solid works program windows install on mac pro

Similar Questions

• Stuck Installing boot camp software support on Windows 10 for Mac Pro mid-2014

  Hello world.

  I have a mac pro mid-2014.

  I installed windows 7 using boot camp and all worked fine

  But my SSD has had some problems so I took it to the shop they replaced the SSD.

  SO now I have a blank disc. I restored time machine (I deleted the windows partition when I back up)

  now, I have just a single partition being original, I started to install Windows 10 by boot camp as usual. every thing works,

  created the USB (I used a disk portable 1 TB, I bought recently), downloaded software and then prompted me to make the partition.

  subsequently handed over running and starts the installation. window has installed fine and started, the boot camp installation window pops up and I click Next.

  now, he will be always stuck to the point trying to install realtek audio.

  no progress, no error report. I had to close the installation later, may not close properly due, try force end it.

  have tried mnay times, tried windows 10 business and education. they are all stuck at the same point

  I don't see how I was wrong.

  someone at - it had the same question or idea on how I can fix this?

  Thanks a lot in advance, really frustrating one simple thing I had tried two days after work. ;(

  Please see Bootcamp 6.0 driver install interrupted .

• How can I add a previously installed windows on my mac pro installation

  Hi guys, everything becomes to collect my newly bought mac pro 3.1 (used). I'm moving PC, but how do I add my existing installation of windows on my mac? The mac pro is 3.1 and has 2 x 500 GB disks in a raid 1 TB configuration. It's just a matter of plugging my windows disk (I'm guessing No.) or is it a bit more complex than that? Any help or advice will be appreciated and hope to give back as much help as I get that I'm learning. Thank you

  You can install Windows on a Mac computer using Boot Camp Assistant or by using a Parallels, Fusion, or VirtualBox virtual machine natively. Refer to the instructions of Boot Camp located here: http://www.apple.com/support/bootcamp/. OT If using a virtual machine see the instructions located on the Parallels, Fusion or VirtualBox sites.

  In both cases you can not use a PC already existing installation of Windows. You need to reinstall Windows on your Mac.

• What is the minimum RAM to install windows 7 on mac pro?

  I know the minimum RAM required for the installation of Windows 7 Home premium 64-bit on the mac pro?

  As long as it's a Mac Pro, it already meets the requirements to run Windows 7 Home Premium. :)

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

• Windows 7 on Mac Pro of 2013?

  I know you're not supposed to, but someone out there has done this?

  The reason I ask is that the graph seems to be very unreliable Windows 10, looking at the many websites selling workstations all offer downgrade to win 10 or 8 back to 7 because it is the most stable.

  My MacBook Pro seemed to work PTC creo very well under 7, so when I got a Mac Pro to 2013 and that it could not install anything older than Windows 8.1, I decided to "upgrade" bith to 8.1.  Bad, bad decision, MacBook Pro became unable to drive the 27 "Apple display correctly even as the only display (i.e. built in screen off), super slow refresh etc.

  Upgrade to 10 and always the same questions. so I wonder about going back to 7 if I can...

  Thank you

  Stephen

  Your MP 2013 should support W7.

  Please see install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support . If you have problems with the installation of W7, thanks for posting the details of the error messages.

• switch between windows 10 & OS mac pro book

  How to switch between windows 10 & OS on mac pro book

  You install Windows using Boot Camp Assistant or using a virtual machine, Parallels, Fusion, or VirtualBox.

  If the Boot Camp Assistant served as you switch between Windows and OSX in shutdown and restart the computer while pressing the option key. When the Boot Manager appears you choose the operating system you want to start. More info here: http://www.apple.com/support/bootcamp/

  If you have installed Windows on a virtual machine, you start the virtual machine in OSX and select Windows. More info on the sites of Parallels, Fusion or VirtualBox.

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.
  

• PC2-5300 memory will work in my Early 2008 Mac Pro?

  I picked up an Early 2008 Mac Pro to replace my machine from 2006 and I was wondering if I could use my 16 GB of memory in the new machine?

  Near as I can tell, the only difference from PC2-6400 is speed.

  Thank you

  According to MacTracker database all the Early 2008 Mac Pro using PC2-6400, and you cannot use slower RAM the RAM in the computer is designed to use. Sometimes faster RAM spec can clock on an old computer but the RAM slower than the technique almost never works.

• cannot use Add and remove programs windows install not working not

  I'm trying to uninstall vzaccess Manager but I get an error cant find program that has installed the program

  Hi Norman Kelley,

  ؠ What is the exact error message that you receive the error code?

  ؠ You remember recent changes made on the computer before the show?

  ؠ What is the service pack installed?

  Try the steps listed in the link below: how to solve the problems that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651

• I have one of my programs adobe on a mac pro, which is broken. How to pass the program over this i mac?

  I have one of my Macbookpros that has a broken screen. How to pass the program Adobe of it ti that I have Mac?

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

• Image.source in ItemRenderer works in Windows but not Mac

  I have a Flex (AIR) application that gives me problems on Mac. In one of the
  DataGrids, I use an ItemRenderer with an image control. Code of the
  "set data(value:Object)" feature assigns a path as the source of the image
  define as follows.
  
  imgThumb.source = File.documentsDirectory.resolvePath("pdqtemp").nativePath +.
  "/" + data.strJPGFileName;
  
  
  This works fine in Windows but not on Mac.
  
  In this case, the path is the following on the Mac.
  
  /Users/Brian/documents/pdqtemp/artist_01t.jpg
  
  
  I checked that the file is in the right place, and when you use the path in
  the command line console, it addresses correctly this file and directory. I have
  do not normally develop Mac apps, so I do not know there is something that I am
  missing.
  
  Any ideas?
  
  Thanks for your help.

  I just hit this same problem. The fix was prefixing "file://" to the path just on Mac:

  If (Capabilities.os.search ("Mac") > = 0)
  image. Source = "file://" + path;

• Which driver to download to make it work on Windows Vista the IntelliType Pro 6.0?

  I've used my keyboard & mouse located on this computer, but then took the computer to a new location where I had another keyboard & mouse.  Am now using the computer back to this place with the original keyboard & mouse but when I try to install from the CD I get the message that there are known with Windows Vista compatibility issues.  I thought I found the correct driver but still get the error messages.  Which is the correct download?

  http://www.Microsoft.com/UK/hardware/download/download.aspx?category=MK

• I can't beyond password entry to update the adobe flash player. I tried my password apple and even used a new adobe password. Nothing works. I have a mac pro. What I do?

  See above question

  What userid & password should I install Flash Player?

• HP Laserjet 4 L in Windows 7 64 bit Pro using a PCI card

  I can't get my HP Laserjet 4 L to work under Windows 7 64 bit Pro. I installed a new parallel PCI card, device driver tells me he's working. I installed the printer driver 4L listed in Windows 7 Add a printer. Cannot print. I looked in the registry and have... amd64_prnhp002, 003 and 004 and 005 located in HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/SideBySide/winners. I have to delete all these entries in the registry? Can someone give me instructions step by step to get my printer to work? Is the device driver indicates everything works.

  File devices and printers probably associate the PCI card with your computer.  Right-click on the computer icon and look for the menu item printer properties.

  If you have Pro or Ultimate, you can use the interface written by printmanagement.msc printing team, to manage local printers.

  Alan Morris Windows printing team;

• Screen Dell 5 k with 2013 Mac Pro in El Capitan

  So, after years of waiting for Apple to make a screen that mocks use of the capabilities of the Mac Pro, I gave up and bought the Dell UP2715K 27 inch monitor UltraSharp Ultra-HD 5 K.

  It uses two cables in parallel to transmit the signal from k 5.  There's help on the Dell site and apparently it works 5 k with the Mac Pro 2013 in respect of Yosemite, but there is no mention of El Captain (why type this ridiculous name of OSX makes me so angry).

  Thus, the question, someone at - it operate under El captain to 5 K with the 2013 Mac Pro garbage.

  Thank you

  Stephen

  In

  Use screens 4 K and Ultra HD TVs with your Mac - Apple Support

  Apple says that

  Double-cable displays

  Some if poster with greater than 4K resolutions requires two DisplayPort cables to connect the screen at full resolution. V10.10.3 with OS X Yosemite or later, 5K 27-inch Dell UP2715K display is supported on the following Mac computers:

  • Mac Pro (end 2013)
  • iMac (retina 5K, 27-inch, late 2014 and later versions)
  • MacBook Pro (retina, 15 inch, mid-2015) with AMD Radeon R9 M370X