[SOLVED] A cell

Similar Questions

• 7510 HP wireless installation failure

  Recently updated to the HP 7510.  Installed successfully as a USB printer and then successfully updated wireless.  The driver would still asleep the next day morning, restart would solve temporarily cela, but not as a long-term solution.  I ran several of the available diagnostic tools (HP Print Scan Doctor and troubleshooting guide).  All said that everything was Ok for printing (scan - driver problem), until he tried printing that does not test.

  The printer can see the internet through the router and I can 'ping' IP address of the printer from the computer successfully.  So I believe that the road to be good.

  I used the uninstall script to unload everything and re - install and now it will not be installed.  I can plug in the USB cable and download the driver loaded, but the normal installation process does not even see the USB cable more.  When I try to convert USB-> wireless, it detects the printer and starts the installation process, but fails with "Network Installation fails.

  HP support by phone was completely without help.

  Anyone have any suggestions.

  THX,

  -dr

  Hi dmreece,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-100195-1&CC=US&DLC=en&LC=en&os=4063&Product=5070121&sw_lang=

• What is the difference between associative arrays and nested tables?

  Hello
  What is the difference between associative arrays and nested tables?
  
  nested tables cannot be indexed by other than pls_integer and unlike nested tables table associative cananot be declared at the schema level.
  
  is there any other difference set apart from the diff above 2?

  user13710379 wrote:
  What is the difference between associative arrays and nested tables?

  Name-value pairs (associative) against a list of values (table standard/nested table).

  nested tables cannot be indexed by other than pls_integer

  They are not "indexed" the way in which an associative array is indexed. A standard table is referenced by the position of the cell in the table. This position is essentially the offset of the memory of the cell from the start address of the table.

  Can not solve a cell in an associative array directly via a memory offset index. You place a cell reference value it by his 'name' (a search in the linked list/hash table).

  The following example shows the difference between the pairs of name / value and a list of core values.

  SQL> declare
    2          --// associative arrays are NAME-VALUE pairs
    3          type TArr1 is table of varchar2(10) index by pls_integer;
    4          type TArr2 is table of varchar2(10) index by varchar2(10);
    5
    6          arr1    TArr1;
    7          arr2    TArr2;
    8  begin
    9          arr1(100) := '1st entry';
   10          arr1(1) := '2nd entry';
   11          arr1(5) := '3rd entry';
   12
   13          arr2('john') := 'New York';
   14          arr2('jane') := 'Paris';
   15          arr2('jack') := 'London';
   16
   17  end;
   18  /
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL>
  SQL> declare
    2          --// standard arrays are lists
    3          type TArr3 is table of varchar2(10);
    4          type TArr4 is table of number;
    5
    6          arr3    TArr3;
    7          arr4    TArr4;
    8  begin
    9          arr3 := new TArr3( '1st entry', '2nd entry', '3rd entry' );
   10
   11          arr4 := new TArr4( 100, 1, 5 );
   12  end;
   13  /
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

• The ip address of my router cannot be obtained by my cell phone, but he can get other computers. How can I solve the problem?

  Here is the ipconfig/all command information.

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: owner-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  WirelessLAN adapter Wireless Network Connection:

  The connection-specific DNS suffix. :
  ... Description: Intel(r) WiFi Link 5100 AGN
  Physical address.... : 00-1E-65-05-FA-DC
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e582:a22f:fef5:c1af % 11 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.193.175 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Local of EthernetAdapter network connection:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8102/8103 PCI-E FE Family NETWORK map
  Physical address.... : 00-23-5A-0D-E6-2A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {D57EF487-9E9D-4432-A3F6-09941DBAC
  B 9, 7}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 13:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {82CD5F3A-4FE2 - 41 D 2 - 9313-09635 C 287
  3A 1}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  

  0

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• can not get the wifi on computer laptop/disorder also contact to the hotspot of my cell, what can I do to solve the problem?

  If seems to run on a web server, but not both simultaneously, or is it one or the other?

  Internet Explorer
  Google chrome
  He who works with the best pf results get a connection
  or can you recommend another browser, that I can use?

  Should not be a problem of the browser but the availability of the WI - FI connection and the ability of your radio (built-in to your computer) you connect to the wireless connection.

  First, try the deactivation and activation then your network card.

  1. remove the LAN cable

  2. restart and let the WiFi to work or can't find anything... See more

  3. connect the LAN cable. From this moment (until the next time you reboot), no "Unidentified Networt" (two competing networks) and Internet access.

  To fix your problem, try the following methods one by one.

  Method 1: update the network driver.

  Steps to update of network driver:

  1. click on the Start button.
  2. in the search box type devmgmt.msc, and then press ENTER.
  3. Select the network card device and right click on it
  4. now, select Properties.
  5. in the Properties window, on the driver tab, click Update driver.
  6. After installing the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 2: Try resetting the TCP/IP stack.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .

  If the same problem still persists, then try the next method.

  Method 3: Here, you need the problems using the network troubleshooter in Windows 7 and check for the issue to this follow the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

• "No cell coverage" not listed in the use of the battery

  During the audit of the use of the battery parameters, on an iPad 2 Air, WiFi and cellular, upgrade 10.0.2, 'No cell coverage' is listed and uses a lot of battery percentage. This never happened since the purchase of the iPad two years ago. I've recently updated to iOS 10.0.2 and T-Mobile as the cellular carrier. This occurs when the two Wi - Fi AND cellular data are turned off. I barely use the cell service as it is, first of all just use wifi, and I never leave the cellular data connection on when you do not. I noticed a few days ago a T-Mobile "Carrier Update" has been pushed to the iPad. Someone else with the same situation?

  Hi there, stumped127! Thank you for using communities of support from Apple!

  Use of your iPad 2 Air indicates that it is looking for service even if you have data Wi - Fi and cell phone turned off after update to iOS 10.0.2. Given that mobile data is off, it shouldn't have an impact on the battery and I will be happy to help you with this. Be sure to test after each numbered step.

  How to back up your iPhone, iPad and iPod touch --before troubleshooting a device, I always recommend a fresh backup. It is preferable "to have" one to the 'need' to a backup.

  1. forcing a nearby app on your iPhone, iPad or iPod touch - first, quit all running applications, and then restart your iPhone, iPad or iPod touch - never underestimate the power of a good restart.

  2. reset the iPad settings - do not forget to write your networks, Wi-Fi/passwords before you start. On your iPad, go to settings > general > reset > reset all settings. This step returns your iPad to factory default settings. Test and if that solves the problem, use your backup to restore your settings.

  Take care!

• I added just Firefox/Andriod to my cell. I don't see the 3 points...

  I looked through the database. None seems to come the point I need to the right. I added Firefox Android mobile to my cell. It works but when I click on FAVORITES, it's going to...

  FIREFOX ON YOUR BROWSER
  CUSTOMIZE FIREFOX ADD-ONS
  FIREFOX MARKET
  SUPPORT FOR FIREFOX

  I know that on my Tablet Xoom Firefox has the update by synchronizing bookmarks. And there are 3 vertical points for the parameters. On this phone, I see not the 3 vertical dotted lines for the parameters. But no matter who. I assume the above 4 lines are bookmarks already there. But this is not synchronization of bookmarks I have on my other browsers? Any help would be appreciated. Are boy we not all the hungry for help. I'm trying to solve myself, but with something new, it is best to ask. I'ave never had an Android phone. Thank you very much!

  Jack:-------"

  Philipp said

  OK thanks, I think that the key square at the bottom right can be a dedicated menu key alcatel pixi devices

  Very well! And I think that the bookmarks were synchronized in the last hour after I put it down in frustration. I guess that I expected them too fast? On other devices, it's pretty fast. However, both are supported, and thank you for the time. I used the this WAS USEFUL! Any other place I can credit you let me know. ": - Dx.

• DLed new Firefox for mobile phone. New version. Not even Google site appears. Just empty. All empty Web sites. How to solve?

  I downloaded the version of todays Firefox for cell phone. After installation, I tried to test with Google site search. I see in the address bar, but the whole page is empty. How to solve?
  Samsung S 4

  Hi Mcarter

  1. What version of Firefox are you using? Firefox 37.0.1 for Android?
  2. What version of the Android operating system is on your S4. Lollipop 4.4? Jellybean 4.1 to 4.4? Lollipop 5?
  3. You wrote "I see in the address bar, but the whole page is empty.". Could you please post a screenshot
  4. Finally please tell us what you were doing, this happenedd, and what you expected (because you go to google.com and enter something to search or you did something else? details please!)

  See you soon!
  ... Roland

• Use of data high IP6 cell mode

  After I update my mobile recent iOS 9.3.2. my mobile is consumption * a lot of data and I cut 1. WiFi help 2. background app refresh 3. icloud drive to off.i lost 1 GB of data in 2 days.it would be great if someone can help me to solve this problem.

  When you go into settings > cell phone and scroll down, you will see a list of apps. Under the name of applications will be the amount of cell data used since you last reset statistics. While you're at it, turn off the cell data for the apps you don't want to use it. If you go all the way down, you will see the System Services. Tap which kind to see what installed apps use data.

• iMessage is not using cells. None

  Hi, I was wondering if anyone else has this problem, I have an iphone 6 64 GB iOS 9.3.2,and on MTN (South Africa)... my imessage refuses to activate (send email and no cell no.), tried the wifi thing, restore, restart several times, nothing seems to work... it's not imessages to my cell. appear on my macbook and iwatch, but not on my phone, so it's a little just not where it matters most, not entirely sure how to solve this online support said I need to contact my ISP, but apparently they have no provisions to help about this... So Apple is direct me to MTN, and MTN directing me to the apple support... honestly, waited more than two service providers.

  Please can someone help.

  Thank you

  You did that, on each device, only a unique e-mail address is selected in settings/Messages/send / receive?

  On your phone only the phone number must be checked, no other e-mail address.

  Some other devices, no phone number is TICKING on the Mac and watch.

  Check this article as well:

  If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support

• How do to add the first cell not empty in a row - with results in the order reverses

  A few months ago Wayne Contello solved my initial question about how to add the first non-empty cell (text) in a row where I am inputing several phone numbers and email address.

  The link is below-

  Re: How to add the first non-empty cell (text) in a row

  What I'm looking for now is for the results in the "I - K" columns (each title, "First", "Second", third"in the table) to be in reverse order.

  In other words, I want results in the column 'Third' (K) to appear in the first column (I), "Second" can stay second and the column 'First' (I) be listed as the last column (K).

  I don't want to change the order of the phone 1, 2, 3 and send columns (A, B, C and D respectively) if possible.

  Any help would be appreciated.

  Thank you!

  is to add more than three columns and see the original formulas that I posted in the other direction... like this:

  

  L2 = K2

  M2 = J2

  N2 = I2

  Select L2 thru N2, copy

  Select the L2 cells at the end of the N column, paste

  now to hide columns I thru K selecting the three column, then using the menu shortcut for columns:

  

• Can not backup iPhone 5 or connect to cell phone applications

  I've just updated to 9.3.1 9.2, thinking that Apple had solved all the problems reported with 9.3.  However, now my phone is not connecting to cellular telephone applications, siri does not work, and the phone will not save.  It works fine when connected to wifi, but once I leave the House, none of my apps won't work (letters of google maps, Facebook, apple, anything that requires cell, that's all!)  I made all the simple fixes that I have known and that you can find on the internet: restart button apple button and power off to restart, turn off cell phone and turn it back on, turn off wifi and turn it back on, reset the network, iCloud is disconnected settings and reconnect, deleted all my photos/reset the backup settings so there is a lot of storage on my cloud , is found on my head, turned left, and none of it worked.  I'm ready to reset all but without a backup, I'm afraid to lose all my contacts.  Anyway around this?

  Does anyone else have this problem?  Suggestions and help that I have already mentioned above is welcome.  Thank you. Unhappy in Portland and the thought of Samsung is in my future.

  Backup to iCloud only works in Wi - Fi, you can not use a cellular network connection to backup your phone to iCloud.

  If the iCloud backup does not work, back up your phone to your computer using iTunes and set it back to factory settings, and then restore from that backup.

  On safeguards in iCloud and iTunes

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Restrictions put in place in settings/general/Restrictions?

• HP ENVY laptop - 15-ae101nx: when I put my cell phone battary trolling the games what should I do?

  When I put my cell phone battary trolling the games what should I do?

  Games run perfect when I put plugged in, but when I play on games battary became late?

  Help me.

  Hello @XxHamodyGamerX,

  Thank you for visiting the HP Forums!  You have come to the right place to ask questions, find solutions and get help from others in the community!

  I read your post on game performance below of your DESIRE for computer laptop-15-ae101nx then on the battery and wanted soft hand for you.

  This document should take you in making adjustments to the different systems of power supply on the system. Battery power, it is probably defined by default on energy saving , which will reduce the performance of the system in order to save energy and extend the time between charges.

  Microsoft also has very detailed information here on different powers available plans.

  Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Thank you.

• Solved problem on Satellite P30 Pro overheating

  Wow! I opened my computer laptop, cleaned the heatsink and fans 1/2 ton (exaggeration!) plushies de-dusted etc. have the rest of the components, including motherboard, put together and Voila, which was a cell phone 'dead' according to the Rémy, pulled up and works perfectly!

  I thought that just cleaning the vents etc. would solve overheating but as she has previously wouldn t turn on and then didn't have much hope, but as my son says that his policy is that if you take em to bits and reassemble then chances are they have miraculously working again! I can t his thought however "non-technical" fault it may seem!

  I hope that the other gives hope!

  Hi Steve

  Thanks for the good news. I read some comments here in the forum on the problems of overheating and especially dust and debris inside the laptop and fans was responsible for the problems.
  However, thanks for the comments and I'm sure it could be useful for other users.

• No service, submenu cell does not start every time

  Hello

  I use my IPhone 5S for a long time, but a week ago something happened and now I can't use my phone because it says 'no service '.

  I tried to enter the submenu of the 'Cell' settings, but whenever I try to click on 'Cellular' he kicks me settings. As an application that has a problem and does not work. Re - download will fix most of the applications, but I don't know what to do about this "cell". I checked common failures when the phone says 'No. Service' that's why I chose to open a topic to discuss if I can fix or repair.

  Is this a common problem? Are there measures to solve this problem? I took my phone to a local store to see if the phone is repairable, he said he has never seen a problem, something like this before. I'll go to the Apple Store as soon as possible, but in the meantime, I would like to find if there is any solution out there that I could try.

  Thank you!

  Restore iOS on your phone using iTunes.

  If this resolves the problem, you have a hardware failure.