Solutions for all-in one HP ICON

Similar Questions

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Scanning continues to not work for Mac OS 10.6 and 10.7 for all-in-one printer, HP Officejet 6110

  Scanning is broken in Mac OS 10.6 or 10.7 for all-in-one printer, HP Officejet 6110. It seems that only old versions of Mac OS will scan. I realize than products account "age" but it's really - poor behavior that HP and Apple cannot support such a function based on a very popular printer.

  Information on scanning support is circular at best and misleading at worst. A Bulletin Board suggests the purchase of a third party program to do the scanning 'work' for the Mac. Terrible.

  There should be a patch for it. It is really unacceptable and tarnishes the reputation of Hewlett-Packard and Apple.

  (Forgive me if this sounds like a sales pitch, it is not intended to be, and I'm not in the sale by any means - it's just the logical thinking process, I would in your situation).

  Option 1: Get Vuescan

  Pro - you can scan... as long as the printer is working.
  Con - given that electronic devices are usually only expected to last 5 years or more, your 6110 could go at any time, hence the need to upgrade. Improved printer support the most recent OS and the need of Vuescan would go, resulting in a loss of $40.

  Option 2 - upgrade
  Pro - new product will be compatible current OS with a complete solution, have more physical features than your current product and a warranty.
  Con - it's pocket money-, but looking at the Con in Option 1, you could potentially spend AND pay $40 for additional software, so in the grand scheme of things, it would be the least expensive option and best bang for the buck.

  These are my thoughts on this subject, take them for what they are worth. Whatever you decide, I hope everything is working well for you and happy that you have found an alternative solution (always nice to have more options)

• Whe trying to update ios to ios 9.3 9.2.1 come error 3194 give me the solution for all I phone and ipads

  Whe trying to update ios to ios 9.3 9.2.1 come error 3194 give me the solution for all I phone and ipads

  Try some suggestions here: If you see error 3194, error 17, or "this device is not eligible for the requested build" in iTunes - Apple Support

• Photosmart HP 7510: How can I configure alert of low ink for All - In - One 7510.

  See the answer to this question, but I don't seem to have the software mentioned in the response. So, I guess that a second question is can I re - install if I can't find the original install disc?

  Welcome to the HP community @SallyLR,

  I understand that you're looking to reinstall the software for your HP Photosmart 7510. I'll be happy to help you.

  Here is a link to the HP site where you can download the software and drivers for the HP Photosmart 7510 e-all-in-one printer.

  Software and driver - printer e-all-in-one HP Photosmart 7510 - C311a

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• All-in-One 200-5200t: adding RAM for all-in - One 200-5200t

  Hello, currently my all-in - One 200-5200t has 4 GB of RAM, but I want to upgrade to 16 GB. What kind of RAM would need and what would be the maximum amount that I can put in the computer?

  @NinjaSponge, welcome to the forum.

  Here is the memory upgrade information for the computer:

  Upgrade memory information:

• Problem installing software for all-in-one Deskjet F4210

  Hello.

  I have a problem when you install the software for my HP Deskjet F4210 all-in-One printer.

  First of all:

  • I am running Windows Vista Home Premium x 64.
  • I tried the 3 installation methods:

  (1) installation CD.
  (2) installation of downloadable x 64 Installer.

  (3) installation of downloadable x 32 Installer.

  I get the same error message (series) at each facility.

  I also tried each method of installation mode execution "Run As Administrator". Which is not exactly change the result.

  Just to try, I tried to install it on Windows XP, and it has worked very well with no error message.

  I don't know what the problem is, but I have screenshots with legends and a comment by each (to me) that explain everything.

  * Note: You can click ON the picture to SkyDrive show in its own window.

  Images:

  1) HP Installer screenshot 1

  2) HP Installer screenshot 2

  3) HP Installer screenshot 3

  4) Setup HP 4 screenshot

  If anyone can help, please do.

  I really hope that these screenshots can be useful.

  They are in order of appearance.

  Twitter: @mgarcher007
  
  My rig: HP Pavilion a6645f Special Edition: Verde.
  CPU: AMD Athlon 64 x 2 4850e @ 2.50 GHz
  RAM: 5.00 GB DDR2 800 MHz
  HDD1: 500 GB Seagate Barracuda, 32 MB cache
  HDD2: 1.5 TB Western Digital Caviar Green, 64 MB cache
  Optics 1: HL DVD-RAM
  Perspective 2: Pioneer BD-R/DVD-RW
  Graphics card: Single EVGA GeForce GTX 260 896 MB 448 - bit GDDR3 PCIe 2.0 (Yes, the card just fits, I have only one other device PCIe [a HDMI intensity Pro capture card] and I can't even keep the side panel of the computer, because the card sticks out.) I'm working on a mod for that matter).
  PSU: Ultra x 4 850w modular; SLI and CrossFire ready
  Various: Intensity Pro (HDMI capture card) for the capture of Xbox 360 and PS3 game and making game vids/fixtures.

  Hello

  You use Internet Explorer version 8? If so, uninstall Internet Explorer version 8, and then try reinstalling sw of the printer driver. You can reinstall Internet Explorer version 8 after you have reinstalled successfully the sw of the printer driver.

  

  Kiko

• Upgrade to Windows OS 8.1 for all-in-one printer, HP Photosmart C4385 of Vista

  My old HP laptop used the Windows Vista operating system. All-in-one printer, HP Photosmart C4385 worked very well. I have a new HP computer that manages the new Windows 8 operating system and I can't load the printing software as the new operating system is incompatible with the printing software. It is certainly another available driver so I can use my all-in-one. Please let me know what the fix is far ahead, but a new printer.

  Hello

  Software for Win 8.1 can be downloaded from the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=3651156

• Looking for printer driver for all-in-one series of inkjet1200 for 64 bit Windows 7, how to solve?

  Hello

  I have a printer inkjet 1200 series all-in-one. You will need to communicate with high tower window 7 64-bit. But the original CD is not compatible with 64 bit. I tried to use the window updated but still not able to find the driver on the web. Any good suggestions? The printer is still in good condition and don't want to buy a new one yet. Thanks guys...

  Hi Catsugar,

  Follow the steps outlined in the document below to install this printer in Windows 7

  The driver for your product is included in the Windows 7 operating system

• HP Deskjet Ink Advantage 1515: stop the test page printed for all-in-one printer, HP Deskjet Ink Advantage 1515

  How can I stop my HP Deskjet Ink Advantage 1515 all-in-One printer to print a test page everytime I STARTED printing?

  Hello JoshSimon ,

  Welcome to the HP Forums.

  I see that you have a problem with the printer printing before you print a test page.

  If you turn off the printer at the end of the day, please do not.  Turn the printer on/off will result in printing a test page.  If you are concerned about the printer lost power, and that's why you stop, the unit actually built in sleep/stand mode that will kick in when you are not using the printer.

  Once a print job is sent to the printer it then wake up and do the task at hand.

  In addition, make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  See you soon,.

• you forgot the PIN efax for all-in-one x 7510

  Tell me how to get my PIN efax for my x number of all-in-one photosmart 7510? (I forgot)

  rome51

  At this point given that the PIN code is assigned by eFax, I contact them and let them know you are unable to access the PIN and you attempted to have their site send you it in an e-mail. They should be able to give this information. The phone number is 1-800-958-2983. They would be those who have to give you that PIN because this information is with them in their systems.

• VMPlayer cannot detect the scanner for all-in-one printer?

  Hello.  I am running Linux Mint 14 in VMPlayer on your desktop AMD Win7 hexagonal base.  The implementation uses a MG5320 Canon all-in-one printer on a wireless network.

  Symptom: When you try to use the scanner under Linux software, I get an error that does not scan.

  Comments: I know that the printer is connected and can print from VMPlayer.  I used the scan software successfully in a Win7 laptop boots double in Linux Mint 14.  Therefore, the only difference is running Linux Mint in VMPlayer.

  How can I get the functionality of the scanner of my all-in-one printer with VMPlayer?

  TNX in advance for all advice.

  The 'virtual' printer in the virtual machine settings through the present printers on the host - there should be no impact on your ability to 'normally' adding printers inside the guest.

  Unfortunately, I'm not familiar with the same type of printer, and I'm not Linux.

  The thing is useful that maybe I can tell you, is that you may need to configure the virtual adapter as connected by a bridge instead of the default NAT.

• Prot for all-in-one M1213nf

  I use a printer on my network that is connected to a router.

  I need to transfer the port to the printer so that I can access via the wan port.

  for this, I just need to know the port number of this perticular (Professional M1213nf MFP) printer if it is available

  * By clicking on the laurels! White Star is a great way to say thank you on any post that you helped or solved the problem.* *.
  * By selecting 'Accept as Solution' for an answer that solves your problem helps others who are searching the Web for an answer *.

  The list of ports used by printers HP printer:

  UDP - 137, 138, 161, 427
  TCP - 137, 139, 427, 9100, 9220, 9290, 9500

  Let me know if you need more info.

• Printing for all-in-one 7510 Manager Office

  I own a HP Photosmart 7510

  System - Windows Vista 64-bit

  Connected - wireless

  Set up on eprint

  I was able to use a desktop computer "dashboard" to scan, print, e-mail, etc... He disappeared and I can't find anywhere to install again.

  Change - all of a sudden I couldn't print.

  (1) computer printer recognized

  (2) recognized computer printer

  (3) but when you went into properties and attempted to "print a test page" it came with an error

  (4) HP support has helped me get the printer to print by restarting the coil

  But now my HP 7510 Essentials 'Manager' disappeared and whenever I click the icon it asks me to connect to a printer, but he is already connected and prints.

  All I want is the Manager back

  I found this to be a very useful tool and I love him back. Help please

  Thanks for the clarification,

  The HP Photosmart Essencial isn't part of the 7510 software, it is part of the software provided for older HP printers.

  In order to solve the problem completely uninstall the software by clicking Start > all programs > HP > Photosmart HP 7510 and follow the uninstall option.

  Then go to control Panl > programs and features > uninstall a program and remove reminders of the software (HP Customer Participation, Readi Iris OCR, etc.).

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108855-3&cc=us&DLC=en&LC=en&OS=4062&product=5070121&sw_lang=

  Then look for any change when access to the printing software.

  Please let me know if this is useful,

  Shlomi

• HP photosmart all-in-one 24480: cord for all in one printer-scanner

  When I moved recently, I have lost the cord that connects my scanner to the computer tower. I can't understand the type of cord, it must be. Obviously an end must be a male USB connection but I don't know what is the other end. The scanner is equipped with a female port which is flat on the bottom with beveled on the top corners and there a piece of rectangluar in the middle of the port. Please help if you have one of these printers or you know what I'm trying to describe. Thank you!!

  Hello

  You will need a USB 2.0 cable standard for a printer.

  Such an appearance as follows:

  

  Kind regards

  Shlomi