Problem installing software for all-in-one Deskjet F4210

Similar Questions

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• HP Officejet 7400 series: installing software HP all-in-one cancels before the end

  After the upgrade to Windows 10, my HP OfficeJet 7400 (wireless) series has lost the ability to analyze.  The HP Solution Center responds with the message "cannot run because your installation of the device is not complete.  I ran printing HP and doctor Scan and it said that "the complete office solution for your product is not installed on this computer" (even though it worked fine w/Windows 7 before the upgrade).  Continuing through the stages of printing and doctor Scan, you are prompted to install the software all-in-one series I initiative.  He gets successfully to the menu of Options of Installation of revision.  I check out the review and accept the check box and click Next.  At this point, it passes to the "prepare the system for the installation" and for the briefest of moments he says software removal.  But then the operation will stop and the program ends without having to install the software and drivers.  I found a log file pushing files and shows that I am an ERROR_INSTALL_USEREXIT 1602 - the user cancels the installation.

  Although my situation seems to be a bit different that other issues addressed in the forums of HP, I've tried every fix suggested in those and nothing works.   I also downloaded Windows Scan and scan HP and Capture and cannot find my scanner.  The print function, however, works with the supplied Windows 10 driver.

  Any thoughts?  Thank you!

  Hello @Bill_M1,

  This is a great place to visit for a community support and HP! I see that you are not able to scan and you encounter problems during installation. Thank you for providing all of the steps that you have already tried. I wish I could help you.

  I would uninstall the old printer drivers Windows 7 install and reinstall the most recent drivers.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.

  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  Here is the driver: Full_Webpack - 140.0.408 - 5-AIO_CDB_FSW_Full_Win_WW_140_408 - 5.exe

  How is the printer connected?

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• Problem installing drivers, F4180 all in one

  I'm having a really hard time getting my printer to work on a new computer.  Printer previously worked well on a laptop with Windows XP Home Edition, but now I'm trying to install it on a newer desktop with Windows 7 x 64 Home Premium.  After a few failed installations I can't printer to print on computers.

  I have uninstalled/installed several times without success.  A common problem I see is during USB connect installation, Windows can't find the driver for 'Deskjet 4100 Series' in software driver installation window.  See screenshot:

  

  I tried all the toubleshooting to help install on the web site, including the uninstall/install using the Setup Wizard download and microsoft fixit downloads for printer, configure and install/uninstall.  None have been able to install properly.  The wizard has detected my printer, but the installation always fails to connect to the step on the screenshot above.

  I note also, I was able to scan documents on Windows 7 without problem, but there is no printing functionality at all.

  Help, please!

  EDIT 6:30 PM IS

  Here is a screenshot of the errorlog for one of my essays in case it helps.

  

  I tried a different (and shorter) USB cable with no luck.

  I did a Windows 7 upgrade install on my Windows 7 PC and installing the printer software has worked on the first try;  a pilot who has not been tried installed without a problem.  I guess that some windows file has been corrupted.

  Thank you.

• Problem installing software for a purchased HP2544 today

  Hi all

  I tried to install the software using the CD but I get a blue screen and memory dump came?

  I went to the HP website and downloaded the latest software and drivers for it, 64 - bit Windows 7, but I still get the same error during installation.

  I tried to install this several times tonight.

  Someone at - it ideas?

  Have never had this problem before installing any software in the past.

  Thank you very much

  Rob.

  Hello Robflyer3,

  Welcome to the HP Forums!

  I understand when you are installing the software from the CD or the HP website you receive an image screen blue/memory. I will do my best to help you!

  You connect to this printer wireless or USB?

  I need to know at what time the blue screen occurs during installation? Did you see an error message when this blue screen? If so, please send the code of error on this post.

  I would recommend a running System File Checker by following this Microsoft document here. This utility under Windows that allows users to find corruptions in Windows system files and restore the damaged files.

  I will seek forward at the hearing on your part have a good night!

• The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

  The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

  Hello

  Please visit the following link:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

  Kind regards.

• Problems to install my printer all in one HP PSC 1350 to Yosemite mac 10.10.2

  I can't seem to install my printer all in one HP PSC 1350 Yosemite 10.10.2 Mac

  Choose my printer in the window 'Add' and 'Add' is disabled, and I get a message saying something like "there is not any software avaible for this printer." "Get in touch with the manufacturer of. But I can see this list,

  http://support.HP.com/us-en/document/c04473034

  so, I know it's true, the software he's somewhere.

  Help please.

  Thank you very much

  Hi @Nattaka

  I can help you use your PSC 1350 with your Mac running Yosemite.

  Please first reboot the Mac and printer, then download and install the HP printer drivers.

  You can now go ahead and add the printer. Please let me know if that fixes the problem, thanks.

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• All-in-one DeskJet 4625 and printing with Mac OS 10.9 Maverick

  I just installed Maverick - Mac OS 10.9 - and print is no longer a device all-in-one DeskJet 4625.  The computer and the device are communicate since I can see the ink levels, scanner and other functions, but it will not be printed.  I know that there is no problem with the printer, since I can print to it from another computer that has installed Mac OS 10.8.  Apparently, there is a need for an update of the printer driver.  Apple support is not an updated driver.  So, my question is hp will provide an updated driver?  And when?

  Hello

  Apple provide a updated driver.

  First restart your Mac, then click on the Apple icon and select software update, do not forget to install any available HP or Apple updates.

  If you can't print, try installing the package from the link below and check if this is useful, although it does not list the Mavericks, it should work on the operating system as well:

  http://support.Apple.com/kb/dl907

  Shlomi

• All-in-one Deskjet F3335 allows to print "black only" on the profile of a user, no other

  Hello

  I have an annoying problem with my all-in-one Deskjet F3335.  I print a lot of documents on my printer.  Rarely do I need to print anything in color.

  Since the acquisition of a computer running Windows 7 (x 64), I was not able to print in "grayscale: black cartridge only" on my profile; the only option is 'high quality '. (see image below)  I thought it was a systemic problem until printining something user profile on my husband.  His profile will allow for me to select "black cartridge only."
  

  I tried to uninstall and reinstall the software and updates. This did not help.

  Hoping someone out there might have a suggestion for me on how to solve this problem (and stop wasting my color ink)! Thank you

  As I understand it, you can change the printer to print in only black and white on a profile, but not on the other on the same computer. Is this correct?

  This type of question usually depends on the permissions available on each profile. I would hazard a guess that your husband is a Director or that there privleges more than your own profile. I check to make sure that your account is set up as an administrator first.

  Secondly, I would also check the 'Advanced' tab, that sometimes you can change the settings for printing color black and white or grayscale.

  Let me know!

• HP All In One Deskjet 3520 Microsoft Report Errorr

  HP All In One Deskjet 3520 error - I have Windows XP and every time I try to print (if, since an application, Internet or serigraphy, I get: XXX program has encountered a problem and needs to close - sorry for the inconvenience.) Send the report. I uninstalled and re-installed the printer twice - what happens?

  Hello

  Please perform the below mentioned steps that should solve the problem.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• Cannot install HPOfficejet 5610xi all-in-one

  Cannot install HPOfficejet 5610xi all-in-one in laptop HP Pavilion dv 9000 Windows XP Media Center Edition

  With HP disc and using the "HP Solutions for install errors" file, I receive after completing the installation of the software,

  unknown error message "Printer driver" of the Setup Wizard, when you connect the USB printer.

  The printer installed OK on an old HP Compaq Presario computer

  Thank you for suggesting to try to add printer, and it was not necessary to choose a driver from the disk (in fact I knew not which to choose), Plug and Play has worked. He has contributed to the computer to see the printer and use it.

  But to fully install HPOfficejet software 5610ix it is essential to remove all previous printers from printers and faxes in Control Panel and drivers associated property of server, in the file (is not that easy, but it worked after restart of successive). The problem is solved now, thenk you once again

• HP Deskjet all-in - One 1051 registers as an all-in-one Deskjet 1050

  Recently bought a HP all-in-one Deskjet 1051.  After you have installed on the computer, he enrolled as a series of J410 Deskjet 1050 all-in-One.  I was wondering why.

  The numeric designation may vary according to the regional location or the retailer where the product was purchased. It can also link in how the product as the default value of different media formats, for example in North America with paper letter against Europe with A4 size. What it boils down to is that your printer is a Deskjet 1050 printer specific specialized series for a retailer or the country.

• All-in-one Deskjet 3632: Deskjet 3632 black ink not working not

  Hello

  I bought a HP all-in-one Deskjet 3632 and have set up on my laptop and phone. I scan a document was nice and feel it was ok, but the documents will not print using black ink. The first impression is rather a gray, and it seems that the color ink is the only one used. When you print word documents, none of the black ink is printing and only a small amount printed on the first page of test, where none of the letters are readable at all. The cartridges are new and in the same area as the printer. I did the fixes suggested without result, bar to buy a new cartridge which I hesitate to do what the budget is tight. Is there a fix that can be made, or will I have to resort to buying a new cartridge?

  Greetings @JamesMontgomery,

  Thank you access the Forums from HP Support for extra support! I see that you have problems printing in black. I will do my best to help you with this problem.

  I wasn't sure of what you have already tried. I would say the contacts of the cartridge cleaning manually, if you have not already: ink cartridge errors. Do not take into account the title.

  If you still have questions, please contact HP support: phone help worldwide.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• All-in-one Deskjet 4535: Deskjet 4535 AIO - Scanner function not supported in Linux Mint 17.3?

  I just bought the all-in-one Deskjet 4535. As I could not set up in Linux Mint 17.3 using hplip 3.15.2 and hplip-gui (it wouldn't appear in the peripheral installation dialog box), I used the utility printers (system-config-printer) and configured through CUTS. Even then, I was forced to use the driver 4510, as a driver of 4530 series does not seem to exist.
  After having done that, I can print it, but I can't use the "Simple Scan" scanner or any other utility to scan.
  I also tried to detect the network with xsane Analyzer, but it would not detect it.

  The only way to use the scanner is via the web interface, the all-in-one offers fortunately.

  Is there something else to try? The 4535 is supported under Linux or am I out of luck?

  Well, I went to hplip.sourceforge.net and I should have started with it in the first place. I solved the "problem" in downloading and installing the latest version of hplip that supports the 4535 entirely. The repo of Linux Mint has an outdated version of hplip and 4535 needs at least version 3.5.11 to work properly. Use the latest version fixed it immediately.