[SOLVED] Administrator - lost privileges with records (Win7)

Similar Questions

• [SOLVED] I lost my passwords recorded after the change of equipment

  I had to change my card motherboard and CPU, the other day and immediately after this incident, I seem to have lost all my passwords. The reason I'm sure this is because the only saved password comes from a site I only used after this incident. The only thing I had done recently, except for hardware change has updated firefox to 35.02.

  Even after restoring my signons3.txt to a version 4 months, not a single difference was made. Password Manager still has only a unique user name and password, rather than the many I had before. Other than the change of equipment, the boot partition and the players are the same, and nothing has been uninstalled. In addition, I don't know if it's related, but my logins.json file is 1 KB, while the logins.json.corrupt is 109KB. The passwords were saved in there? That I should give a try?

  EDIT: Solved with a post by Chris http://codeverge.com/mozilla.support.firefox/saved-passwords-disappeared-on-update/2006894
  I don't know how to close this ticket, so feel free to

  That line. Solved with a post of someone else mentioned in the http://codeverge.com/mozilla.support.firefox/saved-passwords-disappeared-on-update/2006894

  "You can force Firefox to re - import your old passwords." Here's how:
  1. in the address bar, type "subject: config ' (without the quotes) and
  Press < enter >.
  2. click on [I'll be careful, I promise!]
  3. search for the preference: signon.importedFromSqlite
  4. right click on signon.importedFromSqlite and select "Reset".
  5. go to help-> Troubleshooting_Information, then click on [open
  Folder]. Which will open Windows Explorer in your Firefox profile.
  6. close Firefox
  7. in your profile folder, delete the file "logins.json". »

  Thanks Chris!

• Mashita dvd - ram uj-820 s is with record burning now! or windows

  Laptop Toshiba equium a160-155 came with record now!  Base

  Hi Phillund,

  ·         What is the exact error message that you receive?

  ·         Since when are you facing this problem?

  There are few users who had the similar problem and solved it, you can check out the link below and check if that helps.

  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=50720

  If this does not resolve the issue, I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I lost the sound recorder. The program has disappeared. How can I get that back?

  I lost the sound recorder. The program has disappeared. How can I get that back?

  Hi dstaub53,

  In "gone", I assume that you do not see the menu of all the Programs.Accessories? Try clicking on the Start button and typing sound (or tape recorder) in the search box. The sound recorder.exe file should then appear at the top of the search list.

  Click or double-click the exe of tape recorder to open the sound recorder. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• I can't call anyone on Skype, he said only: "problem with recording device" help?

  Could someone help me? my lack of Skype let me call anyone, when I try to call or answer a call it comes a message saying "problem with recording device"-does anyone know how to fix this help please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=no&cc=no&DLC=no&sw_lang=&product=7264...

  You can install this "driver - Lyd" (Realtek High-definition-lyddriver (HD))

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135685-1&CC=no&DLC=no&LC=No... =

• I put my cRIO 'DHCP' to 'local connection' and lost contact with her.

  I put my cRIO 'DHCP' to 'local connection' and lost contact with her.

  I changed the location setting labelled '2' to post a link-local only, so I think I hit save to '3 '.  So, I have had no contact with my cRIO network.

  I tried;

  Hit the reset button

  A MAX of opening closure

  Go to safe mode

  Lift the switch to reset IP

  Power cycling the cRIO

  Directly from the host to my target of cat 5 cable running

  None of it worked, and I have no contact with my cRIO.

  

  This is what MAX looks like now.  How can I fix?

  

  It turns out that I had more of a problem.  Corrupt drivers, 255 in many in my subnet mask, overly complex LAN, use server control... you get the idea.  So I just deleted all software, disassembled everything and more from scratch.  Now back to the top and work.

  Thanks for the tips everyone, all the pieces and peace where it is useful to help me see the bigger picture.

• for windows update make me number error msg: 0 x 80240036 and solve this problem poblem with fixit get msg w xp sp3 rendered and nework Framework 2 or lator should be installed pls can help you

  for windows update make me number error msg: 0 x 80240036 and solve this problem poblem with fixit get msg w xp sp3 rendered and nework Framework 2 or lator should be installed pls can help you

  See your other thread the same. http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/to-make-Windows-Update-am-getting-MSG-error-number/3f579859-ecb0-408D-9db3-804044a21fb7

• printer lost conection with laptop

  computer HP laptop with windows7 lost conection with 8600 pro hp office jet all-in-one. works for awhile then stops. the advice printer unable to communicate. Unplug the printer from pwr.source 30 seconds reconnect printer works & then work communicate after 30 min.

  You will need to access the router to see if it is connected.  Call Verizon to help with this.  I suggest you try the settings a static IP address in the printer outside the range of the DHCP of the router to see if it works.

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• How to solve error 2147024891 associated with my wndows 7 ultimate

  How to solve error 2147024891 associated with my wndows 7 ultimate
  and abuse of BITS cannot be started

  Hello

  
  Question: Error 2147024891
  1. Once you get the error code?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Problem: could not start BITS service
  1. do you get an error message when you start the BITS service?
  2. the problem persists with a particular service?
  Reply with answers to help you in a better way.
  
  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.
  http://support.Microsoft.com/kb/555375

• XMLTYPE with record type

  Hi friends,

  Is it possible to use XMLTYPE with record types?

  For example, in the following code I expect output voltage

  < TY_EMP > < > 1001 EMPNO < / EMPNO > < ADAMS ENAME > < / ENAME > < SAL > 5000 < / SAL > < TASK MANAGER > < / JOB > < / TY_EMP >

  The code is...

  DECLARE

  Ty_emp RECORD TYPE IS

  (

  EmpNo INTEGER

  , ename VARCHAR2 (100)

  NUMBER of sal

  , VARCHAR2 (100) employment

  );

  r_emp ty_emp;

  BEGIN

  r_emp.EmpNo: = 1001;

  r_emp. Ename: = "Adams";

  r_emp. SAL: = 5000;

  r_emp.job: = "MANAGER";

  -This line gives the error.

  dbms_output.put_line (XmlType (r_emp). GETSTRINGVAL()); -Here, I don't want to talk about all the fields in the record. I just need to specify the name of the record.

  END;

  p.s. to use object types to generate XML data...

  SQL > ed
  A written file afiedt.buf

  1 TYPE to CREATE or REPLACE ty_emp () AS OBJECT
  2 empno INTEGER
  3, ename VARCHAR2 (100)
  4, NUMBER of sal
  5, job VARCHAR2 (100)
  6*   );
  SQL > /.

  Type of creation.

  SQL > ed
  A written file afiedt.buf

  1 DECLARE
  2 r_emp ty_emp: = new ty_emp (null, null, null, null);
  3 BEGIN
  4 r_emp.empno: = 1001;
  r_emp.ename 5: = "Adams";
  6 r_emp.sal: = 5000;
  7 r_emp.job: = "MANAGER";
  8 dbms_output.put_line (XMLTYPE (r_emp) .getstringval ());
  9 * END;
  SQL > /.
  1001 Adams 5000 MANAGER

  PL/SQL procedure successfully completed.

  SQL >

• CC Desktop App for the Government concerning: the end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  Desktop adobe Creative Cloud for government applications :end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  1. They will be able to download and activate the installation package through CC e package on Internet workstation and transfer with a USB flash drive on a workstation Intranet , hence they can deploy desktop applications to end-user desktops CC?
  2. The deployment of renewal process will work the same as above?

  Government accounts https://forums.adobe.com/thread/1483694 can help

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  or

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  Creator of Enterprise Cloud https://forums.adobe.com/thread/1489872 License Restrictions

• "administrator 'vs 'standards' with respect to records available to the same person." (Vista Home Premium)

  recent viral infection requires me to ask for more security that I have used before. How to make the most of the files that I have as a standard user are available to me as an administrator? Should I make it 'public' on my home network? Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  recent viral infection requires me to ask for more security that I have used before. How to make the most of the files that I have as a standard user are available to me as an administrator? Should I make it 'public' on my home network? Remember - this is a public forum so never post private information such as numbers of mail or telephone!
  
  Please explain a little more.
  What type of files that you, as a standard user, are unable to access, but you, as an administrator, can?
  All you have to do is enter the admin password before you can get the file. Yes? Or am I missing something? For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot complete the process of backround with force as an administrator. Even with administrator privileges. More details inside.

  I have a question. Im trying to kill with force an Application that is running in the backround (Skype.exe) process using the administrator command prompt using taskkill /f / pid 1580, which is the pid of the program). Whenever I try to kill the process, it gives me an error that says that "the process with PID 1580 could not be completed. Reason: Access is denied. Basically, I'm the only user on this computer and I all administrative rights that it meal. Ive, run the command prompt and the Manager of the tasks as an administrator. Ran a/scannow in command prompt. Basically, Skype is corrupted and won't let me sign in, it says "Skype is already running on this computer, disconnect and try again". I am not connected to Skype, uninstalled, re-installed with the same error. I tried to remove data from application of Hidden manually, with no success, because "a program in this folder is running" that's why I'm finishing the process Skype.exe. There are 2 current Skyoe.exe process, it is hidden and we're not. I have no idea what another o addition to restart in safe mode, and I don't even know where to begin here. Mess using the BIOS im afraid ill something upward. It's really annoying, please help.

  System Specs:
  Computer: HP Envy M6 1105-DX
  OS: Windows 8
  : A-10 AMD processor series
  RAM: 6 GB OF RAM
  GPU: AMD HD Radeon 7660g

  Yes. But I thought about it. It was taskkill/f/PID 1580 after reboot total sytem line cmd running in mode sans-echec as admin, after having used/scannow. I was then able to remove all records of hidden data app, re - install Skype and it works fine now.