I right in thinking the dvd recovery disc I made when I got to my laptop has all the software and drivers that I need on this subject, the same that would have the recovery partition? If I do another room to spare in now just to be sure only will they have the out-of-box default stuff: OS, software and drivers on any of my data?

  I found [this post | http://www.mytoshiba.com.au/support/items/faq/71] which explains the recovery process. If I select "Erase the hard drive" (so I can wipe my hard drive and delete the recovery partition too) what happens after that? It will restore the OS and the software for the backup of dvd drive? Will the process after that recreate a recovery partition (which I don't)?

  Added SIDENOTE:
  I actually prefer to be able to choose what programs preinstalled settle after that I have format, but I'm guessing that probably isn't possible and will settle for install everything and remove what I'm after. Or is there a way?

  Sorry, I know that was a long post, but I want to be sure of what will happen BEFORE I'll and spoil things! :) If you got this far, thanks for reading. :)

  Hello

  I will try to offer help. ;)
  > Am I right in thinking the dvd recovery disc I made when I got to my laptop has all the software and drivers that I need on this subject, the same that would have the recovery partition?
  Yes. Saved on recovery discs recovery image contains the operating system, all necessary drivers, specific Toshiba and utility tools and some additional software.
  > If I do another room to spare in now just to be sure only will they have the out-of-box default stuff: OS, software and drivers on any of my data?
  Preinstalled Toshiba Recovery creator make recovery disc that includes the recovery image only. It has nothing to do with your personal data.
  > I found this post that explains the process of recovery. If I select "Erase the hard drive" (so I can wipe my hard drive and delete the recovery partition too) what happens after that?
  After that, you should use recovery disks created for the recovery image installation.
  > Will the process after that recreate a recovery partition (which I don't)?
  When you use the recovery disc for your laptop recovery image installation will have factory settings which include the recovery saved on the HARD disk image. To be honest I do not understand why you do not want to have this recovery image on the HARD drive. This allows the installation of recovery using recovery of HARD drive option. But of course you can delete it later for more free space on your HARD drive. Installation image that you can always use created for recovery discs-recovery DVDs.
  > I'd really rather be able to choose what programs preinstalled settle after that I have format, but I'm guessing that probably isn't possible and will settle for install everything and remove what I don't want after
  Fix.

  Also - check http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  Good luck and if you have any other questions feel free.

• Change the drive letter for the recovery partition

  The recovery partition is, by default, the value to D: which means that if I create a data partition, it is automatically in letters f: while this is not unacceptable, it is inconvenient.  I would like to change the drive letter of the partition data on D: and set the recovery as f partition: if I do this, it will automatically disable the ability to recover?  I am running Windows 7 Professional, which is an originally installed Windows 7 Home Premium upgrade.

  Hello Richard9, if you change the Recovery D: HP restore partition to another letter, the recovery procedure would not work if you ever need.

  If you have files HP Recovery discs, you could delete this partition and recover the capacity of hard drive D: and use the set of diskettes to restore HP recovery to reintall the original software and the partitions of the hard drive, all as they were when shipped from HP.